getStage() during initialization

Hello
When I try to write code like:

@FXML
Node node

@Override
public void initialize(URL url, ResourceBundle rb) {
   node.getStage();
}

I get a SEVERE: java.lang.NullPointerException.

So, how can I get the steps during initialization?

Thank you

   primaryStage.focusedProperty().addListener(new ChangeListener() {

            @Override
            public void changed(ObservableValue ov, Boolean t, Boolean t1) {
                System.out.println("focused? " + t1);
            }
        });

There is no CSS for internship or scene window.

Tags: Java

Similar Questions

How Firefox 4.0.1 can start a profile during initialization without typing "firefox.exe - ProfileManager"?

How can I get Firefox 4.0.1 to load a profile during initialization without typing "firefox.exe - ProfileManager"?

Firefox 3.6.12 would pause during initialization to ask which profile to load.

I want to install various plug-ins on different profiles for evaluation.

You can use the short form firefox.exe-p for get profile manager.

Simplest is to create a shortcut on the desktop to start the Profile Manager, or create a shortcut of s for each profile if you don't have a small number.

DESIGNJET T2300 STUCK at 94% during initialization

HI, my DESIGNJET T2300 STUCK at 94% during initialization. Anyone know what I can do to make it take off?

Here's something that might work. Remove the loaded paper. Remove all the ink cartridges and print heads. Now, turn on the printer and see if it get to the place where it asks to install some of these supplies.

Error occurred during initialization of MAPI

I'm trying to move my messages OE 6 from one PC to another. When I click on file / export / Messages, I get the following message: "export could not be performed. An error occurred during initialization of MAPI. "How can I solve this problem or move my messages and folders to another PC?

Thank you

John (jbacinti)

Hello

You can check this link:

MAPI error messages when you import or export messages in Outlook Express

The export could not be performed. An error occurred during initialization of MAPI

I need to import e-mail messages and settings of Outlook Express 6 on Windows XP SP2 to Windows Live Mail on a new Windows 7 PC.

I try to export messages from Outlook Express, but I get a message saying that "the export cannot be performed. An error occurred during initialization of MAPI".

I changed the Outook Express settings as described in section http://support.microsoft.com/kb/179637/en-us (method 2), but the message remains and I can't continue.
- How can I go on the export of messages?
- Can I copy the .dbx files and import them into Windows 7?
- Is there an alternative?
Outlook is not installed on my PC I want to install it either.

Concerning

Mario

The export is only if you have installed Exchange or Outlook. Copy the entire repertoire of dbx files to the Win7 computer desktop and make sure that the files are not read-only. Then, in WLM use file | Import | Messages and point to this directory.

Steve

wrote in message News: * e-mail address is removed from the privacy *...

I need to import e-mail messages and settings of Outlook Express 6 on Windows XP SP2 to Windows Live Mail on a new Windows 7 PC.

I try to export messages from Outlook Express, but I get a message saying that "the export cannot be performed. An error occurred during initialization of MAPI".

I changed the Outook Express settings as described in section http://support.microsoft.com/kb/179637/en-us (method 2), but the message remains and I can't continue.
- How can I go on the export of messages?
- Can I copy the .dbx files and import them into Windows 7?
- Is there an alternative?
Outlook is not installed on my PC I want to install it either.

Concerning

Mario

Need help with my Mail window. I can't export my message to the PST format. I keep getting the message error "an error occurred during initialization of MAPI".

Hello

Need help with my Mail window. I can't export my message to the PST format. I keep getting the message error "an error occurred during initialization of MAPI". Y at - it solution or another method?

Hi ErikLee,

Do you have MS Outlook installed on your computer?

Windows mail import and export opportunities are limited to an Outlook .pst file or an Exchange Server mailbox. They are available only if MS Outlook is installed.
If MS Outlook is not installed and you start an import or export action, the necessary support files are not present for Windows mail complete the operation. Then I suggest you to install Outlook temporarily and see if the problem is resolved.

Follow the instructions below and check if the problem is resolved.

