Get several blue screen BCCODE: 7F WIN7 64

Similar Questions

• Why I get this blue screen error? BCCode: 116

  Every now and then I get error blue screen during the game, that's what he said after a hard reset.

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.256.1
  Locale ID: 1033

  More information about the problem:
  BCCode: 116
  BCP1: FFFFFA8012FD6010
  BCP2: FFFFF8800FAE3918
  BCP3: FFFFFFFFC000009A
  BCP4: 0000000000000004
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 256_1

  All the drivers are up to date and they have been reinstalled twice on my video card. Fusion driver even used to be sure he was nothing before you install the latest drivers, currently (as of this post), the most recent is 304.79.

  I do believe that it is a heat problem that nothing under load exceeds 51 c.  The error code is consistent.

  Restored 301.42 pilots and the error occur again, and that's what I got after a hard reset.

  Signature of the problem:
  Problem event name: BlueScreen
  OS Version:6.1.7601.2.1.0.256.1
  Locale ID:1033

  More information about the problem:
  BCCode: 116
  BCP1:FFFFFA800A3E44E0
  BCP2:FFFFF8800FD471A4
  BCP3:FFFFFFFFC000009A
  BCP4:0000000000000004
  OS Version: 6_1_7601
  Service Pack: 1_0
  Product: 256_1

  Told me to increase my voltage of the CPU by just a little bit, but I don't know too much about.

  Motherboard: MSI P67A - C43 (B3)

  CPU: Intel Core i5 - 2500K @ 3.30 GHz

  RAM: 2 x Corsair DDR3 PC3 - 10700H 4096 MB

  GPU: Nvidia GeForce GTX 460 SE

  PSU: Coolmax CL - 600 g, 600W

  HARD drive: Hitachi HDS721050DLE630

  All devices are up to date same BIOS. Nothing is Overclocked.

  0 x 116 BSOD re.

  "It is not a true crash, in the sense that the blue screen was launched only because the combination of material and video driver video was to be insensitive and not because of any exception processing synchronous".

  Since Vista, the components of "Timeout detection and recovery" (TDR) of the subsystem video OS have been able to do some really impressive things to try to find issues that would have led to the earlier OS like XP to crash.

  As a last resort, the TDR subsystem sends a video driver command "Please restart you now!" and wait a few seconds.

  If there is no answer, the BONE concludes that the combo of driver/hardware video has really collapsed in a heap, and it fires at this stop 0 x 116 BSOD.

  If playing with video driver versions did not help, make sure that the box is not overheated.

  Try to remove a side panel and a fan of big sector directly to the motherboard and GPU.

  Run it like that for a few hours or days - long enough to check whether the cooler temperatures make a difference.

  If so, it could be as simple as dust accumulation and inadequate cooling afterwards.

  I download cpu - z and gpu - z (both free) and keep an eye on the video time

• Several blue screens: Windows 7 Home Premium: what can I do else?

  I got this Dell N5110 and one blue screening during the 9 months.  I got the replacement of the hard drive with the Dell Diagnostics indicating otherwise by car tool.  I get various blue screen corrupted with Page Pooling, code, images of memory, and I'm here are more.

  The computer came with software preinstalled and the new hard drive.  All the drivers seem to be updated with the latest.  I have not updated the BIOS. It is a guarantee if you close the laptop the next time that you open will be on a blue screen.

  What I did:

  Updated drivers

  hard drive enabled for error dell diagnostics and Microsoft

  memory had tested dell and Microsoft diagnostics

  completed all updates from Microsoft

  use the Microsoft Security Essential antivirus

  use the dell online verification tool

  used Microsoft on the line tool

  Event logs would take a year to go and understand.  In any case to look at the dmp files easily?

  Any help would be appreciated.

  Danielle

  Hello

  Ntoskrnl.exe is a component of Windows which means than anything else he has led astray.

  Most often, when there are several different Bug_Check material is involved such
  like memory, video, motherboard or other.

  BlueScreenView provides excellent information however as suggested in the
  link to troubleshooting it is best to check the BCCode or stop Code with Faultwire and
  MSDN for the methods to solve the problems as well as those in the troubleshooter.

  If necessary post minidumps so we can analyze them that "may" provide more
  Details.

  I'll be at Microsoft Summit PST USE starting tomorrow and may not be
  able to provide a lot of support until Saturday next week (March 3).  If you need more
  help I will be able to provide during this time, it would probably be a good idea
  to another new question so that others are more likely to participate to help. Just refer
  paste them into this thread.

  ==========================================================

  It's actually better to post the codes Bug_Check or stop than just the
  BOM. These 3 respectively either 1.0 a and 1st well there
  are other similar codes.

  As I said above, since there are several material Bug_Checks is likely to be involved
  If you also check the drivers and other possibilities of the software.
  

  To see how to use BlueScreenView and MyEventViewer to troubleshoot the Bluescreens see the
  Methods indicate in this thread - top 3 responses (+ 1 other).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------

  BCCode: 1a 0x0000001a

  Remove ALL power and reinstall all the memory cards and cables (both ends where possible).
  in fact, remove and replace - don't do not just tight. Make sure that the vents are clear and that the
  the fans are working. Even if the temperature is OK assume no heat does not affect the video,.
  sound or other system functions that it these get hot. Try adding a small fan blowing in
  the vents as a test. (These are especially for a PC not a laptop.)

  Have you recently added any hardware? Have you updated any drivers just before this started?
  (Check control panel - updates of Windows to see if all drivers have been updated it on the)
  This started the time) likely guilty hand are video driver, other great drivers, memory, and
  antivirus/antispyware/security products could be at fault as well as reader questions.

  Use the troubleshooter below and refer to the following message to drivers and memory when
  you get these sections and then back to the resolution of the problems according to the needs.

  BCCode: 1a 0x0000001a<-- read="" this="" link="" read="" this="">
  http://www.faultwire.com/solutions-fatal_error/memory-management-0x0000001A-* 1041.html? order = votes

  ==============================================================

  BCCode: 0a 0x0000000A

  Check these KB

  Error message on a blue screen on a computer that is running Windows 7 or Windows Server
  2008 R2: "STOP: 0X0000000A"
  http://support.Microsoft.com/kb/979444

  Stop error message on a computer that is running Windows 7 or Windows Server 2008 R2 and
  who has the iSCSI storage: "0x0000000A"
  http://support.Microsoft.com/kb/979711

  Those and 5 other KB Articles are available
  http://support.Microsoft.com/search/default.aspx?mode=a&query=0x0000000A&SPID=14019&catalog=LCID%3D1033&1033comm=1&Res=10

  -----------------------------------

  BCCode: 0a 0x0000000A

  Drivers could be at fault, however the problems of disk or security/antivirus/antispyware products are
  just as likely to be the root cause that they can force a driver to corrupt or go out of bounds.
  The video driver or something affecting it would be questionable.

  Make sure that the drivers, BIOS and chipset of low-level drivers are all updated by checking manually
  system manufacturer and device manufacturers sites.

  Below I'll post a generic bluescreen convenience store and in the next message how to upgrade
  drivers and BIOS as well as controls memory.

  -----------------------------------

  BCCode: 0a 0x0000000A

  Cause

  This bug check is issued if the memory paged (or invalid) is accessible when the IRQL is too high.

  The error that usually generates this bug check occurs after the installation of the faulty device driver or service system, BIOS.

  If you encounter a bug 0xA control during the upgrade to a later version of Windows, this error can be caused by a device driver, system service, an anti-virus or a backup tool that is not compatible with the new version.

  Solve the problem

  If a kernel debugger is available, get a stack trace.

  To resolve an error caused by the faulty device driver or service system, BIOS

  1. Restart your computer.
  2. Press F8 to character-based menu that displays the choice of operating system.
  3. In the Windows Advanced Options menu, select last known good Configuration . This option is most effective when a pilot or a service is added at a time.

