The requested operation is not implemented by the server when you try to access the VI Client with ESX hosts

Similar Questions

• Unable to connect to the main DNS server when you try to access the internet

  Computer has worked fine for the year last until 2 weeks ago and now unable to connect to the internet.

  Windows Vista on broadband and services connected directly to the modem by ethernet.  Provider Internet has run tests and confirmed modem is fine and it's like my laptop runs very well on it.

  Re-initialization of the modem, internet works and you can type in a few places and it seems OK, but you can't do anything on a site, it is, enter the details and even if you try and enter anything, you can usually view 2 sites and then it goes again.  However, the network icon shows that on and connected to the internet.

  The diagnosis, it is said that he cannot access the primary DNS server.

  Do you have any idea how I can fix this or should I just completely re - install windows from the original disk set?

  A few things you can try...  [This will be the Windows to try to automatically fix your connection]

  Open 'Network and sharing Center' (you can search for it in the Vista Start menu)

  Under tasks, click on "diagnose and repair".

  If this fails, you can try...  [This will use the NETSHell utility to RESET your network interface (removes all static configurations and sets DHCP)]

  Open a command prompt (you can also search for it on the start menu in Vista, if you have this OPTION enabled, you need to start as administrator)
  The type of command line: NETSH INTERFACE IP RESET. JOURNAL

  If you still have problems, try to post your IPCONFIG/all, file HOSTS and ROUTE PRINT on this forum.

  How to:

  IPCONFIG/ALL
  Open the command prompt and type: IPCONFIG/all
  To save the output to a file simply type at the command prompt: IPCONFIG/all > filename.txt

  Your HOSTS file is located in the following path (the HOSTS file does not have an extension, it is simply named "HOSTS"):
  %windir%\system32\drivers\etc\HOSTS
  or
  C:\Windows\System32\Drivers\ETC\HOSTS

  ROUTE PRINT
  Open the command prompt and type: ROUTE PRINT
  To save the output to a file simply type at the command prompt: ROUTE PRINT > filename.txt

  PS: If it becomes really hairy, you can provide NETSH DUMP (this provides virtually all network configurations)... You certainly shouldn't need to re - install Windows.  There is probably a setting of network configuration problem that causes this problem.  Good luck!

  -Rob

• When you try to add a network route with the "route add" command in the command line, I get the message "the requested operation requires a rise."

  Elevation required to route add command

  When you try to add a network route with the "route add" command in the command line, I get the message "the requested operation requires a rise."  What is the correct syntax to use?

  You can watch using the PowerShell...

  http://TechNet.Microsoft.com/en-us/library/bb978526.aspx

  http://TechNet.Microsoft.com/en-us/scriptcenter/dd742419.aspx

  .. .and post questions about Windows PowerShell forum...

  http://social.technet.Microsoft.com/forums/en/winserverpowershell/threads

• Request password to the login screen when you try to access Outlook Express. He has never done this before.

  Request password to the login screen when you try to access Outlook Express. It appeared suddenly.
  (I recently bought phone and set up by my family could have invited)
  In any case-"main identity is the identity alone on the login screen. I need password to manage identities. Can I by pass? This means a first time trip into the bowels of the registry? or I can avoid this.

  original title: express outlook for connection screen password
  Then we will try this password to logon OE.
   
  Outlook Express keeps to request your password
  http://www.dougknox.com/XP/Tips/xp_oe_passwords.htm
   
  Save the password setting will no longer exist in Outlook or Outlook Express
  http://support.Microsoft.com/kb/290684 

• Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates

  I got an error message in step 2 of configuring updates - "updates were not correctly configured.  Returning from changes' anyone can help solve this problem?

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
  http://support.Microsoft.com/kb/949358

• Why the CC lightroom does not recognize my users folder when you try to import?  I can not imaport images in the program.  It has worked well in the past

  Why the CC lightroom does not recognize my users folder when you try to import?  I can not imaport images in the program.  It has worked well in the past

  It is an Apple problem. They obviously fixed with a change to iTunes. Download the update on their part.

  HAL

• internet access - I always get 'pending on the cache' when you try to access the Internet

  Why do I always get 'pending on the cache' when you try to access the internet

  Hi reneamayo,

  1 Windows operating system you are using?

  2. what browser do you use?

  3. If you are using Internet explorer, what version of IE are you using?

  4. When did you start to question?

  If you use IE, then you can try to run the Fixit mentioned in the link below and check:

  Improve performance and security in Internet Explorer

  http://support.Microsoft.com/mats/ie_performance_and_safety/

  You can also check out the following link and try the steps:

  How to remove the contents of the temporary Internet files folder

  http://support.Microsoft.com/kb/260897

  Hope this information is useful.

• Windows asks for a password when you try to access to the "view work group computers."

  We are on a network.  Main computer, that we can access through the receptionist connect you and access shared files on this computer.  Computer from the receptionist, windows asks for a password when you try to access to the "view work group computers."  We tried to use its password.  However, the shared files are still not accessible.

  Hello

  1. what happens when you enter the password?

  2. how many computers are connected to this working group?

  Refer to this link and check: You cannot access shared files and folders or browse computers in the workgroup with Windows XP

  http://support.Microsoft.com/kb/318030

  I hope this helps!

• After updating windows 7 Edition family premium my phone regularly crashes when you try to access the folder

  After updating windows 7 Edition family premium my phone breaks down regularly when you try to access the folder - I installed several updates, correct its and also removed countless system software - can someone help please!  It normally occurs when you access my folder music or documents, even if they are empty! I'm using an asus laptop

  There is no free or paid for the software will fix PC problems

  'used cmd & scan' could mean allmost anything.

  Apparently, you have a portable computer, you do not have scource drivers for a laptop computer via windows update (unless this portable machine said) but this laptop manufacturers support site, then visit this site of support of decision makers and reinstall all the drivers available.

• "documents.library - ms" is no longer work error message displayed when you try to access files via the file browser, why?

  I bought a computer window 8 in February of this year.  I use a lot of Word and Excel documents.  I don't know how I got hurt, but now I get the above error message.  Please someone know how to fix this?

  Hello

  I understand that you are getting the error documents. Library-ms' no longer works, when you try to access the files in the file Explorer.

  You can try the following method and check if that helps resolve the issue.

  Method 1: delete the document library.

  a. press the Windows key + E from the start screen.

  b. click on document library.

  c. Select Remove.

  d. click on Yes when it asks confirmation.

  Note: deleting of a library does not delete the contents of the included folders. However, you need to add or include your folders manually, if necessary.

  Method 2: you can follow the procedure to restore libraries.

  a. press the Windows key + E.

  b. right-click on the library.

  c. click on restore default library.

  You can check the link for more information.

  Libraries: Frequently asked questions

  http://Windows.Microsoft.com/en-in/Windows-8/libraries-FAQ

  Libraries: How to add or delete a folder

  http://Windows.Microsoft.com/en-in/Windows-8/Add-folders-library

  If please get back to us and let us know if this helps to resolve the issue.

• I have the following error message when you try to access the settings preferences "load library failed with error 1114: (DLL) initialization routine failed. I use Windows OS 10. Can anyone help?

  I have the following error message when you try to access the settings preferences "load library failed with error 1114: (DLL) initialization routine failed. I use Windows OS 10. Can anyone help?

  HI lifeimagecreations

  Greetings!

  Please see this thread in the lightroom preferences entry CC2015 crashes with LoadLibrary failed with error 1114

  If this does not work, reinstall the program with administrative rights.

  Let us know if this helps

  Concerning

  ~ Assani

• Just recently, I receive the following error message when you try to access the web sites. I get a pop-up window indicating "Exc in ev handl: TypeError: c.location is null" then I have to click ok. There is a problem with some plugin?

  Just recently, I receive the following error message when you try to access the web sites. I use Firefox browser version 10.0.2. I get a pop-up window indicating "Exc in ev handl: TypeError: c.location is null" as the web site page is displayed in the browser winder. So, I have to click ok. Any link/website I go to what happens. There is a problem with some plugin?

  It is only a problem for the SiteAdvisor users who are still on 3.4. This problem is resolved in the latest version of SiteAdvisor, which is 3.4.1.195. Go to http://siteadvisor.com and click on download. This will fix the problem.

  Meanwhile, SiteAdvisor team will push down a JS update in the coming days 1-2 to automatically resolve this problem in version 3.4.

• The server responds, "Forbidden" when you try to access email account through Outlook.

  The server responds, "Forbidden" when you try to access email account through Outlook.
  All e-mail messages are old (latest is July 2009). What can I sinc Outlook with e-mail account current?

  Outlook:

   

  http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx

  Office newsgroups

  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Outlook.General&lang=en&CR=us

  Discussions of general issues of Outlook.

  They will help you with your Outlook questions when repost you in the Office discussion groups above.

  See you soon.

  Mick Murphy - Microsoft partner

• Error when you try to access my library in CC saying "unable to connect to the server.

  I get an error when you try to access my library in CC saying "unable to connect to the server" - is there a solution? I can view them on the web app, but can't access it when I open Adobe Illustrator or other Adobe programs. Help, please! The error appears when I hover over the icon to the left of the trash.

  

  Hello

  Please, try the following steps:

  • Close all applications CC
  • Complete the process monitor activity/task manager (CCLibrary).
  • Restart any application and check.

  Hope that helps!

  Kind regards

  Sheena

• When you try to access a service of my browser, I get a message saying that I can't because my default mail client is not properly installed

  When you try to access a service of my browser, I get a message saying that I can't because my default mail client is not properly installed, but it doesn't tell me what I'm supposed to do either. So... What am I supposed to do?

  Go to control panel | Default programs and set your default email program, if you have a.  If you use the webmail, you probably can't set.

  Steve