Get a glimpse of Windows 8 at 8/8.1

Similar Questions

• Windows 10 techniques, get a glimpse of Windows 8

  I went to the settings and I chose "return to a previous version of windows" and I said I can't go back to a previous version because the files have been deleted. Is there a way I can downgrade to windows 8 because it runs windows 10 slow in my laptop?

  How can I getbthe product key? Windows 8 has been factory-installed in my laptop

  You will need to use a Key Finder like Magic Jellybean or Winkey Finder

  http://pcsupport.about.com/od/productkeysactivation/TP/topkeyfinder.htm

• error cannot create an extract from dvd when trying to get a glimpse of film in dvd creation

  * - Original title - dvd creation

  When I try to get a glimpse of my film in creation of dvd, I get a message "crΘer one cannot extract dvd.

  Hello

  1. were you able to preview before using create DVD with no problems?

  2. What is the exact error message you get?

  3. this happens to all types of files?

  4 does occur for the sample videos?

  a. you can access the sample videos by clicking on start, click computer, and then click the videos section under libraries.

  b. try again with another DVD and see if you can get a preview of the content.

  I suggest you to refer to this article and check if that helps.

  Problems with creating a DVD-video using Windows DVD Maker: http://windows.microsoft.com/en-US/windows7/Troubleshoot-problems-with-creating-a-DVD-Video-using-Windows-DVD-Maker

  I hope this helps.

• Why can't I get a glimpse of the indd files in the dialog box to open InDesign?

  Hi all

  It is unfortunate that Adobe does not add a plugin to display a preview of any Adobe source file in Windows Explorer (I mean, except for the PDF but I think that Microsoft did this).

  But I think it's ridiculous that I can't preview the source .indd inside the dialog box to open InDesign files. He says just, "no preview available". I am sure that this failure is related to what Windows can preview... again, not a good excuse!

  It is also the same problem in Illustrator and Photoshop... or program Adobe can get a glimpse of their own file format!

  WHY?  OR how can I fix this?

  [UPDATE: SageThumbs |] [SourceForge.net seems to partially work on several Photoshop files (works reasonably well as long as I limit the file size to 70 mb), it doesn't seem to work with Illustrator files (despite the claim), and it does not work on InDesign.]

  Yet the question remains: why Adobe is not taking responsibility for this?

  I think that for the dialog open regularly, Adobe wants to use operation

  Open the file integrated system of dialogue, so that users are familiar with it.

  and also if they can use the peculiarities of their OS (Windows vs

  Mac have different habits).

  And to solve your problem, they created Bridge (and even Mini Bridge).

  He could theoretically get into the habit to use to open the files,

  That is, instead of file > open it just click on the bridge icon.

• I get the pop-up windows and windows that automatically open on my browser, how can I solve this

  I get the pop-up windows and windows that automatically open on my browser, how can I solve this

  Do a scan for adware with Malwarebytes: http://malwarebytes.org/antimalware/mac.

  (copy and paste the link above into the address bar of your browser).

• Just recently, I receive the following error message when you try to access the web sites. I get a pop-up window indicating "Exc in ev handl: TypeError: c.location is null" then I have to click ok. There is a problem with some plugin?

  Just recently, I receive the following error message when you try to access the web sites. I use Firefox browser version 10.0.2. I get a pop-up window indicating "Exc in ev handl: TypeError: c.location is null" as the web site page is displayed in the browser winder. So, I have to click ok. Any link/website I go to what happens. There is a problem with some plugin?

  It is only a problem for the SiteAdvisor users who are still on 3.4. This problem is resolved in the latest version of SiteAdvisor, which is 3.4.1.195. Go to http://siteadvisor.com and click on download. This will fix the problem.

  Meanwhile, SiteAdvisor team will push down a JS update in the coming days 1-2 to automatically resolve this problem in version 3.4.

• I get a pop up window that says 'URL cannot load. What gives?

  At random, well-known sites, I randomly get a pop up window that says: "The URL is not valid and cannot be loaded." Firefox loads the site but I have to click outside the pop-up to go forward.

  What gives? I am running Windows 7 on a new computer HP laptop

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of your modules is causing your problem (switch to the DEFAULT theme: Tools > Modules > themes).
  
