Toshiba stor. Connection wireless adapter E smartphone problem

Similar Questions

• Toshiba stor.e wireless adapter, WiFi password

  Hello, my problem is that I forget my wifi password
  Toshiba STOR. Connection of the E, solution no wireless card

  There is a small hole

  

  Use a paper clip or other object and that insert into the hole.
  Hold 5-10 sec and the settings must be reset again default

• Cannot connect Stor.E Wireless Adapter + 1 TB HDD in my laptop

  I recently bought a Stor.e wireless adapter for use with my partner Stor.e 1 TB HDD laptop but I can't seem to connect to my laptop.

  If I plug the HARD drive directly into my laptop everything appears also ok but if I connect via the wireless adapter that shows nothing. the instructions that come with the adapter are very poor, but after following the instructions stating "plug drive HARD adapter using the USB cable then plug taken adapter (AC power), the LED flashes of HARD drive and the lights on the wireless adapter showing 1, 2 green, solid = power, wireless = 3 green, strong." USB = blue.

  The disc shows hard on my Android phone and the android Tablet but won't connect, when you perform a scan for wireless on my laptop devices, the adapter cannot be found.

  I sent twice, the support from Toshiba on July 5 and July 10, but have not received the courtesy of a response although confirmation of receipt of my e-mail, so for them we will get back to you in the DAY a statement.

  ANY help with this problem would be highly appreciated.
  Thanks in advance.

  Hello

  Stor.E WLan adapter extends a USB HDD with the ability to access data stored via a WLan connection.
  This means that you must activate your WLan on your laptop and configure the Stor.E WLan adapter first.

  The 3 LEDS have the following meaning:
  Above 1 LED is on / off and lights up green if the adapter is running
  The LED 2 is WiFi link and turns green where wi - fi access has been established.
  The 3rd (first from the bottom) lights up blue when the HARD drive is mounted. Flashing LED means read/write mode.

  How to connect?
  Connect adapter to Canvio Stor.E WLan adapt to the B USB 2.0 (near the reset button) microphone connector and connect the USB HDD to the type A USB 2.0 connector.

  You will need to activate the laptop s Wlan and press the reset button (hold it long 4 sec). The Wireless settings, you should see the Canvio Stor.E open wireless card that you connect access point.

  Then, in the Web browser using IP address: "http://198.168.65.1" to access the settings page of the Canvio Stor.E wireless adapter.

  In the preview, you can see the current version of the firmware, storage devices, network access point information.

  The list of devices shows detailed information on connected devices.
  Within the network, you can find the devault sotre.e wireless adapter network settings

  Now, you can use an Android application called Toshiba Wireless Adapter to move files on the HARD drive connected to the WiFi adapter from your smartphone.

  You can also map the card wifi as a network drive in Windows system.
  In type of Explorer: \\198.168.65.1. then right-click and choose map network drive.
  In a new window, select the application letter to the new drive (Z) and click the Finish button.

• Toshiba 32RL933 - what wireless adapter I can use?

  Hello

  I have a macbook pro (latest version) which has intel WiDi and my tv has intel WIDI also remind that I could use the one I have in my house, but as I understand it, it is that I need a wireless adapter.

  I have one here at home, but it didn't work. (d-link dwa-140)
  I was wondering if it was my mistake, or if this adapter in question does not work on my TV.

  I would also like to know if the only one that works is the toshiba adapter or y at - it one adapter other than the toshiba that works.

  Thank you

  flaviotobi, after having read pages 13, 48 and specification of the pages (81), the manual of your model TV, (32RL933), the manual of English to me, at least, indicates that only the Toshiba dual-band wifi adapter is suitable for wireless networks and functions of WiDi.

  In my opinion, the use of the available USB only is a concern, this does not allow the use of the function of time-shift TV, because this feature requires the use of a flash or connected USB HARD disk drive.
  It is my opinion that the time shift function is more convenient than having the WiDi or wireless network card and find the cable system without problem, in my case.

  If I want to display anything from my laptop on the TV, I use HDMI, (via a HDMI auto-box switch), because I have multiple devices share available on my 32RL900A sockets and having only a USB taken is a little embarrassing, but as I have said in other forums, we buy what we can afford...

  donhe7

• Partner Toshiba Stor.e 2.5 "power USB3 problems

  I had the partner Toshiba Stor.e 2.5 "external hard drive USB3 for about 5 months and couldn't be happier... until tonight.