  To resolve an error caused by an incompatible device driver, system service, virus scanner, or backup tool

  1. Check the system log in Event Viewer for error messages that may identify the device or driver that caused the error.
  2. Try disabling the cache in memory of the BIOS.
  3. Run the diagnostics of equipment provided by the manufacturer of the system, in particular the scanner memory. For more information about these procedures, see the manual of your computer.
  4. Make sure that the latest Service Pack is installed.
  5. If your system has cards (SCSI) small computer system interface, contact the card manufacturer for updated Windows drivers. Try to disable sync negotiation in the SCSI BIOS, check the wiring and the SCSI ID of each device and confirming the proper termination.
  6. For devices (IDE) peripheral electronic integrated, set the built-in as only primary IDE port. Also, check each IDE device to the right setting master/slave/stand alone. Try to remove all IDE devices except for the hard drives.

  If the message appears during installation of Windows, make sure that the computer and installed devices are listed in the list of the products tested Microsoft Windows market.

  Comments

  Before upgrading to a new version of Windows, remove all third-party device drivers and system services and disable any antivirus. Contact software manufacturers for updates of these third-party tools.

  BCCode: 0a 0x0000000A<-- read="" this="">
  * 1025.html http://www.faultwire.com/solutions-fatal_error/IRQL-not-less-or-Equal-0x0000000A-

  ==================================================================

  BCCode: 1st 0x0000001E

  Remove ALL power and reinstall all the memory cards and cables (both ends when)
  possible) - in fact, remove and replace - do not just tight. This is for a PC and on all
  that can be done for a laptop is reinstall the memory and clear the vents. Make sure the BIOS.
  low level chipset drivers and key device drivers are all up to date by check manually to the
  manufacturer websites.

  Bluescreens many are caused by the BIOS, drivers from the chipset level low and other main device drivers
  that are not the latest, even if the computer is new. Manually check for updates
  using the methods of updates as indicated in the resolution of the above issues and/or methods
  below (which are the same).
  
  
  BCCode: 1st 0x0000001E

  Cause

  It is a very common bug control. To interpret it, you must identify which exception has been generated.

  Common exception codes include:

  • 0 X 80000002: STATUS_DATATYPE_MISALIGNMENT

    An unaligned data reference was encountered.

  • 0 X 80000003: STATUS_BREAKPOINT

    A breakpoint or ASSERTION was met when no kernel debugger was attached to the system.

  • 0XC0000005: STATUS_ACCESS_VIOLATION

    A memory access violation has occurred. (Parameter 4, verification of bug is the address to which the driver attempted to access.)

  For a complete list of exception codes, see the ntstatus.h file located in the directoryInc. of the Windows Driver Kit.

  Resolution

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques. If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates. Try changing video cards. Check with your hardware vendor for updates to the BIOS. Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

  If the exception code 0 x 80000003 occurs, this indicates that a breakpoint coded hard or assertion was hit, but the system was launched with the/nodebug. switch. This problem should occur infrequently. If it occurs repeatedly, make sure a kernel debugger is connected and the system is booted with theSwitch/DEBUG .

  In case of exception code 0 x 80000002, the trap frame will provide additional information.

  If you don't know the specific cause of the exception, the following should be considered:

  Hardware incompatibility. First of all, make sure that all new equipment installed is listed in the list of the products tested Microsoft Windows market.

  Service system or driver faulty device. In addition, a chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

  If a driver is listed by name in the bug check message, disable or remove that driver. Disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, the service may be removed by the system startup by using the Recovery Console and by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help determine the device or driver responsible for control of bug 0x1E. Disable the cache in the BIOS memory could also resolve the error. You must also run hardware diagnostics, especially the scanner memory, provided by the manufacturer of the system. For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is incompatibility of the system BIOS. BIOS problems can be solved by upgrading the version of the system BIOS.

  BCCode: 1st 0x0000001E<-- read="" this="">
  * 1045.html http://www.faultwire.com/solutions-fatal_error/Check-to-be-sure-you-have-adequate-Disk-Space-0x0000001E-

  ==================================================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during ' blue screen of the.
  death ' crashes and displays information about all accidents of a table.
  Free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista (also Windows 7) Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Installed Windows 7 on my netbook but keep getting the blue screen while surfing Web sites

  Hello!

  First of all, this is my first post time on these forums, I often read them and think they are great!

  Now on to my question, I recently installed Windows 7 on my LG x 110 netbook. I ran the windows Upgrade Advisor 7 and confirmed that my netbook managed to all the minimum requirements for a 32-bit install. After installing Windows 7 my pc works perfectly (better than XP in fact) has installed all of the drivers needed to run automatically unless the driver for my microphone and my 3gs integrated internet which I managed to resolve. The only problem I have is sometimes while surfing the web, I get the blue screen of death and my netbook restarts. I was not able to understand by myself am so regarding this forum hoping to repair... I contacted LG for information on downloading upgraded drivers, but got a response from them saying that my pc is not supported with drivers for windows 7. Here is some information from the Center problem with Windows 7, I don't know if it's necessary info, please tell me where to find the correct information and how to access it.

  Problemsignatur

  Information additional om problemet

  BCCode: c2

  BCP1: 00000007

  BCP2: 00001097

  BCP3: 8078AE94

  BCP4: 8078AE74

  OS version: 6_1_7600

  Service Pack: 0_0

  Product: 256_1

  Bucket ID: 0xc2_7_RTL8187Se! PlatformFreeMemory + 1 b

  ServerInformation: 47840a85-d17f-4bd7-8fa5-f385071573a0

  Any help is greatly appreciated as I really want to re - install Windows XP because Windows 7 runs so well, even on a low technical specifications.

  Handelsenamn: BlueScreen

  OS version: 6.1.7600.2.0.0.256.48

  Sprakvariant-ID: 1053

  It seems that you have a C2 Bad Pool Caller error, which is difficult to analyze without the minidump file.  If you googled around and find WinDBG, you can open the minidump file.

  Look for the line: nom_image: it will tell you exactly what file has caused the error.  If all goes well, once you find exactly what caused the error, you can search for updated drivers/software.  At first glance, I would say it was the Realtek drivers because you see the line RTL8187Se in your info.

  My MSI Wind U100 netbook works also Win7 perfectly.  Double boots with MacOSX too, just because I wanted to see if I could do it.  I change the hard drive (for a bigger) and added the RAM.  Nothing low spec thereon compared to what was needed for WinXP when it came out!

  Try this driver, it should do the trick.  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PFID=40&level=5&Conn=4&ProdID=172&DownTypeID=3&GETDOWN=false&downloads=true

  And since this is the NETWORK/connection wireless card driver, he explains why the errors come during surfing!

• the pc switches work and I get a blue screen when the driver is installed

  INSTALLATION DRIVER CAUSES BLUE SCREEN AND SWITCHING TO AND SUITE

  I have re-installed windows xp pro several times and everythong is going fine until I install the drivers from the disk. pc switches work and I get a blue screen with a RECOVERED FROM A GRAVE... message. I also have a xp(not professional) of windows disk, it works with the drivers, but the pc doesn't seem to work as well. I want to run xp pro version, that's why I bought it. Help, please.

  It makes no difference, what version of Windows XP, you install, it will make no difference to his execution, or use. (with the exception of you want to join a domain)

  If your PC boot after installing winxp pro, visit your PC manufacturers site, or the site of the motherboard and to get the latest drivers for Windows XP a go from there

• Windows Vista crashes, I get the 'Blue screen of Death' and I have to restart. Different errors each time it crashes.

  Windows Vista crashes, I get the 'Blue screen of Death' and I have to restart. Different errors each time it crashes. I tried to reinstall vista without success of the problem being fixed

  Hello

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  Displays information on all the "crash" of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Blue screen BCCode: 1000007e at startup

  I've decided to upgrade to windows 10 to try it. I like it and back downgraded to windows 7 Configuration section then updates now whenever I get to the part of the flag of my computer not start I get a blue screen. I can go into safe mode fine that how I'm typing this.

  I've read about it and they said to do a new install of windows 7 I have rather not if can. So I'm in safe mode, how can I fix this problem, I tried startup repair and I have no system restore or the image of the restore points for some reason any. Everything in safe mode works fine.

  Here's what I got when I'm in safe mode, first time

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 1033

  More information about the problem:
  BCCode: 1000007e
  BCP1: FFFFFFFF80000003
  BCP2: FFFFF88002D1002D
  BCP3: FFFFF880009A9328
  BCP4: FFFFF880009A8B80
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 768_1

  Files helping to describe the problem:
  C:\Windows\Minidump\051416-72774-01.dmp
  C:\Users\User\AppData\Local\Temp\WER-85925-0.SysData.XML

  Read our privacy statement online:
  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\system32\en-US\erofflps.txt

  So is there anything I can do instead of reinstalling windows 7 to fix the blue screen?

