I get "no signal" after installing ie10

Similar Questions

• Satellite A30 - impossible to get a sound after installing XP

  Am not able to get sound after installing XP. Drivers from the Toshiba web site do not help. Does anyone have an idea on this issue. Thank you

  Hello

  It's old model of laptop, and all pilots must work. I'm sure you make a mistake. On this old notebook, you must install Windows XP Home SP1 edition and after doing this install all patches software, driver chipset, driver and driver sound to the less rated. The sound should work fine.

  If you have laptop model please download the drivers from the EMEA support page http://eu.computers.toshiba-europe.com

  Good bye

• HP Pavilion dv7-6141eo with BSOD after installing IE10 or IE11

  Since a few months I had problem with my computer with BSOD when trying to install IE10 or 11. It is not a problem when you use IE9 but it happened to old for some pages, and I really need to use a more recent browser.

  The text displayed in the BSOD is:

  igdpm64.sys

  PAGE_FAULT_IN_NONPAGED_AREA

  As I understand it, it's a problem with HP laptops with two card...

  I reinstalled the computer twice (reset), but as soon as I install IE 10 or 11 the BSOD comes back. I removed Norton Antivirus once to check if BSOF problem is a problem with this program, but she came back after a while when you use IE10. The reason why I removed NIS was that I myself BSOF whenever I run the update from NIS...

  I know the problem with the "KB267083" update... so don't tell me to remove this...

  Please help me with this problem.

  Thank you

  By

  PSBPSB

  Please uninstall Windows Update KB2670838

  http://support.Microsoft.com/kb/2670838

  Reset

  Uinistall AMD driver

  Reset

  Install the new

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55092.exe

  To disable hardware acceleration, follow these steps:

  1. Click Start, and then click Internet Explorer.
  2. Click on the Tools icon in the upper right corner, then Internet Options.
  3. Click the Advanced tab and under Accelerated graphics, select the checkbox made software use instead of GPU rendering .

  reset

• Webcam and DVD player get not recognized after installing an update

  Original title: Why webcam stoped working after vista update? __
  Cam web and CD/DVD of my hp 9623 cl stoped working after the update to Vista. The two are unavailable in Device Manager too.

  need help to restore it. Thank you

  Hello

  1. may I know what update has been installed?
  2. did you restart your computer after installing the update?

  Run Fixit diagnostic tool from the link below.

  Hardware devices do not work or are not detected in Windows:
  http://support.Microsoft.com/GP/hardware_device_problems

  Kind regards
  Afzal Taher-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• No Signal after installing new graphics card

  Hello and thank you in advance for your help!

  We have a 2 years old HP p6540y.  It has an ATI video card integrated. When we recently turned on, we got a message "no signal" on the monitor and then he'd go to sleep.  We tried many things to fix... listed below, in order and are always the same message.  Please advise!

  (1) No Signal: DVI, VGA, HDMI.  So we unplugged and rebooted, no change.

  (2) checked monitor and DVI & VGA cables with another computer: they all work.

  (3) installed new graphics card: NVIDIA GEForce GT 610.  Still got same message "no signal".

  (4) we plugged/unplugged all the other cards/cords / no matter what we could and cleaned.  Then, finally, the monitor turned on! But not for long...

  (5) after you restart the computer after installation of the graphics card driver, we got the 'no signal' message again.  We released once more, other cards/sheets and again once the monitor and the computer came to life.

  (6) we uninstalled the ATI integrated graphics card.  When we go to display, Advanced Options, he mentions our new NVIDIA as graphic/video card.

  (7) we turned computer off during the night and this morning when we have lit, we once agin got the message "no signal".  We have unplugged/plugged computer several times.  Also tried the trick with cards/plugs by pulling and we have nothing.  No Signal.  After doing this several times (about 10), he is finally working again.

  (8) we changed the sleep settings to: screen saver = never; Standby mode = never.

  (9) we restarted again to get once more no signal message.

  So... what should we do?

  Thank you very much!

  Triusa, welcome to the forum.

  I think that your problem is caused by the power supply unit (PSU).  Here's a guide to help you solve the problem:

  http://support.HP.com/us-en/document/bph06788

  Also, the existing PSU is 250W.  The 610 GT requires a minimum of 300W.

  If your problem is solved, please click "accept as a Solution.