  I have it plugged into my laptop Satellite Pro and nothing happened. It seems that the fault is where the cable connects to the device. If I pull the cable up the light blue lights and voltage of my hard drive, when I let go the power ceases.

  It seems that the connection of the device is quite fragile and I can move it up and down easily.
  I took care of the product and have not been subjected to undue constraints so I'm not very happy.

  Has anyone else had this kind of problem?
  Is this a design flaw or a single random problem?

  Can it be fixed?

  Thank you very much
  Mallrat 999

  Hello

  You you connected this external USB HDD two USB ports on your laptop?
  I think that you must use a USB cable to Y that allows to connect the HARD drive to two USB ports, because this HARD drive needs 900mA.

  The common standard USB 2.0 port (I guess that your laptop supports only USB 2.0) provides 500mA and usually is not enough for the USB 3.0 HARD drive.

  Another solution could be the use of the USB hub using an external power supply.

• Declining connection wireless adapter and lock up my computer

  I have a Linksys WUSB54G version 4 adapter.

  My computer is running Windows XP, Service Pack 3, which is automatically updated at all times.

  I used the adapter for a year with no problems.

  Suddenly, he began to lose the connection to the Linksys router and then lock up my computer works only a hard reboot turned off.

  When she returns to the top, some or all of my cookies are lost.

  I ran several different security packages, but no virus or other problems have been discovered.

  I uninstalled the adapter and reinstalled.

  The last time, as a result of an article I read on this site, I installed it without the Linksys software, just the drivers.

  If it does not correctly without Linksys utility then continue using the Wireless Manager Windows to connect to the wireless network.

  You have another PC which is connected to the router. Try to install the adapter wireless on the other PC and see if it works on this computer.

• Satellite A100-014: connection Wireless D-link router problem

  I think that it is working properly. I keep getting kicked from WLAN (connected to the dlink DWL 900AP), but if I plug the Ethernet cable it works very well.

  This vista software is a major pain. It will let me install the d-link software.

  Does anyone have any knowledge about it?

  If you need the d-link software you must ask the manufacturing of router for these updates or visit the support site for manufacturing.

  What WLan encryption are you using? I used WPA2 and I had similar problems.
  My router and the wireless network card were not 100% compatible with this encryption.

  Now I use the WPA or WEP and it works.

• G50 - 70 - connection Wireless at PC startup problem

  When I start my laptop(G50-70) wireless no poster no matter what connection. I have to press the wireless button next to the square of the charge. And there work, I can connect to the internet after that. But it's annoying for me to push that button every time when I start my computer. Last week, I install program YAC to remove unwanted programs, spy etc. and add a lot more speed for my computer. After that my Lenovo Energy Manager program was wrong. I think that the problem is with that. I can't remove or install Manager again. He said "1605-Error". Could you give me an idea to solve this problem? Thank you

  Mod edit: System model added to the subject line to improve visibility / clarity

  I formatted my computer. The problem occurred because of energy Manager. I contacted Lenovo call center. They said that it is the only way to format the computer to resolve this problem.

• Connection blackBerry Bold 9700 Smartphone problems

  I have problems connecting my device with the USB cable.  I tried three cables, and while my PC see my Blackberry Bold 9700 and evenb acknowledges his PIN code, it does not synchronize.  I tried to uninstall and reinstall the software, but to no avail.

  Can anyone help?

  If you have the correct version installed for your operating system (for example. Windows 32/64, Mac, etc.) and you run the program with administrative privileges then the end of the computer should be g2g.

  On the top of my head, you want to make sure that the SD card is not write-protected, otherwise I would just do a backup then a reload of the sw of pocket.

• Store.E wireless adapter Firmware

  Three questions:

  1. I can't find an update firmware for the device.

  2. I can't seem to find the components to build the new firmware for it (it is obviously using a linux GPL, etc.)

  3 Telnet seems to be activated... What is the username/password so I can't change, because it obviously is back.

  Thanks for sharing the link

• Toshiba stor.e connection of wireless network card

  Hello. I bought the stor.e wireless adapter and I am totally disappointed. I was expecting to connect to my WiFi router and then I could access it as a network within my normal system drive.

