get VMHost the advanced Configurations

Similar Questions

• HPE-210y; trying to get into the advanced settings of the bios to change the setting of the fan

  Hello

  Model # HPE - 210Y

  Product # BK170AA-ABA

  BUILD with ID AINAv6PRA6

  CARD MOTHER-HRS880-ΜATX

  BIOS VERSION 5.09 22/01/10

  BASIC 08.00.15 VERSION

  I have a small problem when I start my computer it gives me an error: System fan has failed. Press F2

  Well my system fan works very well done any tests on old tried on slow corners fan connector

  another connector revved at full speed. I reset CMOS changes that the battery took all the memory, video card

  and everything cleaned with air. the usual steps.

  I asked around and technicians say the problem could be in the bios settings of fan cpu (quiet mode). Everyone says

  Press f1 or f10 to get into the bios Setup. go to the Advanced tab and scroll down. but for the life of me I can't find it. I know my computer if it is safe, but it's a pain to have to press f2, whenever the computer must restart

  If anyone can help pleaseeeeee

  Thank you

  Hello

  lonee37 wrote:

  Hello

  first of all thanks for the suggestion about the Nice program trying to core temp

  I replaced the temp of problem system always the same fan has not gone above 73 F

  so I guess I'll have to talk to HP to get it solved

  

  Thank you once again for youy help

  Thaose temperatures very well. Does not even begin to worry until you start to see time @140 degrees F.

  That's well below Tj Max.

  I used to use centigrade. If the temperature is close to that you certainly can't expect much better than this.

  Best regards
  ERICO

• The use of Get - view instead of Get - VM for the advanced settings of a virtual computer

  I have a question in relation to the advanced settings of a virtual machine and using Get - view instead of Get - VM for this particular case:

  Get - VM * | Get-AdvancedSetting - name "scsi * sharing | Select the entity, Name, Value

  My idea is to use:

  Notice-EEG - ViewType VirtualMachine. Where {-not $_.} Config.Template} | Where {$_.} {Advanced.Setting - eq ' scsi * sharing "} | Select the entity, Name, Value

  but as far as I can see there is nothing for the advanced configuration of 'VirtualMachine' here: https://pubs.vmware.com/vsphere-51/index.jsp?topic=%2Fcom.vmware.powercli.cmdletref.doc%2FVirtualMachine.htm

  I also took a quick glance at https://www.vmware.com/support/developer/vc-sdk/visdk41pubs/ApiReference/vim.vm.ConfigSpec.html , but I can't figure out how to use "extraConfig"in the script PowerCLI to extract this particular information for "Sharing of SCSI".»

  There is information how to use the API to add or change a computer virtual here .vmx file key advances: http://blogs.vmware.com/PowerCLI/2008/09/changing-vmx-fi.html but it is not clear to me how to use it just to extract information without changing what.

  Try like this

  foreach ($vm in (Get-View - ViewType VirtualMachine - property Name, Config.ExtraConfig - filter @{'Config.Template ' =' False'})) {}

  $vm. Config.ExtraConfig | where {$_.} Key - like "{scsi * sharing '} |"

  Select @{N = "VM"; E = {$vm. Name}},@{N='Template'; E = {$vm. Config.Template}}, Key, Value

  }

• Find the advanced settings of vm

  I need to see what avancΘs vm is on a set of virtual machines.  I have a file with a list of advanced format csv as below.  How can I apply these out parameters for a virtual machine?  by default, I think that most of them does not exist on the virtual machines until this only added, but I would like to take this list and the list that exist on a list of virtual machines.

  for example

  $vm = get - VM myvm | Get-advancedsetting (get all the advanced list settings)

  ConfigurationParameter,

  isolation.tools.autoInstall.disable,

  insulation. Tools.Copy.Disable,

  insulation. Tools.dnd.Disable,

  isolation.tools.setGUIOptions.enable,

  insulation. Tools.Paste.Disable,

  isolation.tools.diskShrink.disable,

  isolation.tools.diskWiper.disable,

  isolation.tools.hgfsServerSet.disable,

  scsiX:Y.mode,

  vmci0. Unrestricted,

  logging,

  insulation. Monitor.Control.Disable,

  insulation. Tools.ghi.AutoLogon.Disable,

  insulation. BIOS. BBS. Disable,

  isolation.tools.getCreds.disable,

  insulation. Tools.GHI.launchMenu.change,

  isolation.tools.memSchedFakeSampleStats.disable,

  isolation.Tools.ghi.protocolhandler.info.Disable,

  isolation.ghi.host.shellAction.disable,

  isolation.tools.dispTopoRequest.disable,

  isolation.tools.trashFolderState.disable,

  insulation. Tools.ghi.trayicon.Disable,

  insulation. Tools.Unity.Disable,

  isolation.tools.unityInterlockOperation.disable,

  insulation. Tools.Unity.Taskbar.Disable,

  isolation.tools.unityActive.disable,

  isolation.tools.unity.windowContents.disable,

  insulation. Tools.Unity.push.Update.Disable,

  isolation.tools.vmxDnDVersionGet.disable,

  isolation.tools.guestDnDVersionSet.disable,

  isolation.tools.vixMessage.disable,

  floppyX.present,

  ideX:Y.present,

  parallelX.present,

  serialX.present,

  USB. Now,

  RemoteDisplay.maxConnections,

  RemoteDisplay.maxConnections,

  log.keepOld,

  log.rotateSize,

  tools.setInfo.sizeLimit,

  insulation. Device.connectable.Disable,

  insulation. Device.Edit.Disable,

  tools.guestlib.enableHostInfo,

  ethernetn. Filtern.Name = FilterName,

  vmsafe.agentAddress,

  vmsafe.agentPort,

  VMsafe.Enable,

  RemoteDisplay.vnc.enabled,

  $list = get-view - viewtype virtualmachine-property "config. ExtraConfig', 'name ' | Select name, @{n = "AdvOpt"; e = {$_.config.}} ExtraConfig}}

  Then, you will get a collection of objects as

  $liste [0]

  Name                                                                  AdvOpt

  ----                                                                  ------

  VM_NAME {nvram, virtualHW.productCompatibility...

  $liste [0]. AdvOpt and you can see all these options for vm

  You can simply look through the 'key' advopt property to see if something is inside or not

• CF9 upgrade to CF11 w/IIS is unable to get to the stage of migration/configuration

  I'll finally approval to my update not as a stand alone, side-by-side upgrade which was make me do a significant Gash was not working because of our funky twists coding and security, we have implemented in the code.

  Unfortunately, when I do the upgrade and installation it installs, but I can't move to the phase of migration/configuration of the facility.  I see nothing in the error logs.  Sometimes I get the message of 500.19 error when I try to connect to the administrator myself, other times nothing.  When I get the error HTTP 500.19-Internal Server Error it designates the file ApplicationHost.config or web.config that contains the malformed xml element.  When I look at the web.config file it contains about 9 event handlers use jrun_iis6_wildcard.dll or jrun_iis6.dll.  I do not have the IIS6, IIS7 configuration selected in the new installation of CF11, but I can't go forward.  I want to just copy these 2 files to my installation of CF9, but I don't know where to put them.  I even renamed the web.config file so that IIS would recreate it so he wouldn't refer to the Web.config CF9 old and stuck there, what a time error message referred to in these lines in the file web.config CF9.  I understand that this issue blurs the borders of category of ColdFusion/IIS.  I don't know where my error lies with IIS or CF11.  I want to just manually enter these managers in IIS 7, but my boss seems to think that we must have wsconfig do that for us in case it puts code somewhere else and we lose configuration changes that really puts us in a spiral.  Any ideas/suggestions?  I hope that I was clear enough.

  Another thing is that we have our CFIDE to CF9 file located in a directory other than for security reasons I suppose, but I can't understand how CF is aware that he must go to run.  In the CF administrator, it refers to another for CFIDE folder that does not exist.  I saw a reference to the correct location, and it is in the registry while I was sure CF11 references have been removed. CF9 he had there. I guess I wonder if there is a setting somewhere that I need to change if CF11 will look in the right place and then run and go ahead with the part of the migration/configuration of the instalation.  I can't find it in any of my research looking for the foldername in the files.

  I inherited this project and there is very little documented regarding configuration changes that have been made.

  Thanks in advance!

  Jennifer

  OK, my installation works, although I always try to get the apps to work (I think that the problems of permissions).  Since I continued to have problems of migration we created a CAR first with CF9.  We were then just do an upgrade directly on our development server.  I performed the installation with the server configuration and selected configure my server Web ColdFusion 11, IIS. When you launch the browser to connect to CF11 administrator if you get 500 error may be because the SSL for the CFIDE > folder in IIS administrator is selected.  Deselect it and this error messge should disappear (if it is).  We continue receiving a message from 404.7 error refuse to file extension.  I thought it had to do with my cfm extensions because I was trying to open a cfm, but it wasn't the case.  The error mentioned isapi.redirect.dlls.  I finally found an error message under my FailedRequestLogs IIS that mentioned something about request filtering.  It turns out that .dll is not in his list of my virtual folder from Jakarta.  Once I added this and restarted IIS, I could enter my CF Administrator 11 and installed the file of the CAR.

  Now I'm getting unauthorized errors and need to understand this. The permissions are similar to the cause of this.

  Things I learned (you know already that):

  • CF9 may have placed everywhere CFIDE, but CF11 must keep where it is installed.
  • Cf11 didn't need metabase IIS 6 installed, unlike CF9 compatibility (at least we did)
  • We continue get a MIME Type error message also overlap for .air.  Which has been added to the server level and inherited at the Web site level.  I deleted at the server level and he added to the Web site level.

  I hope this helps someone.

• Satellite L500D - always get the system configuration

  Hi, I'm trying to get my new laptop of wifes of configure. It's a L500D.

  I chose 64-bit and all I get now is system configuration. Then it will come in saying we need restart to install the drivers? has been doing this for about 30 minutes now, is there somethig wrong or is this normal?

  It's the 10th time, it has gone and done that.

  Hi Ryan,

  I have the same Satellite L500 which is similar to yours and that of s. The laptop restarts often enough until the installation is complete. That s not unusual, it is necessary to install all drivers and tools you need.

  So I hope you didn t stop or cancel this installation. Just wait a little longer and during this procedure, you can drink coffee and watch TV! ;)

• Installed wireless Belkin, unable to see network, get error windows cannot configure this wireless connection and starting the WZC abuse

  Hello

  I have a belkin wireless router that worked on my primary computer and a portable computer for years.

  Recently, I moved my main computer and now it dosnt seem to work. Belkin is installed but when I ask to see available networks, it says that windows cannot configure this wireless connection and starting the WZC abuse. Belkin still works fine on my laptop so I know no there is not a problem here. Can someone help me please? I tried to type in %SystemRoot%\system32\services.mcs\s as with a question of people, but all I get is windows can't find this.

  Any ideas please?

  Thank you

  * original title - Help... problem with belkin wireless *.

  Let's see if I can cut through it.

  You wrote:

  Click the Wireless Networks (see this picture) - I did

  Is the box 'Use Windows to configure my wireless network' checked or unchecked? There is no such box.

  I connect using - he says belkin. another box saying this connection uses the following items. then underneath there are 3 tabs - install, uninstall and properties. If I press on properties it says name provider and in this box, it says windows index.

  It seems that you don't have not clicked the "Wireless networks" tab, after you open the properties of your wireless adapter.  From your description, you look at the 'Général' tab: click HERE to see the "Général" tab Click HERE to see the 'Wireless Networks' tab.

  There are 5 columns: name, description, status, startup type and log as.  The values for the last 3 columns should be started, automatic and Local System - on my screen there are 4 tabs at the top - general, connect you, recovery and dependency.

  You skipped a step... 5 columns are in the 'Services' window initial... you arrive at "4 tabs at the top", AFTER you double-click the Wireless Auto Configuration.

  Status of the service which includes 4 boxes. stop suspend and resume. the button highlighted in the start menu

  Just to the right of the expression "Service status", you should see a Word.  On your system, this word probably is "stopped."  The 4 buttons (boxes) are how to control the service.  Because you said that the highlighted button is 'start' which means that the service is currently stopped, and you will need to click on this button "start" to start.

  I strongly suspect that you had used the Belkin utility to control your adapter - and now, you also started WZC.  As I wrote above, you can have both running at the same time.

  When you click the icon of your "Belkin", do you have a screen that looks like this: http://www.wi-fiplanet.com/img/2006/belkinn1/08.jpg

  If so, you should return to the utility Services and 'Stop' the automatic configuration service.  If you want to use WZC instead of the Belkin utility, see http://en-us-support.belkin.com/app/answers/detail/a_id/40/related/1

  I'm not familiar with the Belkin Wireless networking utility, but many wifi manufacturer utilities can be used to turn your wifi on and off, then maybe your was off (the adapter on your computer - not the router).  If you identify the model of the card you have in your main computer, I'll see if I can find the manual on the Belkin website and maybe give you a little more information.

• To get on the internet I have to re - configure the NIC or restart the system

  To get on the internet I have to re - configure the network card or restart the system. My os is Vista 32 bit. How can I fix this so I can do things on the internet.

  I use Internet Explorer 9

  Hello

  You may need to update the network card with the latest drivers from the manufacturer's website.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  See: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-network-adapter-problems

• Why Dell has paralyzed the Panel advanced configuration options of power on the venue Pro 8?

  

  Reference paralyzed Dell Control Panel advanced configuration options of power on the venue Pro 8.

  Dell must provide a patch restores full power plan setting up advanced features of Windows.

  Adding a new default Dell Windows power plan doesn't bother me, but they must not paralyze the Panel Windows distribution, power options, or remove the standard Windows power management.

  That has something to do with the sleep settings connected / configuration Microsoft / Dell are doing on these units. It is the same for versions place 11 MS Pro. units of vPro are different because no standby connected supports. With Eve logged onto the available settings are limited to what would not interfere with it. If you would change settings (e.g., SSD or Wifi Powermanagement Disabled) issues as sleep function in the process of disappearance and others. Microsoft also has requirements to be connected certified standby.
  Again, not 100% sure if it's MS or Dell do but my guess would be Microsoft because I saw the same thing with different units.
  If you turn off the connected Eve all Windows power plans are displayed and all the advanced features of power are available.

  Use the command Regedit and change the following:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Power
  Change the value for the key CsEnabled from 1 to 0 and reboot.
  1 means connected off standby active and 0.
  Try it and see if it solves your problem.

  BTW: by disabling the connected standby battery also will show the time remaining not only the percentage of battery life. :-)

• Default configuration of the Windows, restore features changes, do not turn off your computer error/loop - failed to get on the desktop

  Hi, I restored my Toshiba laptop yesterday afternoon, this morning, when I turned it on it started to configure the updates and let him be like that so I made breakfast.

  When I came back, I found this saying ' failure set features Windows restore changes do not turn off your computer ' its been like that for about 10 hours.

  I wonder how can I fix? I tried it turn on and turn off, but the same problem persists.

  It came with 8 Windows preinstalled thereforeI don't have the installation disk and I don't have access to the desktop

  Any solution please?

  Thank you

  Hello

  I'll get you the link and restore your computer to a previous working state.

  http://support.Microsoft.com/kb/949358/en-us

  Please reply with the status.

• Get-vmHost replace space and convert the numbers of two places decimal

  I have a script with a Get -VMHost command that brings all the I need information, but ...
  
  1 I need to come the table below ' ; " as opposed to space;
  2 If there is more than one area is not necessarily see two ' ; ' But only one;
  3 I want to with the return carrier at the end of each line.
  4 - I want convert values of numbers with only two decimal places

  COMAND in the script:

  [Sub] (Get-PSSnapin VMWare.VimAutomation.Core - ErrorVariable getVmwareSnapinErr 2 > $null)

  If ($getVmwareSnapinErr.Count - gt 0) {Add-PSSnapin VMware.VimAutomation.Core}

  $Name = @{label ="";}

  Expression = {$_.} Name};

  Align = "Left".

  Width = 29}

  $NumCpu = @{label ="";}

  Expression = {$_.} NumCpu};

  Align = "Left".

  Width = 2}

  $CpuUsageMhz = @{label ="";}

  Expression = {$_.} CpuUsageMhz};

  Align = "Left".

  Width = 5}

  $CpuTotalMhz = @{label ="";}

  Expression = {$_.} CpuUsageMhz};

  Align = "Left".

  Width = 5}

  $MemoryUsageGB = @{label ="";}

  Expression = {$_.} MemoryUsageGB};

  Align = "Left".

  Width = 5}

  $MemoryTotalGB = @{label ="";}

  Expression = {$_.} MemoryTotalGB};

  Align = "Left".

