Get the time in seconds

Similar Questions

• How to get the time based on the time zone?

  Hi all

  I try to get timestamp based on the time zone I assign in the computer... for example right now I m CA, if I change the time zone of the computer IS, and use time get Sec.vi, I always get time to CA.

  and not the ACC at EST time... How can I get the time according to the time on my laptop?

  Think I remember vaguely that LV reads this parameter when loading, then try to restart LV after changing the time zone and see if that helps.

• ETA App should help to get the time and date feature HELP!

  Hi everyone, I'm doing an application where I need to get the time and date of the antone device can help, I know there is a function such as getDate or getTime but im not to know how to use it.

  As far as I know,

  I use this to get the time system (it returns long type)

  System.currentTimeMillis();
  

  After that, you can use SimpleDateFormat to convert date and time

  SimpleDateFormat sdf = new SimpleDateFormat("dd.MM.yyyy, HH:mm");
  String time = sdf.format(new Date(System.currentTimeMilis()));
  

• do not get the time zone on the basis of the city.

  Hello guys, I'm getting the time zone based on the region,

  As America/LosAngelies(-8);

  But I want that on the basis of the town as London(-7) and Adeleid (+ 5);

  How can I achieve this. Help, please.

  Resolved.

  Use the method of getDisplayNames (0). For time zones the device all.

• How to get the time since January 1, 1970 in chain November 19, 2011 21:30

  I need to get the time from 1 jan 1970.I needs time in milliseconds of the chain (November 19, 2011 21:30). This string, I'm the webservice.i need to convert milliseconds to the requirement of the application. Is it possible to do so. Please help me

  Thank you

  splits the string to create a calendar and set its fields to the values of the substring.

  httpdateparser is very particular about the format. and internal it does the same thing as a manual scan would do, I suppose.

• need to get the time host was put in the annotation and maintenance mode

  Hi - it is possible to get the time that a host has been in maintenance mode and also seize any annotation is attached to the ESX host in VC?

  Thank you

  ~ Sai

  Also, by using "get-vmhost" twice is redundant since you have channeled from get-vmhost: "E = { get-vmhost $_ |}". Get-vievent ".

  However, your order will be to return the entire event object and look like:

  Name                                    Event

  ----                                    -----

  host {VMware.Vim.EnteredMaintenanceModeEv...

  You can try below instead:

  Get-VMHost |? {$_. ConnectionState-match 'Maintenance'} | Select Name, @{N = 'Time put in MaintMode'; E={($_ | Get-VIEvent |? {$_. FullFormattedMessage-like"* entered maintenance mode *"} (). " Createduserid}}

  But it can still recover multiple events, so a way to get only the last event and time is below:

  Get-VMHost |? {$_. ConnectionState-match 'Maintenance'} | Select Name, @{N = 'Time put in MaintMode'; E={($_ | Get-VIEvent |? {$_. {"FullFormattedMessage-like" * entered maintenance mode * "} | toplayer-last 1). Createduserid}}

• How can I get the time to a server in JavaScript? Thank you

  Hello I have implemented a JavaScript from Adobe that expire after a certain date. However, the script asks both on the computer that can be changed. I thought that maybe I could get the time from a server NTP, NIST, which cannot be changed. However, I can't understand how to call and get the time server using JavaScript. I heard that JavaScript is client-side, but there is also a side server as well. Is it possible to code in Adobe Acrobat DC? I heard also that time of the OS is different maybe through Microsoft server. Could I get the OS somehow time?

  I've tried ActiveXObject which doesn't seem to work and in a desperate trial of windows.open ("Internet address"). Other thoughts on attempts? Thank you very much!!!

  Other strategies are also welcome having the exact time of the real.

  -Christmas

  The main problem with anything that is based on JavaScript is that it can be turned off easily, in order to place you in the document code will not work. Or a PDF Viewer that can't stand not JavaScript can be used. A form can submit to a server that can return a response that could include the current time.

• How to get the time of browser in the project template

  Hello
  
  With Jdev 11.1.2.3
  
  How can I get the time to browsers in the model project?
  
  Groovy accesses the browser time?
  
  I have to do some calculations (based on the time of the browser) for each row returned by a query. I think it would work if I could get time to groovy browser because I was able to perform the calculation in the SQL of my View object.
  
  But I can't seem to find how to get browser in Groovy times? Any ideas?
  
  The other option, is to use JavaScript to get the date of the browser, that should work, but the lines are displayed from a query in an AF:table, I need to apply the calculation to set the color of the table date field based on the calculation of date browser. So a java method should run for each row returned and displayed in the table.
  
  What senses seem to better you experts? I seem to be in a catch 22 here... Any ideas? And there are items that you can reference?
  
  Thanks for the help.
  
  Published by: 966952 on March 11, 2013 05:41

  As I said, you can set the inlinestyle of the field you want to change the background of a method of bean that return a style as appropriat

  // Bean code: the bean is set as requestScope bena in adfc-config.xml
  import javax.el.ELContext;
  import javax.el.ExpressionFactory;
  import javax.el.ValueExpression;
  
  import javax.faces.application.Application;
  import javax.faces.context.FacesContext;
  
  public class TableInlineStyleBean
  {
      public TableInlineStyleBean()
      {
          super();
      }
  
      // get a value
  
      private Object  getValueExpression(String name)    {
          FacesContext facesCtx = FacesContext.getCurrentInstance();
          Application app = facesCtx.getApplication();
          ExpressionFactory elFactory = app.getExpressionFactory();
          ELContext elContext = facesCtx.getELContext();
          ValueExpression lCreateValueExpression = elFactory.createValueExpression(elContext, name, Object.class);
          return lCreateValueExpression.getValue(elContext);
      }
  
      public String getCalculateStyle()    {
          //use expression from table or any other EL to do the calculation
          String val = "#{row.CommissionPct}";
          Object obj = getValueExpression(val);
          String color = null;
          if (obj != null)        {
              Number n = (Number) obj;
              // return red as background if CommissionPct > 0.2
              if (n.floatValue() > 0.2)
                  color = "background-color:Red;";
          }
          return color;
      }
  }
  

  And in the af: table a column (for example CommisionPct)

  Timo

• Query to get the time MIN

  Hi all.
  
  How can I get rank with MIN time (DESPITE DAY) (for the first six hours 08:00-14:00, AND the NEXT 6 hours 14:01 to 20:00)
  If what follows is my sample

  03/05/2012 17:30:00
  04/05/2012 17:00:00
  10/05/2012 18:00:00
  12/05/2012 08:00:00
  10/05/2012 07:00:00  
  03/05/2012 11:00:00  

  my result should be at first six hours 07:00 and 17:00 followed by six)
  
  
  Thanks in advance for any help

  Personally, I do not like to convert dates into strings and vice versa. I think that both arithmetic and precise the date date would perform better.

  Here's an alternative:

  with t as (
    select to_date('03/05/2012 17:30:00','DD/MM/YYYY HH24:MI:SS') as dt from dual union all
    select to_date('04/05/2012 17:00:00','DD/MM/YYYY HH24:MI:SS') from dual union all
    select to_date('10/05/2012 18:00:00','DD/MM/YYYY HH24:MI:SS') from dual union all
    select to_date('12/05/2012 09:00:00','DD/MM/YYYY HH24:MI:SS') from dual union all
     select to_date('10/05/2012 08:30:00','DD/MM/YYYY HH24:MI:SS') from dual union all
    select to_date('03/05/2012 11:00:00','DD/MM/YYYY HH24:MI:SS') from dual
  )
  select to_char(min(dt) keep (dense_rank first order by dt-trunc(dt)), 'HH24:MI:SS') hh24miss
  from t
  group by trunc((extract(hour from to_timestamp(dt))-2)/6)
  order by 1;
  
  HH24MISS
  --------
  08:30:00
  17:00:00
  

  Explanation:

  -Use the EXTRACT function to get the time. The date must be "converted" in a timestamp date because ANSI does not have the component "hour".
  -Subtract the difference of two hours from the time. This will change the interval from 2-8 to 0-6, 8-14-6-12, etc.
  -Divide by 6 and truncates the result. This will give 1 what it is from 08:00 to 13:59.59 hours.
  -Group by this result, which will all split into groups of ranges of 6 hours.

  -Now, in each group, so the component "hour": TRUNC (DT) is the date with time set to 0, DT - TRUNC (DT) is the component "hour".
  -Ordering by the component "hour", download the first date that corresponds to the first component of the time.

  Published by: stew Ashton on November 16, 2012 17:38

• Get the timer

  I'm trying to hide an image using the Freehand tool, and whenever I have to zoom in or out, I get the timer. Is this a known problem or is there something I can do to avoid this?

  Richard, it is the price to pay for the large images in combination with several layers. And, as far as I know, other applications have no layers... memory is really tight on these devices.

  Heiner

• Flex Mobile Application and get the time zone

  Hello

  I need to know the time in a Mobile application in order to perform some calculations.

  The problem is that I need to know the time from the GMT.

  Is there anyway to zone set by the user to detect or somehow get the time?

  not tried but it's any help

  Date

  timezoneOffset : number

  [read-only] The difference, in minutes, between the time universal (UTC) and the local time of the computer.

• How can I get the time and date appears on a sony cyber-shot camera

  How can I get the time and date appears on a sony cyber-shot camera

  Hi terpmarty,

  What is the model number of the Sony Cybershot camera?
  Instructions for superimposing the date and time are model specific. Some models do not have the ability to superimpose the date and time too. In such a case, you can use the supplied software Picture Motion Browser (PMB) or PlayMemories home (WPH) (Compatible with the Windows operating system) to print the date and time on pictures.

• get the difference in seconds to a time warp

  I need to find a way faster than:
  
  (
  To_date (to_char (TO_NUMBER (utc_date_new)), 'YYYYMMDDHH24MISS')-
  To_date (to_char (TO_NUMBER (utc_date_old)), 'YYYYMMDDHH24MISS')
  ) * 1440
  
  Thanks... ;(

  Hello

  Rusty75 wrote:
  Sorry, and Yes, his minutes (under a strain here)

  column has been defined as TIME_UTC VARCHAR2(14 BYTE) NOT NULL

  So basically it's a bad situation

  How heavy this weighing in a join will select the instruction?
  for example, left to join an intermediate table (200,000), with a huge table (40.000.000 rows)
  where is equal to staging.varchar indexed field huge varchar field table
  AND that calculated the difference > 5?

  See [when your query takes too Long | http://forums.oracle.com/forums/message.jspa?messageID=1812597#1812597] for what you must post to get advice on the setting.
  Are you saying that the part of the join condition which is the date of a table must be at least 5 minutes later at the time of the other table? In other words, you're doing something like:

  FROM          staging          s
  LEFT OUTER JOIN     huge_table     h     ON     h.txt     = s.txt
                                   AND     ( TO_DATE (s.utc_date_new, 'YYYYMMDDHH24MISS')
                                - TO_DATE (h.utc_date_old, 'YYYYMMDDHH24MISS')
                                ) * 1440 > 5
  

  If so, try to change the terms of join like this:

  FROM          staging          s
  LEFT OUTER JOIN     huge_table     h     ON     h.txt          = s.txt
                                   AND     h.utc_date_old  < s.utc_date_new
                                   AND     ( TO_DATE (s.utc_date_new, 'YYYYMMDDHH24MISS')
                                - TO_DATE (h.utc_date_old, 'YYYYMMDDHH24MISS')
                                ) > (5 / 1440)
  

  Even if the new condition (the other,

                                   AND     h.utc_date_old  < s.utc_date_new
  

  are covered by the third condition, it can leave a lot of matches be excluded without a conversion from VARCHAR2 to this DAY.
  Also, don't multiply each difference in 1440; Just compare the difference within days to a constant. I don't know if the optimizer is smart enough to do it for you, but why take the risk?

  would be to limit the calculation to: to_date (to_number (nw.time_utc), \'YYYYMMDDHH24MISS\')
  give a significant increase in speed?

  I think it's the opposite. The first TO_DATE argument must be a string; the above expression is to convert the string to a NUMBER (which takes a while), and while the NUMBER is implicitly converted to a VARCHAR2 (which takes more time).

• Get the time seconds function in LabVIEW returns incorrect Timestamp

  Hi to everyone.

  In the following link:

  http://digital.NI.com/public.nsf/allkb/0ED147D1507C183F862574BA0070AF06?OpenDocument

  is written how to solve the problem found during the passage of time stamp wrong.

  In my Im application data in files TDMS. When I read the PDM with Ms Excel data, the time is 1 hour before esactly if data is read by another computer.

  Time is okay if the data is read by the computer that registered the tdms files.

  So I colleague the link suggestion, but in records of Windows I have not found any key TZ.

  IM using old profesasional of Ms Windows Xp, version 2002, Service pack 2.

  Does anyone have suggestions for this problem?

  Thank you very much

  Ant

  I tried to use the forum suggestions, but all results were unsuccessful.

  In any case I solved the problem and I want to share with other users of Lv.

  I noticed that in the computer used for the acquisition and recording of the PDM, the time file has shown is correct but the zone was wrong (I live in + 1, and pc was set to + 0)

  The laptop I use for reading the PDM data is correctly set to + 1.

  I lined up zones, the problem disappeared.

  Good bye

• setting the time adding seconds

  Hi guys, I'm stuck and I need help with this one and its emergency situation. I don't have 1 more week to test because I needed to get the data as soon as POSSIBLE. I have this test I've done 1 week, but I messed up on something. I didn't have seconds on my get date/time.  My colleague needs the second in my test in order to get his test results.

  can anyone help me please with this.

  

  on column B, this here a way to generate seconds with labview or excel so that he would not lose the HR/min or its order.

  Please someone help me.

  Hi krispiekream,

  I hate to be the bearer of bad news, but it seems that the worksheet was written as csv - and column B was written exactly as it appears in your message.  In other words, there is no detail "seconds" to display. If a LabVIEW program creates the csv data, this program can be (should be) modified to include the details in seconds!

  Chance/Cheers.