Error "Cannot display Web page" when the wireless internet access.

Similar Questions

• Cannot display Web page: despite the excellent internet connection

  Recently put in place of the blank media broadband, everything is connected and all the lights are on

  Laptop recognizes the wireless network, request password and connects successfully with full signal but when I go to browse the internet, an error message appears saying: I can't access the internet

  would appreciate any advice, thanks

  Hi elizabethhelen,

  1. What version of Windows you are using?
  2. What web browser do you use?
  3. You have security software installed on the computer?

  Refer to the Microsoft article if you are using Internet explorer as web browser try the steps mentioned.

  You receive an error message in Internet Explorer: "Internet Explorer cannot display the webpage".

  http://support.Microsoft.com/kb/956196

  If the previous step fails, run the Network Diagnostics tool and check.

  The problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Wireless network card: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Laptop does not connect to the internet. error cannot display Web page

  Original title: laptop does not connect to the internet. How can I fix it?

  I'm trying to get my laptop to connect to internet, but it will not. It keeps telling me that it cannot display the Web page. The wireless connection is the link and he sees the laptop, but it's like he goes. How can I fix it? Help!

  Hello

  1. Have you tried using anythird party web browser to connect to Internet?
  2. You use Internet Explorer to surf the Internet?

  If you receive error message cannot display Web page in Internet Explorer, then you can check the link below to fix the problem.

  "Internet Explorer cannot display the webpage" error when you view a Web site in Internet Explorer

  http://support.Microsoft.com/kb/956196

  Note:

  Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

• Error: "cannot display Web page".

  Original title: my computor won t connect to the internet

  I can t connect to the internet it say cannot display the web page

  Hi maureenbuckley,
   
  -What is the browser you are using?
  -If it is Internet Explorer you are using, what version of IE are you using?
   
  If you use Internet Explorer, follow the steps listed in the article given below to resolve the problem:
  "Internet Explorer cannot display the webpage" error when you view a Web site in Internet Explorer

• Error code: 0 x 80248011 - cannot display web page Windows Update

  When you try to use microsoft update after a few seconds of analysis of the updates, the update stops - can or view web page - and display an error message [error number: 0 x 80248011]

  Recommended action is to remove temporary internet files & restart internet explore.

  DONE, (3 times), but still the same result, a few seconds in the analysis stops update - cannot display web page [error number: 0 x 80248011]

  What's wrong???

  Thank you

  gfa5775

  GFA,

  Number of all other errors

  First of all to clear up your Temp File/Cache, restart the computer and try again. Better and easier to use - CCleaner.

  Reboot and reset the Windows Update components with the aggressive part of the correction

  How to reset the Windows Update components?  http://support.Microsoft.com/kb/971058

  Reset

  always disclose your OS versions and IE when you want to help.

  http://support.Microsoft.com/kb/555375

  What updates you trying to install?

  Error code 0 x 80248011 may occur when there is a problem with the database that stores Windows Update or Microsoft Update information on your computer.

  May occur due to corruption in the Datatore folder or problems in the Internet cache

  This will give you a starting point for your troubleshooting anyway.

• BlackBerry Smartphones can visit the web page when the radio is off

  I installed NetworkAcc on my BlackBerry Storm 9530 with OS c. 5
  and now I can't use my web browser. I get the error message:
  "Cannot see the web page when the radio is off, please turn radio".
  on and try again. »

  I don't have any idea how to enable or disable the radio. What is the problem and
  How should I do?

  I'm not familiar with "NetworkAcc" but to turn on your wireless radio, you need to go to 'Manage connections' and check the Mobile network (and also wifi or bluetooth if you want to use wifi or bluetooth.)

• Program cannot display web page on start up - replacements all & freeze safe mode

  Hi, on my pc startup (Vista) after the initial office, he's going on a blank white page with information i. Message is "the program cannot display Web page". If I try to start the task manager that flashes briefly upward, then the white screen resumes. If I try again, I get a black screen. While the screen is in place I can't do anything else or run programs at startup upward until this screen.

  If I boot in safe mode, the top of desktop and icons here, but I can't do anything else - even closed. I have to press the power button until the PC is emerging.

  I don't know how to do BACK guests or find how to work around this problem. I tried several searches but all the answers are in line to remove this or that or a scanner. I don't have access to all programs do. Even the answers on this site so far await you to be able to run other programs of some sort. I'll have to write this on PC of the wife. Any help / suggestions gratefully received.

  Thank you, Nick

  You can use Windows Defender in offline mode, use a PC secure and download and use:

  http://Windows.Microsoft.com/en-us/Windows/what-is-Windows-Defender-offline

  And then use removable media or a CD/DVD and create the startup and startup disk in your infected PC and then run a full system scan. You have no need to start your system in this way.

• Get an error loading a Web page in the Panel with require

  Hello

  I'm trying to load a remote Web page in the control panel. I followed the example here: samples/Trello to master · Adobe-CEP/Samples · GitHub

  I also added the lines here to make sure that versions require node / module do not interfere with my requireJS I loading: CEP 6 HTML Extension Cookbook for 2015 CC · Adobe-CEP/CEP-resources Wiki · GitHub

  However, this is the error that I see, that require resources that he always uses a function node according to me: requireError.js

  In fact, I realized what I was doing wrong, what was obvious after the fact. The problem is that if I reload the page, of course my redefine require it and functions of the module will be lost. I had to add the node require redefinitions on the page that was being loaded.

• Impossible to connect to the wireless network when the wireless Internet is filled to connect to the Local network

  I tried to fill the connection between my laptop Wi - Fi and an ethernet cable LAN via the connection to the Local network for my xbox 360. However, when the connections passed the wireless connection would show that it is disconnected and would not reconnect. When I tried to repeat the process sometimes the same thing happens sometimes it says that it is still connected.

  However, be that as it may, both times I could not load any page of the website from my laptop and xbox connect any.
  How can I create a network bridge and get the wireless internet to connect please?

  Any help to fix this would be appreciated,
  P

  This Microsoft Knowledge Base article might help: bridge may not work with a Non-Promiscuous Mode network card .

  If not, I recommend to delete the network bridge and enable sharing of Internet connection on the wireless network connection. Boulder computer Maven
  Most Microsoft Valuable Professional

• Wireless connected but cannot display Web page

  Hi, I have a HPG7094 laptop with Vista 64 bit installed.

  I tried for days to fix my problem. My wireless connection has stopped working. It says it is connected to my wireless - excellent - but when I try to open the internet I get the error IE cannot open the Web page. I deleted my network and tried to re-login only to get the same error. I did a clean install on my laptop and downloaded the drivers on the HP site, but it's always the same.

  In the lower RH it says 'Unidentified network' (and the name of my network) access: Local only. If I connect the ethernet cable, it works fine and if I connect my mobile dongle orange it works very well.

  I have other laptops and desktop computers and all these connect wirelessly without problem. I have tried to 'fix' the wireless connection and not to renew the period of INQUIRY, still no joy. I connected on the router from my office and changed the channel from "auto" to "6" and "11", but this has no effect.

  Someone at - it ideas, what could cause this problem, any help would be highly appreciated.

  Gail

  Hello

  After a couple of hours last night looking through this forum, I came across a post by Paul Tikkanen, January 21, with a link to another driver for the Atheros wireless. I downloaded and now my wireless works!

  Thank you for all your help and keep up the good work!

  Gail

• Cannot display web pages on explorer 8 without using the left/right scroll bar.

  I rebooted my system yesterday and now when I visit a web page on explore 8, I have to use the left/right scroll bar to view the entire page. Before I rebooted and am went full-screen page would correspond to the size. The graphic and type are larger, and I wouldn't change a thing.

  On the command bar, there is a marked entry Page.  Until it clicks.  (If you do not see this, right click on the toolbar of the tab and then click the command bar to add it to the other toolbars).  Now, go to Zoom and the size of the text and set each as required to get the page fit on the screen.  For me it works with the format as smaller text and 150% Zoom, but it may be different for you depending on the size of your screen and your graphics hardware.  If it's just a problem of zoom (and you don't need to adjust the size of the text), then there is a Zoom control on the right-hand side of the bottom bar State which also allows you to adjust the Zoom level on what meets your needs (and there are a little faster to join then the menu bar).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How install google when Internet explorer cannot display web pages. I uninstalled google chrome w / hopes to reinstall.

  I uninstalled google chrome and I wanted to reinstall, but I can't get Internet Explore a web page to do this.

  Hello

  Try to use Internet Explorer without modules (start - all programs-Accessories System Tools).

  No not that other possibilities...

  • http://support.Microsoft.com/kb/923737
  • Download the installer of Firefox on another PC from http://www.mozilla.org/en-US/firefox/new/ and save it on a usb key, then use it to install Firefox on your PC. Then use Firefox to install Chrome

  Tricky

• Satellite C660D-124 cannot display Web pages, but connected to the internet

  Hi all

  This is my first post and I hope someone can advise me.
  I have a Satellite C660D-124. running win 7.

  I have a netgear router on my pc and the laptop is connected to my home network.
  I'm hosting wifi using the mac address of the laptop to access control on the router.
  I turned it on and off the power, but nothing helped.

  When I click on the wifi down icon to the right it says that I'm connected to the network.
  When I select the network connection, it says excellent signal.

  When I open google I get a white screen saying loading tool bar, but it never loads.
  If I plug in an Ethernet cable, nothing happens.
  I run AVG Security, I tried to disable the firewall and nothing happened.

  So basicially my laptop says I'm connected but... I am not connected. !!

  all responses appreciated

  Donal

  Donal salvation

  If I understand you right you have the same problem using a LAN and WLAN connectivity. Is this good?

  If so, I think that there is a problem with your router. Reboot the router and check all the settings there.

  In the worst cases it set to the factory settings and basic stuff just for the Internet without playing with other settings there.

  Did you maybe test it connect your laptop to another router?

• Why Internet Explorer cannot display Web pages (dup responded so marked since can't delete because of a response)

  I am constantly see (but not always) Internet Explorer can not display the webpage when I open Internet Explorer, and he tries to go to my home page which is Facebook. Then I click on any site in my favorites and it goes straight to him. In fact, after I go to other sites, I just click on the button of my Facebook in my bookmarks bar and it will then open it right to the top! So there is nothing wrong with my internet connection and I know that there is nothing wrong with Facebook.

  Hello

  ·          Were there any changes made to the computer until the problem started?

  Step 1:

  You can remove Facebook from the Favorites bar and the delete browsing history and to add Facebook to your Favorites and check if that helps.

  To customize Favorites, follow the link below.

  http://Windows.Microsoft.com/en-us/Windows7/customize-your-Favorites-bar

  To delete the browsing history, follow the link:

  http://Windows.Microsoft.com/en-us/Windows/help/Internet-Explorer/slow-five-tips-to-boost-performance

  Step 2:

  You can run the fix in the given below link and check if this is useful to get rid of the error message.

  http://support.Microsoft.com/kb/956196

  Hope that information was useful

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Gettign a error "cannot display this page and your dns server can be unvaliable" while trying to access a chat site.

  * Original title: it just that chat site which gave me a HRT page cannot display so I click fix coinection problems and he gave me your dns server may be unvailiable

  This is a chat site called babblesex problems, said Sunday and its been 5 days because I can't access the website but I can access to other sites just babblesex site and it still gives me this page cannot be displayed and your dns server can be unvaliable

  This Web site indicates that babblesex is, in fact, down:

  http://www.DownForEveryoneOrJustMe.com

  http://www.DownForEveryoneOrJustMe.com/babblesex.com

  Don