Get a new graphics card.

Similar Questions

• Get a new graphics card for the HP Envy 700-214

  Hello

  So I tried to get a new graphics card for my HP Envy 700-214, but I'm not aware if this map is compatible or if it would have a negative impact on my system.

  http://www.GeForce.com/hardware/desktop-GPUs/GeForce-GTX-750-TI/specifications

  I don't want my system to be harmed in any way.  Here is the link to the computer.

  http://support.HP.com/us-en/document/c04100558

  Thank you!

  Wolfking98, welcome to the forum.

  Here is the video card manufactured by EVGA.  It shouldn't harm your system somehow.  However, if you have trouble with the installation, you can contact their Technical Support (1-888-880-3842) or online.  They were very useful for me.  Read the reviews to see what users have to say about it.  As you can see, there are a lot of comments and appreciation 5 eggs.  You can't do better.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Satellite A100-02 can b - I get a new graphics card?

  Hello people,

  A few weeks ago my, unfortunately 2 years and 2 months old, Toshiba Satellite A100-02 b surrenders completely.
  The graphics card (I hope its called like that in English) and the display crashed...

  My question now is: is it possible to get a new card?
  I can't find a fitting Geforce GO 7600 grafic cards...
  That's why I'm asking here:

  where can I buy such a grafic card - or: is there another (better) available grafic card which correspond to this laptop?

  I hope you people can help me with my disaster :(

  your welcome
  Germany :) Cornell

  Hi mate.

  Unfortunately, you can not replace the graphics card.
  If the graphics card is dead, then the whole motherboard must be replaced.

  It s is no more possible to upgrade the GPU chip. It s simply welded on the map and there is no chance to remove it.

  If you are sure that your graphics card is dead, then you'll need for the new motherboard which is not good cheap 100%

• Try to get a new graphics card to work...

  I have a GeForce GT of 640 that I try to install in my office p7-1414.  Problem is it seems to have some sort of conflict with the integrated graphics card, as when it is installed in the slot of PCIx16, NONE of the screens will be exploited.

  It doesn't seem to be a way to disable the onboard graphics via the BIOS (AMI Bios 8.04), and I know that the card works as it still works with the office, that I recently tried to replace.

  Any help on this would be greatly appreciated.

  Here are the specifications of your desktop HP Pavilion p7-1414. According to specifications, your system comes from the factory with a 300 Watt power supply. Review the specifications for graphics cards of TG 640 indicates they generally recommend a minimum of 350 watts system power supply. Although this is not the only problem, it's a start. There is no option in the BIOS to disable the onboard graphics on board, as this is done automatically when a PCIe x 16 card into the PCIe x 16 slot.

• Pavilion HPE - 533 sc: installed new graphics card. Hard drive stops

  In order to improve my graphics performance for games that I invested in this graphics card:

  NVIDIA gtx 950, links shows the map and specifications:

  http://gadgetsngaming.com/2015/08/21/nVidias-GTX-950-at-160-easily-beats-750ti-in-1080p-gaming/

  How fitting the screen stops at initial HP logo and "press ESC to start menu.

  I can also clearly see that disk hard fails or starts the Windows 7 Edition operating system home premium.

  I am running Nvidia GT 630, and back on this card machines works well again.

  It just loks like the new graphics card prevents the hard drive to run.

  All attached cables (power cable 6 pin) and locked firmly into the PCI slot.

  Is it possible that the new card draws so much power that it prevents the hard drive of the race?

  When you press ESC, it seems that the hard drive is registered in the Bios.

  This nvidia gtx 950 is better? It seems to be more the size of the one I have - nvidia GT 630. Link shows specifications.

  http://videocardz.com/NVIDIA/GeForce-900/GeForce-GTX-950

  *

  First of all try to help me, please do not write that I should get a new machine - I thought that, despite this current have worked without any problems for 5 years now.

  Do not forget that I have to install a lot of programs and to transfer other data - it would be nice to avoid this.

  If if can not be fixed - which stationary HP desktop computer (I have a laptop) can have the new nvidia gtx 950 mounted?

  http://store.HP.com/us/en/PDP/desktops/HP-envy-Phoenix-810se-desktop-j6n64av-ABA-1

  or this

  HP Pavilion Desktop-500-585no

  Thanks in advance

  I'm not familiar with current PC for sale, regarding upgrades.  Since is considered a new HP, try looking at the list of options on the HP website.  Most higher end PC have the options that you choose before buy you, to customize the generation.  Choose a model with options that match your criteria now and notice the upgrade options - write down them - to avoid confusion later.  OR go with a customized version, but this could mean significant spending.  It is the hand off the coast between prebuilts and personalized.

• Do I need a new graphics card

  I have a HP Pavilion Slimline s3400f running Windows 7 32 bit.  I have a HP x 2301 monitor.  I need a new graphics card to take advantage of the speed of 3 ms of the monitor?  I can renovate such a card?

