CF9 upgrade to CF11 w/IIS is unable to get to the stage of migration/configuration

I'll finally approval to my update not as a stand alone, side-by-side upgrade which was make me do a significant Gash was not working because of our funky twists coding and security, we have implemented in the code.

Unfortunately, when I do the upgrade and installation it installs, but I can't move to the phase of migration/configuration of the facility.  I see nothing in the error logs.  Sometimes I get the message of 500.19 error when I try to connect to the administrator myself, other times nothing.  When I get the error HTTP 500.19-Internal Server Error it designates the file ApplicationHost.config or web.config that contains the malformed xml element.  When I look at the web.config file it contains about 9 event handlers use jrun_iis6_wildcard.dll or jrun_iis6.dll.  I do not have the IIS6, IIS7 configuration selected in the new installation of CF11, but I can't go forward.  I want to just copy these 2 files to my installation of CF9, but I don't know where to put them.  I even renamed the web.config file so that IIS would recreate it so he wouldn't refer to the Web.config CF9 old and stuck there, what a time error message referred to in these lines in the file web.config CF9.  I understand that this issue blurs the borders of category of ColdFusion/IIS.  I don't know where my error lies with IIS or CF11.  I want to just manually enter these managers in IIS 7, but my boss seems to think that we must have wsconfig do that for us in case it puts code somewhere else and we lose configuration changes that really puts us in a spiral.  Any ideas/suggestions?  I hope that I was clear enough.

Another thing is that we have our CFIDE to CF9 file located in a directory other than for security reasons I suppose, but I can't understand how CF is aware that he must go to run.  In the CF administrator, it refers to another for CFIDE folder that does not exist.  I saw a reference to the correct location, and it is in the registry while I was sure CF11 references have been removed. CF9 he had there. I guess I wonder if there is a setting somewhere that I need to change if CF11 will look in the right place and then run and go ahead with the part of the migration/configuration of the instalation.  I can't find it in any of my research looking for the foldername in the files.

I inherited this project and there is very little documented regarding configuration changes that have been made.

Thanks in advance!

Jennifer

OK, my installation works, although I always try to get the apps to work (I think that the problems of permissions).  Since I continued to have problems of migration we created a CAR first with CF9.  We were then just do an upgrade directly on our development server.  I performed the installation with the server configuration and selected configure my server Web ColdFusion 11, IIS. When you launch the browser to connect to CF11 administrator if you get 500 error may be because the SSL for the CFIDE > folder in IIS administrator is selected.  Deselect it and this error messge should disappear (if it is).  We continue receiving a message from 404.7 error refuse to file extension.  I thought it had to do with my cfm extensions because I was trying to open a cfm, but it wasn't the case.  The error mentioned isapi.redirect.dlls.  I finally found an error message under my FailedRequestLogs IIS that mentioned something about request filtering.  It turns out that .dll is not in his list of my virtual folder from Jakarta.  Once I added this and restarted IIS, I could enter my CF Administrator 11 and installed the file of the CAR.

Now I'm getting unauthorized errors and need to understand this. The permissions are similar to the cause of this.

Things I learned (you know already that):

  • CF9 may have placed everywhere CFIDE, but CF11 must keep where it is installed.
  • Cf11 didn't need metabase IIS 6 installed, unlike CF9 compatibility (at least we did)
  • We continue get a MIME Type error message also overlap for .air.  Which has been added to the server level and inherited at the Web site level.  I deleted at the server level and he added to the Web site level.

I hope this helps someone.

Tags: ColdFusion

Similar Questions

  • I am unable to connect to creative cloud. The error that says Unable to get on the Adobe servers

    I am unable to connect to creative cloud. The error that says Unable to get on the Adobe servers

    Please see:

    1. Creative cloud activation and login troubleshooting
    2. Adobe Download Manager cannot happen on the Adobe servers
    3. Cloud cannot create arrived on Adobe servers.

    You can try to remove creative cloud app and reinstall it.

    Install the cloud creative app - https://helpx.adobe.com/creative-cloud/help/install-apps.html

  • Cannot open the synaptics pointing device in windows vista, upgrades are far but message error, unable to connect to the synaptics pointing device

    Hi I have a problem with my mouse/pointer when I click on the mouse to open it I have error message unable to connect to the synaptics pointing device. Have you checked the updates that are up-to-date, and the driver is ok, not sure what to try next need to make any changes to the mouse pointer

    with Brice thanks.

    Hi paiyay,

    Thanks for posting in the Microsoft Community.

    I understand that you are unable to open the synaptics pointing device in windows vista

    · You did changes to the computer before the show?

    · What happens when you click the Yes button in the error message?

    · You are able to use the mouse on the system?

