Get information of PXI digitizer

Similar Questions

• Get information from the low level of the Subvi ni5660

  A quick explanation of the problem: I need to create several VI just to return a value of the PXI-5660 (ex: Center frequency, Span, etc.) while the entries are only a "VISA" and one "error in.»

  Detailed explanation of problem: I need to create multiple VI that the properties 'Set' or 'Get' of the PXI-5660 module (ex: the Central frequency value, get frequency, etc...).  Each VI must have a VISA in/out and in/out Error, but the only other present in/out should be the property of game/called.  Global variables are not allowed.

  One of the biggest problems for me is that ni5660 drivers do not contain a property node.  I managed to (apparently) set some of the properties by feeding only a single entry in the icon 'configure ni5660 for spectrum', but the only tool that seems to be able to output all information is the icon «MT get Attributes»  The release of 'MT get Attributes' does not contain many of the properties that I need good output.

  I tried to use the icon 'MT get Attributes' linked to "ungroup by name" which has the value "handle receiver.handles.niScope" which feeds on the reference to a property niScope node, hoping that I would be able to obtain information through the niScope 5660 (it seems that ni5660 software uses the niScope on a lower level software ", correct me if I'm wrong).  This VI finished, when put online with the 'ni5660 Initialize.vi' and ' ni5660 Close.vi, ' returned the error (-1074135028) with the explanation 'ID attribute not recognized.' ""  (The error occurred on the property node in the Subvi "Get the Central frequency")

  The goal is to make the action of PXI chassis similar to a HP8563E Spectrum Analyzer.  With this in mind, the list of attributes that I will need in the end to set and get (the separate VI) are the following: Center frequency, Span, window, number of Points, resolution bandwidth, level of reference, mitigation and time sweep.

  I apologize for my (very probably) simple question, but endless (I only started programming in LabVIEW there about 2 weeks).  If someone would be able to point me in how to make apparently PXI-5660 current property settings from thin air, I would be very grateful.  If more information or details are needed, feel free to ask.

  Thank you

  zdunn wrote:

  ....

  but unfortunately, I'm still at a loss, how to create a VI that "calls" that same property back and the fate, while using only 'VISA In' and 'In Error' as inputs.

  Located on how silly that statement. You want to create a function where (for example) you want to set the resolution bandwidth and do not want to pass as a parameter the name of the instrument. You have created the programming language that is able to read minds?

  You can use a function where you can pass a parameter in (or use a function that retrieves a parameter) or do nothing at all with the instrument. It is more complicated than that.

  There are tutorials available that can help yu with LabVIEW to learn, but I think that there are certain fundamentals means.

  Edit: Sorry, I may have misunderstood. to query does not require an entry but I don't understand what you want to query. The parameters of the instrument are all under control stripped - a program you or any other writing. Unlike a GPIB instrument, there is no one '?' command to read a rear frame. It is assumed that you know how the instrument has been configured in the first place.

• Where can I get information on each new "free app of the week"?

  Where can I get information on each new "free app of the week"?

  On the App Store.

• Why can't get information from frequency of NI USB-5132

  Hello

  I use NI USB-5132 and try OR Scope example measure a library.

  I wonder why I can't get information from the input signal frequency.

  Thank you

  In the flexible Panel, you need to adjust the time/Div and, possibly, the Volts/Div to get a consistent result. Make a note of the settings.

  Based on what you used in the soft cover, you must change the parameters of the VI until you see a signal. If you don't see something here, then obviously you can not perform a measurement. Try other examples to see if you can capture at least the waveform.

• How to connect windows media with internet player, to get information out of cd & dvd when I pull them out?

  Could not get information of cd or dvd media when I pull them out on windows media player

  Hello

  What operating system is installed on the computer?

  In many cases, the reader can download information from the media for you and add it to your files automatically. For example, when you rip a CD, the player can search an online database and download information from media on the tracks on the CD.

  The player can periodically analyze the contents of the Player library for items that are missing information on the media. First, it matches the items in your Player library to entries in the online database, and then it downloads the missing media information and adds it to the files in the Player library automatically.

  For more information, see the following article:

  Add or edit media information in Windows Media Player:

  http://Windows.Microsoft.com/en-us/Windows7/add-or-edit-media-information-in-Windows-Media-Player

• How can I get information to reinstall windows vista?

  I had to replace a hard drive and install windows, but I lost the drive and other information that came with my laptop.

  How can I get information to reinstall windows?

  How to replace the Windows Setup disks depends on how you bought Windows.