  Hello

  Very nice monitor. The HP Slimline s3400f PC has only a power of 160 watts power is a big problem for the addition of a discrete video card that would allow you to use digital instead of analog video video.  You will see an improvement in the quality of the image with the digital video.

  It is possible to replace the power supply and add it to a profile low low-power video card.

  Contact Athena and get a recommendation of the PSU. HP Slimline power of Athena. There are also mini-ATX converter cable.  If you get a 220 watt PSU then the below video cards should work.

  Look here in HP Partsurfer for video cards that are used in the new Slimline models with a 220 Watt power supply.  These cards have been made specifically for the HP Slimline PC with a 220 watt power supply.

• new graphics card for a desktop Pavilion p6657c PC

  This computer has a 250 watt power supply. I want to get a new video card with more specialized memory (1gig) to accelerate a business program. The operating system is windows 7. CPU is AMDAthlon II x 2 220. It came with an nvidia GeForce 6150SE nForce 430, with 256 MB of memory dedicated.

  All I can say is that people have added this card on power supply less than 300W.

  You can take the risk or not.  Your choice.  I can't tell you what will happen in your specific PC, because I don't know what other material there.

  Personally, I think that the card will work fine, or I would not have recommended it.

  Manufacturer of the video card normally overestimated the supply needs of power for their video cards, so they don't get a lot of complaints from people saying that their video card blew their power supplies, etc.

  For example... I use an AMD Radeon HD graphic card 6670 in my HP 8200 Elite CMT PC business.  The card called 66 Watts max.

  AMD said that you need a 400W power supply and my PC has a 320W power.  It's a 80 Watt shortfall.

  I ran it like that for 3 years with no problems whatsoever.

  I have two AMD Radeon HD 6570 in 2 other of my business office.  AMD says that you need a power of 400 Watt for those too, and I've been running both of these other PC with 320 W P/S for the same all about 3 years with no problems at all.

  HP offered the AMD Radeon HD 6450 in the 8200 Elite small form Factor PC, which has only a 240W PSU. AMD says you need a 400W power supply to run this card.  See page 2 of the PC data page and page 15 for graphics cards offered in the form factors.

  http://WWW8.HP.com/h20195/v2/GetDocument.aspx?DocName=c04313388

  This is the power of AMD for the HD 6450 requirements... see the support topic.

  http://www.AMD.com/en-us/products/graphics/Desktop/6000/6450#

  If you're still skeptical, I recommend that you either upgrade your diet (I've never done such an update, so I can't help you there), or the use of this handy power supply calculator which will estimate the power supply necessary based on the video card you want and the hardware on your PC.

  I bet you will see that he comes up with a value less than 300W.

  http://www.extreme.outervision.com/psucalculatorlite.jsp

• My new graphics card

  Hello, I recently bought a new graphics card (EVGA GTX 660 SC 2 GB), it was my first time that I ever changed a computer and I had no idea how much research and time that you had to put in to see if your computer is compatible with the graphics card, you buy, then when he arrived I sent it to a store to get mounted and the man who was normal he said that power is not enough to manage the graphics card, so he tried with better food and still there is no possitive results so I was wondering if you could check my pc and see if a 660 GTX would be compatible with my PC Thank YOU! :
  
  Graphics card: http://www.evga.com/Products/Product.aspx?pn=02G-P4-2662-KR
  
  My PC:http://www8.hp.com/uk/en/products/desktops/product-detail.html?oid=6753461#! = form tab

  Hello

  Your PC needs a good 500 Watt power supply.  Review of the article below.

  Computer does not start after the installation of a video (Windows 8) card

• Pavilion p6 - 2020t: HP-Pavilion will identify the new graphics card

  Hello

  I got a HP Pavilion for a few years now and never updated my BIOS (not that I know well). I'm trying to install a new graphics (gtx 750ti) card and the computer does not recognize it. It shows the first screen, and then a black screen and a beep, then it crashes. Keyboard does not work, cannot get into the BIOS.

  I tried everythign with current BIOS, boot legacy and ensuring that the Integrated GPU is disabled, and nothing works. I also did research on food, and but it is not terrible, it should work with this graphics card (the fan even spinning).

  According to my research, the current BIOS is simply not recognize, and I need to update. My current version is: FRIEND 7.16, 05/10/2011

  I navagate through the HP website and it said that the automatic update should update the BIOS for Windows 10, and it won't let me download all drivers (although the last BIOS update was 2011). I tried to enter the FRIEND's site and download it from there and it won't even install their drivers, it says that flash is not supported (probably for Windows 10).

  If someone could give me an idea of how can I get a newer version of the BIOS for my motherboard, it would be much appreciated as I'm pretty sure that's the reason why the computer is not recognizing the new graphics card

  The risk is that the video card is one that is for a newer PC with an EFI BIOS. That's why the empty card is not recognized.