  Thanks for the outfit in advance, I am not great with computers

  You had an accident in December, it's January and the other in may so not a serious problem, but it is related to avkmgr.sys pilot of the Manager of Avira GmbH

  I would remove it years use MSE in its place.

  http://www.Microsoft.com/security_essentials/

• I did a factory restore and still get the blue screen message.

  Separated from this thread.

  I did a factory restore and still get the blue screen message. Windows says it is searching for a solution, but is never a solution. What can I do?

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 1033

  More information about the problem:
  BCCode: 124
  BCP1: 0000000000000000
  BCP2: FFFFFA8004A7E1D8
  BCP3: 00000000B 6000000
  BCP4: 0000000000010015
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 768_1

  Files helping to describe the problem:
  C:\Windows\Minidump\050515-27159-01.dmp
  C:\Users\papreps\AppData\Local\Temp\WER-120136-0.SysData.XML

  Read our privacy statement online:
  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\system32\en-US\erofflps.txt

  Hi papreps,

  Thanks for posting your query on the Microsoft Community.

  As the posts above mention, the problem comes from your drivers.  Crashes BSOD (Blue Screen of Death) are usually caused by bad drivers (manufacturer code) and incorrectly blamed on the operating system. Make sure you have the latest chipset drivers installed with the latest version of the BIOS.

  I suggest you to download and install the latest drivers from the manufacturer's Web site.

  Try the procedure described in the following Microsoft Help article.

  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  , Note 1: Running chkdsk on the drive if bad sectors are found on the hard drive, while the bad sectors can be refunded but there may be loss of data.

  Note 2: Data or files that are infected by malware could be beyond cleaning and must be completely deleted to preserve the integrity of your system, which means that there could be a risk of data loss.

  Keep us posted on the State of the question, we will be happy to help you.

• Blue screen BCCode, Local Id - 1033 - d1

  Please help solve this problem

  After installation of Quick Heal Total Security 2013 my friend computer reboot laptop Compaq Presario CQ40 and therefore his cell phone does not

  each time system get a blue screen

  When I start the laptop in safe mode it showing this message stated below

  /////////////////////////////////////////////////////////////////
  Problem event name: BlueScreen
  The system version: 6.1.7600.2.0.0.256.1
  Local ID: 1033

  BCCode: d1
  BCP1: 00000004
  BCP2: 00000002
  BCP3: 00000000
  BCP4:8B04FB02
  OS Version: 6_1_7600
  Service Pack: 0_0
  Product: 256_1

  //////////////////////////////////////////////////////

  I restore my laptop to a friend earlier restore point (before you install Quick Heal antivirus), then work to laptop

  but when I install Quick Heal antivirus then new problem start again

  Please help me solve this problem

  I am pleased, glad to hear it!

  I did some research on this subject, it is always useful to learn more. It seems to be a decent antivirus, so if it works for you, you can use it if you wish. If this is not the case, as I mentioned above, Microsoft Security Essentials is a great alternative.

  Make sure you also as I mentioned the Service Pack 1 update if you have not already.

  Kind regards

  Patrick

• I get a blue screen how to fix this?

  Whenever I'm going to Youtube.com or Listenonrepeat.com my computer gets a blue screen and a message saying that the driver does not stop, and as I log back on I get this:

  Signature of the problem:

   

  Problem event name: BlueScreen

  OS version: 6.1.7601.2.1.0.768.3

  Locale ID: 1033

  More information about the problem:

   

  BCCode: 116

  BCP1: FFFFFA800A1A84E0

  BCP2: FFFFF88004F8DFE0

  BCP3: 0000000000000000

  BCP4: 0000000000000002

  OS version: 6_1_7601

  Service Pack: 1_0

  Product: 768_1

  I tried to solve this problem to a Microsoft website that had information on this subject, it contained a fix for touches me, I had use but no results that continues to be to my computer, please if you have any advice for me, it would be much appreciated.