  When you bought a copy of Windows retail:

  How to replace Microsoft software:
  http://support.Microsoft.com/default.aspx/KB/326246

  If Windows came with your computer - to replace the installation disks:

  Contact the OEM computer manufacturer and ask them to send you an installation to your computer disk - they may charge a small fee. Contact information for the manufacturer of your computer can be found here:

  http://support.Microsoft.com/GP/oemphone/

• OSD-04011: GetFileInformationbyHandle() failure, unable to get information about the file

  Hi all

  I try to get my ORACLE ASM (v 11.1.0.7) software works on Windows Server 2008 Standard SP2 (32-bit), but unfortunately, I hit the next windows operating system error with no resolution in sight.

  OSD-04011: GetFileInformationbyHandle() failure, unable to get information about the file
  S/O-error: incorrect function (OS 1)

  Basically ORACLE software try to read the header information of a partition of existing online RAW drive. According to the error made ORACLE unrecognized function call. How can I make this feature available? Need help ASAP please.

  http://www.Microsoft.com/windowsserver2008/en/us/community.aspx

  They will help you in Windows Server communities at the above address.

  Here is the Vista Forums.

  See you soon. Mick Murphy - Microsoft partner

• get information from the sms message

  How to get information from sms

  ex: 1. the sender's phone number

  2. sms text

  Check the interface messages and methods like getAddress(), text, getPayLoadText.

• I always get informed that I need to insert a removable media, small footprint.

  I always get informed that I need to insert a removable media, small footprint. Can I use icloud? If so, how?

  Ask people to support iCloud.

• Songs disappearing; error message: "unable to listen to a number of files queued. To get information about the problem, click on the icon next to each file in the list pane. »

  I get this error message: "unable to listen to a number of files queued. To get information about the problem, click on the icon next to each file in the list pane. "The thing is that he played the songs darned two days ago, what has happened since then!

  Never mind. I totally forgot that I had renamed a folder that hosts my music. Duh.

• How to get information of parameters of a procedure in my schema?

  Mr President.

  My oracle database is ee 11g.

  My schema name is ash.

  I have a procedure in it. How to get its parameter information.

  the code of procedure is

  create or replace PROCEDURE "EXPORT_DB_PROC" AS    
     h1   NUMBER;    
     dt   VARCHAR2 (20);    
     myschema VARCHAR2(32):='ash';    
  BEGIN    
     SELECT TO_CHAR (SYSDATE, 'YYYYMMDD')    
       INTO dt    
       FROM DUAL;    
      
      
     h1 :=    
        DBMS_DATAPUMP.OPEN (operation      => 'EXPORT',    
                            job_mode       => 'SCHEMA',    
                            job_name       => myschema||'_EXP_' || dt,    
                            VERSION        => 'COMPATIBLE'    
                           );    
     DBMS_DATAPUMP.set_parallel (handle => h1, DEGREE => 1);    
     DBMS_DATAPUMP.add_file (handle         => h1,    
                             filename       => myschema||'_EXP.LOG',    
                             DIRECTORY      => 'ADMIN_DIR',    
                             filetype       => 3    
                            );    
     DBMS_DATAPUMP.set_parameter (handle      => h1,    
                                  NAME        => 'KEEP_MASTER',    
                                  VALUE       => 0    
                                 );    
     DBMS_DATAPUMP.metadata_filter (handle      => h1,    
                                    NAME        => myschema||'_EXPR',    
                                    VALUE       => 'IN('''||myschema||''')'    
                                   );    
     DBMS_DATAPUMP.add_file (handle         => h1,    
                             filename       => myschema||'_EXP_' || dt || '.DMP',    
                             DIRECTORY      => 'DATA_PUMP_DIR',    
                             filetype       => 1    
                            );    
     DBMS_DATAPUMP.set_parameter (handle      => h1,    
                                  NAME        => 'INCLUDE_METADATA',    
                                  VALUE       => 1    
                                 );    
     DBMS_DATAPUMP.set_parameter (handle      => h1,    
                                  NAME        => 'DATA_ACCESS_METHOD',    
                                  VALUE       => 'AUTOMATIC'    
                                 );    
     DBMS_DATAPUMP.set_parameter (handle      => h1,    
                                  NAME        => 'ESTIMATE',    
                                  VALUE       => 'BLOCKS'    
                                 );    
     DBMS_DATAPUMP.start_job (handle => h1, skip_current => 0, abort_step => 0);    
     DBMS_DATAPUMP.detach (handle => h1);    
  END;    
  /
  
  

  How to get information on the parameters (names and types etc.)