• No input signal after installing new hard drive

  SUP guys, im need help, my hard drive on my computer has stopped working, I'd get an important flasher hits and it looks like it please insert a disk and when I did a diagnosis, I had hard drive errors I went and bought a new one.

  In order to take the old one out I had to remove the cables from the hard drive, the big white thing that plugs into the motherboard, the processor fan and cable.

  I put in new hard drive, put everything back as it should and when I boot it all im getting are no signal input on my screen, I have tried on 3 different screens and got the same thing.

  Here are some pictures of the inside of my computer:

  

  

  

  If you notice the VGA thing on the 2nd picture, should no more added to it? I mean in addition to plug the cable from the monitor, I have the impression that there should be something added to the back of it, I just noticed now, the computer and the screen worked perfectly before.

  It's a HP model number is a6655f, it came with vista, but after putting in the new HD, I intend to put windows 7, I have a copy of it.

  I guess with the new hard drive and I am I was right assuming that you have already installed windows 7

  Sounds like you need drivers for the drive, and sounds like a simple problem, download drivers and install I believe that when you install windows 7, it offers you the possibility of drivers installed.

  Oh and you could try to change SATA to IDE in the BIOS and see if that helps

• My iPod nano 2nd generation gets disk errors after installing iTunes?

  I use my iPod nano 2nd generation for... Wow little almost 10 years now and of course is not as sensitive, a little laggy sometimes, battery life isn't as good but still never had real problems with it that can be repaired by a reset. Well not until now and I have not really money to spend to get a new, in particular the fact that practically it still works fine on his own, just that I can not add or remove pieces of her more.

  The problem

  It seems that the computer has trouble reading the device. Whenever I plug my iPod nano 2nd generation USB in my laptop (Windows 10), which has some sort of interaction with it freezes. For the moment I plug in, programs such as Winamp, iTunes, File Explorer (if I click my computer-> try to right click on the drive, that says all F: drive instead of the usual name recognized as "My iPod."), the Device Manager when I try to turn Apple iPod USB Driver and the small icon in the system tray when you try to eject the drop-down list no longer appears, all these programs themselves just freeze and unresponsive until I unplug the device. In Event Viewer, the moment where I plug it, it gets spammed by looping errors to:

  Error: The device, \Device\Harddisk1\DR21, has a bad block.

  ATTENTION: An error was detected on device \Device\Harddisk1\DR21 during a paging operation.

  So, basically, it seems that the computer is blocked just not try to read and recognize the device, which means that I can't really do anything with it. The iPod itself seems to work fine, I can hear songs, recharge the battery and other things, earlier I can't add or remove pieces of her.

  Stuff leading up to it

  A year or two before, I used to manage the ipod via itunes (a relatively old version of time too I guess since I almost never update) until I formatted my laptop some time ago and never bored computer reinstall itunes. Since then, I really didn't need to change anything to my iPod and just use Winamp (my default music player) to the add/remove songs when I needed to. Today, I decided to install iTunes because there are some things that winamp cannot do as add embedded lyrics and also winamp blurs the sorted list of the song. Since then, after you have installed the new iTunes, start freezing and program I get the problems described above. There might be a chance that iTunes was not the real culprit and the disc was already beginning to get corrupted or something somehow, but I can't think of anything that's happened before this problem started.

  I tried many things

  • Uninstalled iTunes and all the other stuff related to the installation as pie, Apple Mobile Device Support... .etc
  • Reinstall the device driver USB Apple iPod. When I turn it off (Plug in iPod-> iPod poster 'do not disconnect'-->--> Device Manager driver right click-> disable-> Device Manager freezes up-> unplug ipod-> Device Manager-> thaws plug ipod in) ipod becomes simply the State of charge. Steps to reinstall is the same (need to plug and unplug).
  • Reset iPod in now the Center button + menu button.
  • Will then resetting operation rewind + Centre button iPod diagnostic mode. It is not a test disc hard because I guess nano doesn't have a disc hard just flash ram. Anyway, when I select SDRAM QScan he only says: "SDRAM OK." NAND_SPEC gives "NandLBA = 1982464". Flash gives Checksum "Checksum is 0x26AF".
  • Wanted to try as described here to check for disk errors, but cannot because the computer cannot correctly recognize and explore freezes if I right click. I tried using 'chkdsk f:' in the command prompt, but that seems to hang as well.
  • Switches mode disc reset ipod then now Center + play button. Then connect the laptop... etc, same problem.