1. reboot your computer, and then start Windows Mail.
2. on the Tools menu, click Options.
3. in the connection tab, click on edit to open the Internet Properties dialog box.
4. in the tab programs, click on an application other than Windows mail e-mail in the e-mail list. Click on apply and then click OK.
5. click OK again to close the Options dialog box.
6. exit Windows mail and restart Windows mail.

If this does not work, I suggest you upgrade to Windows Live Mail to import or export messages that may help you resolve the issue.

To download Windows Live Mail, visit the following Microsoft Web site:
http://get.live.com/wlmail/overview

For more information about Windows Live Mail, see the Microsoft Web site at the following address:
http://windowshelp.Microsoft.com/Windows/en-us/help/4b30d3d6-abe2-46d1-a5fd-4a1ba786a1381033.mspx

Check whether the problem is resolved.

Please post back and let us know if it helped to solve your problem.

Kind regards
KarthiK TP

Failed to load existing records from the database on SD card during initialization of the application

When the Simulator is launched upward, not able to load existing records from the database in the Inbox, so no records appear in the Inbox even though they exist in the database. It seems to be a problem with the SD card in the Simulator - the file system for the SD card is not correctly initialized when the application starts first to the top. During initialization of the application tries to access the SD card by using the following code.

Boolean

sdCardPresent = false;

Enumeration e = FileSystemRegistry.listRoots ();

If

(e! = null) { }

While (e.hasMoreElements ()) {}

root = (String) e.nextElement ();

If

(root.equalsIgnoreCase("SDCard/")) {

sdCardPresent =

true;

}

}

}

sdCardPresent is always set to false and was not able to access existing records from the database. Once the application is initialized and try to create the database, the database is created successfully on the SD card. The code is the same as above when creating the database and was able to do sdCardPresent = true.

Is there anyway to register or add the SD card during initialization of the application or any property as System.setProperty overide the path of the default directory value?

I use BlackBerry 9550 Simulator. I checked the "file system using PC for files from the SD card" and I use "C:\bb\SDCard" for the file system of thr.

Also tested on the BlackBerry and found the same thing, if the device is hard reset, then it not reading the SD card as well.

Mark the thread as solved then.

Service error battery Bluetooth connection problem and "Bluetooth Control: an error occurred during initialization of this operation." Try restarting your computer or bluetooth device ".

Original title: Bluetooth connection problem

I have a bluetooth Jawbone headset which worked fine with my Dell studio 1458 until a month or two ago. I am running windows Home premium 64-bit. Now the device will connect is more to the laptop. I get an error to the stack service and "Bluetooth Control: an error occurred during initialization of this operation." Try restarting your computer or bluetooth device"I returned to you can restore point, but the issue is not resolved. All solutions?

Hi Trainfan1,

· Did you do changes on the computer before the show?

Follow these methods.

Method 1: Run the tool and troubleshooting hardware devices.

Method 2: Check the drivers and the Bluetooth Support service.

(a) click Start, type services in start search box and press enter.

(b) Services for window open find Bluetooth Support Service and double-click it.

(c) ensure that the service is both the value Automatic for Startup type and started for the State.

(d) click Start, type Device Manager in the start search box and press enter.

(e) to search for the Bluetooth device expand it and double click on the driver.

(f) go to the tab driver and click set to update driver to update the drivers.

(g) if the problem is still even try to Uninstall and reinstall the drivers in the same tab by clicking on the option Uninstall .

Method 3: Remove all Bluetooth components and reinstall it from the manufacturer's Web site.

Install all necessary software required for Bluetooth device work properly.

First construction of DEFAULT DOMAIN for "Integrated Weblogic Server" in jDeveloper 12 c gave ERROR: wlst > error occurred during initialization of the virtual machine;

Hi my community developers estimated!
I just installed Oracle jDeveloper 12 c as part of the new version BPM Suite 12 c successfully on my LAPTOP.
However, when I try to create the first integrated default for the weblogic Server domain to run by using the database of embedded JAVA (do NOT use an external Oracle DB) - I get the following error in the log below:
QUESTION - how/where can I change the ' USER_MEM_ARGS = - Xms32m -Xmx1024m' specification in jDeveloper, to allow a smaller 'MAX MEMORY setting, instead of Xmx1024m"since I DO NOT have enough memory (virtual) on my laptop to create the default domain.
Thank you very much!
Please see from the log of the errors below:
Add the environment variable to WLST script = - Xms32m USER_MEM_ARGS - Xmx1024m - XX: MaxPermSize = 384 m
Log file: D:\data\859442303\Application Data\JDeveloper\system12.1.3.0.41.140521.1008\o.j2ee.adrs\BuildDefaultDomain.log
Label: JDEVADF_12.1.3.0.0_GENERIC_140521.1008.S
Home product: C:\Oracle\Middleware\Oracle_Home\jdeveloper\jdev\
Area: D:\data\859442303\Application Data\JDeveloper\system12.1.3.0.41.140521.1008\DefaultDomain
2014 BuildDefaultDomain2.py - 07-04 18:00:03
cmd.exe /c "" C:\Oracle\Middleware\Oracle_Home\oracle_common\common\bin\wlst.cmd""D:\data\859442303\Application Data\JDeveloper\system12.1.3.0.41.140521.1008\o.j2ee.adrs\BuildDefaultDomain2.py""
Process began
WLST > error occurred during initialization of VM
WLST > could not reserve enough space for lots of things
WLST > error: could not create the Virtual Machine Java.
WLST > error: a fatal error has occurred. Program ends.
Elapsed time: 437 ms

Thanks James, I changed the memory allocation in the WLST script and I no longer get the VM error

error occurred during initialization of workspace ES2:

Hello
I installed the trial version of the ES2. Workbench, /AdminUI, and readerextenstions console properly. But when I logged in workspace ES2, I got the login screen. But the error appears when I try login 'an error occurred during initialization of workspace.
How to solve this problem?
Thank you
KC

You can get a trial of Adobe site free key!

Kind regards

Nith

Exception during initialization of Lecroy Ivi driver using c#

Hello!

We bought a Lecroy WaveRunner 64MXI-a and tried to control remotely, we have already created a resource of Visa using MAX, tested using the Panel to test VISA and everything seemed ok, we interviewed without problem.

The problem came when we downloaded and installed the driver of the ivi of lecroy http://teledynelecroy.com/support/softwaredownload/labview.aspx, we have added references as literature has declared and initialized in this way using c#.

Mylec ILeCroyScope = new LeCroyScopeClass();
MYLEC. Initialize ("TCPIP0::LCRY0621N67647:inst0:INSTR", false, false, "simulation = false");

It throws the following exceptionSystem.Runtime.InteropServices.COMException Exception de HRESULT: 0x8000FFFF (E_UNEXPECTED).

that the exception is not thrown when we simulate = true. And we already tested it using a session simple message in function, but no luck with the ivi driver.

Has anyone encountered this problem and found a solution? any help is useful, thank you.

PD: I have already contacted lecroy but no response atm, I'm looking for advice here.

Hello Nelson.

Just a tip, I just send you an email response to your support request by email TeledyneLeCroy.

Table of only clusters during initialization or Possible Race Conditions

Hi all

I worked on a fairly complex project for work, and I have not worked with before Labview. Unfortunately, nobody in my office really has experience with it so I'm on my own. I especially the working draft and it might be a little heavy, but if it works it is fine.

Essentially, it is a temperature control device and I made sure it's extensible, so the bunches and berries everywhere.

My question is this. I have an array of clusters showing the status of all the plates in the system. When I start the VI for the first time, they did not initialize. They are still just Gray, but when I stop and start again, it will work every time. I think it's strange behavior. I heard racing conditions and while I tried to make sure that c ELA is not the case, he could be without noticing me.

I tried to put a table initialize block in the first call while loop and that does nothing, and if I remove the initializer in the registry to offset in the while loop top which stops them being initalized altogether.

I guess I was hoping someone might have an idea of what is the cause, or could possible give my code the time. The gist of it is at the top of the code, but there are many small manifestations taking care of type GUI stuff.

I have included all the source code. It might be a bit much, but I didn't start shooting it hand if I don't know what is happening.

Thanks in advance.

Chris.

