Get a signal on a XPS 17 L701X SPDIF

Similar Questions

• Getting a signal, the photo and the audi on the Media Center once I moved house

  I had media center in 5 years on this computer and it worked fine all the time. When I moved to the University, I tried to set up the TV and I am unable to get a signal, an image, or any audio device, despite having paid my TV licence. I don't even have the ability to tune the signal! Can I get some advice on how to restart the program, so I can start to catch up on Hollyoaks:?

  Make sure you have a tv tuner, Decoder driver update etc.

  If necessary to uninstall and reinstall.

  S.Sengupta Media Center MVP

• Media Center has stopped to get tv signal

  Original title: units media center problem

  using vista and media center has stopped to get tv signal. I checked the Internet is good, but the Player cannot find a server

  Discussions were merged.

  Deleted duplicate.

  Hello

  See if that helps you.

  Do a system restore to before that the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  See you soon.

• Installed new graphics of cards and getting no signal.

  Hello and thanks.  I just bought a new HP envy H8-1549 today and wanted to update the graphics card.  I have a new Zotac Geforce GTX 650 Ti and when I install it I get no signal on my monitor.   I also tried my old PNY GTS 250 and had the same problem.  Any help would be greatly appreciated.

  Hello

  Just try to remove the keys from secure boot and see if that solves your problem.

  Let me know the results.

  Thank you

• XPS 17 L701X audio controls control panel no driver found when they are affected

  When you tapoterez control audio control panel on the Control Strip, I get the message: "Please install the audio driver before using this button."  This button is supposed to launch the control panel Audio from Dell.  I don't know which driver is missing and would appreciate any help on how to install it.

  It is possible that your laptop has a generic HD audio driver Windows installed. This pilot will allow you to have audio but takes does not support all the audio features. That is the case, then install the driver audio Realtek HD to your laptop in the Audio category on the XPS L701X download page.

• Can no longer print anything a Web site when you use FireFox. Have updated to FF, but not other programs added or changed. Get a message "save under *.xps file."

  When I try to print, I get a message to save the file as *.xps file, but Mozilla unresponsive when I try it. Can always print from other browsers.

  Hello
  My name is Luke and I would be happy to help you with this problem. You get this is because your computer's default printer is defined in the Microsoft XPS Document Writer. If you go the printer settings on your computer and set your printer favorite by default a this problem will be solved. If there are any other questions feel free to answer me.
  Thank you!
  Luke

• Call to phone home iphone only gets busy signal

  Phone call home (fixed) to the 6s iphone Gets a busy signal. I don't have any blocked users. How can I fix this?

  Make one

  Force reboot

  http://support.Apple.com/en-us/HT201559

• Try to get a signal input of 60 Hz on SDP92SKY portable DVD player

  Hi, I hope someone here can help a lot. I have a 9 '' portable DVD SDP92SKY player and was hoping to use it to play my xbox 360 (I know, it's a small screen but I spend long periods away from home). The Xbox360 has the exit optionpour 50 Hz PAL and the VA to taken on the SDP92SKY works well, but most games will not play if this setting is selected. When I put the 360 at 60 Hz the SDP92SKY displays out of sync and I get long periods of black screens.

  I think there must be a way to get the screen to accept the signal 60 Hz in a way that I can use. Otherwise, this was an unnecessary purchase.

  > I think there must be a way to get the screen to accept the signal 60 Hz in a way that I can use. Otherwise, this was an unnecessary purchase.

  Hey buddy you bought a PORTABLE DVD player and this device is designed for watching DVDs on the road, on the beach or at other places and this device is not designed to play xBox games.
  Do you agree with me?

• Why can't get a signal tv via the media library when I can get a TV signal perfect through my TV?

  Channel 7 works at the present time through media library, but none of the other channels are. All I get is that the channel may be off the air or I need to reconnect to the antenna... When I Flip on the tv, all channels are fine.

  What the tv tuner card do you have?

  Update the tv tuner card driver and the graphics driver on the manufacturers Web sites. Tv signal reconfigures once done.

• How can I get digital signals (interface UART) with a microcontroller with NI USB-6008?

  I have acauired a few analog signals by A/D (3 channels). I put each scanned data on 3 digital output with a microcontroller. I want to see if it is possible to import these digital outputs 3 to a PC via a USB-6008? It's like the connection of the output to the digital input of the USB-6008 and import the 3 channels simultaneously to LabView? Do I need to use some other hardware like USB-8451 and connect the clock of the MCU to USB-8451?

  Saraydin,

  The digital I/o on the USB-6008 is a software program only, so unless your signals are rather slow, it probably will not work for you.  In general, the procedure would be to connect each signal to one of the digital lines on the map and then set up a digital entry into LabVIEW task to read the three channels.  If you use a device that has clocked by the digital i/o hardware, you then your input clock signal and use it as the sample for the task clock.  Here is a list of USB devices supporting DIO clocked by the hardware.  Also, there is an example that comes with LabVIEW, which shows how to do this.  You can get to it in LabVIEW by going to help > find examples.  When the example Finder window opens, navigate to hardware input and output > DAQmx > digital measures > Cont read dig Chan-Ext Clk.vi.