  Concerning

  Hello

  SQL > create or replace procedure proc (tes1 number) start the null; end;
  2.

  Created procedure.

  SQL > desc proc
  Proc PROCEDURE
  Name of default input/output argument type?
  ------------------------------ ----------------------- ------ --------
  TES1 NUMBER IN

  Are you referring to the right parameters of proc right?

  Think simple

  -Thank you

  Pavan Kumar N

• currently still have PP CS5.5 & want to install on another office, understand that I can only use one at a time. don't have a CD, can I get information from the current installation and a link to download PP CS5.5?

  currently still have PP CS5.5 & want to install on another office, understand that I can only use one at a time. don't have a CD, can I get information from the current installation and a link to download PP CS5.5?

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

  Find your http://helpx.adobe.com/x-productkb/global/find-serial-number.html serial No.

• Get information for clip loaded in the source using ExtendScript monitor

  Hello

  So, the short version: I was wondering if there is a way to get information about the clip currently loaded in the source, using ExtendScript monitor. Specifically, I am interested in the name, from timecode and in/out points. I don't see anything obvious in the ExtendScript Toolkit data browser, but I thought I'd ask.

  The long version of what I'm trying to do: I have a clip in the source monitor Panel that I know is in the active sequence. I would take the points of entry/exit from the source element and those like entry/exit points in the sequence. It's kind of a hack to get around the fact that you can't associate speech analysis with a multicam clip so I cut with one of the audio clips in the multicam clip and then I am translating those points to the multicam editing sequence. I have a way to do it with an AppleScript macro, but I would find a more robust solution (and cross-platform).

  Thank you!

  There is no possibility of returning to an element of the Source monitor to real projectItem in Agency CC 2015.

  However, you are not the first to ask such a feature, and (ahem) I can neither confirm nor deny that it can be added in the near future.

• When the press the play button, how we get information of angle in every second time bar?

  

  When the press the play button, how we get information of angle in every second time bar?

  You can get the values of rotation for each image by calling the method. valueAtTime() on the Rotation property. So, if you want to know what the value is at the 2 second mark...

  layerObj.property("ADBE_Transform_Group").property ("ADBE Z rotation").valueAtTime(2, false);     'false' includes the results of the expression, 'true' does not work.

• How can I get information to a CSV file?

  Hey everybody! Happy to be here.

  Someone at - it a script very well commented that explains what's happening from one trying to get information on a CSV file?

  I started a script, but I can't tell where I'm wrong. Here's what I'm trying to achieve:

  1. I have a CSV file with ~ 100 lines. Each row has 5 pieces of data...

  (Filepath 1. local to an image) (2 film title) (3. Runtime) (4. Side) (5. Description)

  2. I try to select a random line of 100 (this is what I need help) and fill the data in a document active photoshop (I got this covered part).

  Here's what I have so far, but I don't know that I'm heading in the right direction. I pointed out in some issues in the code. The random move does not work and I can't figure out how to get the data in a specific column into a variable. Someone at - it a preview?

  var myCSV = new File('ENTER-FILEPATH-HERE/the-csv.csv'); myCSV.open('r');

function getRandomInt() {
return Math.floor(Math.random() * (99 - 2 + 1)) + 2;    }
while (!myCSV.eof)    { 

// myCSV.readln() only returns the data that is the last row in the CSV file, no matter what I put in the "()" How do I manipulate this? 
var lines = myCSV.readln(getRandomInt());   
var lineItems = new Array();    lineItems = lines.split(",");    }       

// My check to see what data I'm getting. I always get back the last row of data in the array.   
$.writeln(lineItems);       

// Does the [1] refer to the column to get the data from? Or am I misunderstanding this? How do I select the appropriate column to put into the variable?   
var arrImage = lineItems[1];   
var imageRef = File(arrImage);   

// This is where Photoshop gets hung up. The filepath isn't attached to the imageRef variable.   
var docRef = app.open(imageRef);

myCSV.close();

  I appreciate any help!

  Edit-formatting

  File.Readln () does not take an argument. You need to read the entire file, split the file into lines, then pick a random row in this table. Something like:

  function randomElement (ary) {}

  return ary [Math.floor (Math.random (ary.length) * ary.length)];

  };

  var str = file.read ();

  var str.split(/\r|\n/ = lines); This RegExp is not complete

  var randomLine = randomElement (lines);