Get-hard drives - storage drives data store migrate between data warehouses

Similar Questions

• I use CS5.1 and installed a new hard drive. during the migration, PS now will not work. How can I reinstall? installation initial performed from the internet, no discs.

  I use CS5.1 and installed a new hard drive. during the migration, PS now will not work. How can I reinstall? installation initial performed from the internet, no discs.

  Download the CS5 products

• Can I install a stand-alone version of Lightroom on my IMac and my MacBook Pro and then use an external hard drive to store all my photos?

  Can I install a stand-alone version of Lightroom on my IMac and my MacBook Pro and then use an external hard drive to store all my photos?

  Yes.  To keep both computers synced, keep a copy of your catalogue on the EHD also.

• Get-hard drive | Measure-Object > list of objects

  I want to every amount of real "disk" 1 objects in the list / #. Rather than just the TOTAL SUM:

  Where does one would add or modify this script so it would list every-(VM-Name) of the object and the amount configured by VM?

  
  Thank you.. Please

  vSphere PowerCLI] C:\Program Files\VMware\Infrastructure\vSphere PowerCLI > Get -.
  VM 'xxx_name ' | Get-hard drive | where {$_.} Name - eq 'Disk 1'} | Measure-object - P
  CapacityKB-sum property. Select-Object amount

  Sum
  ---
  1317011456

  Try something like this

  Get-VM "xxx_name" |
  Select Name,
  @{N="HD1 Capacity";E={Get-HardDisk -VM $_ -Name "Hard disk 1" | Select -ExpandProperty CapacityKB}}
  

• How to get a manufactured HARD drive date?

  How to decode a serial number of the HARD drive to get the correct manufacturing date?

  I found some information, see the attachment below, but the HARD drive in question is SATA and serial number decodes to Feb 1997 which may not be correct.
  SN in question is 27MJFxxxx. Instructions below, 7 = 1997 - which would be 2007?

  Thanks for any help.

  -------------------------------------------------------------------------------------
  How to encode a Toshiba hard drive serial number?

  Toshiba serial number (S/N) includes the date of manufacture. The first digit of the serial number indicates the month of manufacture and the 2nd digit is the year.

  Example:
  M Y x x x x x x x
  M = month
  Y = year

  Data for the month goes from 1, for January, by 9 in September, then X, Y and Z, for October, November and December.

  Examples:
  2 8 1 7 0 0 0 1
  2 = February
  8 = 1998

  3 0 5 4 4 3 0 6 T
  3 = March
  0 = 2000

  X 9 7 8 3 3 1 T
  X = October
  9 = 1999

  The remaining digits contain information about the plant and the production line, and some numbers are reserved for a continuously running serial number.

  Hello

  I googled a bit and there are a lot of people that suggests how to read a serial number, I have no idea if he of right, but for example if you have a serial number: X7TO234534, then the product data would be October 2007 (X 7)
  X = 10 = October, Y = November, Z = Dec
  The first number is the month and the second digit is one year.

  So in your case, the serial number 27MJFxxxx should mean Feb 2007

  However, these are only some gossip on the internet and who knows if it of good or bad

• Shrink the hard drive (data in the data store file)

  Hello, I created a virtual machine with a 50 GB HD on ESXi 4.0.

  After installing all the software, I noticed that I am currently using only 5 GB of space and I need to support this thesis often I want to shrink the partition to 15 GB.

  The OS is Linux with LVM and it's great that I can move/shrink/expand with not too many questions, but how do I shrink a file of data existing in vmware?

  Get full even a migration between the old file and another smaller.

  A tip on how to get started with it?

  Thanks and greetings

  bellocarico

  The command of the is not available on ESXi.

  Maybe you can copy a static version of a Linux system, but I have not tried.

  André

• External hard drive & data backup, files, etc...

  Hello

  I have following questions.

  I have laptop Toshiba 32-bit system with Windows 7 Ultimate, inauthentic operating system installed on it.

  (1) my internal hard drive (built-in) has problems, I wonder if I get an external hard drive and install a genuine operating system on this subject and back up my files of residency on external hard drive disk and leave the player internal State, I would be able to use the computer correctly? Or should I get an internal hard drive attached, for the proper functioning of the computer?

  (2) since then, existing on the internal disk operating system has problems, if I decide to re - install a new operating system genuine on my internal drive, what is the best and safest to back up my files, folders, and data before installation?

  Any input in this matter will be greatly appreciated.

  Thank you.

  Night1

  Hello

  I have following questions.

  I have laptop Toshiba 32-bit system with Windows 7 Ultimate, inauthentic operating system installed on it.

  (1) my internal hard drive (built-in) has problems, I wonder if I get an external hard drive and install a genuine operating system on this subject and back up my files of residency on external hard drive disk and leave the player internal State, I would be able to use the computer correctly? Or should I get an internal hard drive attached, for the proper functioning of the computer?

  You can not install Windows 7 on an external drive. Windows 7 requires that install you it on an attached storage device internally. What you can do is to back up your current installation of Windows 7 on a hard drive external. Install a new hard drive, then restore the backup of this drive. To learn more:

  http://notebooks.com/2011/02/16/how-to-move-Windows-7-to-a-larger-hard-disk/

  (2) since then, existing on the internal disk operating system has problems, if I decide to re - install a new operating system genuine on my internal drive, what is the best and safest to back up my files, folders, and data before installation?

  http://notebooks.com/2010/12/27/how-to-backup-to-an-external-hard-drive/
  http://notebooks.com/2011/02/25/how-to-restore-a-backup-from-an-external-hard-drive-in-Windows-7/

  Any input in this matter will be greatly appreciated.

  Thank you.

  Night1

• Advice needed on the laptop hard drive data recovery.

  Hello

  I was wondering if someone could provide some advice on the recovery of data from an ACER laptop which was held in Microsoft Vista?

  The laptop broke due to the 'PIN' inside the power supply's cable breaking. PC World said that it would cost hundreds of pounds to repair.

  I have some important files saved on the drive hard (backup files conveniently failed too!) and I'd like back them.

  What are my options? Should I seek professional IT useful to do? Or I can try to get files back myself? I currently have a Toshiba laptop that works under XP.

  Hello Chris,

  I by removing the hard drive and put it in a USB enclosure. There are 2 types of one HD is IDE the other is SATA. You can buy one from Newegg.com for less than $ 15. You may need to take possession of the disc and its files if you do this. Here are the steps: to take ownership of a file or a folder how to appropriate a file you must have owner of a protected file to access. If another user has restricted access and you are the computer administrator, you can access the file to appropriate.

  To take ownership of a file, follow these steps:

  1. Right click on the file that you want to take control and then click Properties.
  2. Click on the Security tab, and then click OK in the security message (if one appears).
  3. Click Advanced, and then click the owner tab.
  4. In the name list, click administrator, or click the Administrators group, and then click OK.
     The administrator or the Administrators group now owns the file.

  To change the permissions on the file that you now own, follow these steps:

  1. Click on Add.
  2. In the list enter the object names to select (examples) , type the user or group account that you want to have access to the file. For example, type administrator.
  3. Click OK.
  4. In the group or user names list, click the account you want, and then select the check boxes of the permissions you want to assign to this user.
  5. When you're done to assign permissions, click OK.
  6. You can now access the file.

  How to capture a record you must have ownership of a protected folder to access. If another user has restricted access and you are the computer administrator, you can access the folder by taking possession.

  To take ownership of a folder, follow these steps:

  1. Right click on the folder that you want to take control and then click Properties.
  2. Click on the Security tab, and then click OK in the security message (if one appears).
  3. Click Advanced, and then click the owner tab.
  4. In the name list, click your user name, click administrator if you are logged in as administrator, or click the Administrators group. If you want to take ownership of the contents of the folder, select the check box Replace owner of subcontainers and objects .
  5. Click OKand then click Yes when you receive the following message is displayed:
     You are not allowed to read the contents of directory folder name. Do you want to replace the the directory permissions with permissions granting you full control?

     All permissions will be replaced if you click Yes. Note folder_name is the name of the folder you want to take charge.

  6. Click OK, and then reapply the permissions and security settings that you want for the folder and its contents.

  Let us know whether, if that helps you. Make it a great day!

  "In the end, the love you take, is equal to the Love You Make"

• Hard drive data from the sector error on desktop HP Pavilion magnesium grey Edition p6404y

  I have a HP Pavilion p6404y desktop computer. I uninstalled and reinstalled the HP Support Assistant. When I run the wizard it tells me this - "WDC WD10 EADS-65M2B1 CMSS Disk Device-4 errors in data sectors make unusable sector." He suggested I have a scanner. If I run the quick scan, it ends and shows just as fine. If I run a full scan, it reaches 62% complete (i.e. 99% of the "left foot" criterion) and seems to freeze. I left alone for two hours to get that last percent of this test, then I just give up and cancel, so I was not able to complete a full scan.

  Also, often, when I start my computer first, I get a screen that says: "one of your disks should be checked for consistency.

  Then, he turns his thing and says it is finished and then starts.

  It seems to be very slow all the time, too.

  I also, lately, get a box saying my performance is slow, I want to move from Windows Aero to Windows basic to help performance.

  So I wonder, my hard drive takes a dump, or what? This system is only two years old.

  Thank you!

  Hi techrex, I would say by restarting and pressing F9 to enter the Diagnostics screen and run diagnostics on your HARD drive.  If you get an error I'd say calling HP support to see what they suggest - could be that your HARD drive is on its way.

  If this is the case, immediately save all your work, photos, emails, etc..  Make your recovery DVD (press F11 at startup and have up to 4 ready virgins of DVD quality to make your recovery disks.

  If you need to replace the HARD drive yourself, it will be easy to recover the PC with your recovery discs.

  Remember: use esd protection and always disconnect your PC from the network if you plan to open the chassis and replace the HARD drive or perform another task on your PC, like blowing any dust with a can of compressed air.

  I would like to know if this suggestion helps.

• vSphere Esxi 4.1 - reconnected hard drive data lost

  Hello

  I have ESXI 4.1 running on a HP Proliant managed by Vsphere

  the virtual machine is a simple Windows Server 2008 R2 Std

  It runs on a data store that is a hard drive of 250 GB on the proliant

  I have a 1 TB drive also which I use as the drive data and this is added as a second drive.

  This allows me to disconnect the 1 TB drive. run and export the VM stop and save effectively just the virtual machine

  data on the 1 TB drive, that I Windows backup on a daily schedule.

  I run this procedure to stop the virtual machine

  disconnect the 2 disk which is the 1 TB data store

  running the export

  and then reconnect the hard drive 2 and restarting the virtual machine

  It worked great until last night.

  When I restored the data store, it has restored about dated February 2, 2013.

  I can't understand what has happened and really need help to avoid meeting in this new

  Fortunately, I can recover all the data since nightly backups that I ran a backup before you perform the procedure described above.

  I'm mystifed.

  Here's what I noticed when you unplug the hard drive 2 last night.

  Finally I did this procedure on February 2 and the backup to the top of the virtual machine

  After the virtual machine is stopped and exporting, then I went to add the hard drive I could see a dated 2nd February

  the thing is that I assumed it meant the date that his latest creation so don't think too much about. The data store is all most of the 1 TB drive so it's not like him both of them can store on disk. There are only two files vmdk files and that's what I expected to see.

  I started everything and checked to make sure that faulty data was available and it went well, Windows Server

  I didn't check the dates, but once the staff came this morning it began to be clear that nothing happened 2nd feb existed and actually I had added 2 disc hard back from this date.

  I have two questions that I can't answer

  1 where the hell is the data store frrom last night before disconnection? I just unplugged and not clicked the option to remove data.

  2 how a store of data of 1 TB of 2nd Feb suddnely may not appear in its place.

  If anyone can help solve me this problem I would really appreciate it.

  There are no snapshots more listed in the Snapshot Manager

  Although most of the time it's ok, not necessarily count on it (it's just a text file that contains the information of snapshot). Always check the settings of the virtual machine to verify that the virtual disk has no snapshot name (i.e... - 00000 x hard). The time shown for the files, is at once when the file descriptor hard (virtual disks consist of two files hard, a header/descriptor and a data file, but only the time stamp and the name of the header file and the size of the data file is displayed in the data store Explorer) has been changed, so it's ok if it shows when you run the consolidation.

  attached screenshots indicate it of okay now and be safe remove the DISK_1 and add in back without risk of that happening again?

  I'm sure DISK_1 point parameters of the virtual machine to the "Windows Server 2008 R2 Std_1.vmdk" and "Windows Server 2008 R2 Std_1 - 000001.vmdk" now obsolete and can be deleted. As previously mentioned, I suggest that you move this file into a new subdirectory and delete later if all goes as planned.

  André

• Get-hard drive on a single line of csv

  Hello

  
  I have to do a migration to a new san.