  Unfortunately, it creates its own wifi network and devices need to connect directly to the adapter for access. This makes the camera useless for me, because I wanted to access my files on my local network far enough away where the adapter signal does not reach.

  Is it possible to make it to fix on my local network and I can access it from there?

  A second problem is that the Android on 5 Android app does NOT work. 4.4, I can see the files, on 5 I can't.

  Totally threw the money. If these problems not corrected soon I would not recommend this product or anything affiliated with someone I know.

  The STOR. E wireless adapter can be used as part of an external HDD or SSD hard drive.
  It supports hard disks up to 2 TB, and it allows you to access the data stored on the HARD drive using the Android app.
  This is the main function of this STOR. E wireless adapter.

  You can also map the card wifi as a network drive in Windows system.

  In Explorer types:
  198.168.65.1. then right click and choose map network drive.
  In a new window, select the application letter to the new drive (Z) and click the Finish button.

• My toshiba laptop is not getting connected wireless if I have SID and key no.

  I have the model Toshiba Satellite laptop and I am not able to connect to a wireless home line. If I have SID and no. Key, my laptop is not be connected. I used it earlier.

  You will be please to restore the settings the parameter as he cites the 87122 defect.
  Thanking you,
  Manguin
  / * original title: my computer is toshiba laptop connect wireless if I have SID and key no. I * /.

  Have you applied the hotfix in this article?

  Error message when you try to run the Network Setup Wizard update for Windows XP Service Pack 2, Service Pack 3, or Windows XP Tablet PC 2005 Edition wireless

• Unable to connect via the wireless router "problem with wireless adapter or access point" _

  Hello

  I recently replaced my old Toshiba laptop with a new model of Toshiba Satellite L500/033HNX, it installed Windows 7.

  The problem is that I can't connect to my wireless network. I am currently connected via Ethernet cable to my Linksys router.

  I had help from my internet service provider, the installation correctly the problem not because of the connection.

  I had a Linksys online support, the router is a wireless, model - WAG54G ADSL gateway, is not the problem of all the correct settings and other devices can connect via my wireless network. I ran Dr. connectivity several times and it is always impossible to connect, "problem with the wireless adapter or access point.

  OK, you're my next hope to solve the problem can you HELP Please!

  Hi, JoelbX
  I want to thank very you much for your support and effort do to help me solve this problem, but we receive have been, and I don't want to waste any more of your valuable time, so I am the son of closing and deleting of Tring in Microsoft Answers.
  All the best
  Tring

• Error problem USB wireless adapter "Wireless LAN adapt Wireless Network Connection 4:

  Hello

  I can't access the internet via a USB on my desktop PC wireless adapter. In fact, I received the following message:
  Wireless Network Connection 4 Wireless LAN adapter:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Double Belkin N + Wireless USB adapt
  Physical address.... : E8-5B-5B-49-DD-CD
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Please help me solve the problem.

  tanks

  Hello

  Welcome to the Microsoft community. I will certainly help you with the problem you are experiencing.

  I would like to ask you some questions, in order to better understand the issue.

  1. What is the exact model of the Belkin USB adapter?

  2. What is the brand and model of your computer?

  3. When was the last time it was working fine?

  4. Remember to proceed with software or hardware changes recently?

  This problem may occur if there is a conflict with a third-party software or due to an outdated driver, to diagnose this issue further and solve the problem, try the following methods.

  Method 1: Run the network troubleshooter

  I suggest you to run the network troubleshooter utility. It will automatically detect and solve the common problems that can cause problems with the network. To run this utility, you can follow the article below:

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2: Network Wi - Fi problems and

  Follow the Microsoft article on wireless and wired network problems. Click on the link below:

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this information was useful. Do not respond with answers, because it will help us to find and provide you with a better resolution.

  Thank you

• Unable to connect to Wi - Fi network - 'problem with wireless adapter or access point '.

  When I try to connect to the network Wi - Fi Home I get error like:- Windows cannot connect.

  When I click on solve problems I see error below :-'problem with wireless adapter or access point '.

  We reinstalled OS

  We rested the router

  We are able to connect to Wi - Fi in other laptops, notebook and mobile

  We have updated all the drivers of network also.

  Please help me solve the problem.

  Hi Niranjan,

  Thank you for your support. In fact, the problem is with the Router Configuration, because with any other router device, we are able to connect to Wi - Fi in the laptop.

  Thank you