Get the error Code: 0xc000000d and your PC needs to be repaired.

Similar Questions

• Windows Vista Service Pack 2 (KB948465) I get the error code 80092004 and it was not able to load.

  Windows Vista Service Pack 2 (KB948465) I get the error code 80092004 and it was not able to load.

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I'm trying to download the updates to my computer, but can't. I get the error code 646 and the download fails. I tried to download the update several times, but get the same answer. What is the problem?

  Ideas: I'm trying to download the updates to my computer, but can't. I get the error code 646 and the download fails. I tried to download the update several times, but get the same answer. What is the problem?

  • Pragrams you have problems with
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Try to install the fix it and get the error code 2503 and 2502

  Try to install the printer and fix this program. Get error 2503 and 2502 codes.

  Hello

  · What is the number and model of the printer you are trying to install?

  · Who solve this are you referring to?

  · You receive an error message with the error code?

  Delete the temporary files and folders on the computer and check if it helps. You can follow the procedure:

  a. click on start

  b. click on run

  (c) in the Open box type %temp%

  d. remove all files and folders in the location.

• I can't get my computer up to date. I get the error code 8007010B and the 643 error code.

  Because my computer did an update, it's be about 2 months or more. He has like 12 updates to do and everytime I try to update, 8007010b error code comes up. I tried to do the thing of .NET Framework, because I have read a few replies and they said that I had to delete and downloaded again because that was supposed to give me the problem. It wasn't her, I already deleted my .NET framework and got a new. I downloaded like 3 different version because it is said the response that I have to do. It did not work. Help, please! what the heck is 8007010b! Help!

  is there another way to solve my problem update?... I might as well just upg thdate my computer to windows 7 if I don't want to reinstall stuff. Who would fix the problem?

  No, the only way to solve your problem is to format your hard drive and do a 'clean' of Windows installation.

  No, go to Win7 will not correct this problem.

  Because you will need to format the disk in any way, you can buy a copy of Win7 Full edition (not updated one or level upgrade Express edition) and install Win7 it. Full Win7 Edition will cost around US $100 more than Win7 Upgrade edition or an Anytime Upgrade to Win7.

  You have yourself to blame: have you uninstalled McAfee free trial until it has expired and then download / run the McAfee Consumer products removal tool before installing the freebie from Comcast, you wouldn't be in this situation. Bet let you yet once, never happen there?

  Wish I had better news for you. In & out.

• Get the error code 0x80070426 and a black screen when recording in Windows Vista

  Original title: Error Code 0x80070426? __

  I have tried to connect with windows vista but had a black screen with the box in the middle that says error code 0x80070426

  Hi henry90909,

  See the instructions below thanks Darin Smith MS:

  If you do not have access to the Start button:

  1) click computer access with reduced functionality

  (2) a browser will open, type:%windir%\system32 in the address field

  (3) find the cmd.exe file

  (4) make a right click on the cmd.exe and select run as administrator

  (5) type: net start slsvc

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I get the error code 204 and cannot install the creative cloud. Need help!

  Currently, I'm trying to install the creative cloud but error: 204 keeps popping up stating «It seems to be a problem of access to a critical file for download...» »

  Can someone help me?

  Thank you

  For this a little late but I just had this problem and it was my malware program which was causing the problem. Just turn it off and it works perfectly.

• Setup KB967044 error; I get the error code 646 in automatic and manual update update fails so

  I tried to install KB967044 for Microsoft Works 9. Like others, I get the error code 646 for the automatic update. I tried to manually install, but installation requires the CD of Microsoft Works. Now, Works has been installed at the factory, and I do not think that the CD that came with the computer. In any case, I was unable to find such a CD. Disable my firewall has not changed the problem. I use Vista.
  Thank you for your help.

  Contact the manufacturer of your PC to get the drives concerned etc..

  If the update requires the CD and then the CD. TaurArian [MVP] 2005-2010 - Update Services

• I try to install the update of security for Microsoft Office System 2007 (KB972581), but if failed and I get the error code Code 57A__

  I try to install the update of security for Microsoft Office System 2007 (KB972581), but if failed and I get the error code Code 57A

  I have install the 2007 Microsoft Office Suite Service Pack 2

  I bet that if you check the size of the file that has been downloaded it will be probably very small, indicating that it was not downloaded correctly.

  I don't think you have another computer at hand, or a friend with a USB key which may be able to download and copy it for you?  Maybe burn it to a CD or something.

  I could download it and save it to my desktop so I am confident that it is not a problem with the link itself or the file is available for download with success.

  I know this isn't a very good suggestion, but the only other option would be to challenge support and see if a technician can take control of your machine and see if they can solve the problem of internet explore.

  If you find my answer was what you're looking for, remember to click on the box "mark as answer" below!

• Vista home prem (KB967723) sp2 security update does not install and get the error code 80073712

  I tried to fire disableing walls, with work, I get all the way to installation and the i get the error code 80073712

  http://support.Microsoft.com/kb/957310

  «Error message when you try to install updates on the Microsoft Update or Windows Update Web site: "0 x 80073712" "»

  Method 1: Run (Checksur.exe) system update readiness tool

  1. Download and run the system update readiness tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations.

     For more information about how to download and run the Checksur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base:

     947821 (http://support.microsoft.com/kb/947821/) Description of the update readiness tool for Windows Vista system
  2. Try to install updates again.

  Note After running the tool, the Checksur.log file is stored in the following location:

  %SystemRoot%\Logs\CBS

  In a default installation of Windows Vista, is the Windows directory.

  If this method does not resolve the problem, go to method 2.

  Back to top

  Method 2: Install Windows Vista Service Pack 1 if you have not yet installed Windows Vista Service Pack 1 (SP1), visit the Microsoft Download Center and then download and install Service Pack 1. To do this, follow these steps:

  1. Quit all programs, and then click on the following link:
     http://www.Microsoft.com/downloads/details.aspx?FamilyId=f559842a-9c9b-4579-b64a-09146a0ba746&displaylang=en (http://www.microsoft.com/downloads/details.aspx?FamilyID=f559842a-9c9b-4579-b64a-09146a0ba746&DisplayLang=en)

     Note Click the option to download on the download page, click Save, and then save the download to your desktop. When the download process is complete, click run to install the SP1.

  2. Restart the computer.
  3. Try to download the updates again.

  If you can't always install updates, go to method 3.

  Back to top

  Method 3: Perform a repair of Windows Vista installation when you perform a repair installation, which restores the current installation of Windows Vista to the version on the installation DVD. This requires you to reinstall all updates that do not appear in this version of Windows Vista.

  To perform a repair of Windows Vista installation, follow these steps:

  1. Restart the computer.
  2. Insert the Windows Vista DVD into the DVD drive of the computer.

     Note If Windows does not automatically detect the DVD, click on Start, type: \setup.exe in the Search box, and then click configuration in the list programs. Then, click install now.

  3. Click connect to get the latest updates for installation (recommended).
  4. Insert the product key if you are prompted to do so.
  5. Click to accept the Microsoft software license agreement.
  6. On the screen which type of installation you want , click upgrade.
  7. Once the installation is complete, restart the computer, and then try again to install updates.

  See you soon.

  Mick Murphy - Microsoft partner

• I can't sign into windows live messenger, I get the message that windows live messnger is unavailable currently try again later and also I get the error code 80048820, can someone help me solve this problem. __

  I can't sign into windows live messenger, I get the message that windows live messnger is unavailable currently try again later and also I get the error code 80048820, can someone help me solve this problem.

  Hello jabeena, welcome.

  This section would apply in fact to the Windows Live programs, but we'll see what we can do to help out you.

  I recommend to try this first:

  1. disable any antivirus software or security, you have running on your computer. Looking for software to disable that contains a firewall.

  2. click on START
  3. Type "cmd" (without the quotes). Right-click on the result at the top of the menu START and select 'run as administrator '.
  4 type the following and press enter

  Regsvr32 softpub.dll wintrust.dll initpki.dll

  5. then type the following command and press enter

  netsh winsock reset

  6. restart your computer and see what happens.

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• KB2656374 update failed to install and get the error code 80070020

  Try to install update KB2656374 and get the error code 80070020. How can I fix this please?

  Hello

  1. who is the antivirus installed on the computer program?

  2 have you made any changes to the computer before the show?

   
   

  Perform the steps described in the article:

  You receive error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install the updates

  http://support.Microsoft.com/kb/883825

   
  WARNING: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
   

  I hope this helps.

• Problem with DVD player and get the error code 19 Device Manager

  Original title: TSSTcorp CDDVDW SH - 224DB ATA device

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  How to fix it please Message Please please how to fix it

  Hi Emerald,

  Please contact Microsoft Community. I understand that you have a problem with the CD\DVD drive and get the error code 19 Device Manager. I've surely you will help solve this problem.

  To better understand the issue, I would like to know if you have any recent software or hardware on the computer changes before this problem?

  This problem might have occurred because of these reasons:

  1. Install or uninstall the CD or DVD recording programs.
  2. Uninstall Microsoft Digital Image.

  Try the steps listed here and see if it helps:

  I suggest you try the procedure described in article which will correct corrupted registry entries. Check if it helps.

  Your CD-ROM or DVD drive is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/314060/en-us

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information on how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• I get the error code message please connect firewall and protection antivirus please help

  I get the error code message please connect to the internet to validate your serial number, but I'm connected to the internet, I have disabled firewall and virus protection please help

  Please read https://forums.adobe.com/thread/1499014

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  -check the file hosts for blocked entries https://forums.adobe.com/thread/1912777

  http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.

  https://helpx.Adobe.com/creative-cloud/KB/creative-cloud-desktop-application-failed.html

  http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html

• I tried to install Windows Vista SP1 since July without success. I stopped trying in October but just tried it once more and I get the error code 8024200d message when it fails to install.

  I tried to install Windows Vista SP1 since July without success. I stopped trying in October but just tried it once more and I get the error code 8024200d message when it fails to install.

  See this previous thread on the problem: http://www.google.com/search?hl=en&safe=off&rls=com.microsoft: en - US & q = + site: social.technet.microsoft.com + 8024200d & ei = hkchS4O6M9HolAfh8viLCg & a = X & oi = forum_cluster & resnum = 1 & ct = more results, & ved = 0CA0QrQIwAA

  Unlimited installation and compatibility for Vista SP1 support is available free of charge from April 2008, through June 30, 2009.  This support now will cost $59 us $ (or more) per incident.

  Good luck!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft