setting the time adding seconds

Similar Questions

• VMware View customers logout - log for debugging PCoIP shows "sessionDisconnectTimer: set the timer to 2147480 seconds.

  I have operators who are still on my desktop 24/7/365.  Assuming that there are no other problems, they get kicked out of their sessions from view after about 24 days.  We use Thin Clients HP running ThinOS and VMware View Client.  When I check the log for debugging on the Windows 7 VM, I see that when the connection is established, he wrote the following line:

  2014-09-09 08:44:30, 807 DEBUG < MessageFrameWorkDispatch > [wsnm_desktop] sessionDisconnectTimer: set the timer to 2147480 seconds

  After the expiration of the time limit, I get the following messages in the same newspaper and the client disconnects:

  2014-09-09 08:30:08, 571 DEBUG < TimerService > [wsnm_desktop] sessionDisconnectTimer: triggered timer, session is disconnected.

  2014-09-09 08:30:08, 571 DEBUG < TimerService > [wsnm_desktop] session::SessionDisconnectTimedOut: Disconnect message posted on the desktop

  Where it becomes this timer of?  The global setting on the display server is maxed at 9 999 999 minutes.

  The host is EXSi 5.0.0

  VMware View Server is 5.0.0 - 481677

  See Agent 5.0.1

  Operating system is Windows 7 Pro running on the virtual version 7 machine

  It is a known problem that has been fixed in 5.3.2 view - the global time-out in minutes is converted to a time in milliseconds, which then overflows a 32-bit counter. See Overview of VMware View Release Notes

  A desktop session is timeout and be disconnected after about 24 days, 20 hours and 31 minutes, even if the Session time-out setting has been set to a higher value.

  Mike

• How to: set the time zone on a new event before adding it to the calendar?

  I want to add a new event to the calendar, but when I do gets set to a time zone from the casablanca time which means GMT, I want to solve it the current time zone of users.  What is happening now is that if the user manually changes the time zone then the start time of the event changes too.

  Here is my code so far:

  EventList _eventList = null;
                  try{
                      _eventList = (EventList)PIM.getInstance().openPIMList(PIM.EVENT_LIST, PIM.READ_WRITE);
                  }catch(PIMException e){
                      Dialog.inform("PIMException : " + e.getMessage());
  //                  return false;
                  }
  
                  BlackBerryEvent bbEvent = (BlackBerryEvent)_eventList.createEvent();
                  java.util.Calendar cal = java.util.Calendar.getInstance(); 
  
                  long start = cal.getTime().getTime();
                  if (_eventList.isSupportedField(Event.START)) {
                      bbEvent.addDate(Event.START, 0, start);
                  }
                  if (_eventList.isSupportedField(Event.END)) {
                      bbEvent.addDate(Event.END, 0, start + 3600000);
                  }
                  if (_eventList.isSupportedField(Event.SUMMARY)) {
                      bbEvent.addString(Event.SUMMARY, 0, title);
                  }
                  if (_eventList.isSupportedField(Event.LOCATION)) {
                      bbEvent.addString(Event.LOCATION, 0, address+", "+city);
                  }
                  if (_eventList.isSupportedField(Event.)) {
                      bbEvent.addString(Event.LOCATION, 0, address+", "+city);
                  }
                  Invoke.invokeApplication( Invoke.APP_TYPE_CALENDAR, new CalendarArguments(CalendarArguments.ARG_NEW, bbEvent) );
  //
  

  How can I set the time zone before calling Invoke.invokeApplication?

  OK, never mind, my Simulator has been updated with the different time zone, I thought he would pick uop, the right one.  Once I manually put itt o the right zoneit works as expected today.

• How to set the time between slides in a slideshow (iPhoto, el capitan)

  How to set the time to say - 5 seconds or 20 seconds - between slide show photos in iPhoto. I use el capitan.

  See the Settings button at the bottom right of the toolbar (at the bottom of the slide show). Click on it and you have a small window with two tabes, refers to all the slides, the other to the selected slide. You can make your choice

• Can I set the time on the lock screen is?

  When I turn on my iPhone (6 s), the first thing I see is my lock screen.  It only stays on for a few seconds, then disappears.  If I'm not enough fast slide my finger to the right to get to my home screen, I have re - activate my phone.  Is there a way I can set or change the time that the lock screen stays on?

  I don't know how to set the auto-lock function which turned the iPhone off after a certain period of inactivity.  It's different.  The automatic locking of setting has no effect on the amount of time that the lock screen remains lit.

  How do I set the time to stay on the lock screen?

  Have you considered simply use Touch ID?  In this way, it wouldn't even matter if you could see your lock screen.  Just push the "home" button and then tap your finger on the home button and your iPhone will unlock.

  Use the ID Touch on iPhone and iPad - Apple Support

• SPA112 - cannot set the time

  Hello

  For some reason, I have not been able to set the time on my SPA112. When you try to use the "Time zone" section, whether on the manual or automatic time server, it does not work. For the manual time server, I tried us.pool.ntp.org, ca.pool.ntp.org, pool.ntp.org. No matter what time zone I chose, it does not affect the time (I'm IS btw).

  Even if I enter the time in the 'Operating instructions' section, he quickly returns to the wrong time after a few seconds. It won't last. For some reason any time coming back to 4 hours in advance.

  What is causing this and how can I fix it?

  Thank you

  Yes, I remember. I was affected by it a few years ago, but I forgot that we have decided to use the NTP server.

  Yes, Payton firmware devices have a very creative approach to the time settings. It seems that the authors of the firmware do not know the hour UTC or local time.

  During the boot time is taken as-is to the RTC chip. Configuration file are analyzed, time is considered local and it is recalculated in universal time to help offset user time zone defined in the configuration.

  Well, I'm not sure with the exact logic, but remember that it is broken. It is difficult to set the time manually (and survive restart with good time still together) unless the time zone UTC and no daylightsaving is configured.

  Problem starting even with NTP enabled, but the incorrect time introduced by boot become corrected by NTP, so it does not so much.

  As you use NTP, forgotten manual settings, allows you to debug the NTP.

  The best NTP server for the purpose of debugging is closest to NTP. I don't have any information to your topology. Have your ISP a NTP server ready for you? Even your local router (the router to connect your network to the upstream) can run the NTP server.

  Most "NTP does not ' questions are associated network. As a firewall, NAT conflicts or...

• How to set the time of the video?

  There is a control named VideoPlayer (not VideoDisplay), and there a porperty named currentTime which is read-only, so I can only read the time! But how do I set the time.

  for example, when I press a button, I need 3 min video game, how to?

  Thank you!

  A function like this should help

  private void jump (): void
  {
  VP. Seek (50);
  }

  VP is the name of the videoplayer and (50) corresponding to the time you want to access in seconds

• How to set the time that my screen stays on?

  How to set the time that my screen lights up.  I have an iPod Touch 6?

  Settings > general > auto-lock

• How to set the timer on my Satellite A660 keyboard?

  I ask here, IF hadou no to set the timer on my Satellite A660 laptop keyboard. I checked in HD utilities and found NO time setting.
  ANY help would be greatly appreciated - thanks.

  Hi, mate

  to be honest, I don't understand what you mean timer keyboard...

• F20-111: is it possible to set the time to stop the laptop?

  I have a Qosmio F20-111 and I am very qurious on the posibility to set the timer to stop the laptop, maybe I can install a special program

  Hello

  Check it please electric saver tool. Here, you can set the time for hibernation mode. It's almost the same as a power option key. You can find this option in the basic settings.

• Setting the time and time zone?

  Hello, I have a problem, try to change my time to standard time. When I change the time and time zone, they are locked. It won't let me uncheck to set the time manually. The time zone is set to Apple Americas / U.S. (site time.apple.com)

  IM El Capitan OS running on a Macbook Pro late 2011.

  Thank you, James.

  This isn't a time zone. It's the time protocol Server network that sets the time automatically. He is indifferent to the zone that can be set manually or by location.

  You need unlock the prefpane by clicking on the padlock and authentication. Then, you can adjust the settings.

• Set the time on cRIo with delay VI

  Hi all

  I want to correct both the cRio and tried to use the time VI. It gave me error 2147467263 which means "not implemented".  the error message is "node in nisyscfg.lvliband Time.vi:6150001-> put time.vi".» I don't know how to fix this error and to change the time.

  I've attached a screenshot of the program to this message, I would appreciate any ideas or suggestions.

  Best regards

  Hello imnewhere

  run the vi in my computer, then it should set the time.

  

  This may also help

  How can I configure my controllers time real CompactRIO to synchronize with the SNTP servers?

• HP 7640 set the time

  Just bought HP Envy 7640.  Initial Setup gave me twice the choice.  Both were wrong, so I chose the closest.  Now I can't understand how to set the correct time.  Tried to follow the instructions in another post for a 7610.  As I am new to HP printers, I could not understand or follow the instructions on the other post.  It says something about the integrated Web server, which means nothing to me.

  My philosophy has always been: If you can't solve a problem to ask for help.  Almost immediately after asking for help, will allow you to fix the problem yourself.

  After fumbling around, I finally found the EWS and set the time...

• Get the time in seconds

  How can I get block 'get the date and time' a few seconds (all time in seconds)? I try the conversation, display format; but can not get all the time in seconds!

  Hi hlod,.

  Here are two versions for the second of the current timestamp:

  

  One of the top just converts timestamp seconds (since then), while the lower part, you get the current "seconds" value of the timestamp. The next time you better explain what you want...

  P.S.:

  Who did you 'conversation' with?

• Is it possible to set the time on a device in real time so that the time will persist when the device is not powered?

  It seems that you can not set the time on a device sbRIO (9606) and have always the exact time when the card is powered after not being fed for a while.  I have a product which will be independent (not connected to a network) when it is supplied by the customer.  I would like to collect data in a datalog and would like to put a timestamp somewhere so that I can understand when these data were collected.  If I can't get an exact date/time, then the next best solution would be to set up my datalogs so that I can at least understand the exact order in which they were collected.  (I think I can understand it without much problem)    Any suggestions as to best practices?

  Hey John,

  Without connected VBat time will not be preserved between periods of closure. Unfortunately for the 9605 and 9606 we have not a way to date the connector 9693 VBat.

  How much sbRIOs you plan to deploy with your system?  9623 and 9626 have a compartment for the RTC. If you haven't bought your sbRIOs already you could focus on the options of the form always match.

  If it is necessary to have retention time between stops, we would need to understand the extent of your application more.