  If you use a card equipped with a switch on the virtual card allowing the use in legacy and uefi BIOS it will work with the BIOS of your PC.

  Sapphire makes video cards that have this capability. Take a look at the catalogue. What you need is a PCIE x 16 card video with switchable legacy\uefi BIOS or legacy support, but not only UEFI.

  http://www.sapphiretech.com/catapage_tech.asp?cataid=8 & lang = eng

  You cannot change the type of BIOS that your PC has in the UEFI.  It's a question of his being of a generation of diferent from the PC.

• No Signal after installing new graphics card

  Hello and thank you in advance for your help!

  We have a 2 years old HP p6540y.  It has an ATI video card integrated. When we recently turned on, we got a message "no signal" on the monitor and then he'd go to sleep.  We tried many things to fix... listed below, in order and are always the same message.  Please advise!

  (1) No Signal: DVI, VGA, HDMI.  So we unplugged and rebooted, no change.

  (2) checked monitor and DVI & VGA cables with another computer: they all work.

  (3) installed new graphics card: NVIDIA GEForce GT 610.  Still got same message "no signal".

  (4) we plugged/unplugged all the other cards/cords / no matter what we could and cleaned.  Then, finally, the monitor turned on! But not for long...

  (5) after you restart the computer after installation of the graphics card driver, we got the 'no signal' message again.  We released once more, other cards/sheets and again once the monitor and the computer came to life.

  (6) we uninstalled the ATI integrated graphics card.  When we go to display, Advanced Options, he mentions our new NVIDIA as graphic/video card.

  (7) we turned computer off during the night and this morning when we have lit, we once agin got the message "no signal".  We have unplugged/plugged computer several times.  Also tried the trick with cards/plugs by pulling and we have nothing.  No Signal.  After doing this several times (about 10), he is finally working again.

  (8) we changed the sleep settings to: screen saver = never; Standby mode = never.

  (9) we restarted again to get once more no signal message.

  So... what should we do?

  Thank you very much!

  Triusa, welcome to the forum.

  I think that your problem is caused by the power supply unit (PSU).  Here's a guide to help you solve the problem:

  http://support.HP.com/us-en/document/bph06788

  Also, the existing PSU is 250W.  The 610 GT requires a minimum of 300W.

  If your problem is solved, please click "accept as a Solution.

• Qosmio G10 with the new graphics card and pcb - CD update tools do not work

  Hello world

  I hope you can help me. Before a few weeks, I received my Toshiba Qosmio G10 return of aid, because the laptop no longer works. So I get it back with a new graphics card and a new PCB. With my laptop I have a CD called the update tool CD and a sheet of instructions, where it says to start with this tool CD-Rom update after you have installed the Windows with the reovery CD.

  So I did, but when I know the update tool CD to put in and I start with it, the computer installs something, but after a short then it is a message that it is a different model and that I have to put a button to close Notepad. So I did it, but Windows does not start.

  Why is it so? I had done everything that has been said on the instruction sheet.

  Please help me

  Hello

  It will be interesting to find more information on this CD-Rom tool update. Are there tags Toshiba? Can you please write what is described here?

• Is satellite A10 - possible to install the new graphics card?

  Hello

  I have a videocard Satelite A10, 2.2 Ghz, 712 MB of RAM, provided with your computer.

  I just bought the Sims 2 and thought from the specifications that I would be able to play on my current card. However when I try to run it it gets to the intro screen and then hangs when it is ready to go into the Menu. My first impressions are that I don't have a pretty good graphics card.

  I need a 32 MB T & L capable card so can someone confirm if this is why it would not work on the system.

  If that's the case I'm looking to see if it is possible to install a new graphics card on the machine I want to play more games to date.

  the map I'm looking at is Sapphire ATI Radeon 9600 XT 256 MB AGP8X graphics card. It will work on the machine and it is likely to solve my problem?

  Thank you

  HI Jeff,

  In General, it is not possible to change the graphics card in your laptop. This is because the graphics cell are generally not a component separated (as with a normal PC), but generally a specific graphic chip attached to the motherboard so make the graphics a part of the laptop.

  At the same time, the graphics driver is normally a specially modified version will omit some of the more esoteric aspects of the normal driver to minimize the risk of overheating chip since it does not have its own cooling system. Given this, you will find probably than trying to load the latest graphic website manufacturers drivers (Nvidia, ATI, etc.) will not work, and you will therefore be limited to these pilots provided by Toshiba on their Web site.