LaserJet Pro m177fw loud rattling and then is blocked during initialization, will not print

Hello

This printer has delivered today, it looks awesome, but when I turn it on, it was a rattling noise (as something to try to turn it on, but do not attract a gear or something on the inside, this happens immediately to market, and then he's stuck in the initialization. If I go to the home button and go to configuration, then reports and report configuration panel, I get a big green check mark. I noticed that on the menu item straighter, there is a yellow warning, and it doesn't seem to be able to get details on the color ink levels. I took the ink cartridge and looked at him and it looks like there is not something to activate the cartridge (it was in my very old HP Laser jet).

What Miss me on the installer? I read the instructions twice and also hard to put off the printer by pulling on the plug and wait a minute to plug it back in. Same thing happens, thank you!

Sean

Well Yes, I found it, but then he touches, the printer goes just to 'initializing' to "xx_color_xx forward movement", well, nothing moves, it stays like this all night.

So here's the answer. After spending over 2 hours with tech support, they concluded that the faulty unit. Unfortunately the HP support could only charge me $10 to replace, so I had to call the store (which oddly enough was also HP, which means that the display of the organizational structure of HP for me.) ), I had to remind HPShopping.ca and get them to replace it. I get a label shiping and will send it back and get a new one.

Thanks to those that Chorus and helped. Appreciate the efforts with the community forums!

during initialization

I have printer HP laser jet MFP M127 fw, running with Windows 7 Edition home premium. When the printer starts, it often to keep the initialization and stuck to the initialization and never return to the main screen until I have to turn off and on the printer. Please help me solve this problem. Thank you

Hi the hptn,

Thank you for the information.

It excludes many of the issues were able to be . What is good.

On this basis, it is more than probably a small problem with power/firmware.

#1 here is to make sure that the printer is connected directly to a wall outlet. (He built in the surge protector).

After that you will need a USB cable, I want to update the printers Firmware. (It's just safer to do it with a USB cable).
This link will guide you through the update: get the latest Firmware and product updates.
* Note * make sure that the printer is not in the initialization state when you do this so far.

Finally, I sent you a private message with a last step to do.

Please let me know how everything goes, and I thank you for the answer.

2960 X accident during initialize with error ASIC/PHY POST failed

I already format flash and download ios to pass, but when I boot it. It is still a loop and still start. me error indicating: ASIC/PHY POST failed. Cannot continue.

Loading of 'flash:/c2960x-universalk9-mz.150-2a.EX5.bin '... Verifying image flash:/c2960x-universalk9-mz.150-2a.EX5.bin....................................................................................................................................................................................................................................................................................... Digital signature verification image
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
'Flash:/c2960x-universalk9-mz.150-2a.EX5.bin' file, unzipped and installed, point of entry: 0 x 3000
execution of...

Legend restricted rights

Use, duplication, or disclosure by the Government is
subject to such restrictions as set out in paragraph
(c) Commercial - limited computer software
The rights to FAR clause 52.227 - 19 and subparagraph s
(c) (1) (ii) rights to technical and computer data
Clause of DFARS 252.227 - 7013 section software.

Cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706

Cisco IOS software, C2960X Software (C2960X-UNIVERSALK9-M), Version 15.0 EX5 (2A), VERSION of the SOFTWARE (fc3)
Technical support: http://www.cisco.com/techsupport
Copyright (c) 1986-2015 by Cisco Systems, Inc.
Updated Tuesday, February 16, 15 08:16 by prod_rel_team
Wire HULC:Collect entropy from on the box...
Initialization of flashfs...
With the help of the driver version 3 for the type of media 1
MIF [7]: 10 files, directories 1
MIF [7]: Total number of bytes: 1806336
MIF [7]: bytes used: 690688
MIF [7]: available bytes: 1115648
MIF [7]: fsck MIF took 1 seconds.
MIF [7]: initialization complete.

MIF [8]: 1 files, directories 1
MIF [8]: Total number of bytes: 3870720
MIF [8]: bytes used: 971264
MIF [8]: available bytes: 2899456
MIF [8]: fsck MIF took 0 seconds.
MIF [8]: initialization complete.