  
  "It is not a true crash, in the sense that the blue screen was launched only because the combination of material and video driver video was to be insensitive and not because of any exception processing synchronous".

  Since Vista, the components of "Timeout detection and recovery" (TDR) of the subsystem video OS have been able to do some really impressive things to try to find issues that would have led to the earlier OS like XP to crash.

  As a last resort, the TDR subsystem sends a video driver command "Please restart you now!" and wait a few seconds.
  If there is no answer, the BONE concludes that the combo of driver/hardware video has really collapsed in a heap, and it fires at this stop 0 x 116 BSOD.

  If playing with video driver versions did not help, make sure that the box is not overheated.
  Try to remove a side panel and a fan of big sector directly to the motherboard and GPU.
  Run it like that for a few hours or days - long enough to check whether the cooler temperatures make a difference.

  If so, it could be as simple as dust accumulation and inadequate cooling afterwards.

  I download cpu - z and gpu - z (both free) and keep an eye on the video time

• While playing some games I get different blue screens. Include messages: WHEA ERROR INCORRIGIBLE and a common one is CLOCK WATCHDOG TIMEOUT.

  While some games I get different blue screens and I can not understand what causes them, this only happens when I play a bit of some games. Include messages: WHEA ERROR INCORRIGIBLE and a common one is CLOCK WATCHDOG TIMEOUT. I tried a new install of Windows 8 and this problem still occurs these games has worked on the same computer with Windows 7.

  Original title: Windows 8 BSOD

  Tom

  They have been linked to the material (since obviously you re-installed), two of them were corrupted because of the speed of the accident.

  If you're a clocking over please return to default (overclocking pushes the material beyond the design of the ists)

  Please run a malwarebytes scan before starting on the underside

  Please download the free version of Malwarebytes.
  Update immediately.
  Do a full scan of the system
  Let us know the results at the end.

  http://www.Malwarebytes.org/products

  Stop 0 x 124 is a hardware error
  If you are overclocking try to reset your settings to standard processor and see if that helps.
  If you keep getting the BSOD here are things more than you may want.
  This is usually hardware related, defective heat, memory or processor even if it is "possible" he is associated (rare) driver.
  
  Stop 0 x 124 - what it means and what to try
  Synopsis:
  A "stop 0 x 124" is fundamentally different from many other types of bluescreens because it arises from a complaint of material.
  Stop 0 x 124 minidumps contain very little concrete information, and it is therefore necessary to address the problem as a case of material in an unknown state of distress.
  

  Generic troubleshooting ' Stop 0 x 124 ":

  1) to ensure that none of the hardware components are overclocked. Material which is pushed beyond its design specifications - by overclocking - may malfunction in unpredictable ways.
  (2) ensure that the machine is sufficiently cooled.
  If there is doubt, open the side of the case (be aware of all the relevant conditions guaranteed!) PC and direct an electric fan squarely to the motherboard. Who will rule on most cooling problems (lack of).
  3) update all drivers related to materials: video, sound, RAID (if applicable), NIC... anything that interacts with a piece of hardware.
  It is best to run the latest drivers anyway.
  (4) update the BIOS of your motherboard according to the manufacturer's instructions.
  Their website should provide detailed instructions on the brand and model-specific procedure.
  (5) rarely, bugs in the operating system may cause "false positives" 0 x 124 events where the hardware wasn't complaining, but Windows thought otherwise (because of the bug).
  At the time of writing, Windows 7 does not have to suffer from a defect, but it is nevertheless important to keep Windows up-to-date.
  6) trying (stress) test these hardware components that can be put to the test artificially.
  The most obvious examples are the RAM and HDD (s).
  For the RAM, use the 3 rd-party memtest86 utility to run several hours a test value. (6-8 passes to stress the ram)
  For hard drives, verify if CHKDSK /R finds any problems on (s), including "bad sectors".
  Unreliable RAM, in particular, is mortal, as well as software, and anything other than a 100% clear memory test result is cause for concern. Unfortunately, even a 100% clear result the diagnostic utilities does not guarantee that the RAM is free of any defect - only that none have been encountered during the test passes.