  The 8451 is specifically for I2C and SPI, and would be great if you try to make one of these protocols, but otherwise I would recommend the devices in the list I linked above.

  -Christina

• Trying to connect my laptop to an HDTV using an HDMI cable. Error I get is "signal".

  I use window Vista on my laptop. I'm trying to connect my laptop to my HDTV. I connected the two with a HDMI cable. The error I get on the TV screen is 'signal '. Is there some settings that need to be changed?

  All imput would be appreciated.

  Kite_99

  http://www.GeekWithLaptop.com/how-to-connect-laptop-to-TV

  http://www.online-tech-tips.com/computer-tips/how-to-connect-your-laptoppccomputer-to-your-TV/

  http://www.ehow.com/how_2377831_use-TV-monitor-laptop.html

  Read the info on the links above.

  See if that solves the problem.

  See you soon.

  Mick Murphy - Microsoft partner

• I get "no signal" after installing ie10

  I'm running Windows 7 x 64 with an ATI Radeon 5450 graphics card.

  White screen keeps going and displays the message "NO SIGNAL".  This happens after about 10 seconds and everything first two times I right-click after 'stirring' the mouse to "wake up" the display.

  The only change to my PC has been the installation of Internet Explorer 10.  All my drivers are up to date - I use the driver manager.

  Can help you please, it gets very annoying trying to use my PC in this State.

  Cheers, Dave.

  Hello

  I removed ie10 and pc now works normally.  I know that this does not provide much information, but it solved my immediate problem.

  I do not have a brand pc, I could provide you with a list of parties that could help you?

  See you soon.

• How can I make Windows Media Center play 21-2 (CBS)? He gets full signal on the search, but does not play.

  The station sister 21 - 1 plays very well. He asks to "frequency" add channel, however, I can only assume that the frequency of 2 numbers is the same 21 found already. Now what? Microsoft sent to HP, which has no support for WMC questions... by their staff in India.

  It's Windows 7, Windows Media Center, the TV Tuner Hauppauge USB Q 950 running.

  I am in Dallas, Texas. The station reads like T2D KTXA and KTXA DT 21-1 to 21-2... which is what WMC pulls upwards with you run the installer for my zip code.

  However, 21-2 is in the CBS reality, KTVT, 11.

  There is some confusion in my mind, as to what the frequency should be, having once been 19 and then received 11 temporarily, etc..

  I tried to get 21, 19 and 11 as the frequency, but WMC will play whatever it is facing 19 or 11 and will play again only 21-1 when I get 21 as the frequency for 21-2 (when I try to add it).

  I don't know what the reason for this problem, but I know there are across the country, in other markets, with WMC did not play all of the signals that it recognizes, even when they are large network signals OTA.

  I hope anyone in the DFW area, has experienced this problem and know the exact fix so I can view the CBS programming, for which I seem to have perfect signal, but can not get of WMC to play.

  Thank you!
  ~ Tex

  I checked with a contact at Microsoft, and they suggested to try another
  tuner. (If it were me, I'd buy one from a vendor with a massive return of rock
  policy).  The list of compatible tuners is
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/Browse.aspx?type=hardware&category=TV%20Devices&subcategory=TV%20Tuners&compat=certified
   
  I don't know if this will solve the problem, but should continue, IMO.
   
   
  Barb
   
  MVP - Windows/entertainment and connected home
   
  http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   
   

• My 2nd screen on my extended desktop is no more get a signal. This is unrelated to cables or a monitor, tried to update drivers.

  I have windows 8.1.  My Office long has worked well up to 4 days ago.  Now the second monitor does not receive a signal, it's dark.  I tried different cables and another monitor with no luck.  I've updated my graphics Intel HD display card drivers.  I ran the test troubleshooting as well.

  This problem actually happened to me about 6 months ago.  I read online that you must log out and log in to windows as a guest and for some reason any that worked.  This time, nothing works.

  Hello Adam,.

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  1. you made any hardware or software changes on your computer before the show?
  2. What is the brand and model of your computer?

  I appreciate your efforts to resolve the issue.

  This problem can occur either because of corrupt device drivers or incorrect device settings.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Please use the suggestions provided in this Microsoft support article and check.
  Reference:
  Get the best display on your monitor
  http://Windows.Microsoft.com/en-us/Windows-8/get-best-display-monitor

  Note: Please see the section "setting the parameters for multiple monitors" section above.

  If this does not help, use method 2.

  Method 2:
  Use the suggestions in this article and check the issue.
  Reference:
  What happens if a wired device is not installed correctly?
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  See also:
  Plug a second monitor or projector
  http://Windows.Microsoft.com/en-us/Windows-8/how-connect-multiple-monitors

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• How put the 2nd HDD/SSD in XPS 17 L701X-... There is no support!

  I would like to replace my HDD for an SSD, but I want to continue to use the original HARD disk. The XPS 17 has two positions of HARD drive, but only one of them has the bracket. Where can I get a second tranche? None is listed in the list of items on the Web site.

  I'm fine with another type of support that adapts, but so far I paint a white when searching for it.

  >

  This is the part you are looking for.