Why I cant remote AimTTi TG2511A func. General through VISA?

Similar Questions

• why I cant player to access itv now when I could always? He returns with "an error occurred during the processing of your request."

  why I cant player to access itv now when I could always? He returns with "an error occurred during the processing of your request."

  Hi James,

  Let us know a few details about the issue.

  1. which operating system you have installed on the computer?

  2. what web browser do you use to open itv player?

  3. are you able to play other videos online on other sites?

  If you use Internet Explorer, then you follow these methods.

  Method 1:

  You can run the fix for video problems in Internet Explorer.

  Playing video files crashes or blocking Internet Explorer - Windows

  http://support.Microsoft.com/mats/video_freezes_or_crashes/

  Method 2:

  You can also follow the steps in the following article and check.

  The video problems when you use Internet Explorer

  http://support.Microsoft.com/kb/2532294

  Note: The Reset Internet Explorer Settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings and Add-ons. We recommend that you note these sites before using Internet Explorer settings reset feature and re - activate the Add-ons.

  Feel free to get back to us for other queries.

• PC migration - converter could not connect to the remote computer. A general error occurred: unknown internal error

  Hello

  I am brand new to fusion m v so forgive me if I miss useful information of the first post time around.

  I try to use migrate your PC, feature of VM Fusion 8 but I see the error in the title of the topic when I try to start the import operation.

  I have disabled the firewall on the PC and MAC

  I tried over ethernet and direct connections

  When I run the migration of PC Windows tool, he complains that UAC is enabled even if it is not (confirmed via Control Panel and evolution via the command prompt)

  When you try to migrate, it accepts the PIN and then shows a warning on this certificate, that I choose to browse

  He will then ask admin username/pass on the PC (I tried my only regular and also tried setting a new admin user and try this)

  After that, I see the error: the migration of PC - Converter could not connect to the remote computer. A general error occurred: unknown internal error

  Should I keep trying to get this working, or that it will be more easy to find a way less direct to turn the PC to a virtual machine on the Mac?

  I found the logs on mac and have posted what I think is the appropriate one below, but not really sure:

  LOGS *.

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: Log for USB VMware pid = 3550 Arbitration Service version 12.1.0 = Build = build-3272237 option = output

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: The process is 64-bit.

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: Host codepage = UTF-8 encoding = UTF-8

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: Host is Mac OS X 10.10.5 (14F1713), Darwin 14.5.0

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: VTHREAD initialize main thread 3 'usbArb' tid 119357

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: DictionaryLoad: could not open the file "/ Library/Preferences/VMware Fusion/config ': no such file or directory.

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: Preference of option of PREF file found in/Library/Preferences/VMware Fusion / config. Using the default values.

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: DictionaryLoad: cannot open the file ' / dev/null/Non-existing DEFAULT_LIBDIRECTORY / settings ": not a directory.

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: Preference of option of PREF file not found at/dev/null / Non-existing DEFAULT_LIBDIRECTORY/settings. Using the default values.

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: DictionaryLoad: cannot open the file ' / dev/null/Non-existing DEFAULT_LIBDIRECTORY / config ': not a directory.

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: Preferences optional PREF file not found in/dev/null/Non-existing DEFAULT_LIBDIRECTORY / config. Using the default values.

  2016 04-21 T 11: 12:50.089Z | usbArb | I125: DictionaryLoad: could not open the file "/ var/root/Library/Preferences/VMware Fusion / config ': no such file or directory.

  2016 04-21 T 11: 12:50.089Z | usbArb | I125: Preferences optional PREF file not found in/var/root/Library/Preferences/VMware Fusion / config. Using the default values.

  2016 04-21 T 11: 12:50.089Z | usbArb | I125: Deactivation of the preferences of the user PREF because disableUserPreferences is set.

  2016 04-21 T 11: 12:50.089Z | usbArb | I125: PREF cannot load the user's preferences.

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - PARAMETERS GLOBAL/dev/null / Non-existing DEFAULT_LIBDIRECTORY/settings

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - NON PERSISTENT

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - USER PREFERENCES

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - default USER IS/var/root / Library/Preferences/VMware Fusion/config

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - HOST by default IS/Library/Preferences/VMware Fusion/config

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - SITE by default IS/dev/null/Non-existing DEFAULT_LIBDIRECTORY/config

  2016 04-21 T 11: 12:50.091Z | usbArb | I125: USBArbRuleStore: loading rules of "/ Library/Application Support/VMware/usbarb.rules".

  2016 04-21 T 11: 12:50.091Z | usbArb | I125: VMware USB Arbitration Service Version 15.1.7

  2016 04-21 T 11: 12:50.091Z | machPoll | I125: VTHREAD beginning thread 4 'machPoll' tid 119359

  2016 04-21 T 11: 12:50.366Z | usbArb | I125: USBArb: trying to connect to an arbitrator on/var/run/vmware/usbarbitrator-socket.

  2016 04-21 T 11: 12:50.366Z | usbArb | I125: SOCKET create new socket, connect to/var/run/vmware/usbarbitrator-socket

  2016 04-21 T 11: 12:50.366Z | usbArb | I125: SOCKET connection failed, error 2: no such file or directory

  2016 04-21 T 11: 12:50.366Z | usbArb | I125: USBArb: unable to connect to the existing arbitrator.

  2016 04-21 T 11: 12:50.398Z | usbArb | I125: USBArb: UsbArbPipeConnected: connected to the customer, outlet: 4

  2016 04-21 T 11: 12:50.399Z | usbArb | I125: USBArb: 3450 Client connected (version: 7)

  Well well just in case someone found this one in the future, the question turns out to be that my PC has been joined to a domain, but I was connected to a local account. I solved the problem by leaving the field. There may be other ways to work around this problem.

• Win2012 Server. Y at - it a shortcut to reach the Collections to the remote desktop Services without going through the Server Manager

  Win2012 Server. Y at - it a shortcut to reach the Collections to the remote desktop Services without going through the Server Manager?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Why do you want my piece of sound through my TV sony vaio when I use the HDMI connection

  original title: sound through my tv speakers
  Why do you want my piece of sound through my TV sony vaio when I use the HDMI connection

  Hello

  What version of OS are you using?

  Check if the sound configuration is set to HDMI

  1. click on start, click on Control Panel

  2. click on the Audio tab, select read. Now, check if you have selected Digital Audio (HDMI).

• Why my colors appear dimmed after the recording through photoshop?

  Why my colors appear dimmed after the recording through photoshop? When you record directly from bridge they appear sharp and vibrant, but after taking a recorded image and open in Photoshop and resave after retouching, colors appear then faded and less saturated on this picture.

  Always convert to sRGB, whenever a file is needed to correctly display without color management.

• Why I cant find saved e-mail or general notification ringtones ringtones?

  Hi and thanks for your support!    I recorded a few ringtones for my Motorola DROID to sync from computer. I created a folder in Astro Manager of files called ringtones - logical right?  In any case, now these ringtones are only available under the ringing phone and NOT of Notifcation Ringtone or ringtone Email.  Any ideas?  Thanks again

  For ringtones will appear under notifications, you will need to create a folder called "Notifications" and copy your ringtones.  You will be able to use them as notifications and for email.

• Why the iTunes remote control app get access to music from Apple on my Mac?

  I'm used to control my iTunes on my Mac with the Remote app. My Mac is connected to my stereo, so this used to be the ideal solution for remote access to my music. I have recently subscribed to music from Apple, but the remote application does not support this. Apple will do an update to allow remote access to Apple's music?

  The app still supports the control of iTunes. Do you have home sharing enabled and the paired app?

• WHY I CANT WATCH VIDEO STREAM

  CANT PLAY VIDEO STREAM IT CONTINUES by SAYING ME Windows Media Player cannot play the file. The player might not support the file type or does not support the codec used to compress the file.

  Hello

  Welcome to the Microsoft answers site!

  This problem may occur,

  (a) the file type is supported by the drive, but the file was compressed by using a codec that is not supported by the player.

  (b) the file might have been encoded with a codec that is not supported by Windows Media Player. If this is the case, Windows Media Player cannot play the file.

  I suggest you try the following steps:

  Step 1: First, check to see if Windows Media Player streaming video settings is enabled. To do this, follow the steps below:

  (a) open Windows Media Player and click on organize.

  (b) go to options and select the network tab.

  (c) under the network tab, select all the boxes to check and try.

  Step 2: To determine what codec was used with a specific file, play the file in the player, if possible. When the file plays, right click on the file in the library and then click on properties, the file, look at the Audio and video codec codec.
  

  
  Step 3: download and install the Codecs:

  Follow these steps in Windows Media Player:

  (a) click the arrow below the now playing tab, and then click Other Options.

  (b) on the Player tab, select the check box automatically download codecs .

  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

  (, Read the player always try to download codecs automatically?)

  Step 4: when you open Windows Media Player next, the option plan you will find the stream menu bar. In the menu bar of data flow, please apply the settings you want to the stream and the video game under streaming options.

  If this does not match the type of video file that you are trying to replicate with windows media player default programs.

  You can make the default program using set Associations.

  (a) open default programs by clicking the Start button, click default programs.

  (b) click on associate a type of file or Protocol with a program.

  (c) click on the file type or protocol that you want the program to act as the default value.

  (d) click the program of change.

  (e) click the program that you want to use by default for the selected file type, or click the arrow next to other programs to show other programs. (If you don't see other programsor your program is not listed, click Browse to find the program that you want to use and then click Open. If no other programs are installed that are able to open the type of file or Protocol, your choice will be limited.)

  (f) click OK.

  Step 5: Configure the protocol settings To change the Protocol for the player settings

  (a) click the arrow on the reading tab, click More Options, and then click the network tab.

  (b) make the desired changes.

  (c) If you disable the TCP , or if your firewall TCP stream blocks box and the player are configured to use the RTSP protocol, the player will try to receive the streams by using the UDP protocol. If you also clear the UDP check box, or if your firewall blocks broadcasts that use these protocols and the player is configured to use the RTSP protocol, the player will try to receive the streams by using the HTTP protocol.

  http://Windows.Microsoft.com/en-us/Windows-Vista/which-protocols-does-Windows-Media-Player-use-for-streaming

  Now, check if the problem is resolved.

  Please see the link below for your reference:

  http://support.Microsoft.com/kb/911710

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• why I cant before pictures in received email

  Why can not transfer photos to an e-mail received

  Using Vista Windows Mail? Tools | Options | Send | Mail sending Format. HTML settings. Make sure to send pictures with messages is enabled.

• why I cant sinc ipod nano (1.1.3 with iTunes 12.4.3)

  Since I updated iTunes to 12.4.3 on my computer, my podcasts will be is more sinc for my iPod nano (1.1.3)

  If you tell iTunes either automatically synchronize podcasts (when you connect iPod), go to the Podcasts of the iPod settings screen

  

  When you configure automatic synchronization of podcasts.  Make sure it is configured to Synchronize Podcasts (checkbox), and it is configured to synchronize the desired podcasts ( all podcasts or selected podcasts).

• Remote access Windows Server 2012 through internet with desktop connection

  Summer messing about with it for days and don't get no love.

  Try to connect with Windows 7 Ultimate edition to Windows Server 2012 Data Center version from outside my home network, Starbucks or McDonald's or my server at home.

  Tried all these steps found in this promising and useful article:

  http://Windows.Microsoft.com/en-us/Windows7/allow-remote-desktop-connections-from-outside-your-home-network

  1. Allow connections to the computer you want to access remotely. DONE - ADDED to THE SERVER AND NON-ADMIN ACCOUNT to RDP GROUP of ROLES, using network level authentication. Connection of Win 7, so this method of authentication should not be a problem, I assume.

  2. Make sure that remote desktop is able to communicate through your firewall. DONE - FOR BOTH PUBLIC AND PRIVATE RULE.

  3. Find the IP address of the computer on your home network you want to connect. MADE - by using the ipconfig/all command

  4. Open your router configuration screen and worms forward port 3389 for TCP IP address of the destination computer. DONE - NOT TCP/UDP but TCP only, internal and external port goes. Note: The use of a booster signal wifi at the end of the House, it is a problem that requires additional configuration? I don't think he has an ip address or acts as a router. But in desperation I can try unplugging then again head the local Starbucks to try to connect.

  5. Find the IP address of the router so that the remote desktop can be found on the Internet. DONE - using "what is my ip", pretty easy.

  6. Open Remote Desktop connection, and connect. ACTUALLY, I think THAT, IN ENTERING [ip router]: 3389.

  But the result of the message is always the typical:

  (1) remote access to the server is not enabled.

  > But this is not true, that I am capable of the DRC at home on the server machine.

  (2) computer remote is not off.

  > But this is not true, as I just left home 30 minutes and sometimes it's rarely, only restarted.

  (3) the remote computer is not available on the network.

  > Don't know what that means. Of course the remote computer is not on the network, I am on right now. It's on my home network. But I can ping my router ip via cmd, then coming to the outside can be done; through my router, I should be able to access inside my home network port forwarding w. But no love.

  So... what to do, what to do...

  The wifi booster is a problem?

  Connects to the Data Center edition a problem?

  What happens if I uncheck the option ' use authentication NLA, is that the passage of the security risk?

  Any ideas about the configuration I could be missing before giving up and go for VPN or TeamViewer. I would really like to see materialized during all the time that I put in trying to run the DRC.

  Thanks for any input.

  / Markus

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Two VPN clients remote need to Exchange resources through PIX501

  I would like to have remote VPN clients ping each other and exchange their resiurces directly through pix501.

  Is this possible? If so, how can I make it work?

  With the current code of 6.x, u / shooting VPN traffic between sites or remote access clients is not possible, when this traffic ends on the same interface.

  Pix 7.0 code is provided as a feature, which is scheduled for release in Q3.

  Thank you

  Peter

• Port changed to remote desktop - could not get through the firewall of Windows 7

  In order to get my two work computers from home (via my router) I changed the port number for the remote desktop on one of the machines. Now, I can not him (even to my network of local work) unless I have turn off the Windows Firewall.  With the firewall disabled I can access it fine (with the new port number).  I tried establishing a new rule of inbound traffic but have not been able to get this to work.  What is the process step by step to creating the rule for inbound traffic for that to happen?

  Hello

  The Microsoft Answers community focuses on the context of use. Please reach out to the business community of COMPUTING in the TechNet forum below:

  http://social.technet.Microsoft.com/forums/en/category/w7itpro

• Why firefox 6 get too slow when navigating through about 15 sites open with coffee in the morning (add-on) not in firefox 5.0.1

  When I open about 15 sites in firefox 6.0 and 6.0.1 with Morning coffee add-on version 1.35 there not too slow to browse all the it takes about 30 min or more some time never load sites
  but when I do in firefox 5, 5.0.1, or 3. XX is the browsing speed is good and take about 2-3 minutes to completely cover each of them.
  I think that there is a problem with several tab navigation in firefox 6 or maybe a security that allows to slow to browse many sites.
  Help, please

  Firefox 8 solve this problem. !