Gettinng less updates to Windows Update after formatting Windows

Similar Questions

• Unable to get Windows Update after formatting

  Hi, my computer was not working and decided to format. When I formatted, he reversed himself to XP/SP2. Now I can't get Windows Update to work. I can't update Windows Update, install Microsoft Updates or get updates, not even when I tried to do it from the website. The website shows a couple of updates, but when I try to download/install, it fails.

  It seems I need to update to SP3 to get updates, but when I try this, told me to go to the updates of Windows. And once again. I can't do this, because it does not work. Is there anything I can do to update to SP3 and get my updates?  Thank you

  My computer has been pretty well updated, but now it's back to its native form:

  Windows XP/SP2

  IE6

  Have not reinstalled AV, because the computer is not letting me do

  I have a Super Antisuperware installed at the moment.

  Thank you

  Rosey

  Through these two articles:

  • Steps to take before you install Windows XP Service Pack 3

  • Windows XP SP3 - read all the prerequisites for a successful installation

  What offers Shenan Stanley is...

  1. Go to this web page: How to reset the Windows Update components? and use the Fix It utility in aggressive mode.

  2. Reset.

  3. Download here all the SP3 Setup file: Windows XP Service Pack 3 Package of Network Installation for developers and information technology professionals and save it to the Office of the administrator of the user account on the computer in question.

  4. Reset.

  5. Double-click the installation file downloaded in step 3 and follow the instructions.

  UTC/GMT is 02:03 on Thursday, October 27, 2011

• Re-insalling updates after formatting

  What happens if I have to format my hard drive and reinstall vista? I'll have to redownload all updates, or can the previous updates be saved announcement re-installed in offline mode?

  When you format the disk hard everything is wiped away.

  You should back up your data, make sure you have copies of your drivers needed for re - install, make sure you have copies of your programs as well as key codes.

  Yes, you will need to download all the updates again. Before reinstalling your software, you must install all the updates and Service Packs.

  If you have an installation disc Vista SP1 already on it, so make sure you have the stand-alone copy SP2 engraved on disk or Flash DRIVE before formatting. Install SP2 before you run Windows updates. http://TechNet.Microsoft.com/en-us/Windows/dd262148.aspx

  If your Vista disc doesn't have SP1 on it, install SP2 right after SP1 installs.

  This will save you a lot of downlaods between SP1 and SP2.

  Microsoft partner - "gentlemen, you can't fight in here! This is the war room. »

• Try to run the update to Windows XP. Had a complete crash of the PC and XP complete recharge after format. Could not downlaod updates XP then reloaded without format. Still can not download updates.

  Sorry about the title full, never used this site before

  Complete computer "meltdown" MB had failed. put spare MB in and loaded win XP - PRO after format. Could not downlad win updates.  Depc 0x8024400A error.

  Reload XP - Pro without format hoping to fix the problem.  No luck.

  Need help badly.

  I use AVG2012 for safety

  I am able to download the programs from other sources.

  I can't download the "Fixit" program as it equires SP3 and I'm to SP2.

  I tried the manual method and Thatcher did not.  I'll try the "aggressive" mode tomorrow (7/5) and if that doesn't work I'll

  seriously considered returning on Win2K.

  and then again loaded WinXP SP2 and I can not even do Windows updates.

  First, install the drivers necessary for the computer after reinstalling XP SP2. Then install the SP3 package after you a stand-alone download of SP3 Installer from this link:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

  Once SP3 is installed, try Windows Update. If it still does not work, or if the SP3 installation fails, you should get some messages or error codes. Post back with the error code.

• Cannot use windows update after the new installation of xp sp2

  Cannot use windows update after the new installation of xp sp2

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• I have the same problem. whenever I start windows it tells me it is install and configure updates, after 20 minutes he finally - but next time I start exactly the same thing happens - that is every day and im tired of it.

  I have the same problem. whenever I boot windows vista it tells me it is install and configure updates, after 20 minutes he finally - but next time I start exactly the same thing happens - that is every day and im tired of it.

  Hi MartinWithWindowsIssues,

  Welcome to the Microsoft Vista answers Forum!

  I have some steps that may help you.

  Step 1

  Try resetting the component of windows update.