    I suggest you uninstall the software from programs and features and then try to open the properties of the mouse and check if you are able to open the mouse properties then I would you recommend to uninstall the drivers that are installed on the system in the Device Manager and then download the drivers from the link below and check if the problem is resolved.

    http://www.Synaptics.com/support/drivers

    http://www.Synaptics.com/resources/drivers

    Updated a hardware driver that is not working properly

    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

    Connect the hard disk, and then try running the fix tool of the article below and check out them.
    Hardware devices do not work or are not detected in Windows
    http://support.Microsoft.com/mats/hardware_device_problems/

    I suggest you to contact the mouse manufacturer for assistance. Click on the link below.

    http://www.Synaptics.com/

    See also:

    FAQ and troubleshooting

    http://www.Synaptics.com/resources/consumer-tips

  • I'm unable to get on the daily challenge of Microsoft games. Getting a message that says code error xbox 004500

    I am unable to connect to the daily challenges of Microsoft games.  Get an xbox 004500 error message

    Hello

    The Microsoft Community (formerly answers) has no influence on the XBox or XBox Live
    If you need to contact them.

    XBox - Support
    http://support.Xbox.com/en-us/pages/default.aspx

    XBox - Contact us (support)
    http://support.Xbox.com/en-us/contact-us

    XBox - Support Forums - and my XBox (top-right)
    http://forums.Xbox.com/

    Xbox technical support phone number

    • Toll-free: (800) 4MY-XBOX or (800) 469-9269

    Opening hours: 600 PM 2200 h / Pacific / daily

    International (direct line in the U.S.): 425-635-7180

    XBox LIVE - Service status
    http://support.Xbox.com/en-us/Xbox-Live-status

    Manage the XBox Live account
    http://support.Xbox.com/en-us/billing-and-subscriptions/account-management/Xbox-Live-account-management

    XBox Live Sign-in problems
    http://support.Xbox.com/en-us/billing-and-subscriptions/Windows-Live-ID/Xbox-Live-sign-in

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Add WRT54G: second router / access point, unable to get to the outside network.

    Here is the prob:

    We just got cable internet the other day and the cable operator insisted on using their v1000 Belkin F5D7234-4 instead of my WRT54G V8. So I thought I'd use the WRT54G as a second router/AP (without wireless/LAN/WAN). I was eager to do this by running an ethernet in the WAN on the WRT54G port and plug it into the port of the client on the Belkin, place the wrt - 54 G at the other end of the House and have the WRT54G broadcasting the same SSID and require authentication even as the Belkin and use the Belkin to Linksys Wireless Bridge. In this way, it will extend my wireless network and all computers can access the internet and the other (wireline customers will keep at wire-speed, wireless is not authicate to two different networks.)

    I can't get the Linksys network based able to see all the other computers outside the WRT - 54 G, even for wireless clients. On the side of things Belkin network, I can't ping the router even if she pulls a DHCP in the Belkin address. All customers the Belkin side can meet and thin internet. I've fiddled with the WRT54-g for almost an entire weekend now with no result. The WRT54G can see the other router as a DNS as well as external DNS providers, but none of the client computers can. Basically, I'm wanting to extend the network of Belkin 4 as most cable customers and fill a few dead wireless, and make the visible computer on the same network of suggestions?

    Parameters of WRT - 54G:

    Automatic configuration - DHCP

    Same domain name like Belkin
    IP router set a tire to the DHCP server

    DHCPserver OFF

    Mode of operation: router

    Safe are disabled.

    Wireless SSID is the same as Belkin

    Wireless channel is the same as belkin.

    Method and auth. key is the same as belkin.

    Belkin:

    DHCP is on.

    15 IP addresses available.

    Wireless gateway is on with the WRT54G Wireless MAC address information.

    Ethernet cords are connected.

    I played with static routes for hours, tried the option routing dynamic, even tried DMZing of the WRT54G intellectual property in the belkin and still unable to connect to the internet. Tried the Belkin MAC address cloning. Nothing seems to work. When I plug the WRT - 54G directly in my digital/Modem/phone cable box, I get internet and everything. I'm at the point of throwing same DD - WRT on it.

    But beyond connection "wireless" I discovered really does not work if well (drops random wireless speeds seize up) with two different pieces of equipment running two different firmwares. So the thing connecting wireless set was out the window.

    I however knew what I had to do Linksys firmware:

    1.) DHCP clients forward.

    Customers of Belkin - network

    Linksys customers - network B

    The dhcp pool was not get transferred to the client computers. That is the 1-2 on network computer had XXX. XXX.100 - 102 for 3-4 computers on network B was YYY. YYY. YYY statically set by Windows. Even after changing to a static address on the network A dhcp scope I could still connect to the internet or to one of the computers on the network.

    The static routing table seemed not lead me anywhere either, and I've tried dozens of configurations.

