Get system information

Similar Questions

• Tecra R840-109 - alert HDD - unable to get disk information

  I turned on my Toshiba Tecra R840-109 and everything looks that the factory settings have been restored, but I still have my files on the hard disk in the users folder (where the system has also built a temporary user I'm connected now, I guess).

  At the opening, the computer asked me to do the things you do when you get a new computer (for example accept the license, install browsers, register fingerprints, if applicable etc.). In addition, it showed an error, alert HDD/SDD saying "Could not get the information from the disk, cannot use the alert function".

  Is there a way to solve this problem, that is, to apply the previous (original) user?

  An obvious solution would probably be to restore the system, but I don't have a backup set to the top (which I will fix as soon as this problem will be solved). Tried to reboot, nothing has changed.

  Information on the mobile phone: http://www.toshiba.co.il/en/disconti...ecra-r840-109/

  Any help is appreciated!

  Hello

  To be honest situation described sounds pretty confusing and not logical for me.
  If you do not have recovery (DVD or USB) media create using preinstalled Toshiba recovery media creator tool.
  After this use this bootable media and reinstalling the recovery image so you will have 'presets' again. After the installation of clean operating system, it is not possible to have the old data stored on the HARD drive, not on the C partition.
  The fact is that before the installation of recovery begins any HARD drive will be deleted and formatted.

  Sorry if I got you. If you have any concrete and clear questions do not hesitate to ask.

• system information app is missing in el capitan

  "About this Mac" appears in the apple menu, but nothing happens when you click it. The application of the information system is not in the utility folder at all. Updated to El Capitan about a month previously and updated to version 10.11.3 today. How to get and install the application system information?

  Hey there dougamells,

  Welcome to Apple Support communities.

  From what I understand, there is a problem of location and launch of the application of the information system on your iMac. The article below provides troubleshooting tips that can help you to isolate and troubleshoot software on your Mac, and it will even browse reinstall OS X if necessary.

  Insulation in Mac OS X - Apple support questions

  See you soon.

• Running game - this version of the file is not compatible with the version of Windows you are using. Check your computer's system information to see whether you need a x 86 (32 bit) or an x 64 (64-bit) version of the program

  I'm having the same problem that is described in this topic: http://social.answers.microsoft.com/Forums/en-US/vistagaming/thread/f15edea1-f88f-492e-bb42-4db2b06fdf05

  My error message is: "this version of the file is not compatible with the version of Windows you are using. Check your computer's system information to see whether you need a x 86 (32 bit) or an x 64 (64-bit) version of the program and then contact the software publisher. »

  I tried to run the program in question (Castle of the winds) in each mode of compatibility that is on the list and it is giving me this error message every time. Other people have managed to get the program to work, so I don't know, it does not work on Windows 7, but I can't make it work for me.

  Help?

  Hi autohaptic,

  (a) on the computer what Edition\Version of Windows 7 operating system do you use? What type of system? 32-bit or 64-bit

  If you are running Windows 7 64-bit operating system, you can install the 64-bit computer game program.

  (b) on the computer which the castle of the winds game version are you running?

  I want to clarify, if you try to install the program or trying to run.

  Step 1: Put the computer in a clean boot, and then try to run the game

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  You can consider the right version of the game for your computer relocation program.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• What is the command of shortcut for all windows get the information from the computer?

  What is the command of shortcut for all windows get the information from the computer?

  instead of going to the computer / my computer > properties > discover the pc... basic information or go to the control panel...

  just a command for windows xp, vista, 7 for system looking for information....

  original title: what is the SHORTCUT COMMAND to get information from the computer system?

  Hello BlackSecret,

  The keyboard shortcut to get to the top of this information is Windows key + break Attn.
  
  
  Who does what you ask?

• I get system off with the code 68072590 after 3 failed attempts

  I get system off with the code 68072590 after 3 failed attempts

  AM trying.

  77950516

  Use this code to go into the BIOS.

  Disable all passwords that are enabled.

  IF demand for CURRENT password using this code.

  REQUEST NEW password just press ENTER.

  If asked to hit just to CHECK password to enter.

  Save and exit.

  REO

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

• I installed 4 GB of RAM in my computer Windows XP which has detected correctly 4096 MB, but the system information that 2 GB of Ram available.