  It's a pretty old device, so it seems that support because it is very rare. I didn't install iTunes could screw up the device that it is intended to support and do anything as permanent as this one.

  You must exclude a faulty USB, cable anchorage, try another, or using your power with another Apple device cable, to confirm that it works correctly.

  Otherwise, your troubleshooting seems complete.  If that's what you've done for disc Mode

  How to put your iPod in disc - Apple Support mode

  and connection to your computer causes this issue General 'freeze' with multiple processes, the iPod has possibly a hardware problem.  Flash storage eventually.  Or it can be a problem on the logic board of the iPod.

  I suggest try to reformat the iPod using Windows, as if it were a USB flash drive.  But you can only do if the system hangs when you connect iPod.

  NOTE: If you find a way to reformat iPod using Windows, use FAT32 as the disc format.  If there is an option to do a quick format, do a full format instead.  Once the process is complete, the iPod is totally blank.  You do restore using iTunes (if you are prompted or not), to the embedded iPod software.

• Can't get into bios after installed processor.

  Hello
  I have recently upgraded the CPU in my p6-2370ea to an i5 - 3570 k. The processor was faulty and I tried in several systems. After he go out and by replacing the i3 came with the pc, I get 6 beeps bios long before the pc starts again. After doing a lot of research I found that I need to disable secure boot and enable legacy mode (I removed and replaced the graphics added a 7750). However, I can get in the boot options, but whenever I go UEFI settings and click on "restart", I get 6 bios beeps and my screen does not light. In short, I can't access the Bios. I need to remove the graphics card and to do so with that discreet? Or is it possible to go directly to the UEFI boot rather then requiring a reboot of the system?
  Thank you
  Whyamiworking.

  Whyamiworking, welcome to the forum.

  I suggest you return the computer to its original configuration.  Then you should be able to enter the BIOS.  Be careful when you change the settings.

  If your problem is solved, please click "accept as a Solution.

• Loss of wireless signal after installing Windows Vista

  original title: sinal wireless

  I have an ibm lenovo t61 thinkpad. I just that had a windows vista back on until I did the wireless was working fine. now I got it back on the switch is, but the computer but the light on my computer will not on and I have wireless. It does not show anywere that I have the signal. can u help me

  Have you installed Windows 7 device drivers for your make and model. If this is not the case, then go to the support web site factory and download Windows 7 drivers to a folder on your PC and then first install the drivers for the card mother/chipset, followed by USB, SATA, LAN, Audio and all other pilots.

  External wireless devices usually come with their own software and the driver which you should be able to download from the web site of the manufacture of wirelsss.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Get a BSOD after installing an SSD

  I was able to successfully install an SSD on my XPS 8100. But when I connect a HARD drive (which has all my data in it), my computer crashes. If I go back to my old HDD to begin with my data HARD drive connected, everything works fine. Any ideas that I could do to solve the problem?

  Hi Bobindsamuel,

  I also have a XPS 8100 with a new SSD and my old HDD as a data reader. My system does not exhibit this behavior. Then explain what you mean by crashing. You get any blue screen error?

• Get his problem after installing windows update on May 18, 2016

  Original title: updated 18/06/2016

  Has anyone else been having sound problems with the new batch of updates? I tried to download the drivers, but that didn't work and now I had to restore my system from the 18th daily. Any ideas on how to identify the update is the cause or what driver I may have missed? My computer is a Dell Latitude E5420, running 64-bit Windows 7 Prof. Any other information needed let me know. Thank you!

  Hello

  According to the description, I understand that you are facing the problem in your computer after Windows installation updated May 18, 2016.

  Yes, you can view the installed update so that you can identify the updates that are installed in May 18, 2016.

  Please follow the steps to see updates history in Windows 7:

  1. Click the Start button.

  2. Then select Control Panel > programs.

  3. And then, under programs and features.

  4. Select view installed updates.

  View update installed please check that the update installed in May 18, 2016 and uninstall the update one & check if the sound is working well and find the culprit, update.

  Please follow the methods described below to check if it helps:

  Method 1: perform a Clean boot and install Windows Update.

  If its a major update, I recommend you put the computer in a clean boot state and install it again in order to minimize interference that could cause this noise problem.

  Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows

  Note: see 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.

  Method 2: uninstall and reinstall the Sound Driver.

  1. Press Windows + X key.
  2. Type devmgmt.msc (to open Device Manager)
  3. Find and select the audio driver.
  4. Right click on the driver.
  5. Uninstall the audio driver.

  Windows automatically installs the generic driver, otherwise I recommend you download & install audio driver on the website of the manufacturer to check if it helps.

  Hope this information is useful, if the problem persists please write us back with the quick information so that we can help you further.

• TV connected via the VGA input to HDMI don't get no signal after preparing the Windows message, works fine in safe mode

  Original title: PC to tv connection / VGA to HDMI

  Hello
  I hope someone out there can help. I recently bought a new samsung TV after that my old one failed. My new TV doesn't have a RGB port to connect a VGA cable to so I can use my PC as my old one done, it has HDMI and my PC only output VGA. I bought a VGA Converter HDMI to maplin and when I start my PC the image appears on my TV because it goes through its startup upward. It displays windows prepares, but then the Windows point would open normally, the signal on my TV dies and it does is display the message no signal on the screen. If I start thr PC in safe mode, windows starts very well and the signal does not go down. I use windows 7. Someone knows how to fix?
  Thank you

  It is possible that your computer is trying to send a resolution & frequency to which the TV cannot manage.  I suspect that this is because the image is displayed when starting, but then disappears when Windows takes control - until Windows takes over, the resolution sent will be below.

  You should consult the manual of the TV to its specifications.  Mine, for example, just a a simple table of resolutions & combinations of vertical frequency it can handle.  Then look at the Control Panel, display, change display settings to see what your computer can produce and choose one that fits these two machines.  If the best resolution display settings don't work then go to the next best resolution [or in the setting of 640 x 480 to see which works best].

  Once configured, Windows will display the setting chosen at the television screen every time so you will not have to keep setting up for each session.

  Each time that you connect the TV you can use the Windows key + P key combination to toggle the display.

  I don't know if you want the TV an extended desktop or a single view.  You might find, as I did, that the TV can use a higher resolution output if it is the only view.  I suspect that this is a result of capacity of the computer's display adapter because it has less work to do if there is only one required both display.

  Once you put in place, you may find that control panel display settings, display, change, advanced has useful additional parameters, but you'd probably need to have a good guide to help with your graphics card make any sense of the options available.

  If that is not enough then I suggest that you try to find an online forum for your TV, hoping that someone has done what you are trying to do.

  Good luck

• get updates same after installing just them. installed the second time. and update then said moments the same updates are availeble to install.

  Update Manager downloads updates, I already installed

  Hello

  I suggest you try the steps from the following link:

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update http://support.microsoft.com/kb/910339

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows Vista

• BlackBerry Smartphones Re get a signal after being away for a long period of time!

  Hi all

  New to the forum, so I would like to join the thinking and see if someone can help with a small problem I have.

  I work in the middle of nowhere quite often, where the telephone signal is very low or non-existent. (I'm with Orange BTW).

  The problem seems to be that when I was out of range of the signal for a while, (the shortest period up to present about 30 minutes), and I'll be back in range, my BB doesn't automatically drop the signal.

  The only way I know to regain the signal is off the phone (red button does not restart the battery!) and again on.

  The phone then searches the signal and everything returns to normal... that is until I left out of reach!

  Y at - it a shortcut to re capture the mobile signal rather than extinguished/turned on?

  Thanks in advance

  M.

  Usually, you can simply go to manage connections > Mobile network and turn off, pause and turn back on your mobile connection to find your network.

• Internet Explorer and Firefox, both crash after installing update KB2670838

  After installing Win7 x 64 platform update KB2670838 (as recommended) no browser would go, V19.0 Firefox and Internet Explorer V9.0.13 (32 and 64 bit) would all the crash initially upwards.

  Other programs, I tried that internet access would go directly without problem.

  Be able run any internet browser, I had to uninstall KB2670838.

  What is the problem with browsers, internet and KB2670838?

  I solved the problem of Firefox after installing IE10 by opening Firefox in Mode safe mode and disabling hardware acceleration (how to in my previous post), have not had any problems with Firefox because I have disabled hardware acceleration.