MIFID [9]: 5 files, directories 1
MIFID [9]: Total number of bytes: 258048
MIFID [9]: used bytes: 8192
MIFID [9]: available bytes: 249856
MIFID [9]: fsck MIF took 1 seconds.
MIFID [9]: initialization complete.

MIF [10]: 5 files, directories 1
MIF [10]: Total number of bytes: 258048
MIF [10]: used bytes: 8192
MIF [10]: available bytes: 249856
MIF [10]: fsck MIF took 0 seconds.
MIF [10]: initialization complete.

MIF [11]: 8 files, 2 folders
MIF [11]: Total number of bytes: 122185728
MIF [11]: bytes used: 20221952
MIF [11]: available bytes: 101963776
MIF [11]: fsck MIF took 1 seconds.
MIF [11]: initialization complete.

.. initialization flashfs .done.

FIPS: Flash control keys: start
FIPS: Flash control key: end, not found, not activated the FIPS Mode

MESSAGE: MY BIST: start
MESSAGE: MY BIST: end, the adopted status

MESSAGE: AAGR BIST: start
MESSAGE: AAGR BIST: end, the adopted status

MESSAGE: 2 authentication: start
MESSAGE: 2 authentication: end, the adopted status
extraction of front_end/front_end_ucode_info (43 bytes)
Waiting in the elections of the Stack Master...
MESSAGE: Heat, fan Tests: start
MESSAGE: Heat, fan Tests: end, the adopted status

MESSAGE: PortASIC battery Port Loopback Tests: start
MESSAGE: PortASIC battery Port Loopback Tests: end, the adopted status

POST: PortASIC Port loopback Tests: start
MESSAGE: Failed Test Packet PortPhyLoopback asic_index 1 port_hardware_index 4
POST: PortASIC Port loopback Tests: end, the State has failed

Error: Failure of the ASIC/PHY POST. Cannot continue.

Software-forced % recharge

01:56:40 UTC Friday, August 12, 2016: an unexpected exception at CPUvector 2000, PC = 2714308
-Traceback = 0x2714308z 0x27142A0z 0x1F905C0z 0x1B1E0ECz 0x1B1E2BCz 0x1B1E414z 0x43FE38z 0x4400A8z 0x27158E8z 0x270F928z

Writing to Flash crashinfo: / crashinfo_ext/crashinfo_ext_8

01:56:43 UTC Friday, August 12, 2016: an unexpected exception at CPUvector 2000, PC = 1 B 68830
-Traceback = 0x1B68830z 0x270F928z 0x27158E8z 0x270F928z

= Posts from Flushing (01: 56:43 UTC Friday, August 12, 2016) =.

Buffering of messages:
Messages in queue:
12 August 01:56:43.970: % SYS-3-LOGGER_FLUSHING: System to stop to ensure console debugging output.

* 00:00:14.753 Mar 1: reading env - LICENSE_BOOT_LEVEL = variable
30 Mar 01:27:38.150: % IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: name of the Module = restart level according to lanbase and License = lanbase = c2960x_lanbase
12 August 01:55:52.775: switch 0. Can not read the nest of the Flexstack module

Cisco IOS software, C2960X Software (C2960X-UNIVERSALK9-M), Version 15.0 EX5 (2A), VERSION of the SOFTWARE (fc3)
Technical support: http://www.cisco.com/techsupport
Copyright (c) 1986-2015 by Cisco Systems, Inc.
Updated Tuesday, February 16, 15 08:16 by prod_rel_team

Debug exception (might be dereferencing NULL pointer) Exception (0 x 2000)!
SRR0 = 0X02025C98 = 0 00029200 = 0 02714308 SRR3 X SRR2 X SRR1 = 0 X 00029200
ESR = 0 X 00000000 DEAR = 0X98173A49 = 0 X = 0 X 01000000 DBSR 84000000 TSR