    The way I got it Setup is with the customer enthernet of the Belkin ROUTER to THE Internet on the Linksys WRT54G port 1-4. Maybe I should have plugged the ethernet on the client side of 4 ports Linksys?

    Anyway DD - WRT redirect DCHP feature was what I need.

    Regarding the scenario wireless two routers have the same encryption method and key but different channels and ssid. Who, with DD - WRT for some reason when I jump on the wireless-B, Vista will be ID it as network A (B).

    I hope that it has not violated anything except the guarantee which was anyway. The reason for which I needed for my network up this way is because I do a lot of work using VM (of various operating systems), is simply easier to have two separate semi networks. (to different physical locations in the House)

  • Re: Satellite Pro L300 - unable to get into the BIOS or boot

    I have a Satellite L300, who will not get past the POST or the Toshiba start screen. It says to press F2 to enter setup or F12 for the boot sequence, but by pressing buttons does nothing and nothing happens - it just stays there. the HARD drive activity light flashes for a few seconds, then stops.

    I tried the new RAM and a HARD drive different, both with the connected power and battery alone without success!

    someone at - it suggestions?

    Hi jhilton0105,

    Hmm, I think that you have tried everything you can do, and in my opinion, it seems to be a hardware malfunction. Maybe it s related to the motherboard, CPU, module ROM or something else
    I think that your laptop should be verified professional people to get rid of this problem.

    You can find a list of aspic here:
    http://EU.computers.Toshiba-Europe.com > support & downloads > find an ASP.

    Good luck! :)

  • Delete questions of history. Unable to get at the bottom of the dialog box. Impossible to move or reduce the size of the dialog box. ? Caused by microsoft update? Use Vista

    I have Vista 64 bit. Experienceing a constellation of problems over the past two weeks. Cannot change the screen resolution. Desk top icons appear very large.  Cannot move icons.  Dialog box to delete history extends under the bottom of the screen and I can't move or reduce it. Impossible to tell if the deletion of history is applied. (This is disturbing).  Cursor publishes too... cannot highlight text correctly... or move text

    Think problem was caused by the recent Microsoft updates. Don't know what the difficulty! or how.

    I can not even rearrange the sentences in this area in order to make more sense!

    Hello

    ·         Which have been updated that you have installed on the system?

    I suggest you look at in the history of the update and check the updates have been installed and whether or not they have been installed successfully.

    Check the updates that have been installed in the history of the update.
     

    (a) open Windows Update by clicking the Start button. In the search box, type Update, and then in the list of results, click Windows Update.

    (b) in the left pane, click view update history.

    (c) to view more information about an update, double-click it.

    Please post back with details updates in the update history.

  • keyboard does not work when you start. Unable to get to the bios screen.

    When I reboot to get to the bios screen my keyboard does become functional until windows load. I don't remember what is a problem in the past, but since I disconnected everything recently I was wondering if it happens to be a USB port which remains hot during startup.  I have a Gigabyte motherboard.

    Thanks for all the help.  I found a port that remained hot during startup.  Not an easy feat because there are 6 USB ports on my MB.  Then after may restart to finally find, I remembered that I have also 2 USB ports on my Dell monitor that remain hot even when the computer is off.  A lesson I will never forget.

  • Unable to get into the MSN account or by mail WHEN you use Norton connection for security reasons. I can't add attatchments.

    I use Norton Secure login. MSN & mail is the only site that I can't access. This mind by scary business monitoring, MSN? Sorry ' end that.  I can't add attachments to the e-mail message. Apparently, there are many of us with the problem of attachments. Why I use msn? anyone?

    Hello

    Thanks for posting the request in the Microsoft community forums.

    It seems that you are not able to MSN account or by mail when you use the connection of Norton.

    You can try to disable Norton antivirus installed on the computer and check is that you are able to connect to MSN and email.
    http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
    NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    We know if you need help with Windows. We will be happy to help you.

  • "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"- by a loop for hours, unable to get to the start

    Hello.

    First of all, I read this page - http://support.microsoft.com/kb/949358

    It says this - "Note if this problem occurs, it may take 30 minutes to undo changes, and then the system will display the login screen Windows.»

    But this is not true for me, I have nowhere near the logon screen. Earlier the PC rebooted, but is IMMEDIATELY returned to the exact same failure screen. There is a line.

    A few notes:

    (1) it is a G46VW mobile computer ASUS 'Republic of gamers ". I had 3 days. There is no DVD drive so I can't use any kind of boot disk.

    (2) I have no attached removable media.

    (3) I don't know how to get to any screen except that this form of failure, so do not know how to enter in a single command.

    (4) all that happens is that I see the ASUS logo, then this screen failure immediately.

    I'm panicking, it's all new. It has worked very well. I started it today, it has been updated slowly. I saw him at about 17%. Then I looked at a few hours later and saw that he was stuck in this process.

    What can I do?

    Hi James,

    I appreciate your patience and manual labor.

    You can follow the steps in the link below.

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058/en-us

    Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. Follow these steps to resume and restore the registry.

    1. Go to Start creen and type regedit.
    2. Select regedit , then right-click on the screen.
    3. Click run as administrator.
    4. Right click on computer , then click export.
    5. In the Save in box, select the location where you want to save the backup copy to, and then type a name for the backup file in the file name box.
    6. Click Save.
    7. If something goes wrong, you can do a right click on the registry backup file and click on Merge.

    Write to us at the State of the question.

  • WebCenter spaces managed server error: JPS-01520: cannot initialize the identity store, cause: oracle.security.idm.ConfigurationException: unable to connect to the directory. Check configuration information...

    WebCenter Portal 11.1.1.9.2 has been installed on a single node and configured using external policy based JPS Sotre 11.1.1.7 OID LDAP and Oracle Access Manager 11.1.2.2.0 for Single Sign-On.

    For WebCenter Portal managed starting the server (and all the other managed servers, Portlet, Collaboration, utilities, etc.) the following error message is recorded in the log files:

    <Oct 26, 2015 10:35:32 AM COT> <Warning> <oracle.jps.idmgmt> <JPS-01520> <Cannot initialize identity store, cause: oracle.security.idm.ConfigurationException: Failed to connect to directory. Check configuration information..> 
<Oct 26, 2015 10:35:32 AM COT> <Error> <oracle.adf.mbean.share.connection.ConnectionsHelper> <BEA-000000> <Failed to get credentials for alias ADF and connection name PageletConnection
java.lang.RuntimeException: java.security.PrivilegedActionException: oracle.security.jps.service.idstore.IdentityStoreException: JPS-01520: Cannot initialize identity store, cause: oracle.security.idm.ConfigurationException: Failed to connect to directory. Check configuration information..
  at oracle.adf.share.security.providers.jps.JpsUtil.getDefaultIdentityStore(JpsUtil.java:386)
  at oracle.adf.share.security.providers.jps.JpsUtil.getDefaultIdentityStore(JpsUtil.java:363)
  at oracle.adf.share.security.providers.jps.JpsUtil.getUserUniqueIdentifier(JpsUtil.java:272)
  at oracle.adf.share.security.providers.jps.JpsUtil.getUserUniqueIdentifier(JpsUtil.java:233)
  at oracle.adf.share.security.providers.jps.CSFCredentialStore.getCurrentUserUniqueID(CSFCredentialStore.java:1253)
  at oracle.adf.share.security.providers.jps.CSFCredentialStore.fetchCredential(CSFCredentialStore.java:489)
  at oracle.adf.share.security.providers.jps.CSFCredentialStore.fetchCredential(CSFCredentialStore.java:653)
  at oracle.adf.share.security.credentialstore.CredentialStore.fetchCredential(CredentialStore.java:187)
  at oracle.adf.mbean.share.connection.ConnectionsHelper.getCredentials(ConnectionsHelper.java:208)
  at oracle.adf.mbean.share.connection.ReferenceHelper.getCredentials(ReferenceHelper.java:334)
  at oracle.adf.mbean.share.connection.ReferenceHelper.createReference(ReferenceHelper.java:299)
  at oracle.adf.mbean.share.connection.ConnectionsRuntimeMXBeanImpl.registerBean(ConnectionsRuntimeMXBeanImpl.java:499)
  at oracle.adf.mbean.share.connection.ConnectionsRuntimeMXBeanImpl.createConnection(ConnectionsRuntimeMXBeanImpl.java:577)
  at oracle.adf.mbean.share.connection.ConnectionsRuntimeMXBeanImpl.configObjectReloaded(ConnectionsRuntimeMXBeanImpl.java:778)
  at oracle.adf.mbean.share.connection.ConnectionsRuntimeMXBeanImpl.postRegister(ConnectionsRuntimeMXBeanImpl.java:1089)
  at oracle.as.jmx.framework.standardmbeans.spi.OracleStandardEmitterMBean.doPostRegister(OracleStandardEmitterMBean.java:556)
  at oracle.adf.mbean.share.AdfMBeanInterceptor.internalPostRegister(AdfMBeanInterceptor.java:223)
  at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doPostRegister(AbstractMBeanInterceptor.java:204)
  at oracle.as.jmx.framework.generic.spi.interceptors.DefaultMBeanInterceptor.internalPostRegister(DefaultMBeanInterceptor.java:87)
  at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doPostRegister(AbstractMBeanInterceptor.java:204)
  at oracle.security.jps.ee.jmx.JpsJmxInterceptor$4.run(JpsJmxInterceptor.java:605)
  at java.security.AccessController.doPrivileged(Native Method)
  at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)
  at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:464)
  at oracle.security.jps.ee.jmx.JpsJmxInterceptor.internalPostRegister(JpsJmxInterceptor.java:622)
  at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doPostRegister(AbstractMBeanInterceptor.java:204)
  at oracle.as.jmx.framework.generic.spi.interceptors.DefaultMBeanInterceptor.internalPostRegister(DefaultMBeanInterceptor.java:87)
  at oracle.as.jmx.framework.generic.spi.interceptors.ContextClassLoaderMBeanInterceptor.internalPostRegister(ContextClassLoaderMBeanInterceptor.java:167)
  at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doPostRegister(AbstractMBeanInterceptor.java:204)
  at oracle.as.jmx.framework.generic.spi.interceptors.DefaultMBeanInterceptor.internalPostRegister(DefaultMBeanInterceptor.java:87)
  at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doPostRegister(AbstractMBeanInterceptor.java:204)
  at oracle.as.jmx.framework.standardmbeans.spi.OracleStandardEmitterMBean.postRegister(OracleStandardEmitterMBean.java:521)
  at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.postRegister(DefaultMBeanServerInterceptor.java:1024)
  at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerDynamicMBean(DefaultMBeanServerInterceptor.java:974)
  at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerObject(DefaultMBeanServerInterceptor.java:900)
  at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerMBean(DefaultMBeanServerInterceptor.java:324)
  at com.sun.jmx.mbeanserver.JmxMBeanServer.registerMBean(JmxMBeanServer.java:522)
  at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$27.run(WLSMBeanServerInterceptorBase.java:714)
  at java.security.AccessController.doPrivileged(Native Method)
  at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.registerMBean(WLSMBeanServerInterceptorBase.java:709)
  at weblogic.management.mbeanservers.internal.JMXContextInterceptor.registerMBean(JMXContextInterceptor.java:445)
  at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$27.run(WLSMBeanServerInterceptorBase.java:712)
  at java.security.AccessController.doPrivileged(Native Method)
  at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.registerMBean(WLSMBeanServerInterceptorBase.java:709)
  at weblogic.management.jmx.mbeanserver.WLSMBeanServer.registerMBean(WLSMBeanServer.java:462)
  at oracle.as.jmx.framework.wls.spi.security.PrivilegedMBeanServerInterceptor$1.run(PrivilegedMBeanServerInterceptor.java:55)
  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
  at oracle.as.jmx.framework.wls.spi.security.PrivilegedMBeanServerInterceptor.registerMBean(PrivilegedMBeanServerInterceptor.java:60)
  at oracle.adf.mbean.share.connection.ADFConnectionLifeCycleCallBack.contextInitialized(ADFConnectionLifeCycleCallBack.java:111)
  at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:481)
  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
  at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:181)
  at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1871)
  at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3173)
  at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1527)
  at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:486)
  at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
  at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
  at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
  at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
  at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
  at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
  at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
  at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:671)
  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
  at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
  at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
  at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
  at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:80)
  at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:187)
  at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:379)
  at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
  at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
  at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
  at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:261)
  at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:220)
  at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
  at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
  at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
  at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
  at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:263)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused By: java.security.PrivilegedActionException: oracle.security.jps.service.idstore.IdentityStoreException: JPS-01520: Cannot initialize identity store, cause: oracle.security.idm.ConfigurationException: Failed to connect to directory. Check configuration information..
  at java.security.AccessController.doPrivileged(Native Method)
  at oracle.adf.share.security.providers.jps.JpsUtil.getDefaultIdentityStore(JpsUtil.java:381)
  at oracle.adf.share.security.providers.jps.JpsUtil.getDefaultIdentityStore(JpsUtil.java:363)
  at oracle.adf.share.security.providers.jps.JpsUtil.getUserUniqueIdentifier(JpsUtil.java:272)
  at oracle.adf.share.security.providers.jps.JpsUtil.getUserUniqueIdentifier(JpsUtil.java:233)
  at oracle.adf.share.security.providers.jps.CSFCredentialStore.getCurrentUserUniqueID(CSFCredentialStore.java:1253)
  at oracle.adf.share.security.providers.jps.CSFCredentialStore.fetchCredential(CSFCredentialStore.java:489)
  at oracle.adf.share.security.providers.jps.CSFCredentialStore.fetchCredential(CSFCredentialStore.java:653)
  at oracle.adf.share.security.credentialstore.CredentialStore.fetchCredential(CredentialStore.java:187)
  at oracle.adf.mbean.share.connection.ConnectionsHelper.getCredentials(ConnectionsHelper.java:208)
  at oracle.adf.mbean.share.connection.ReferenceHelper.getCredentials(ReferenceHelper.java:334)
  at oracle.adf.mbean.share.connection.ReferenceHelper.createReference(ReferenceHelper.java:299)
  at oracle.adf.mbean.share.connection.ConnectionsRuntimeMXBeanImpl.registerBean(ConnectionsRuntimeMXBeanImpl.java:499)
  at oracle.adf.mbean.share.connection.ConnectionsRuntimeMXBeanImpl.createConnection(ConnectionsRuntimeMXBeanImpl.java:577)
  at oracle.adf.mbean.share.connection.ConnectionsRuntimeMXBeanImpl.configObjectReloaded(ConnectionsRuntimeMXBeanImpl.java:778)
  at oracle.adf.mbean.share.connection.ConnectionsRuntimeMXBeanImpl.postRegister(ConnectionsRuntimeMXBeanImpl.java:1089)