  I want to be able to move everyting off the old san to the new, but I also need to separate files vmdk to different LUNS.
  --------------
  ex:

  (VM1 (vmxfiles, Hd1, hd2, hd3) SAN1LUN1)--> (((VM1 vmxfiles) SAN2LUN0), ((VM1 hd1) SAN2LUN1), ((VM1 hd2) SAN2LUN2), ((VM1 hd3) SAN2LUN3))
  --------------

  I wish I could get a single line in a csv file:

  --------------
  ex:

  VMName, VMXFILESLUN, HD1, HD1LUN, HD2, HD2LUN, HD3, HD3LUN
  --------------

  Is it possible to have this command, which overlooks several lines

  --------------

  Get-disk hard - VM * | where {$_.} DiskType - "Flat" eq} | Select the Parent, name, file name

  Parent                                                             Name                                                              Filename
  ------                                                             ----                                                              --------
  VM1                                                         Hard disk 1                                                       [DS1] VM1/VM1.vmdk
  VM1                                                         Hard disk 2                                                       [DS1] VM1/VM1_1.vmdk
  VM1                                                         Hard disk 3                                                       [DS1] VM1/VM1_2.vmdk

  --------------

  Instead, format to give:

  --------------

  VM1, name, hard drive 1, VM1/VM1.vmdk disk, Hard [DS1] 2, [DS1] VM1/VM1_1.vmdk, Hard disk 3, VM1/VM1_2.vmdk [DS1]

  --------------

  Thank you

  Try something like that.

  Note that we need to sort the table with the longest row at the top, otherwise Export-Csv has a problem.

  $report = @()
  foreach($vm in Get-VM){
      $row = "" | Select VM    $row.VM = $vm.Name
      foreach($hd in (Get-HardDisk -VM $vm)){
          Add-Member -InputObject $row -MemberType NoteProperty -Name $hd.Name.Replace("Hard disk ","HD") -Value $hd.Name
          Add-Member -InputObject $row -MemberType NoteProperty -Name $hd.Name.Replace("Hard disk ","LUN") -Value $hd.Filename
      }
      $report += $row}
  $report | Sort-Object -Property {($_ | gm | Measure-Object).Count} -Descending | ` Export-Csv "C:\vm-hd-list.csv" -NoTypeInformation -UseCulture
  

• Installed hard drives data recovery serial

  As many other users on these boards, by X 205 won't start.

  My question: How can I recover the data on my hard drive, since there are two of them?

  I ran a search to find all the files I wanted (*.jpg in this case) and the search came back with hundreds of files (pictures) that I'm trying to recover... but it wont let me open them.
  I guess because the disks are installed in this machine series, somehow, I need to find a way to read them both to access these files?

  Any help is appreciated!

  Remove each disk of the machine, connect using 2.5 SATA box at the other PC as external device and you should have access to all stored data.

• Need new HARD drive to store 120GB 1.8 steel "speaker

  Hello

  I need to buy a new hard drive for my external 1.8 "store 120 GB steel box.
  The model number on this external hard drive is PA4136E - 1 HA 2

  What is the model of reader that is in them, is MK1229GSG.

  Hello

  I think (but I m not 100% sure) the enclosure supports SATA interface.

  But if you remove the internal HARD drive, then you will see the description of the HARD disk on the label.

  I think that you need a HARD SATA 1.8 for the speaker.

• Satellite A100 - hard drive data recovery

  Hello

  I recently tried to help a friend for his Toshiba Satellite A100 data recovery, died on this screen.
  I thought this would be a task simply remove the hard drive and put a HARD drive caddy and attaching it to another computer.

  This doesn't seem to work.
  Can I put the hard drive in the computer and I can hear start the computer to the top and was able to see it with a LCD display. I was able to delete the data in this way, so we're safe.

  My question is why do we seem to remove the disc and see on another computer?
  I guess it must be an interface or format the laptop can be used for the recovery section and cannot therefore be seen as a normal drive.

  If I could not delete the data because say the motherboard is dead. Is it possible to be able to see the data on another computer.

  E-mail: [[email protected]]

  > My question is why do we seem to remove the disc and see on another computer?

  Of course you can do if you want to use a symbol external USB SATA controller (external HARD drive) you should be able to connect to another computer.
  But if the HARD drive is faulty, it will not work.

• Hard drive data recovery/transfer

  I have a couple of different desktop computers HP Pavilion running Microsoft XP. The oldest machine motherboard has failed, and I added the hard drive of this computer to my another computer as a slave drive, so that I could transfer all files on the computer. When I start the computer I can see the extra disc, all its operating system files and user identities, but when I click on the user, where are the files is stored in the system tells me that this user is not accessible? When the drive was the old computer, I used a login password, such as the computer was shared, but system does not now appear to give me anywhere to type this in. How can I recover all my files?

  Hello:

  See if these two articles will help you get these files:

  http://support.Microsoft.com/default.aspx?scid=kb;en-us;308421&SD=Tech

  http://support.Microsoft.com/default.aspx?scid=kb;en-us;810881

  Paul