  
  7) as the last of the non-invasive troubleshooting steps, perform a "Vanilla" Windows reinstallation: just the OS itself without additional applications, games, utilities, updates, new drivers - or ANYTHING that does not come from the Windows 7 disc.
  Who stops working mitigate the problem of the 0 x 124, jump to the next step.
  If you run the "Vanilla" installation long enough to convince yourself that not a single 0 x 124 accident occurred, start installing applications and updates slowly, always stopping between successive additions long enough to get an idea of the question if the machine is still free of 0 x 124 breaks down.
  Smash back, obviously the latest addition of software may be somehow connected to the root cause.
  If the stop error 0 x 124 persist despite the above steps, and the equipment is under warranty, consider to go back and ask for a replacement that does not suffer periodic MCE events.
  Be aware that want to perform the subsequent hardware troubleshooting steps can, in some cases, void your warranty:
  (8) clean and carefully remove the dust inside the machine.
  Reinstall all memory modules and connectors.
  Use a can of compressed air to clean the RAM DIMM supports as much as possible.
  (9) If all else fails, start removing items of hardware one by one in the hope that the culprit is something non-essential that can be eliminated.
  Obviously, this type of testing is much easier if you have access to equivalent components in order to perform swaps.

  If you are in the situation to have completed all the steps above without a resolution of the symptom, unfortunately the most likely reason is that the error message is literally correct - something is fundamentally wrong with the hardware of the machine.

• Installed the network updated drivers hp support page now I get the blue screen of death

  Installed the network updated drivers for my laptop hp support page and now I get the blue screen of death a few minutes of Internet usage.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063 & LC = on & CC = US & DLC = in & sw_lang = & Product = 5171...

  I can reboot the computer, but it only works for a little bit before again becoming the blue screen.

  I tried to download and reinstall the hp 8 drivers network twice now. (Product number: QJ793AV-#ABA)

  I am running windows 7 (x 64) and downloaded all the updates as well.

  Any help would be greatly appreciated.

  I made an another windows update and seems to be ok for now

• I get the blue screen of death, I do before going to the Geek squad?

  I get the blue screen of death, I then close my pc and restart in safe mode and then trouble shoot. I can then restart normally and then it is fine for awhile. I don't always have to be on the internet to get the blue screen. I have AVG and super anti-spy ware and run full scans and they say that there are no threats. So what else can I try?

  Messages you receive when you restart the computer, more a review of the event viewer should help you determine what is causing the BSOD.  The BSOD is not necessarily related to malicious software.

  You have posted in the forum for the forum of anti-malware for Microsoft Security Essentials (MSE).  Since you're using AVG, your post is off-topic for this forum.

  You can expect from a forum moderator move your message or if you want to, you can seek assistance in search and/or post in the appropriate Forum Windows:

  http://answers.Microsoft.com/en-us

  Kind regards...

• Get the blue screen when you create a new message or the response message in OWA Exchange 2007

  Get the blue screen when you create a new message or the response message in OWA (Exchange 2007)

  Hello

  I suggest you post the question in the forums and check them off below if it helps:

  http://social.technet.Microsoft.com/forums/en-us/exchangesvrclients/

  It will be useful.

• Recent upgrades: KB2419640, KB976902, KB890803 when installed I can't start and get the blue screen.

  After that the installation of upgrades KB2419640, KB976902, KB890803 I'm unable to boot.  I get the blue screen.  I used chkdsk, memtest etc. No problem.  I disabled the upgrades to prevent settling.   I'm not comfortabel thereby.  Is there a solution?

  You are able to boot mode safe? If you can, do and run System Restore:

  To access the system recovery environment in Windows 7, simply start your PC, just before the system loads the Windows operating system. Press the [F8] key function 8 on your keyboard which will launch the menu Advanced Boot Options. You will see a new option 'Safe Mode', select this option and press 'Enter' on your keyboard.

  System Restore -Windows 7 features - Microsoft Windows

  After you're booted in Normal mode, click Start, all programs > Windows Update

  Check for updates, now updates you're experience problems with, each of them right click and click "hide update".

  If they are updated driver in particular, do not install them, hide them instead, any update of the driver offered, instead of this download directly from the manufacturers Web site.

  HowManage , Configure and troubleshoot Windows updates releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP