Get the right battery

Similar Questions

• Where can I get the right drivers for Satellite Z930 - PT23LA - 01 009?

  A little history: I recently bought a version of Win7 to a Z930 in Auckland from PB Tech shop. I've updated to a clean version of Win8 64-bit. My Win8 seems works ok but I noticed something strange in the Toshiba PC Health Monitor - apparently the Toshiba HDD/SSD Alert is not installed, so I don't understand not his iconic display in the health monitor (but the health monitor think my SSD is in "Good" shape - maybe it's reading the INTELLIGENT of my SSD interface, or maybe it's just saying 'Good' because the integrity monitor is apparently able to operate?)

  I can easily find different versions of the Toshiba HDD/SSD Alert Utility in questionable Web sites - download, but I really prefer to get my Toshiba support drivers. Which leads to my question:

  Where can I get the right drivers for PT23LA-01 009? NZ nor the webarea to Toshiba support have this model in their menus. The closest match seems to be

  http://www.MyToshiba.co.nz/support/computers/Ultrabook/satellite-z930/pt23la-01f00n/download?OS=30

  There is probably not much difference between a PT23LA-01F and a PT23LA-01 P but it is a bit of concern to be download & install the drivers for a chip that is no my model...

  See you soon,.
  Clark

  PS: http://forums.toshiba.com/t5/General-Features-Knowledge-Base/TOSHIBA-HDD-SSD-Alert/ta-p/347120 advise me the area downloads for Toshiba support. He also advises "not all utilities are available for each model and operating system. During the installation of utilities, install the TOSHIBA value added first. "Sigh... so maybe my problem is that I installed the Win8 drivers & utilities order when build my own-building a Win8 pass win7? Wouldn't surprise me in the slightest... but if this is the case are here all other dependencies in these built?

  > Where can I get the right drivers for PT23LA-01 009?

  First series of Toshiba laptops (Australian, European, etc) is very similar to the other
  Your model of laptop Australian Satellite Z930 * PT23LA * series is the same as the European model Satellite Z930 * PT23LE * series.

  That's why the drivers, tools and utilities published for Satellite Z930 * PT23LE * series must be compatible with the Satellite Z930 * PT23LA * series.

  To get all drivers for Satellite Z930 * PT23LE *, you should check this page:
  http://www.Toshiba.EU/innovation/download_drivers_bios.jsp?service=EU

  There, you can get all win 8 - upgrade the drivers. Also the HDD/SSD Alert Utility v3.1.64.14

  Welcome them

• Qosmio-F750-10N and Win8.1 - were not able to get the right BT drivers

  Hello

  Since upgrading my HARD drive and installing Windows 8 (.1), I was not able to get the right drivers for my Qosmio F750-10N Bluetooth.

  If I go through the section of drivers download site, the drop-down boxes of language and the region appear to be defective, so it shows me all the drivers.

  Tried to install a Toshiba Bluetooth stack generic but it doesn't seem to be able to recognize my Bluetooth device. Also tried to go through the Atheros website without much luck.

  Please could someone help or maybe post a link to a download mirror.

  Thank you very much.

  Hello

  First of all, it seems that the 8.1 win is not supported for Qosmio F750.
  So I might be difficult to operate BT

  However, AFAIK the Qosmio F750-10N was equipped with an Atheros AR9285 Wifi/BT card.

  This means that a single module shares the WiFi network and BT and you need to install the Atheros BT filter driver.
  Next to the BT filter installed, must install the driver of Toshiba system to win 8.1
  The pilot of this system must be installed before the filter of BT driver.

  But like I said: 8.1 win is not supported for this Qosmio unit and you won't find drivers Win 8.1 download section in the driver F750.

  But you should try the drivers released for the other, more recent Qosmio series; i.e. X 870

  Good luck

• My HP Photosmart 7660 printer does not work with Win 7 Ultimate. Need help, where can I get the right driver?

  My HP Photosmart 7660 printer does not work with Win 7 Ultimate. Need help, where can I get the right driver?

  Visit the HP website and look.

• The response of the mouse becomes slow and I get the low battery warning

  Original title: Use the Microsoft Wireless Multimedia Keyboard 1.1 model 1014.  Recently, I had replace the batteries in the mouse at least once a week.  Is there a solution?

  The response of the mouse becomes slow and I get the low battery warning.  Until this started happening batteries have been change less than a month.

  Hello

  1. What is the brand of mouse and the model?

  2 have you ever done any recent software or changes to the hardware to the computer?

  If you use the Microsoft mouse, I suggest you follow these methods:

  Troubleshoot a wireless mouse that does not correctly:
  http://support.Microsoft.com/kb/321122

  Troubleshoot the incidents of the response to the mouse or wireless keyboard:
  http://support.Microsoft.com/kb/838398

  Use the following tips to get more life on the batteries in the keyboard and mouse:

  a. use the mouse on a surface of clear color. With the help of the mouse above a black surface can deplete the battery at a faster pace.

  b. do not use the mouse on a glass surface.

  c. when replacing the batteries, use alkaline batteries. Other types, may not last as long.

  d. when wireless devices are not in use, store them near the computer.

  I hope this helps!

• Win version first elements 14 rather than Mac version you downloaded. Serial number does not work. How to get the right serial number

  Win version first elements 14 rather than Mac version you downloaded. Serial number does not work. How to get the right serial number?

  It is unclear what problem you are facing... the wrong version or the wrong serial number.  The serial number is likely for the other version.  You don't want the serial number of Windows or the Mac version?

  One of the following conditions may be useful...

  You can exchange languages/platforms for a newer version product if you follow the instructions on the following link:

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Order-Product-Platform-Language-swap.htm

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Serial number and activation support (non - CC) chat
  https://helpx.Adobe.com/contact.html?step=PHSP-PHXS_downloading-installing-setting-up_lice nsing-activation_stillNeedHelp

• Accidentally, I bought the Mac in December and contacted support which helped me to get the right version installed, but now the PC version is not in my account downloads and I need to add it to a new computer. I don't know how to get help with this.

  Accidentally, I bought the Mac in December and contacted support which helped me to get the right version installed, but now the PC version is not in my account downloads and I need to add it to a new computer. I don't know how to get help with this. I don't remember how I got the PC version, I think I have access to my computer remotely and she sent, but I can't find any record of it.

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help
  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• seems that I bought the wrong size stock photo because it shows the low resolution 20 x 30... How can I return it and get the right kind of photo?

  How can I return it and get the right size stock photo that actually works to post 20 x 30

  Hi Debbie,.

  Once that the photos were allowed, they cannot be removed or not allowed.

  Thus, you must make sure that the image you need for your projects. You can also check the size of the images before their approval.

  Hope that answers your question.

  ~ David

• During the import of my camera or a file in Lightroom 5 my pictures are too exposed by 1-2 stops, while they are well exposed on the screen of the device. How to get the "right-exposed images on the screen?

  During the import of my camera or a file in Lightroom 5 my pictures are too exposed by 1-2 stops, while they are well exposed on the screen of the device. How to get the "right-exposed images on the screen?

  There is an option in your Lightroom preferences, under the general tab, "treat JPEG files next to raw in form of images". If you have this option is checked, then Lightroom will import and view your first two and JPEG files. You use the active D-lighting on your camera? If you are, you must disable this feature.

• HP Pavilion Notebook 15-n290sa: where can I find the right battery for HP Pavilion n290sa-15 Notebook PC

  When I turned on my laptop it came with a warning on my battery and it may need replacing. I can't find where I can buy a new battery for it.  Where can I get this part?

  Dear customer,

  Description-battery 4 cells, 41-Wh, 2.8 - Ah, Li-ion battery
  Spare part number:728460-001

  You can order the part from HP parts store using the link below. Or buy any store of the computer room.

  Link: http://hp.care/2eyb3Bh

  Contact HP All over the world

  You can also check your warranty here to check the status of the guarantee

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the white button on the right to say thank you Thumbs Up *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  GBL84

  I'm not an employee of HP

• Get the right coordinates or bottom of a symbol

  Is it possible to get the position right and at the bottom of a symbol (without adding from left to top height or width)?

  THX

  Sorry, a bit confused. Here's the correction. position() is identical to

  offset()

  var sHeight = sym.$('Rectangle').height ();

  var sWidth = sym.$('Rectangle').width ();

  var sPos = sym.$('Rectangle').offset ();

  var rightPos = sPos.left + sWidth;

  var bottomPos = sPos.top + sHeight;

  SYM.$('info').html (rightPos);

• I'm trying to vectorize an image but struggling to get the right settings for the CS6.

  Hi all, I'm trying vectorize an image, but im struggling right now. I would like to get the same effect as this: http://fav.me/d4p907m. If someone knows how its done or if I'm close to having the right settings?  http://i.imgur.com/5Oka65P.jpg (my attempt is the one of the far-right, the cs6. The one on the left, in Paint.NET, is the desired result. Thank you for reading.

  You will need to change this image in Photoshop before tracing. Then vectorize with 6 to 8 colors.

  But you'll still need to edit I subsequently. There is no way to get the eyes in this Green using autotrace. It goes the same for lips.

  You must also consider the piece manually.

• How to get the right folder name/location during import?

  I can't get LR 3.x to import into the desired folder structure, as I used to do with

  LR 1.x and 2.x.  I am trying a structure that looks like this:

  

  I want LR to automatically create a folder with the timestamp in it and find the right year and then let me in the last part of the name of the folder that identifies the object, prior to importation.  So far, all I can get is the name of the file generated automatically by date with no ability to edit or a folder name completely custom where I locate correctly and typing the entire name, including the date.  In LR 1.x and 2.x, it was really easy.  LR suggest the name of the folder (or multiple folder names if the images extend over several dates) with the date in it, and I could double-click it to add the additional designation prior to importation.  Could not find any way to do in LR 3.x.  Does that mean, that I have to do the import, wait it ends and then go back and manually rename each file that it created.  It's especially a pain when there are several folders (through multiple dates) or when my backup program has already hit and made a backup of the date generated automatically until I come and rename it manually.

  So my question is, how do I get LR for the right folder name based on the date in the folder location good auto suggestion and I would like to add something on the end of it before importing?  It was very easy in the import of LR1.x and 2.x.

  jfriend0 wrote:

  Isn't "this a common way to organize images?  He was born in LR1.x and 2.x.  I guess I'm surprised they would take something like this in LR3.x.

  He slipped under the radar when again the new window import. If all goes well, we will get it back in the next major update. In the meantime. You can add the importation of additional text in right click on the folder name and then selecting rename in the context menu.

• HP dm4-1160us - cannot get the right click of the mouse using my touchpad

  Hi all

  I bought my HP dm4-1160us model yesterday of staples. When I use it for the first time, I found a strange problem with the touch pad. When I click right click button on the touchpad, I couldn't see the right display context menu, also same problem with both left click button. I couldn't choose any text while pressing the left button or...

  Anyone, please help me if you know the solution for this. I'm sure it's a configuration problem, but your ideas are very important to me...!

  see you soon

  KIRU

  Hello

  It's all DONE... I found the solution.

  The problem was due to the physical development of the touch pad. New song itself came with this incoherent design. When the side of the left and right buttons on the touchpad was not seated properly, instead he pulled little as in an oblique position. Don't know why, just made a hard push down on the side buttons of the touchpad today... which is it... suddenly I heard a noise like fit inside in the correct position and now my touchpad is flat...! I tried the left button and right click on... WOW... worked.

  I have almost given up for the use of left & right click on my touchpad, instead I started to use my mouse...

  Thank you...

• Get the right drivers for my desktop a6000

  Hi I'm new to this site can someone please help me find the right drivers for my computer, the model number on the case is a6000 and it's a deskstop, I just removed Vista from my computer and put windows xp professional on this topic, I did a new install and of course I forgot to backup all my drivers and I looked on the HP site for the correct drivers , but my machine is not listed, but I found one with the same motherboard which is a HP M2N 68 THE (FATHER) but the rest of the speciffications aren't the same model of tis only shows 160 gig drive hard mine has 500 as it only shows 1 gig of memory mine has 3 gig so I am at a loss to which are the correct drivers for this model , I just discovered that the a6000 is a reference not to a complete HPkit, including printers ect, any help on this would be much appreciated.

  Kind regards.

  Tony.

  Hi, Tony:

  The difference in the models must be that yours has a videocard, AMD Radeon HD 3450 rather than use nVidia graphics on board.

  So, this driver should work for you based on the hardware ID you have posted.

  http://support.AMD.com/us/gpudownload/Windows/legacy/pages/legacy-radeonaiw-XP.aspx

  Best regards

  Paul