  I recently installed a maximum of 4 GB of RAM for my Win XP Home computer: four tips of 1024Mo in 4 available memory locations. Story: It came with 512 MB of RAM (256 MB two cards to 2 of the 4 slots). I sometimes treat files large image or video in a few applications, and if I do too much without saving the files, I get something like "...". not enough memory to complete... "and can not save either and lose an hour or two of work, all frozen, treatment and once had to turn off the computer by pulling the power plug (nothing else worked). Later, I added two boards of 1024 MB and moved the two 256 MB for the other two locations. The computer has detected correctly the RAM and showed 2,560.00 of available physical memory total MB of RAM in system information and available physical memory 2.00 GB (currently about 550 MB, current process). I put 4 GB page file. That helped a lot with the processing of these applications, but if do not attention, the same "...". not enough memory... "thing and I lost the job. So I added another 2 identical cards of 1 GB replacing the two planks of 256 MB. The 4 GB of RAM, I've added exact IS correct type for my computer. Set the pagefile to 1.5 times RAM available, etc, so that's it of OK. NOW THE PROBLEM, if it'S a PROBLEM: in the information system RAM is detected OK, showing 4,096.00 MB total physical memory, BUT not much more available memory: 2.16 GB available physical memory! Total virtual memory 2.00 GB remains the same in both cases, even if I put the pagefile of 12 GB. Page file space shows what I put in more added about 2 GB.
  SO THE QUESTION: Is all the 4 GB of RAM (essentially) available for use with my operations high megabytes to image and video processing applications?  Or is Win XP steal my RAM and makes the page file? What happens here? You wish to know if I've lost $120,00 on two more strips of 1 GB of memory. Thanks loads, if someone can tell me.
  Did not have a pretty good test in image/video applications to find out if I won anything yet. Always the same 550MO ongoing process. And Yes, I spent hours on the things in forums of online learning on the page file and RAM, most of which I knew already, but there is no explanation on the information system does not more than 2 GB of RAM available.
  Thanks loads, if someone can tell me.

  "My OS is Windows XP family 32-bit." End of the story for the possibility to use up to 4 GB of RAM. No, there is no way to magic, you can force a Windows 32-bit operating system to use all 4 GB of RAM. There is a difference between the question of whether a motherboard will support a certain amount of memory and an operating system be able to access memory. Sorry, you missed this fact in your research. Oh, and if you want to try one of the many Linux distros do not forget to use a 64-bit - after checking your processor is 64-bit also. That yours is not.
  MS - MVP - Elephant Boy computers - don't panic!

• Cannot run 'system information '.

  For some time now, I used "System information" to view the details of my office (ongoing running XP Pro SP #3 and all updates).  For more convenience, I placed a shortcut on my desktop.  Recently it has stopped working and I get a message: "Windows cannot open help and Support because a system service is not ongoing.  «To resolve this problem, start the service named «help and Support»»

  When I click Start and then click Help and Support, I get an error message: "windows cannot find helpctr.exe.

  What I'm missing here?

  Do you mean you see a message like this:

  Windows cannot open "helpctr.exe".  Make sure you typed the name correctly and then try again.  To search for a file, click the Start button, and then click search.

  Or something like this:

  Windows cannot open help and Support because a system service is not ongoing enforcement.
  To resolve this problem, start the service named 'help and Support '.

  Help and Support sometimes gets broken up with overzealous cleaning and there are a lot of things to 'try' who sometimes work and sometimes they are not. Sometimes people drop everything simply and never reuse Help and Support Center, but it can still be repaired.

  You have now or have you ever used third-party applications on your system where the product description includes descriptive as sentences:

  cleaner, mechanic, detective, doctor, heal, optimize, Inspector, clean, tune up, speed up, fix up, compact, compress, faster, power, boost, boost, gum, muncher. one-click fix, new, intuitive, errors, stop crashes, stop errors, improves, saving you money, risk free, guaranteed or any third-party program that has an icon that looks like a gear, pinion, belt holders, key, screwdriver or plunging arrows?

  We will restore some things in the registry who sometimes kill himself by malicious software or, sometimes, these cleaning programs.

  Before making any changes to your registry (although I hope that this update), manually create a Restore Point, and then make a copy of your registry with this free and popular tool:

  http://www.SnapFiles.com/get/ERUNT.html

  Then go to this page WWW of Riou (thanks, Ramesh).

  http://WindowsXP.MVPs.org/startmenuhelp.htm

  When you click the file startmenuhelp.reg on this page with your browser, you will see a bunch of text which is information of record that you want to apply to your system.  It seems daunting, but it's not so bad.

  Press Ctrl + A to select all the text, then press Ctrl-C to copy the text to the Windows Clipboard.

  Click Start, run, and then in the box, type:

  notebook

  Click OK to open a new Notepad file.

  Press Ctrl + V to paste the information that you copied into the Windows Clipboard in the Notepad file.  Save the new file in Notepad on your desktop and name the new file something he can hold, as:

  startmenuhelp.reg

  Quit Notepad and double click the file startmenuhelp.reg on your desktop and respond in the affirmative to the question about adding information to your registry.

  Test your help and your support now, then restart and test again to make sure that the changes 'stick' with a reboot.

  You can delete the file startmenuhelp.reg to your desktop.

  If that does not do it, we just reinstalled the whole shebang (just the help) and Support.

• I am getting system error 25004 and 1073422306 when I try to download trial versions

  I am getting system error 25004 and 1073422306 when I try to download trial versions

  Hello

  1. do you get this error trying to download or anything when trying to install the trial software?
  2. what software in trial version you are trying to download?
  3. What is the exact error message?
  4. what browser do you use?

  Your question does contain all the required information necessary for us to help you. Please re - write your question, this time make sure you have all the information necessary and we will try to help.
  How to ask a question
  http://support.Microsoft.com/kb/555375

• "This version of this file is not compatible with the version of Windows you are using. Check your computer's system information to see if you need a x 86 (32 bit) or x 64 (64-bit) version of the program.

  Hello

  I seem to be having problems when you try to install a program on my Windows 7 that allows to launch on my Windows XP and Windows Vista. I used the tool to solve compatibility problems and selected these settings in the CONFIGURATION file, but nothing seems to work the error message I get is as follows:

  "This version of this file is not compatible with the version of Windows you are using. Check your computer's system information to see if you need a x 86 (32 bit) or x 64 (64-bit) version of the program, and then contact the software publisher. »

  Is it possible to set my computer to allow this program to run successfully? Any solution would be greatly useful.

  Hello Rdforbe,

  The problem is a software that was created for Windows 95, 98, and Windows XP has no way to work correctly with an operating system that didn't even exist when the software was written. However, the error message you get normally means that you have a 32-bit software that you are trying to install on a 64-bit system.

  To find out if your computer is running 32-bit Windows or 64-bit, follow these steps:
  System opened by clicking on the button start , by clicking on the Control Panel, click System.
  Under system, you can view the system type. This will describe if you have 32-bit or 64-bit.

  You can also try compatibility mode.

  If the program is not compatible, then you try to install and run the program in compatibility mode.

  Use the following steps:

  (1) right click on the program

  2) click Properties

  3) click on the Compatibility tab

  (4) select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.

  Check out the link here: make sure to run older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  If you are running Windows 7 Professional or Ultimate version, install Windows Virtual PC and Windows XP mode (http://www.microsoft.com/windows/virtual-pc/default.aspx) and run your software in Windows XP.

  If you run Windows 7 Home Premium, try VirtualBox (www.virtualbox.org) or VMware Player (www.vmware.com), or any other software virtualization part 3^rd and install a separate copy of Windows XP (family or professional edition) for this purpose. You can find the virtualization software free that will run on Windows 7 Home Premium.

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How to get more information about the user using SecurityContext ADF?

  Hello.

  In my application I have a table use:

  CREATE TABLE ("ADM_USERS"

  ACTIVATE THE 'ID' NUMBER(*,0) NOT NULL,

  ACTIVATE THE 'U_NAME' VARCHAR2 (30 BYTE) NOT NULL,

  ACTIVATE THE "U_PASS" VARCHAR2 (255 BYTE) NOT NULL,

  VARCHAR2 (30 BYTE) "NAME."

  VARCHAR2 (30 BYTE) 'NAME')

  I configured the WebLogic environment using the the "reading- SQL only the authentication provider ' and then I configured ADF Security as ADF authentication -> Forms -authentication.

  I connect the user using the method of ""doLogin " and all that working properly. "

  
  

  public String doLogin() {}

  String _username =;

  Byte [] pw = _password.getBytes ();

  FacesContext fctx = FacesContext.getCurrentInstance ();

  HttpServletRequest request = (HttpServletRequest) () .getRequest () fctx.getExternalContext;

  try {}

  Topic topic = Authentication.login (new URLCallbackHandler (UN, pw));

  ServletAuthentication.runAs (object, request);

  String loginUrl = "/ adfAuthentication?success_url=/faces/Registry.jsf";

  HttpServletResponse response = (HttpServletResponse) fctx.getExternalContext (m:System.NET.FtpWebRequest.GetResponse ());

  sendForward (request, response, loginUrl);

  } catch (FailedLoginException fle) {}

  FacesMessage msg = new FacesMessage (FacesMessage.SEVERITY_ERROR, "Incorrect name or password","Incorrect name or password" "");

  fctx.addMessage (null, msg);

  } catch {} (the LoginException)

  reportUnexpectedLoginError ("LoginException", the);

  }

  Returns a null value.

  }
  

  securityContext.userName returns the value of the 'U_NAME '.

  How to make more information on the user connected such as NAME, ID, first NAME?

  
  

  And the second question:

  How to store the value of the field 'ID' in table 'ADM_USERS' in any table with the 'IDUSER' with objects of entity created in application scope?

  
  

  Concerning

  Darek
  

  
  

  securityContext.userName returns the value of the 'U_NAME '.
  How can I get more information about the user logged as NAME, first NAME, ID?

  You can not.

  You need to query DB.

  How to store the value of the field 'ID' in table 'ADM_USERS' in any table with the 'IDUSER' with objects of entity created in application scope?

  Record this value in UserData structure so it will be available in the model. http://andrejusb.blogspot.com/2012/05/solution-for-sharing-global-user-data.html

  Then use as default expression for your objects of entity attributes (something like: adf.userSession.userData.yourUserDataVar).

  Dario

• How can I use the REST API to get general information of the user (Signature fields)?

  I'm trying to use the API to get the signature of all the users of the system fields. I can see this information in the web browser if I go to settings-> user management-> and selecting the user.

  I would like to know if there is a way to get the information General information (Signature fields) using the API.

  Thank you!

  Hi Sai,

  The REST API exposes the user records (see the following document); However, signature fields are not included. We need to work on this addition to the API (in a later version), but the option is currently not available.

  Please let me know if you have any questions or would like more information.

  Thank you

  Fred

• Portege R700: HDD/SSD Alert "cannot get disk information.

  The Toshiba HDD/SSD Alert keeps popping up on my Portege R700. It gives the message "failed to get disk information, cannot use the alert function.

  The OS is Windows 7 32 bit. Everything else works well.

  I tried uninstalling and reinstalling the HDD/SSD Alert cmdlet and the Intel Rapid Storage driver, but none of the measures have worked.

  Someone at - it ideas?

  Thank you

  Try this:

  Remove the application HDD/SSD Alert Control Panel-> programs and features
  Remove the Toshiba Value added Package Panel-> programs and features application
  Reset
  Download and install the latest Package of added value on the Toshiba site
  Download and install the latest HDD/SSD Alert on the Toshiba site

  Otherwise, it would be possible that the problem is related to the HARD drive maybe that alert the program HARD drive cannot read the info of the disk due to HARD drive hardware problem.

• Get 7 Volume Info.vi returns an error when you try to get the information from disk on the cRIO-9025

  Hello

  I use a cRIO-9025 controller and want to get the information from the c: disk volume using the function to read the Volume information in the palette file I/O. When I run the function with the path as "C:\". ", the function returns a 7 error indicating that the path is incorrect.

  I used this function before with cRIO but unfortunately I have not any older devices with me to check this out now. I'm using LabVIEW 2009 SP1.

  Thank you very much!

  See you soon!

  Sankah2k

  On real-time targets VxWorks, the root of the path of the file is here (in lowercase). Try and let us know if it works. You would be better to use the constant path of the file to understand what looks like the path of the root directory.

• Pavilion g4: startup stops at UEFI "System information" screen

  I'm working on Pavilion laptop g4 a friend for which he asked me to do a fresh install of Win7 Home Premium.

  This is my first experience with the new EFI "bios" and it turns quite a steep learning curve!

  I am at a loss to understand why every attempt to restart stops on the "system information" screen (rather than new startup in Windows):

  

  I was able to successfully install Windows, but each causes to restart the sequence to stop at this same screen which makes it useless (for example) to perform a session support with a boot like TeamViewer tool that requires the computer to boot into Windows without supervision.

  I spent more than a week of research on this issue and have not found someone with a similar experience. Therefore, I hope that someone here can help provide the solution.

  If several sreen hats are needed, feel free to ask.

  Thanks in advance!

  It's unfortunate... I expected that someone would have solid information to provide that at least I pointed in a direction that I could continue my investigation.

  I don't care... I come back my friend g4 Pavilion this weekend since I was hanging on it hoping that I would be able to resolve the startup problem before doing so.

  So I'm marking THIS "resolved."