Get a fail for lack of default-568@2x.png

Similar Questions

• Backup on USB fails for lack of space; but it's a blank disk and there is no files on it!

  I have improved my NV + v1 (4.1.14) with 4 x 2 TB drives and I met the 4 k block size problem. So I'll try my backup device so that I can factory reset it.

  The current size of the volume is 1.3 to, so I took on one of the 2 TB drives to use as a backup via USB. 1.3 TB should fit easily in 2 TB, right?

  I added the 2 TB drive to the front USB port and formatted in ext3, it shows very well in stocks and a space free expected.

  So I made a backup and the source = task share / dest = USB/Sharename/and he ran.

  It works for a few minutes and stops with this error:

  Encountered error copying data from the source ==> /USB_HDD_4_1 path / / bla due to lack of disk space. [Job 003]

  I look at the USB and it is FULL. Zero byte available. He made a few records, but they are all empty.

  What is going on?

  Are there hidden files (.appledouble, etc.)? I ran BlueHarvest on the volume before the backup, and he deleted a bunch of them. But not 2 value of TB.

  I use this volume mainly with my Mac... am I missing?

  Any help is appreciated! Thank you

  OK, I got the multiple partition problem.

  When partitioning a disk with Mac disk utility, it creates a partition from FAT32 MASK called EFI which is used for Intel to start. The EFI partition is confusing RAIDiator and leading them to try to use the small EFI partition instead of the large main.

  Since I am not start this drive (it's only for backup), it is safe to remove it. You must enable a debug option to see the partition in disk utility. Google search for "EFI Partition delete on mac" to see how to do it.

  Also, I used EXTfs for mac by Paragon Software that allows you to create and mount ext3 on your mac partitions. http://www.Paragon-drivers.com/ExtFS-Mac/

  Backup operation runs now... If all goes well, it ends with success!

• revokeRoleGrant fails for lack of ADMIN CONFIGURATION role

  Hi all
  
  I am using the APIs and authentication as xelsysadm. I am able to read all of the roles associated with a user
  but cannot remove any.
  
  I get the following error message.
  
  
  oracle.iam.identity.exception.ValidationFailedException: IAM - 3056134:Role ADMINISTRATORS CONFIGURATION SYSTEM is NOT granted to the user operating system. SYSTEM: CON
  FIGURATION DIRECTORS: System operator
  
  I added the CONFIGURATION SYSTEM ADMINISTRATORS role to xelsysadm and ran the api role and he shows up.
  
  I added the role of OPERATORS to a new user, and when I try to remove the role of the OPERATORS of this new user is when I get the error.
  
  Thanx
  Fred
  
  Published by: Foresterf on July 22, 2011 13:33

  Should it not vice versa:

  Try
  +{+
  roleOp.revokeRoleGrant (usrKey, roleKeySet);
  +}+

  Use instead the following:

  roleOp.revokeRoleGrant (roleKey, usrKeySet);

  It must be the Key Role and a user defined

• Acer aspire s7-392-9439: lack of default boot device or startup failed.

  Hello
  I bought an Acer aspire s7-392-9439 3 months ago. It has been working fine, until yesterday.
  I turn on the computer and it poped a blue screen with the error: 'lack of default boot device or startup failed'.
  This error reminded me that a message on a bios updated poped over a few days and I have the chance to install it.

  I contacted acer support, I was told that the update of the bios would have avoided this problem. Also, they told me to try things that can help, but unfortunately none of them has:
  1 restore the default bios settings.
  2. change the bios settings: uefi to legacy.
  3 type the Windows key + c when the computer starts.

  When these options do not have they said it is probably a hardware problem and I should send my computer to their repair center.
  My questions are:
  1. If they updated bios would have prevented the problem, how can it be a hardware problem?
  2 - does anyone know how to solve the problem?

  I would appreciate your help,
  Michael

  I had the same problem.  Tried the diskette of starting BACK and did not work.

  Here's how I solved it:

  (apologies to memory are some terms is not on-site)

  1. download the Setup file of the BIOS - link provided above in this thread (isST2212.exe)

  2. on a Windows 8 machine that works - search for 'Create a recovery disk' and run on a USB drive

  3. copy the file #1 to the USB drive once it's done make a recovery disk

  4. in the Acer BIOS (press F2 during startup), change to the method of priming of the legacy

  5 save and exit

  6. turn in the BIOS and move the option USB HDD as first boot device

  7. Save and exit

  8. you will end up in a Windows 8 recovery console

  9. go to Advanced Options - find the option that leads you to the command prompt

  10. from there I went to d: drive and found my file isST2212.exe - run by typing the file name when you are in the folder

  Make sure that you are connected to power - let it run.  It should install, automatic restart and you should be in business.

  I had an Acer offer to fix it for free with a 7-10 day turn around and at the risk of losing all my data.  It's a much better solution!

• When display downloaded images of camera get for lack of protection of the QTPJPEG. QTC

  Hi, I downloaded Photo from my camera and when I try to view them I get a QTJPEG for the lack of Protection. QTC to 0002; 1c2c
  Can someone help me

  I guess just... but maybe your QuickTime Viewer tries to open the pictures.

  Something to try...

  Right click on one of the photos (the file name or thumbnail) and in the menu select...
  Open with / WIndows picture and Fax Viewer. If there is an improvement... define the
  Windows Picture And Fax Viewer as the default viewer for your photos.

• How can I get Adobe Photoshop to be my default program for windows 7

  I can't get Adobe Photoshop to be my default program that Photoshop will not import my card

  Do you mean making Photoshop the default program to open the photos as jpeg files?

  Try right-clicking on a photo (jpeg) file, click Open with. Glance for photoshop in the list. Then check always use this program to open this type of file. I'm not sure it's good that the exact wording. And then click OK.

• Code 8024200 D Windows Update has encountered an unknown error. I get this message for both updates and windows failed to install.

  Code 8024200 D Windows Update has encountered an unknown error.  I get this message for both updates and windows failed to install. Can someone help me?

  Hello SammyFlo,

  Take a look at the following thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/getting-a-Windows-Update-error-80070490-when/1f53aa2e-238C-488C-a952-cef7c9b7cc87

  Let us know if that helps.

  Best regards

  Matthew_Ha

• I get an installation failed for photoshop, illustrator and caused - payload: package redistributable Microsoft Visual C++ 2012 (x 64) 11.0.61030.0 {3E272A93-C06B-4206-AD02-0EBE02535E20}---ERREUR: third party useful Installer revealed

  I get an installation failed for photoshop, illustrator and caused - payload: package redistributable Microsoft Visual C++ 2012 (x 64) 11.0.61030.0 {3E272A93-C06B-4206-AD02-0EBE02535E20}---ERREUR: third payload Installer vcredist_x64.exe failed with exit code: ERROR-2147024546: cannot install the Microsoft Visual C++ 2012 Redistributable Package (x 64). Please try to install by double-clicking the executable file to "C:\Users\randy\AppData\Local\Temp\{2246675D-5215-4CA7-BE30-569ED38C5D9B}\Photoshop_15_LS 20_win64\Adobe CC 2014\payloads\Microsoft VC 2012 Redist (x 64) \vcredist_x64.exe", or download and install the 2012 Microsoft Visual C++ Redistributable Package last (x 64) Microsoft Web site - www.microsoft.com

  Go to control panel > programs > program and features.

  under programs and features, look for the option "Microsoft Visual C++ Redistributable Package (x 64) 2012" and do a right click on it and uninstall it.

  If you are prompted, restart, and then uninstall.

  Once you had uninstalled package redistributable Microsoft Visual C++ 2012 (x 64).

  Click on the link below and the new download Package redistributable Microsoft Visual C++ 2012 (x 64) (vcredist (x 64) .exe file and install the same):

  http://download.Microsoft.com/download/1/6/B/16B06F60-3B20-4FF2-B699-5E9B7962F9AE/VSU_4/VC redist_x64.exe

  Once you had installed successfully Vcredist_x64.exe, desktop application Cloud Creative throw and try to install the CC apps.

  Let me know if you need more assistance.

• installation failed for cc, error code: 1 - tried all laptop troubleshooting, new and previously installed before doing a system restore...

  So I'm running a new laptop with 64-bit Windows 8.1.

  I installed creative cloud when I arrived to the laptop and it was fine, no problem!

  I then had to perform a restore of the system because some automatic updates, which caused problems.   Now when I try to install again creative cloud, it downloads and then the second, he starts to try to install, I get the installation failed, error code: 1 message.

  I have tried all troubleshooting, which is to run the Adobe CC cleaning tool, restart the system, download CC, run as administrator, same error code: 1 message.

  I am also running as user administrator so nothing to do with it.

  I have no idea which continues to cause this, have tried everything suggested without success, and the must frustrating, is that once he has actually worked!  My laptop is completely up-to-date with all windows, events, recommended, and optional updates.

  Please can someone help me?

  I really appreciate your answer fast to my query and please don't take this the wrong way, however I stated clearly my opening message that the solutions proposed in the link you sent me in case of problems did not and yet you have sent to me in any case what is frustrating, as I hoped I had taken the time to explain what I had already tried without success as clearly as possible.  Your suggestion to search the forums for other solutions was my last course of action before coming to my last resort to put the request here for expert advice.  I understand that many folk do not do this on the forums so I don't understand your direction here but unfortunately in my case it didn't there no alternative solutions to my problem in the forum.

  Fortunately after hitting my head on the wall for the last 4 hours, I managed to find the solution for me and I want to share it for the sake of others who may be in the same position.

  The problem revolves around turning off the obligation to enter a password when you turn on the computer and enter windows 8.1.  Even if you are still an administrator and car windows of the signs that you, this seems at odds with the Adobe Creative Cloud installation process.

  To remedy the situation:

  Hold the Windows key and press R.

  Type NETPLWIZ and press ok/return.

  Click on the check box besides "users must enter a user name and password to use this computer" to ensure that a tick is visible.

  Now when your restart the computer, you will need to enter your password before windows starts.  Download Adobe CC and install.  Problem solved.

  For what it's worth, I did use the cleaning tool Adobe CC as well before the restart and install but I doubt that this is necessary (and certainly did not help at all until I have reactivated the password on windows starts).

  I'm sure it's just windows being usually a pain and not really for lack of Adobe, but it must be said that I had no such problems with other software downloads and installations to date.

  I hope that is a valuable feedback to Adobe and will help them avoid an unnecessary barrier to new customers who buy their products.  I must admit, I was near you are looking for software elsewhere.

• put db failed for "cannot allocate memory".

  Hi exports BDB.

  
  

  I met a problem that put the db failed for "cannot allocate memory". From cmd shell "ps", consumption of memory app was not high, it seemed that just BDB can not allocate memory. Here are my questions:

  (1) if use get db or slider with DBT indicator 0, where BDB will allocate memory? (DB cache?)

  (2) I put in cache 16 MB by db_env-> set_cachesize, there are about 10 databases in the environment, it means all the cache 16 MB part 10 db or each has 16 MB cache?

  (3) if there is no memory leak in the app, what would be the possible reasons for "cannot allocate memory"? How I debug this?

  (4) a database in the application has about 100 k records each about 500 bytes data, this database must be walked several times by the cursor. If use DBT indicator 0, will free the memory allocated by the cursor immediately after the cursor close? How much memory would be allocated during the crossing of the database?

  (5) cache is multi-threaded safe? If one thread changes the memory allocated by the BDB using cusror get with DBT indicator 0, other threads bed dirty data possibly?

  BRS,

  Min

  Hi Min,

  The error "Cannot allocate memory" can be caused by using a lot of resources, whereas you allocate spaces for them in advance, resources include locks, mutexes, etc.

  (1) the memory will be allocated heap if you have not defined a function alloc.

  (2) all databases in an environment share the same cache (16 m here).

  (3) as mentioned, the error can be switch to the allocation of lock, mutex, and other resources. You need get the exact location where the error occurs.

  (4) I think that you asked the question on the DBT indicator 0. The memory will be allocated from the default heap and be linked to the cursor. It's transitional, which means that it can be overwritten by the next HBD-> get and released until the cursor closes. More information can be found here:

  https://forums.Oracle.com/thread/2560134

  The simple description of the program, the error seems to be caused by not enough definition of locks and lock objects. Page latch is usually used by Berkeley DB, and if you enable the locking subsystem, by default each page will be locked until the cursor closes. If your database has a lot of pages, then several locks and lock objects are needed, so set the number before opening environment, since the number (1000) default may not be sufficient in this case.

  To avoid setting so many locks and locking of objects, you can try the DB-> set_lk_exclusive, because it hangs on the database instead of pages.

  Another way is to restructure your program to divide operations both in number of sliders/transactions and begin the next curor/transaction after previous finishes. And if you use only the sliders to make so many read operations, you can also evaluate a level of isolation as DB_READ_COMMITTED instead of the default level, and it can avoid divide.

  This thread can help you on this:

  https://forums.Oracle.com/thread/2557981

  5 data from HBDS-> get flagged 0 failed with the cache. Cache is thread-safe to provide write atomicity. If you care about the consistency of your program in environment multi-threads, you must turn on locking and transaction subsystems.

  Kind regards

  Winter, Oracle Berkeley DB

• I can't attach photos, etc. to e-mail. Always get a failed"" message.

  I can't attach photos, etc. to e-mail. Always get a failed"" message. I end up having to use Safari if I want to attach anything to an e-mail. It happened for about 6 months I think. I used to be able to fix things to the emails with Firefox. But not for a while now.

  Hello

  Many issues of the site can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
  Note: This will be you temporarily disconnect all sites, you're connected to.
  To clear the cache and cookies to do the following:

  1. Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
  2. Under "Time range to clear", select "all".
  3. Now, click the arrow next to details to toggle the active details list.
  4. In the list of details, see the Cache and Cookies and uncheck everything.
  5. Now click the clear now button.

  More information can be found in article to clear your cache, history, and other personal information in Firefox .

  This solve your problems? Please report to us!

  Thank you.

• Visa for lack of playback Associates research Hipot 3765

  I'm building a test bed for my motor company and we want to control a partners research Hipot 3765 through labview to automate the test procedure. A few days ago my colleague sent me a driver that works in another facility for their test bench using the same equipment. When I first passed the pilot in my main labview VI everything worked well. When I got home Monday I received the "caveat 1073676294 took place at VISA Read AR Hipot III basic series writing and Read.vi". I've seen other places on the discussion board suggesting to ignore the warning, because this is just a warning. The real problem is that the machine does not return no data (success or failure) to the computer. Even if I ignore the warning, I'm not getting back reading for the VI hand knows that he has to continue the test procedure. The joint written fine VI, as I can set the test parameters, see actually the Hipot run the test on command, and the display on the hipot said pass. After that, it seems to be a lack of communication between the computer and the Hipot. Any help is greatly appreciated!

  Nevermind Hipot was broken

• Online and automated phone activation fails for XP Home

  Activation fails for me for Windows XP Home Edition, after changing a lot of material. Online activation failed. I called the automatic activation phone number where I give them a "ID of Activation" appears on my screen and I like that it is not valid. Microsoft support site sends me to a web page that sends me to a web page that sends me to the first web page.

  How do I get this active?

  How to activate Windows 7 manually (activate by phone)

  1) click Start and in the search for box type: slui.exe 4

  (2) press the ENTER"" key.

  (3) select your "country" in the list.

  (4) choose the option "activate phone".

  5) stay on the phone (do not meet all the automatic guests) and wait for a person to help you with the activation.

  (6) explain your question clearly to the support person.

• Can I get a download for Windows XP Pro sp1

  Can I get a download for windows xp pro sp1. I have no internet on the other pc that im going to but sp1 on it, but sp2 does not work because I get a blue screen and sp3 does not cause I get a blue screen. The computer is a Hp d530 sff. I want to just reinstall the entire system please help me

  HP - the restoration of the order of the discs for Windows 7, Vista or XP
  http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=en&cc=us&DocName=c00810334
  For computers manufactured and sold in 2006 or later, based on the Microsoft license agreement, you can create a personal recovery disk to restore your computer to its original operating system.

  HP support: Phone numbers: http://www8.hp.com/us/en/contact-hp/phone-assist.html

  View together to recover the operating system or the operating system reinstallation
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00006110&LC=en&DLC=en&cc=us

  Performing a recovery of the system to return the computer to its original state
  may require that if the operating system is corrupted, the hard disk is damaged.
  or the computer is infected with a virus.

  Performing a system recovery deletes all software and files saved on the hard drive.
  Reinstall the original operating system, and then configures the settings for default programs.

  Since the merger of Compaq and HP, several recovery methods and different tools
  The names for these tools include: Solution of recovery, Recovery Manager, F11 restore disc.
  Driver and Application Recovery Disc, Roxio BackOntrack, Microsoft Backup & Restore.
  provided for the recovery of laptop computers to their original state.

  To help you select the correct recovery process, the table contained in this web site base article
  identifies the different models, the time when they were produced and sold,
  In addition, operating systems initially configured.
  Click on the document name in the column on the right for detailed information.

  J W Stuart: http://www.pagestart.com

• Windows update fails for KB2661637; KB2647516 and KB2660465

  Windows update fails for KB2661637; KB2647516 and KB2660465 - I ran MicrosoftFixit.wu.Run and get the same results.   Help, please... thnx

  Hi SparkySA,

  Follow the steps in the article.

  Cannot install Windows updates

  You cannot install some programs or updates