  In order to get your copy of the SIMS 2 to run you need to omit or reduce some of the graphics settings in the game itself, or alternatively, you can try to use some of the graphics third-party drivers that are written to provide some of the omitted features of the original notebook drivers. Note that if you do that there is no guarantee that they won't cause your overheating graphics chip, even if I used the ATI Omega drivers for some time now without any problems. You can get them: -.

  http://www.OmegaDrivers.NET/

  Kind regards

• HP Pavilion HPE: PC does not start at the top with a new graphics card installed

  I improved my diet to 600w and my new graphics card is a asus gtx strix 960

  My older gpu was a Geforce GT530.

  I've updated, drivers and BIOS of this HP Forum... and then I turned off my pc, took out the 530 and replaced by the 960. I start up the PC and it's me stuck on this screen. This photo is of online, that's exactly what mine looks like well. When I press "ESC to start menu", the screen goes black. the GPU and all good works. my version is v7.16

  

  only reason why I bought it was to play The Witcher 3...

  any help?

  calviiin wrote:
  

  Hmm. Looks like I won't get that. It's just another card that I purchase and its more expensive than the 960 gtx that I just bought.

  Thanks for the help.

  Don't, don't. It will be brick. They are also 2 completely different mobos. One choice is to buy a new motherboard or a new pc.

• Computer does not start after installing a new graphics card

  I am owner of a HP Pavilion H8-1020 with a processor intel i7 - 2600 s Windows 7 and am trying to upgrade my Radeon hd 6570 to a Gigabyte AMD Radeon R9 280 OC. I improved my diet for a Corsair CX750 to meet the requirements of power and installed with number. After the installation of the new card, which as far as I can tell is well seated in the pci slot and correctly connected to the PSU, my computer does not start.

  System powers on, all fans of begin to run including the fans on the new graphics card, but it does not begin the boot process, no entry is received at my monitors, no light on the keyboard, my OS starts loading, I can turn off the system without the delay that will flow normally. Then I reinstalled my old graphics card and the computer started as usual.

  Now, assuming that the card is not DOA, which unfourtunatly I have no way to verify, and I'd like to see if it could be another problem before going through the process of restitution. I did some reading on the internet, which helped, but did not help for a technological neophyte like me.  Now, I know a few things that could cause this problem but lack the necessary skills to determine what question is making me. What I've read, these could be possible questions:

  1: my new graphics card is not compatible with my motherboard. It's something I know now that I should have checked before buying and something I should theoretically be able to do it now, but I am at a loss on how to do it. My card is compatible with my motherboard?

  2 could be a BIOS problem. I updated my bios driver with the version provided by the HP site. I am running FRIEND 7.16 05/10/2011.  And from what I've read it might have something to do with my bios to UEFI mode and I would need to go to a legacy mode so he can recognize a new device, is it true? I am extremely wary of messing with my BIOS settings for fear of bricking my system. How can I check my current BIOS settings are and what I should change and how would approach I change them? Will one of these changes affect my system if they are not what is not causing the problem?

  In addition to these issues, anyone know any other matter which may be the cause of the problem that I should look for? Thanks for any help.

  Hello @Eric_Z,

  I can see why you are having problems with your new graphics card, and to get to the fast response that your motherboard is not compatible with the new graphics card that you have purchased. And here's why.

  Your motherboard according to the page HP Pavilion HPE h8-1020 Desktop PC product specifications is the Carmel motherboard, which has the following expansion slots:

  • A PCI Express x 16
  • Three PCI Express x 1 connectors
  • A PCI Express Mini Card x 1

  As there is no version indicated for your PCI Express x 16 it slot means that it is version 1.

  Now, your previous graphics card was a PCI Express 2.1 x 16, which means that it was version 2 and compatible with your PCI Express x 16 slot on your motherboard. However, the new card is PCI Express 3.0 and will not work in your motherboard due to a compatibility break. While the technology is supposed to be compatible there are many cases where it is not, and I'm afraid that you meet one of these cases.

  I am offering an overclock.net article entitled: the final answer to the controversial compatibility of PCIe x 16 version. where your situation has been tested and examined.

  I hope this helps. Have a great day and thank you for display on the HP Forums!

• Games - Assassin Creed (original) - do I need a new graphics card?

  Information:
  I just bought the original Assassin's Creed game for my new computor (2 months).
  However, the videos feature a shift of the audio-video and the gameplay is very slow.
  After verification of the automatic system of the game, my computor has at least the minimum system requirements to play the game.
  I already put it to the minimum performance parameters in the Options menu, it helped a lot.

  The Question: Do I have a new graphics card or more RAM or both?

  This isn't a bad internal card, but overall, there are better dedicated graphics cards. In addition, some games simply behave better with a dedicated graphics card and receive more support because the players tend to have dedicated ATI and NVidia graphics cards. If you continue to play the latest generation or even current generation games on your computer, I would seriously consider getting a good graphics card...

  In addition, the minimum requirements are just that, minimum. He does not play smoothly at all. Just that it's at least somewhat playable.