Static IP remote access for the media center

I NMH410 work through a WRT610N router.   My ports are configured for static IP access.  Seems to just going through www.ciscomediahub.com does not work well for me.

Can someone provide the 'exact' URL I would enter in order to access my media center?

Documentation of assistance through Cisco shows: https://Wan_IP_Address but that doesn't seem to work.  The demand is just there and finally once outside.

To everyone:

Apparently, I discovered and corrected the problem that I had with 'Remote access' to my Media Hub.

Somehow, there are two configurations of router that had to be done.  On two port forwarding configurations has been necessary and once allowed me to access the media center.

It seems that my ISP has a 192.168.x.x address router that was different from the address of my router 192.168.x.x.  It is on the home router when I incoming and make changes to the information of port forwarding.  The fact that I was getting an error message indicating that I wasn't even reached my router alerted me to the fact that my ISP was blocking remote access.  In the end, that's where my problem was discovered.

Translate:

If you have problems to access your media "at a distance" pole through its IP address (and not by the cisco media center), make sure that you configure the ports of the router specified by your Internet provider address, as well as the ports of the router that you have on your network home.

I have forwarded port 443 on the two addresses of router port, and I can now access my media hub remotely.  Now if I can't play videos remotely, I'll be set.  This leads to another problem that I'll send it in another thread.

Thanks for the help and suggestions of each.

Tags: Linksys Media

Similar Questions

  • Just upgraded to Vista Home Premium to XP. Got a Packard Bell with RF for the Media Center remote control, worked fine with XP, but is no longer compatible with Vista.

    after update to XP media center units Vista remote control

    Just upgraded to Vista Home Premium to XP.  Got a Packard Bell with RF for the Media Center remote control, worked fine with XP, but is no longer compatible with Vista.  I checked the usb driver for the usb XF-10 rf remote receiver and it is fine, uninstalled and reinstalled it.  Handset was working fine a few days ago.  I also went in 'Administrator', 'services' and then active HID, but it still does not work.  Media works well, but it would be nice to have the operation of the remote control!  Not particularly computer, simply suggestions please!  Thank you, Nick.

    Hi Nicolas,

    I suggest you to check the battery. Additionally, make sure that you have installed the right drivers for you Consumer IR Port.

    For more information, you can check the link below,

    http://www.PackardBell.com/index.html

  • How to change for the Media Center guide download time?

    How can I change the Media Center program guide download time?  My computer comes out of hibernation to download data at 12:15 and to sit down again it idling (for several hours) until she was put into hibernation or stop.  There is a utility that will change in time, but time is always changed back to the time of 12: 00.  I guess MC changes the time of return.  Thanks in advance.

    Hello

    You can follow the links below and try the advice given to solve the problem.

    http://Windows.Microsoft.com/en-us/Windows-Vista/download-updated-Guide-listings-in-Windows-Media-Center

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-guide-downloading-problems-in-Windows-Media-Center

    http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-Guide-listings-for-use-in-Windows-Media-Center

    Choose the manual option down and check if that helps.

    Hope this information is useful.

    Amrita M

    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Why did I lose the mouse in the onfull for the media center screen

    When I enlarge to full screen in windows media center I lose the mouse.

    Hi William,.

    Please provide answers to the following questions.

    1. what operating system you are using on the computer?

    2. are you aware of any material changes or software that have been made before the show?

    3. for how long are you facing this problem? If it works well before?

    Method 1: Enable and disable Windows Media Center

    Turn off:

    a. Select the button 'Start', then clicking on the "Control Panel".

    b. Select the menu "Programs" and then "Turn Windows features on and outside."

    c. find the "Multimedia functions" menu and uncheck the 'Windows Media Center' tab click on 'OK' to complete the process.

    Activate:

    a. click the start menu and choose default programs

    b. click the item named Set Program Access and Computer Defaults

    c. choose the custom configuration

    d. in virtue to choose a default media player option, make sure the box to the right of the element of Windows Media Center that is labeled enable access to this program is checked

    It will be useful.