  To do this, click resolve this present in the link below. Click run in the file download dialog box and follow the steps described in the fix it Wizard.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Step 2

  Perform a scan of the file system [SFC] checker on the computer that will replace missing or corrupt files.

  To do this, follow the steps below:

  1. click on the Start button

  2. on the Start Menu, click all programs followed by accessories

  3. in the menu accessories, right-click on command line option

  4. in the drop-down menu that appears, click the "Run as Administrator" option

  5. If you have the User Account Control (UAC) enabled, you will be asked permission before the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.

  6. in the command prompt window, type: sfc/scannow then press enter

  7. a message is displayed to indicate that "the analysis of the system will start.

  8. be patient because the analysis may take some time

  9. If all the files need replace SFC will replace them. You may be asked to insert your Vista DVD for this process to continue

  10. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.

  11. once the scan is finished, close the command prompt window, restart the computer and check.

  For more information, see the link below:

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

  http://support.Microsoft.com/kb/936212

  Hope the helps of information. Please post back and we do know.

  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How can I do I check Windows Update after installing Windows 7 if my internet interface does not work?

  My only internet connection is done by an AT & T USB Connect 881U (mfg Serra wireless). Windows 7 update Advisor indicates that

  I need to check Windows Update after installing Windows 7 to make sure that I have the latest driver for this device, otherwise it can not work.
  If this does not work I have no way of checking Windows Update. Any suggestions of how I could get out of this situation if it happens.

  When all else fails RTFM:

  Install the Windows updates:
  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  Update your computer:
  http://Windows.Microsoft.com/en-us/Windows7/updating-your-computer

  Understand the Windows automatic update:
  http://Windows.Microsoft.com/en-us/Windows7/Understanding-Windows-automatic-updating

  Updates: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/updates-frequently-asked-questions

  Change how Windows installs or notifies you of updates:
  http://Windows.Microsoft.com/en-us/Windows7/change-how-Windows-installs-or-notifies-you-about-updates

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• C 200 1 GB Sansa no storage, even after format; Unable to update software

  Hello

  before all sorry for my bad English.

  I have some problems with my sansa c 200 1 GB. Lately, the player had no storage, even if there is no songs on this subject. This problem persisted even after format. I went on the forum and that you try to upgrade the drive with new software (because I think it's a software problem). They wrote, there

  "Hold the record button until the"new hardware is ready to use"rises, and then press the record button."

  It does not, the player is connected to the computer (and does not display 'new hardware is ready for use'). I tried several times but it does not help (a few years ago, I needed a software update and it worked well (so I'm not stupid to push the right buttons); o)

  Thank you for your help,

  kulturkugel

  Since it is a C200 try to format using the MP3 itself. Go to settings and under settings, choose the format and we'll see what happens.

  Hope this helps.

• Problem with Windows Update after the removal of Virus

  My operating system is Win Vista 32 bit, had some virus closed my windows updates, have a view of the white page. Checked that my services and win update is in automatic mode has started, so I don't know why my updater gives me a red x saying windows updater is turned off.  Any suggestions?

  [Original title: Windows Update]

  https://answers.Microsoft.com/en-us/protect/Forum/protect_other-protect_scanning/problem-with-Windows-Update-after-removing-virus/3a8dd279-2732-4693-88bf-f5cea4afca96>

  It makes more sense. How to reset the Windows Update components?

  Yet, as indicated in The ball , the search results links do not work. I also used several browsers and DuckDuckGo. Maybe it's because the Windows Update Agent was changed some time ago and the article is no longer valid.

  EDIT: If the OP is also struggling to access the link I suggest using repair Windows updates available from tweaking.com. I suggest also using the Registry backup of the same author before hand.

  Repair the Windows updates

  http://www.tweaking.com/content/page/repair_windows_updates.html

  Registry backup
  http://www.tweaking.com/content/page/registry_backup.html

  I hope this helps.

• Error 8024402f Windows update after installing service pack 2.

  I received the error: 8024402f for windows update after installing service pack 2. I tried to fix it and manual fixation on this website http://support.microsoft.com/kb/836941, but I still receive same error code what do I do? I checked the history update, but it is not a failure to update.

  Original title: 8024402f error Code

  Hello

  Often we see weird behavior as the result of a program of loading during the startup process.

  To solve these, we use the clean boot troubleshooting.

  The following article describes this process:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Please note that after refine us the cause, it is important that we return to a normal startup and manually delete the startup program.

  We'll do this before uninstalling Service Pack 2.

  If the behavior persists, then we can clean boot, uninstall and reinstall Service Pack 2.

  Best regards

  Matthew_Ha

• Why windows update keep saying I need to update after I already do?

  I have my computer windows vista automatic update.  Automatic Update keeps popping up and telling me I have new updates.  I checked the update log and the same update has already been installed. Why the automatic update continues to inform me about these updates after that that they have been installed successfully?

  What updates you trying to install? (Number of KB)

  How to ask a question
  http://support.Microsoft.com/kb/555375 >

  It helps those answering questions if you provide:

  What is your full version of windows (32-bit or 64-bit) and service pack level. (Right-click on my computer and select properties: Windows version which is displayed on the general tab that results (for example, Windows XP Professional Service Pack 1;)) Windows Vista Edition SP2 family)?

  you use what browser (exact version).

  what application anti-virus or security suite is installed and your current subscription?

  What third-party firewall

  What other software products anti-malware are installed and running?

  Please do it in your next reply.

  Information you provide will help someone to provide you with a relevant solution.

  See the article following some possible troubleshooting:

  http://support.Microsoft.com/kb/910339/en-us >

  Please let us know if it did or did not help to solve your problem.

  08/23 / 1108:28: 22 pm UTC

• How do I copy the files to update Photoshop CS6 in an external Hardesk so I can install after formatting?

  How can I copy the Photoshop and Illustrator CS6 update files in an external Hardesk so I can install it after formatting my PC or re-install?

  Help > update should do it for you after the fresh install CS6.

  If you mean that the installation programs, you can download these applications download Creative Suite 6 and copy to an external drive.

  If you want to do the same thing for updates, go here: updates to manually download all updates cs6.

• I'm unable to install Acrobat 5.0 and 7.0 updated after you have reinstalled Windows 7 64 bit.

  I'm unable to install Acrobat 5.0 (full) and 7.0 update after having reinstalled Windows 7 64 bit. I should look forward to suggestions.

  I propose a compatible version - Acrobat DC.

• Windows 10 won't install after formatting in the installer from the disc

  Hello

  I tried to install 10 Windows on my MacBook pro 13 ' 2012 with SSD and HDD 10.11.5 running. I followed the procedure step by step with the Bootcamp Assistant for two hard drive. I have my USB Windows 10 install prepared, latest updates of Bootcamp and puppy 35 GB disk. I did this several times and can not get pass the Bootcamp with Windows partition install formatting. Whenever I click Next after format, he says "we couldn't create a new partition or locate an existing one. For more information see the installation log files".

  it say something about MBR and Windows needs EFI.

  I had the same problem, you click on the partition where windows should be installed? Seemed that Windows did not know where to put them.

• need to reinstall updates after reformat

  I have to go to the cumbersome process of reinstall all updates when I reformat the hard drive of my laptop?

  Lenovo has created three partitions on the hard drive installed. The smallest drive C contains Windows and software pre-installed. And I was told that the C drive should NOT be resized if not the OneKey recovery no longer work. But we are given the D drive which is MUCH bigger to contain all my personal data.

  updates take up a lot of my disk drive of the insignificant C, 19 GB space, which, in the end, let me about 700 MB to work with installing progs more. with do I find n reinstall every single update after reformatting the hard drive or do a system restore point? in this way he doesn't eat any more space in my C drive good?

  If not, grateful if you can advice me how to handle this accordingly.

  Hello Vanity.sha,

  Thanks for your reply.  A new installation of any operating system takes about 2-4 GB of space in the partition & after OneKey recovery on system should have been about 75% of free space available. I think there could be some unwanted files & folders on your system, so try to free the C: drive & then try to deploy the update for Vista.

  In addition, Microsoft & 3rd-party application has the ability to store the program files on all available disks, you can install these applications depending on the free space.

  I hope this helps.

  [If this post can help solve your problem, click on the button 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

  --