  at oracle.as.jmx.framework.standardmbeans.spi.OracleStandardEmitterMBean.doPostRegister(OracleStandardEmitterMBean.java:556)
  at oracle.adf.mbean.share.AdfMBeanInterceptor.internalPostRegister(AdfMBeanInterceptor.java:223)
  at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doPostRegister(AbstractMBeanInterceptor.java:204)
  at oracle.as.jmx.framework.generic.spi.interceptors.DefaultMBeanInterceptor.internalPostRegister(DefaultMBeanInterceptor.java:87)
  at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doPostRegister(AbstractMBeanInterceptor.java:204)
  at oracle.security.jps.ee.jmx.JpsJmxInterceptor$4.run(JpsJmxInterceptor.java:605)
  at java.security.AccessController.doPrivileged(Native Method)
  at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)
  at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:464)
  at oracle.security.jps.ee.jmx.JpsJmxInterceptor.internalPostRegister(JpsJmxInterceptor.java:622)
  at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doPostRegister(AbstractMBeanInterceptor.java:204)
  at oracle.as.jmx.framework.generic.spi.interceptors.DefaultMBeanInterceptor.internalPostRegister(DefaultMBeanInterceptor.java:87)
  at oracle.as.jmx.framework.generic.spi.interceptors.ContextClassLoaderMBeanInterceptor.internalPostRegister(ContextClassLoaderMBeanInterceptor.java:167)
  at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doPostRegister(AbstractMBeanInterceptor.java:204)
  at oracle.as.jmx.framework.generic.spi.interceptors.DefaultMBeanInterceptor.internalPostRegister(DefaultMBeanInterceptor.java:87)
  at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doPostRegister(AbstractMBeanInterceptor.java:204)
  at oracle.as.jmx.framework.standardmbeans.spi.OracleStandardEmitterMBean.postRegister(OracleStandardEmitterMBean.java:521)
  at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.postRegister(DefaultMBeanServerInterceptor.java:1024)
  at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerDynamicMBean(DefaultMBeanServerInterceptor.java:974)
  at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerObject(DefaultMBeanServerInterceptor.java:900)
  at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerMBean(DefaultMBeanServerInterceptor.java:324)
  at com.sun.jmx.mbeanserver.JmxMBeanServer.registerMBean(JmxMBeanServer.java:522)
  at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$27.run(WLSMBeanServerInterceptorBase.java:714)
  at java.security.AccessController.doPrivileged(Native Method)
  at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.registerMBean(WLSMBeanServerInterceptorBase.java:709)
  at weblogic.management.mbeanservers.internal.JMXContextInterceptor.registerMBean(JMXContextInterceptor.java:445)
  at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$27.run(WLSMBeanServerInterceptorBase.java:712)
  at java.security.AccessController.doPrivileged(Native Method)
  at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.registerMBean(WLSMBeanServerInterceptorBase.java:709)
  at weblogic.management.jmx.mbeanserver.WLSMBeanServer.registerMBean(WLSMBeanServer.java:462)
  at oracle.as.jmx.framework.wls.spi.security.PrivilegedMBeanServerInterceptor$1.run(PrivilegedMBeanServerInterceptor.java:55)
  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
  at oracle.as.jmx.framework.wls.spi.security.PrivilegedMBeanServerInterceptor.registerMBean(PrivilegedMBeanServerInterceptor.java:60)
  at oracle.adf.mbean.share.connection.ADFConnectionLifeCycleCallBack.contextInitialized(ADFConnectionLifeCycleCallBack.java:111)
  at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:481)
  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
  at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:181)
  at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1871)
  at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3173)
  at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1527)
  at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:486)
  at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
  at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
  at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
  at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
  at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
  at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
  at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
  at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:671)
  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
  at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
  at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
  at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
  at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:80)
  at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:187)
  at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:379)
  at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
  at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
  at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
  at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:261)
  at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:220)
  at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
  at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
  at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
  at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
  at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:263)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

    OID contains all users belonging to a group and can be viewed correctly using DOHAD.

    Users cannot connect to the portal WebCenter or any other application of the field gets initialized because JPS store does not.

    However, the JPS store gets initialized for the administration server, users and group membership can be toured from the areas of security-> users and groups to the weblogic console window.

    A few days ago the users connected to the webcenter content was not asigned no role.

    WebCenter star in the field of content very well, Admin Server and store of JPS is initialized correctly, users and members of the group can be seen in areas of security-> users and groups to the weblogic console window.

    WCP-weblogic_usersandgroups.png

    This error started to appear a few days before, before that, everything was normal, and users could connect to the webcenter portal group for membership and get the OID and the privileges of JPS LDAP store.

    Servers werer started first, using Nodemanager script to start the server administration, and after that the administrator of the booted server, console weblogic was used to start managed servers.

    Is there a way to debug the JPS Store initialization?

    Hello Amey

    The indicator for OAM ID Asserter is required for single sign on functionality, whatever it is, the problem, seems to be communication with the DNS server, which makes a delay that could be verified using traceroute and ping commands.

    This delay caused the connection failure to the OID server during initialization of JPS.

    As a solution, thefully qualified hostname to OID server has been configured manually to the file/etc/hosts. After this change, JPS can be initialized correctly.

    Howerver, that the log shows no time-out or any other exception during the initialziation, making diagnosis difficult to obtain.

    Thanks for your help.

  • JPS-01520 - cannot initialize the identity store, cause: unable to connect to the directory. Check configuration information...

    WebCenter content 11.1.1.8.7 has been installed on a single node and configured by using the security provider of external JPS using OID 11.1.1.7

    JPS_store_config.png

    WebCenter content area uses OAM 11 GR 2 as a single sign on the mechanics and the DIO as authentication providers

    Auth_providers.png

    OID contains all users belonging to a group and can be viewed correctly using DOHAD.

    ODSm_userBrowse.png

    A few days ago the users connected to the webcenter content was not asigned no role.

    WebCenter star in the field of content very well, Admin Server and store of JPS is initialized correctly, users and members of the group can be seen in areas of security-> users and groups to the weblogic console window.

    weblogic_usersandgroups.png

    However, when starting a webcenter content managed server, the following message appears:

    <JPS-01520> <Cannot initialize identity store, cause: Failed to connect to directory. Check configuration information..>

    And users get only the default authenticated roles.

    weblogic_ecm-UserRoles.png

    Where he should have been granted the role administrators ECM, sysadmin and admin role, because of the map of credentials configured in webcenter content server

    Content_credentialmap.png

    In the providers section, JpsUserProvider is down

    Content_jpsproviderdown.png

    and using the test function, the following error displays to webcenter content records:

    <Oct 23, 2015 11:48:41 AM COT> <Error> <oracle.ucm.idccs> <UCM-CS-000001> <general exception> 
<Oct 23, 2015 11:48:41 AM COT> <Error> <oracle.ucm.idccs> <UCM-CS-000001> <general exception
intradoc.common.ServiceException: !csJpsIdentityStoreNotConfigured
        at idc.provider.jps.JpsUserProvider.testConnection(JpsUserProvider.java:941)
        at intradoc.server.proxy.ProviderStateUtils.testConnection(ProviderStateUtils.java:66)
        at intradoc.server.ProviderManagerService.testProvider(ProviderManagerService.java:128)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:597)
        at intradoc.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:87)
        at intradoc.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:310)
        at intradoc.common.ClassHelperUtils.executeMethod(ClassHelperUtils.java:295)
        at intradoc.server.Service.doCodeEx(Service.java:640)
        at intradoc.server.Service.doCode(Service.java:595)
        at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1693)
        at intradoc.server.Service.doAction(Service.java:566)
        at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1483)
        at intradoc.server.Service.doActions(Service.java:562)
        at intradoc.server.ServiceRequestImplementor.executeActions(ServiceRequestImplementor.java:1415)
        at intradoc.server.Service.executeActions(Service.java:547)
        at intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.java:751)
        at intradoc.server.Service.doRequest(Service.java:1976)
        at intradoc.server.ServiceManager.processCommand(ServiceManager.java:487)
        at intradoc.server.IdcServerThread.processRequest(IdcServerThread.java:265)
        at intradoc.idcwls.IdcServletRequestUtils.doRequest(IdcServletRequestUtils.java:1358)
        at intradoc.idcwls.IdcServletRequestUtils.processFilterEvent(IdcServletRequestUtils.java:1732)
        at intradoc.idcwls.IdcIntegrateWrapper.processFilterEvent(IdcIntegrateWrapper.java:223)
        at sun.reflect.GeneratedMethodAccessor219.invoke(Unknown Source)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:597)
        at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:88)
        at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)
        at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)
        at idcservlet.ServletUtils.executeContentServerIntegrateMethodOnConfig(ServletUtils.java:1680)
        at idcservlet.IdcFilter.doFilter(IdcFilter.java:457)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:61)
        at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
        at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)
        at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)
        at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
        at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
        at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:61)
        at oracle.security.wls.filter.SSOSessionSynchronizationFilter.doFilter(SSOSessionSynchronizationFilter.java:419)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:61)
        at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:163)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:61)
        at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
        at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)
        at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)
        at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
        at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
        at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:61)
        at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3748)
        at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3714)
        at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
        at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
        at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2283)
        at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2182)
        at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1495)
        at weblogic.work.ExecuteThread.execute(ExecuteThread.java:263)
        at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

    This behavior also affects SOA managed server and managed servers of the WebCenter Portal

    The servers were turned on in the right order, the first Management Server, then content managed server

    Is there a way to diagnose the reason why JPS security provider cannot be initialized?

    The problem seems to play with communication with the DNS server, which makes it a delay on the resolution for entry to the OID server host name, this could be verified using traceroute and ping commands.

    This delay caused the connection failure to the OID server during initialization of JPS.

    As a solution, fully qualified for OID server host name has been configured manually to the file/etc/hosts. After this change, JPS can be initialized correctly.

    Howerver, that the log shows no time-out or any other exception during the initialziation, making diagnosis difficult to obtain.

    Thanks for your help.

  • Try to upgrade to Windows 7 Home Premium and can't get past the blue screen upgrade now

    Try to run the upgrade to WIndows 7 home premium to clean virus problems. have tried for days, unable to get past the blue screen upgrade now.

    If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

  • Unable to get the upgrade to Windows 7 purchased to start

    I bought an upgrade to a provider. I have acquired a product key. I invoke Windows Anytime Upgrade according to the directions and the only option is to upgrade to Vista. Then I went to the Microsoft page to buy the product. I have Vista 64-bit with all updates installed on my Toshibe Satellite computer. I ran the Upgrade Advisor and everything was satisfactory.

    Unable to get the upgrade to Windows 7 purchased to start

    I call Windows Anytime Upgrade according to the guidelines

    I have Vista 64-bit

    Windows 7 anytime upgrade: you have Vista or XP currently installed?

    If the product you have Windows 7 'Anytime Upgrade' does not allow to move from XP/Vista to Windows 7. You can buy the product at retail of Windows 7 Upgrade not the ' Anytime Upgrade '.

    Windows 7 'Anytime Upgrade' is for moving from one version of Windows 7 to a higher version, such as Windows 7 Home Premium to Windows 7 Professional.

    You can buy Windows 7 here:

    http://www.microsoftstore.com/store/msstore/cat/CategoryID.44066700

  • XT720: Unable to connect to the network for upgrades

    Hello

    I recently had a new Motorola Milestone XT720. I tried to get the software updates using the "connection to phone" functionality system updates. If I connect my phone via the network or via WiFI, I get this message "the device is unable to connect to the server, please try again later"

    How can this problem be solved?

    How to get the system through files zip for Android updates?

    Kindly let me know.

    It is not uncommon to get this message when checking for OTA updates - update servers seem to be pretty random that they are actually on and accessible, or not.

    Your best bet for checking updates is to use the Motorola (MSU) software update. Search on a site of Motorola to find. It is a windows program that will check updates for your phone. More updates appear here before OTA (if they are already on OTA)

Maybe you are looking for

  • Equium A100: Cannot install Virtual Sound & Power Saver error (0x3F0)

    Hi all I brought a new SATELLITE A100 series laptop, during the configuration and installation of new soft, I find myself with that. 1. I am able to install the Toshiba Virtual Sound, it gives error on install start-> "Toshiba Sound only is not suppo

  • How can I cancel this terminal command?

    I entered the following command in a terminal with the understanding that it would help me stop MacKeeper ads popping up because it looks like youtube I was using safari but on a Windows System. Who had the unexpected result of not being able to use

  • Disable mobsync?

    Is there a way to disable mobsync to my startup?  I have no mobile device I synchronize then it's just to take place ram running on the taskbar.  I looked into msconfig and it isn't here.  I am constantly going to Task Manager and end the task.  It w

  • ACL configuration to block messenger

    Hello I have Model: SRP527W, ADSL2 + annexed, 802.11n ETSI, 2FXS/1FXO Product ID: SRP527W-U-E-K9 I need to block Yahoo and MSN messenger by using advanced firewall or ACL. Thank you Simon Yee

  • Minerals of Agile conflicted PG &amp; C module

    We have so far only used PG & C for RoHS and RoHS rollup. We use statements of homogeneous materials in this process. How can I configure Agile PG & C for tracking conflict minerals?