  Width = 5}

  Claire

  SE connect-VIServer 10.8.3.87 - Tolkien username-password 123456

  Get-VMHost-HP_Lab location-connected state. Format-Table - AutoSize - HideTableHeaders $Name, $NumCpu, $CpuUsageMhz, $CpuTotalMhz, $MemoryUsageGB, $MemoryTotalGB | Out String width 100

  Result:

  32 14875 14875 dhp00905.df.intrabb.BB.com.br 255,989841461181640625 114,048828125

  32 17759 17759 lhp00901.df.intrabb.BB.com.br 255,989841461181640625 133,103515625

  32 14892 14892 lhp00902.df.intrabb.BB.com.br 255,989841461181640625 209,2626953125

  32 12599 12599 hhp00906.df.intrabb.BB.com.br 255,989841461181640625 138,599609375

  32 15748 15748 hhp00908.df.intrabb.BB.com.br 255,989841461181640625 134,26171875

  32 16946 16946 hhp00907.df.intrabb.BB.com.br 255,989841461181640625 142,251953125

  Desired result

  
  

  dhp00905.df.intrabb.BB.com.br; 32; 14875; 14875; 114,04; 255,98

  lhp00901.df.intrabb.BB.com.br; 32; 17759; 17759; 133,10; 255,98

  lhp00902.df.intrabb.BB.com.br; 32; 14892; 14892; 209,26; 255,98

  hhp00906.df.intrabb.BB.com.br; 32; 12599; 12599; 138,59; 255,98

  hhp00908.df.intrabb.BB.com.br; 32; 15748; 15748; 134,26; 255,98

  hhp00907.df.intrabb.BB.com.br; 32; 16946; 16946; 142,25; 255,98

  This is because you are sending to values of hash tables.

  You must change these

  $Name = $_. Name

  ....

  Any alignment you want to do, can be done in the format strings.

• Add the serial number send_break_action ServiceTag) VIProperty to the result of Get-VMHost

  I am currently working on some features of reports and I want to understand the service host tag / serial number information. This seems to do (and it works with my three HP Proliant Servers):

  New-VIProperty-name ServiceTag ObjectType - VMHost-value {}

  Param ($vmhost)

  ($VMHost.Extensiondata.hardware.SystemInfo.OtherIdentifyingInfo | where {$_.}) IdentifierType.Key - eq "ServiceTag"}). IdentifierValue

  }

  It adds a ServiceTag property to the output of Get-VMHost. I would like to know how it works with other systems.

  It depends on how the HW vendor has implemented this.

  And for the same HW provider it will also depend on the specific model.

  In my experience, a better way, or at least a more standardized, would be to use the interface of the CIM.

• I can't seem to install indesign, get me the following message: no application is configured pour open URL, what to do? Thank you pour your help!

  I can't seem to install indesign, get me the following message: "no application is configured to open URL", what to do? Thank you pour your help!

  Please read https://forums.adobe.com/thread/1499014

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.

  http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html

• Update trial version, but got and even that will not open because my email associated with the account configuration has changed, so I can't get into it at all. Adobe said that I can't change my email that I have to close my account and start a new. any w

  Update trial version, but got and even that will not open because my email associated with the account configuration has changed, so I can't get into it at all. Adobe said that I can't change my email that I have to close my account and start a new. any way around this? sounds to me ridiculous

  Contacted Adobe Support and they recommended to configure the new Adobe ID?

• Get-VMHost: you have changed the world: DefaultVIServer and global: DefaultVIServers system variables. This is not allowed. Please reset them to $null and reconnect the server vSphere.

  Hello world

  After the upgrade to PowerCLI version 5.1 however I can't run even the simplest command because it always ends up with the following error:

  Get-VMHost: you have changed the world: DefaultVIServer and global: DefaultVIServers system variables. This is not aRA. Please reset them to $null and reconnect the server vSphere.

  C:\Users\Albert\AppData\Local\Temp\7900df01-f6c1-48c6-ac1e-047dfff90fb6.ps1:1 tank: 11
  + Get-VMHost < < < <
  + CategoryInfo: NotSpecified: (:)) [Get-VMHost], InvalidState)
  + FullyQualifiedErrorId: VMware.VimAutomation.ViCore.Types.V1.ErrorHandling.InvalidState, VMware.VimAutomation.ViCore.Cmdlets.Commands.GetVMHost

  Can someone please suggest to me how to fix the script for my v3.2.0 PowerGUI IDE can work with the latest PowerCLI in my computer laptop 64 bit Windows 7?

  Thank you.

  And I just tried with PowerGui (same versions of PowerGUI and PowerCLI you use), no problem.

  Must be something local on your desktop.

  Maybe try a uninstall/reinstall of PowerGUI?