Get data from transient attribute to another VO

Similar Questions

• Y510 unable to get data from the camera.

  Hello

  I have a Y510 with Windows Vista 32 bit, 3 GB RAM, only 5 weeks. I get this message when I try to use Veriface, "unable to get data from the camera. The camera may have been disconnected or busy. I reinstalled Vista of the State in which the laptop came, but it does not work. I also updated the bios and install other updates were available. I would appreciate any advice.

  Thank you

  Peter

  I wish it was as easy as press Fn + Esc, I looked through an another Y510 our office and managed to find a process that must be set to Auto, the process is KtmRm. This process cannot be disabled, handicapped, or on a time delay, it must be AUTOMATIC.

• Need some ideas on the copy of the data from one schema to another.

  Dear all,
  
  I would like to know the best method and possible by copying data from one schema to another. (I won't use EXP / IMP).
  Example:
  
  
  I have a scheme of production on which I have hundreds of tables. I copy the data of the TEST environment after comparing data, I should copy the data incrementally.
  Maybe this copy of data may occur once a month, or on request.
  
  I want to have this done by a procedure.
  I was thinking about the logic below, using a procedure I will compare the tables and the structures between the two schemas.
  Then I willl use the primary key in both tables column and compare the data first. If the data if it does not exist then I only inserts these records in the target.
  The above said logic could be as similar as the synchronization of data or records, but the table does not all columns to track records archived / copied from the source.
  Suggest me so if you can give me the best logic or solution.
  
  Thanks in advance...
  
  Concerning
  Suresh

  GSKumar wrote:
  Dear all,

  I would like to know the best method and possible by copying data from one schema to another. (I won't use EXP / IMP).
  Example:
  I have a scheme of production on which I have hundreds of tables. I copy the data of the TEST environment after comparing data, I should copy the data incrementally.
  Maybe this copy of data may occur once a month, or on request.

  I want to have this done by a procedure.
  I was thinking about the logic below, using a procedure I will compare the tables and the structures between the two schemas.
  Then I willl use the primary key in both tables column and compare the data first. If the data if it does not exist then I only inserts these records in the target.
  The above said logic could be as similar as the synchronization of data or records, but the table does not all columns to track records archived / copied from the source.
  Suggest me so if you can give me the best logic or solution.

  I don't know why you don't want to opt for EXP/IMP.
  As an alternative, if you have a link DB between Production and Test pattern (which I seriously doubt), you can use the MERGER to a copy of data from Production to Test Delta.
  a. INTRODUCE IN test_schema.table_name SELECT sequence_columns, column_list FROM (SELECT column_list FROM prod_schema.table_name LESS SELECT column_list from test_schema.table_name)
  Column_list must not contain columns that contain sequence values because they may differ and result in an incorrect result; Therefore, this is taken into account in the outer query rather than Inline mode.
  b. MERGE STATEMENT
  c. FALL of test_schema.table_name. CREATE test_schema.table_name as SELECT column_list from prod_schema.table_name; -A way very neat to copy all the data, provided you do not keep any changes to test the tables in the schema.

  However, you mentioned to find existing records based on the primary key; IMO, primary key is normally a sequence (may be alphanumeric) and its value on env Production and Test may defer or even can have different attributes, therefore, I find it incorrect to match only the primary keys. I would say to match the key attributes.

  If you want to follow the last update/insert for a record, you can add a column that puts the time of last modification. In this way, you can track the changes of a column. Another alternative would be to use a check to the table.

  Let us know your thoughts or concerns, so that help can be provided.

  I suggest that you read and follow {message identifier: = 9360002}.
  If you will be useful if you can provide all the information required in advance to help us provide you with a quick resolution.

• How to get data from excel

  Hello world

  How can I get data from excel inside my program? I'm using labview 8.2. I have tried to find the solution for this but seems that the solutions are not suitable. Can someone help me? Thank you.