CPU register context:
Vector = 0 x 00002000 PC = 0 x 02714308 MSR = 0 x 00029200 CR = 0 x 28000082
LR = 0X027142A0 CTR = X 0 X 00418528 = 0 X 40000077
R0 = R1 = R2 0X04B1D9F8 0X027142A0 = 0 X 00000000 R3 = 0X0356A340
R4 = 0X00000000 0X00000000 0X00000000 R7 = R6 = R5 = 0 X 00000025
R8 = 0X00000000 R9 = 0X038A0000 R10 = 0X04B1DC3C R11 = 0 X 00000000
R12 = 28000088 R13 = 0X1F1828CC R14 = R15 0 X 00440048 X 0 = 0 X 00000000
R16 = R17 = R18 = R19 0X00000000 0X00000000 0X00000000 = 0 X 00000000
R20 = R21 R22 R23 0X00000000 = 0X00000000 = 0X00000000 = 0 X 00000000
R24 = R25 = R26 = R27 0X00000001 0X00000000 0X00000000 = 0 X 00000002
R28 = R29 = R30 R31 0X04B1DA28 = 0X00000000 0X037FFAA4 = 0 X 00000000

Stack trace:
PC = 0 X 02714308, SP = 0X04B1D9F8
Section 00: SP = 0x04B1DA08 PC = 0x027142A0
Section 01: SP = 0x04B1DA20 PC = 0x021AB31C
Section 02: SP = 0x04B1DA80 PC = 0x01F905C0
Section 03: SP = 0x04B1DA90 PC = 0x01B1E0EC
Section 04: SP = 0x04B1DAB0 PC = 0x01B1E2BC
Section 05: SP = 0x04B1DAC8 PC = 0x01B1E414
Section 06: SP = 0x04B1DAF8 PC = 0x0043FE38
Section 07: SP = 0x04B1DC00 PC = 0x004400A8
Section 08: SP = 0x04B1DC08 PC = 0x027158E8
Section 09: SP = 0 x 00000000 PC = 0x0270F928

The availability of switch is 1 minute, 10 seconds

WS processor - C2960X - 24TS - L (APM86XXX) Cisco (G0 revision) with K 524288 bytes of memory.
Card processor ID FCW1850A1GN

CPU Rev: B
Digital signature verification image
Rev Board: 18
DataBus test...
Tests AddressBus...
Test memory of 0x00000000 to 0x1fffffff.../
With the help of the driver version 4 for the type of media 1
XMODEM file system is available.
Basic Ethernet MAC address: c4:72:95:06:55:80
Password recovery mechanism is activated.
EHCI USB 1.00
EHCI USB 1.00
Console USB INIT
Initializing the Flash...
MIF [5]: 10 files, directories 1
MIF [5]: Total number of bytes: 1806336
MIF [5]: bytes used: 690688
MIF [5]: available bytes: 1115648
MIF [5]: fsck MIF took 1 seconds.
MIF [6]: 1 files, directories 1
MIF [6]: Total number of bytes: 3870720
MIF [6]: bytes used: 971264
MIF [6]: available bytes: 2899456
MIF [6]: fsck MIF took 1 seconds.
MIF [7]: 5 files, directories 1
MIF [7]: Total number of bytes: 258048
MIF [7]: used bytes: 8192
MIF [7]: available bytes: 249856
MIF [7]: fsck MIF took 0 seconds.
MIF [8]: 5 files, directories 1
MIF [8]: Total number of bytes: 258048
MIF [8]: used bytes: 8192
MIF [8]: available bytes: 249856
MIF [8]: fsck MIF took 0 seconds.
MIFID [9]: 9 files, 2 folders
MIFID [9]: Total number of bytes: 122185728
MIFID [9]: bytes used: 20485120
MIFID [9]: available bytes: 101700608
MIFID [9]: fsck MIF took 23 seconds.
.. .done flash initializing.
Loading of ' c2960x-universalk9-mz.150-2a.EX5.bin"...c2960x-universalk9-mz.150-2a.EX5.bin: no such device".

Error loading "c2960x-universalk9" - mz.150 - 2A .ex5 .bin

You really have to RMA it then as something very probably disappeared in just ASIC because it States software force reload it could still be a hardware problem and the fact that you have had the correct steps to put a new IOS on it first proves its not ISO as the cause

getStage() during initialization

Similar Questions

Maybe you are looking for