  See the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems and troubleshooting questions with plugins like Flash or Java to solve common Firefox problems
  
  
  
  If this does not work in safe mode and then disable all your extensions and then try to find out who is causing by allowing both the problem reappears.
  
  You can use "Disable all add-ons" window the startup of Firefox to solve the issues in Safe Mode to disable all extensions.
  
  You will need to close and restart Firefox after each change via "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')

• I get reimage opening new windows in safari instead of the links I clicked. I tried the force of suggestion smoking etc and uninstall without success. It seems very little help on this in the normal search engines. Any ideas?

  I get reimage opening new windows in safari instead of the links I clicked. I tried the force of suggestion smoking etc and uninstall without success. It seems very little help on this in the normal search engines. Any ideas?

  On the one hand, you cannot uninstall Safari.  It comes as part of the operating system.  So, I don't know what you've done or what you think you did, but this is not that.  Could you explain more by what you mean with "I get reimage opening in a new window?  You can post a screenshot of what happens?

• the great Apple player gets no disc in windows 7

  New tile Turbo not mount or boot into Windows 7. I have the partition Boot Camp with Win 7 and El captain on separate partitions. The Turbo Tax 2015 mounted on the side of Apple, but will not rise on the Windows side. Have used this partition in place with this computer comes during the last five years. IMac, early 2008 with 4 GB of ram. Win 7 shooters of boredom for a cd/dvd drive are not useful. Probably a driver issue, but I'm not sure how to get the update of Windows driver for a disk of Apple.

  If you use one of the iMac listed below, you must download the Boot Camp 5.1.5640. software

  iMac (end 2013)

  If you use one of the iMac listed below, you must download the Boot Camp 5.1.5621 software

  iMac (mid-2010 - end of 2012)

• Get reliability permissions Vi - Windows 7

  Sometimes I wrong results to get permissions VI on Windows 7

  VI reports I have not the right to write to a folder, but I can't.

  For example, I "101101101" for C:\Users, but I can't.

  Why is it?

  Is this because as a user, I can not write in C:\Users, but as a member of the Administrators group, can I?

  As says help "using the permissions setting is very limited on non-Linux operating systems.

  but it could get completely useless Vi on Windows permissions.

  Marco

  Windows has two different systems that control access to the files. The first is a simple Boolean attribute that specifies whether a file is protected or not writable. It is a relic of BACK and which is essentially permission them. The second is the base ACL security system which introduced Windows NT (borrowed heavily from the DEC OS). This is where your administrator accounts and administrator etc come into play. Get the permissions of files does basically nothing with this information because it is rather difficult to interface from an application user and notorously bad documented.

  Windows itself is not always consistent in how it treats these two things. Explorer itself makes all sorts of tricks involved to bypass these obstacles but fails sometimes short too. At the time LabVIEW was brought from the Mac on Windows and Unix, the write protection indicator was all Windows supported. Access Unix system right was simple but supports a particle size fine enough separation between users, groups, and everyone to read, write, execute flags for each of these groups. On Mac, it was just a little more complicated than on Windows, but not as full featured as Unix. Thus, the permissions of the file Get was modeled around the Unix system that allowed most of the features and others have been adapted to keep his friends, who for Windows simply meant that everything what to write protection of files was not available.

  The more recent NT based access control system does not at all fit in this interface and trying to shoehorn this in the node to get the permissions of files is just not a feasible option. And changing into a much more complicated node which can manage all the features of NT security did not apparently come as a priority so far. Add to that, that such an interface is difficult to understand for most of LabVIEW users as even system administrators struggling with him and you can see why there has not been much effort on this until now.

  You could say it's a bug, but then the bug is in the GetFileAttributes() API Windows function that does take itself really into account control lists of a file to the current user in the determination of the protection status of writing a file.

• 4540 proBook s: can I get the drivers for windows 10 for my probook 4540 s

  Can I get the drivers for windows 10 for my 4540 s probook

  Windows 10 will include more if not all the necessary drivers, just installed on a HP PC and has each of them with the exception of the guard hard drive software, if one is missing in Device Manager, Windows 7 drivers should work.

• Recently I have not been able to burn a CD with Windows Media Player: I get an error message: "Windows Media Player cannot find the file."

  Hello

  I recently haven't been able to burn a CD with Windows Media Player (he worked last week, but not now). I get an error message "Windows Media Player cannot find the file. The link between the library item and its digital media file associated with may be broken. "Try to fix the link or delete the item. There is a web help option which says that to fix a link, you click on the blue icon next to the item, then click "Browse this article. But the only icon I see is a little blue triangle next to individual songs in the library pane or list, there is no icon next to the name of the playlist. Although the click with the right button on the blue triangle gives me a few options, "Browse this point" is not one of them. Does anyone have any ideas what is wrong and how can I sort it please!

  Rick

  original title: burning a CD problems

  Hello

  
  (1) what version of Windows Media Player do you use?
  (2) what is the model of your CD burner?
  (3) you have the latest drivers for the CD burner?
  (4) what type of file you are trying to burn?
  (5) you receive error codes?
  (6) what version of the operating system is installed on the computer?
  (7) we get to a particular file?
   
  
  Method 1: You can try to update the drivers of your CD burner visit the manufactures Web site.
   
  Method 2: You can try to remove the CD, and then insert another CD and try to burn another file and check if the problem persists.
  
  Method 3: You can also check out the link below:

  Windows Help and procedures: burn a CD or DVD in Windows Media Player: frequently asked questions

  I hope this information helps!

• Is it possible to get the files for windows vista, so I can reinstall my system?

  Hello

  Im a user of linux on one machine HP Pavilion dv5-1095eo leisure. IM tired to restart my machine to run a windows OS, so is possible for me to get the files for windows vista. I got the windows key attached under the computer and I don't have any windows CD when I brought the machine.

  Hello:

  You can do your own installation disc Vista too if you wish.

  If you can read your 25-character product key MS, you can make your own Windows Vista installation disc. You just download the 3 files you need on the link below and read all the instructions to create a Setup bootable DVD disk using imageburn.

  When I went to compile the ISO file, ImageBurn gave a message on a WIM file, file and ISO, and if I wanted to burn it in a different format.

  I selected no, make the ISO file.

  It was not so hard to do. I burned both the disk of 64-bit and 32-bit disk in case I ever need them.

  I tested both of them (just before going forward with the actual facility) and they seem to work perfectly.

  Apparently, when you enter the product key, he knows which version of Vista you have.

  http://en.community.Dell.com/support-forums/software-OS/w/microsoft_os/3317.2-3-Microsoft-Windows-VI...

  After you have successfully installed vista, you can download the drivers you need your PC support and driver page.

  Paul

• How can I get automatic updates for windows xp drivers easily?

  How can I get automatic updates for windows xp drivers easily & no frills?   in the same easy way for windows 7

  Thank you, appreciate it.

  Hi Abdellah,

  1. what happens when you try to perform automatic updates?

  2. were you able to perform before automatic updates without any problems?

  Method 1:

  You can read the following article and try to reset the Windows Update components and check.

  How to reset the Windows Update components?

  Method 2:

  You can also visit the computer manufacturer and try to update the latest version of the drivers for all devices.

  How to manage devices in Windows XP

  Also refer to the following article to improve the performance of the system.

  Slow PC? Optimize your computer for peak performance

• Get the error message "Windows must be enabled before you can connect. You want to activate now.

  Original title: impossible to activate Windows XP

  I had to reinstall XP Professional. Now, when I start the computer get a message saying "Windows must be enabled before you can connect. You want to activate now? ». When I click on Yes, the desktop backround sometimes nothing happens. the activation wizard does not open and no error message appears always.

  Hi Dale,

  Since you are not able to open a session in normal mode, log in in safe mode and perform a few steps that would help you solve the problem.

  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

  Perform the steps mentioned below and see if it helps.
  a: turn on your PC
  b: Press F8 repeatedly , then in Mode safe
  c: Logon as per normal
  (Note: administrator password is usually empty, but I hope you know your password)
  d: Authorize the Office to load completely (who answered "Yes" to continue mode without failure)
  (Note: this is just a long way to say go to Safe Mode)
  e: Click Start - run
  f: type exactly: rundll32.exe syssetup, SetupOobeBnk (then click OK)
  (Note: a single space after 'rundll32.exe' also the Oo are two letter o in "oobe"; capital and the comma are important)
  g: Wait a few seconds (although you won't see any change)
  h : Restart your PC normally (start - stop - restart - Ok)
  i: You will be able to return to the Normal Mode.

  Good day!

  Answer please if you have any questions.