  Hi jieah,

  Inside of the attachment nijams don't you see this?

  read_excel_values. LLB

• Get data from a member of the region partitioned customer

  Hello

  I have a partitioned area, this region is in all 3 members, is it possible to get data from this region but only from 1 member of the customer, if so how?

  What is your definition of the region on the server? The three members have given? You set redundant copies? In addition, if the optimizeForWrite() of the service method returns false, the function will run the smallest number of nodes.

  Follow these steps:

  The redundant copies of the value = 1

  Returns true for optimizeForWrite()

  Make sure that all members contain primary buckets

  Perform function like you do above

  Barry

• Best way to move data from one page to another within the app

  Hi all as I started to write that and was way to complicated to explain in full without a novel.

  Brief description. I use the query string that begins in the parent (from href in JSON) window must then be moved in the iframe url when moving to other pages to avoid security as a page and iframe is conflicting http and https. and are not accessible... It seems that there must be a better way.

  So my question is what is the best way in a platform open to move data from one page to another?

  You do it this way, it's in the menu.json, but when you work within the iframe and if your loading pages in applications using vairable relative URLS cross they come through.
  Discovered only this framework using the browser and you can se the construction and scope of all URLS used.

  The apps are sandboxed you cannot access aything in the parent frame, this is a feature of derliberate if something you can not do.

  As I said, you have a few methods to your own data storage space.

• Copy data from one schema to another. Reopen the Question

  Hello
  
  I had asked this question earlier to copy data from tables of one schema to another in the same database using the database link. In my previous post have mentioned below.
  

  Re: copy data from one schema to another.

  Now I am faced with the question for the remote copy of database
  
  I have created a DB connection between my local system and the remote database. with the chain of connection as shown below
  

  CREATE THE DATABASE PUBLIC LINK "MERU_DEV_LOCAL_DEV".
  CONNECT TO MERUDEV IDENTIFIED BY MERUDEV WITH THE HELP OF "MERUPROD";

  In the above script
  

  LOCAL DEVELOPMENT scheme IS
  REMOTE schema is MERUDEV

  I try to copy remote database to my local database tables using the script below.
  

  network_link DEVELOPMENT impdp = schema MERU_DEV_LOCAL_DEV = MERUDEV remap_schema = MERUDEV:DEVELOPMENT TABLE_EXISTS_ACTION = REPLACE

  But the copy of the table does not occur. What could be the problem? Please suggest me or do I need to modify the script
  
  Thank you
  Sudhir

  You can:
  -monitor the BONE with ps - ef
  -monitor data pump: jobs are dba_datapump_jobs and dba_datapump_sessions
  -monitor with logops: v$ session_longops

• Get data from a dBASE - .dbf.

  Hello everyone - Hello work Sunday: (.) I need to get data from legacy applications that run the dbase program. You'll need to auto data. If you have an idea, please tell me. Thanks to you, NIC.

  >

  Hello everyone - Hello work Sunday: (.)

  I do not work yet--it's sad that :)

  I need to get the data from the old application
  running the program dbase. You'll need to auto data. If you have an idea, please
  say to me.

  Have a look here http://asktom.oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:711825134415.

  It worked for me, with a bit of difficulty – mainly because of my own stupidity... If you have
  no problem, post back.

  HTH,

  Paul...

  Thanks to you, NIC.

• How can I get data from each associated XMLnode in movieclips separated when you click a line in the combobox

  How can I get data from each associated XMLnode in movieclips separated when you click a line in the combobox?

  A sample of XML is like this:

  <>planter

  < Lauvtre >

  < Botanisk_navn > Acer campestre < / Botanisk_navn >

  < Norsk_navn > Naverlonn < / Norsk_navn >

  Gronn < Farge > < / fan >

  H4 < Herdighet > < / Herdighet >

  < Hoyde > 10-15 m < / Hoyde >

  < / Lauvtre >

  I have a combobox where it shows the botanical name and the Norwegian name. But the rest of the info in movieclips seem separate.