  • Promo for the Media Center Windows 8 code

    I have not had ANY knowledge or information about the Windows 8 Media Center free Promo code that expired January 31, 2013.  Is it too late for me to get a free promo code for this?  I bought my new laptop in December 2012.  Answer please!

    Yes, unfortunately, it's too late to get the promo code to use. He had to be asked and activated by January 31, 2013.

  • Accessibility for the control center features

    On iPad Pro with my view, the title of the song is invisible. Is there really no way to increase the font size or change color? Otherwise, the function is useless for me.

    No, there is no way to change anything in the control center. Time to get out the reading glasses.

  • Satellite P500-153 - need remote control for Windows Media Center

    I have a satellite P500-153, but without a remote mainenance (for housing expresscard).
    The suplier said I can buy it at the internetstore of toshiba, but I can't find a few anywhere!

    Maybe someone knows where I can get it or can give me the produktkey / the name of the remote maintenance.

    Hello

    As much as I know a few P500D Satellite P500 and X 500 series have been equipped with a remote control of size or a size slim (for express card slot) remote
    But as I said that some and not all units contains this remote.

    I think you should get in touch with a local ASP in your country.
    The authorized service provider could provide a compatible remote control.
    If this part is not in stock then the guys could order directly from Toshiba.

    Welcome them

  • Where do you buy the media center remote control?

    Where do you buy the media center remote control?

    Hi John,.

    What operating system is installed on your computer?

    You can buy the remote control for Windows Media Center of Windows Store:

    http://www.microsoftstore.com/store/msstore/en_US/list/CategoryID.50726100

    Reference: use a remote control with Windows Media Center

    Hope the helps of information.

  • What do you do when everty time you access something need you for windows media center

    It started with microsoft. Whenever I tried to access my Microsoft pages it took me to windows media center. Now, everything is in the Center. The only way I can get online is through a back door. I tried to change the default values for the Center, but the only default parameters listed are the original ones.
    Windows Media Center has taken control of my computer. Help!

    From what you have stated above, I think that the file association for LNK files has been given misdirection to the Media Center. I've seen this happen when opening a program via a shortcut (for example. LNK file), you are asked what type of program to open it with. After selecting the Windows Media Center (or another program) via the Select a program from a list of programs installedand check always use the selected program to open this type of file (circled in red below), the document or program referenced by the shortcut of origin opens in Windows Media Center as it should.

    The problem is that now all shortcuts (for example. LNK files) on the desktop or in the browser will want to be opened by Windows Media Center and Windows Media Center icon to view the shortcut no matter what shortcut was originally intentioned to open. This is known as a file association and the default icon. The same condition can occur if you have performed these actions 'Open with' on one. JPG or even a. EXE, but the. LNK explanation is much more likely for the items on the desktop.

    The good news is that a small free utility was written to cancel the. LNK file association was created. There is also a registry hack to achieve, but I recommend the utility unAssoc for its ease of use. I used to send people on another site to download this utility, but this site has become confused with all the ads and fake download links. I put a copy on by SkyDrive own here.

    Just download, then use the utility to unassociate the. LNK files for the user or globally delete the file type and let windows rebuild a new default.

  • How to disable the media center remote sensor?

    I'm unable to access the cheat console into oblivion and I googled the question, many people have the same problem, and common answer seems to be to disable the remote sensor in Windows Media Center.  I've been all over my pc, trying to figure out how do it, can anyone help?

    Hello

    Here's another user who had a similar problem associated with the link.

    http://social.answers.Microsoft.com/forums/en-us/vistagaming/thread/db087553-B14C-4691-9ea8-e0fa1f5e9d62

    Please let us know status.

    Concerning
    Anthony

  • Manual or how to use the ExpressCard Remote control Mobile HP Media Center

    My HP Pavilion dv7-1448dx-product # NV213UA #ABA.
    I'm running Win 7 Ultimate x 64 OEM.

    I searched HP and found 1 photo of my card ExpressCard Mobile HP Media Center remote control, I found all the descriptions of component and everything BUT how to use it?

    Where can I get information on how to use the "card ExpressCard Remote control Mobile HP Media Center"?

    Deborah M souls.

    Deborah M souls

    Hello

    Are you talking about the next device? How to install and how to use information is here:

    Express Card Media Center

    Kind regards.

  • Where can I find the Roll Up 2 update for Windows Media Center Edition 2005?

    I'm trying to download Media Player Version 11 and it says that I need to first install the Roll Up 2 update for Windows Media Center Edition 2005.

    Hello

    Before installing Windows Media Player 11 on Windows XP-based computer, you must download and install the Update Rollup 2 for Windows XP Media Center Edition 2005 on your computer.
     
    Initially, download cumulative update 2 for Windows XP Media Center Edition 2005 from this link.

    Update Rollup 2 for the Windows XP Edition Media Center 2005 (KB900325)
    http://www.Microsoft.com/en-US/Download/details.aspx?ID=12939
     
    Check out the link below to install Windows Media Player 11 on Windows XP.
    Windows Media Player 11 for Windows XP
    http://www.Microsoft.com/en-US/Download/details.aspx?ID=8163
     
    For more information, see Help links.
     
    Update Rollup 2 for Windows XP Media Center Edition 2005
    http://support.Microsoft.com/kb/900325
     
    It will be useful.

  • How to watch Internet TV for Windows Media Center to the Japan?

    Hello

    Is it possible to watch Internet TV for Windows Media Center to the Japan or watch television show or movies without TV tuner and cable?

    I live in the Japan and use PCs running Windows 7 Enterprise 64-bit.

    My Windows Media Center does not show TV on the internet, so I goggled for this solution, but I have some information and tried the procedures which have set similar problems, but still do not work.

    I still believe that Internet TV is supported in the Japan.

    You have an idea for this troubleshooting?

    Please help me.

    Thank you

    Monday, December 29, 2014 08:36 + 0000, avocado0227 wrote:
     
    > Can we watch Internet TV for Windows Media Center to the Japan or watching television or movies without TV tuner and cable show?
    >>
    >>
    >>
    > I live in the Japan and use PCs running Windows 7 Enterprise 64-bit.
    >>
    >>
    >>
    > My Windows Media Center does not show TV on the internet, so I goggled for this solution, but I have some information and tried the procedures which have set similar problems, but still do not work.
    >>
    >>
    >>
    > I still think that Internet TV is supported in the Japan.
     
     
    Microsoft has removed completely support Internet TV in September 2012.
     
     
     
    __________________________________________________________________________________________________
    Barb
    MVP Windows Entertainment and connected home
     
    Please mark as answer if that answers your question
     
     
     

  • What is TV tuner/Radio (FM) for Windows Media Center tuner? How to install on the computer?

    Hello

    What is the TV tuner and FM Radio tuner? Is it a software or a difficult, how to install them on the computer? I can buy from a retailer. How will I know which is for my pc.

    Please help me to answer the question.

    Respectfully,.

    Solvemachine

    Hello

    Thanks for posting the question in the Microsoft Community forums.

    According to the description, you need to know more about the Tv tuner and tuner Radio (FM) for Windows Media Center.

    To listen to the FM radio in Media Center, you will need a tuner FM connected to or installed on your computer and an antenna connected to the tuner to receive a signal. FM tuners are very similar to TV tuners in fact, many TV tuner cards have a built in FM tuner.

    Reference:

    Listen to radio in Windows Media Center

    http://Windows.Microsoft.com/en-in/Windows7/listen-to-radio-in-Windows-Media-Center

    See also for more information about the options of TV in Windows Media Center.

     
     
    Hope this information helps. Please reply with the status so that we can help you.

  • How to select the output device HDMI as audio playback for Windows Media Center device

    Output audio media center units

    Hello

    I'm trying to set up my media center from windows to windows media center of output through a separate audio device audio device by default.

    In this case, I have hdmi output that I want to be the output for windows media center and my realtek analog to be the default for all the rest.

    So my overall question is how I make windows media center requires is not the default audio device.

    Thank you

    Andrew

    Method 1 is useless. Does that change the audio device by default in the system, what the user seeks specifically not to do.

    Method 2 has no effect at all on Media Center.
    The answer seems to be no, Media Center only works with the audio output device by default.

Maybe you are looking for