  Someone has an idea how to do this? Can I use the trace function maybe? Here is my AS3 code so far:

  var loader: URLLoader = new URLLoader();

  loader.addEventListener (Event.COMPLETE, onLoaded);

  list.addEventListener (Event.CHANGE, itemChange);

  function itemChange(e:Event):void

  {

  your. Text = list.selectedItem.data;

  TB. Text = list.selectedItem.label;

  }

  var xml;

  function onLoaded(e:Event):void

  {

  XML = new XML (e.target.data);

  var it: XMLList = xml. Planter.Lauvtre;

  for (var i: uint = 0; i < il.length (); i ++)

  {

  list.addItem ({data: it.}) Farge.Text ([i]) + "\n"+ it.» Herdighet.Text ([i]) + "\n" + it. Hoyde.text ([i]),

  label: it. Botanisk_navn. Text() [i] + "\n"+ it.» Norsk_navn. Text() [i]});

  }

  }

  Loader.Load (new URLRequest ("lauvtre.xml"));

  Thank you!

  Rheus.

  I don't know what you're trying to do.  but, if you want to fill one combobox with the botanical names and when one is chosen, the other use of logins:

  var loader: URLLoader = new URLLoader();

  loader.addEventListener (Event.COMPLETE, onLoaded);

  list.addEventListener (Event.CHANGE, itemChange);

  function itemChange(e:Event):void {}

  var selectedObj:Object = a [list.selectedIndex]

  trace (selectedObj ['fan'], selectedObj ['Botanisk'], etc);

  }

  var xml;

  var a: Array = [];

  function onLoaded(e:Event):void {}

  XML = new XML (e.target.data);

  var it: XMLList = xml. Lauvtre;

  for (var i: uint = 0; i

  list.addItem({label:il[i].child('Botanisk_navn').toString()});)

  a [i] = {'Fan': it [i].child('Farge').toString (), 'Herdighet': it [i].child('Herdighet').toString (), "Hoyde": he [i].child('Hoyde').toString (), 'Botanisk':il[i].child('Botanisk_navn').toString(),'Norsk_navn':il[i].child('Norsk_navn').toString()};}

  }

  }

  Loader.Load (new URLRequest ("test.xml"));

• copy data from one database to another

  Hello
  
  I want to copy data from one database to another.
  
  I have two patterns such as
  
  dev1/dev@ORCL
  DEV2/dev@DCEL
  
  
  I have same tables dev1 and dev2 (tables)
  but I have not given in dev2 (tables).
  now, I want to copy dev1 (tables) in dev2 (tables).

  You can also use the database link:

  select * from dev1.emp@orcl;
  

  What database are you connected to?
  You must create and use the links in the database for all other databases.

  For example if you are connected to the database A and to retrieve data from database B, you must create a connection of database in base B

  create database link B connect to  identified by  using 'B';
  

  Then you can retrieve data from database B with

  select * from [yourschema.]yourtable@B;
  

  This will work only for tables that are visible to the user that you used in the definition of database link.

  Published by: hm on 10.08.2011 22:15

• How to get data from one or several times of perticuler dates

  (1) how can we get data from one or more dates perticuler.
  for example. date of 01/01/2011 and time is 00:00:00 to 23:59:59
  
  and
  
  (2) how can we get data from one or more dates perticuler.
  from date 01/01/2011 to 01/02/2011 date and time e.g. is from 00:00:00 to 23:59:59.
  
  can we?

  Hello

  Use a WHERE clause to include only certain lines.
  For example:

  SELECT     *
  FROM     table_x
  WHERE     dt     BETWEEN TO_DATE ( '01/01/2011 00:00:00'
                      , 'DD/MM/YYYY HH24:MI:SS'
                      )
            AND     TO_DATE ( '01/01/2011 23:59:59'
                      , 'DD/MM/YYYY HH24:MI:SS'
                      )
  ;
  

  In this example, the first date (before the keyword AND) and second (after the keyword AND) lie on the same calendar day. It's just a coincidence, they can be on different dates.
  The first date must not be later than the date of the second; If this is the case, you will get 0 found lines.

  I hope that answers your question.
  If not, post a small example of data (CREATE TABLE and only relevant columns, INSERT statements) for all tables and also post the results desired from these data.
  Explain, using specific examples, how you get these results from these data.
  Always tell what version of Oracle you are using.

• getting data from two servers?

  Experts-
  
  We have two servers for the storage of the tables. 1 history 1. current server Prod
  
  We have same tables in the databases server.
  
  All the info before one month from the date of the day are stored in database tables history server
  and the rest in database tables current prod server.
  
  
  I create reports such as when the user enters a date, OBIEE must check if the date is in a month (30 days) the date today or earlier at 30 days, on this basis, it must get data from historical Server database tables / running production database server.
  
  How can I implement this?
  
  I need to create two clusters of connction (RPD records) and develop the same model twice? (One for the historical paintings and one for prod tables?)
  or can I use the technique of fragmentation? If so, can you give me an idea hwow to implement the Fragmentation of this requirement?
  
  Thank you for your help in advance

  You must use the fragmentation of this requirement. It is not difficult once you understand the basic principle. Nico article read here for details:

  http://gerardnico.com/wiki/dat/OBIEE/fragmentation_content

  The only non-standard bit for you will be to define the criteria of fragmentation on your sources of logical table. This is the part that says BI server to hit source.

  After return here if you get stuck.

  Paul

• transfer of data from one server to another server

  transfer of data from one server to another server... How is possible?
  
  We used to transfer data of one cube to another using... report script... then load rule... so can we use even for that?
  but
  
  I would like to know any other comments and other means (like to explore)

  If you move the range of data to load into the different cube, then you can use report script or calc extrcat data and can use the rule files to load the data.
  If you move the data to load into a cube replicated in another environment, you can take the lev0 data and can do the free form of loading.

• Sending data from one component to another

  I want to send data from one component to another.

  Both are on the page of Main.mxml

  What is the best way to do it (without going into a frame)

  Who send data up to the main.msml via an event then complex treatment of vars public and pick up in the second pane, but is it possible to go straight?

  Thank you

  Dan

  Once the element keeps one reference to another. Or you set it to a global var shared by two components.

  C

• transmission of data from one container to another

  Hello

  Let's say I have two containers (Container1 = application, Container2).  Container1 receives data from user, do some search database and displays Container2 with database search results.

  -Container1 (call and display)-> Container2

  Below shows how I use a bindable variable in container1 for transmitting data of container1 in Container2.  Also shows how to display Container2 of container1.

  <! - Container1 - >

  " < = xmlns:mx mx:Application ' http://www.Adobe.com/2006/MXML ">

  
  

  ....
  [Bindable] public var foo:String = 'bar ';
  ....
  private void loginHandler(event:LoginEvent):void
  {
  mycontainer2 = new Container2();
  mycontainer2. Name = "mycontainer2";
  this.addChild (mycontainer2);
  }
  < / mx:Application>

  I am data access in Container2 as follows:

  <! - Container2 - >

  {mx.core.Application.application.foo}

  T1) is there a better way to transfer data from one container to another and to access the data?

  Q2) is the only way to call and display of the container1 Container2?

  Q3) how can I return to container1 Container2, i.e. Container2 call and display container1

  Container2-(back to)-> container1

  Best practices call for the use of custom events to share data between components. Here is my message from Flex 3 cookbook on the theme:

  http://cookbooks.Adobe.com/index.cfm?event=ShowDetails&PostID=15466

  To easily switch between containers 1 & 2 use a ViewStack, the gold standard for this interaction and manipulate the selectedIndex and selectedChild property:

  http://livedocs.Adobe.com/Flex/3/HTML/Help.HTML?content=navigators_3.html

  If this post has answered your question or helped, please mark it as such.