Ghostery causes Soundcloud down

Similar Questions

• DaqMX wait the next sample causing slow down Clock.vi

  Hello

  I have a question about the proper use of DaqMX wait for next sample clock.

  I read channels analog voltage on a map or pcie-6259.

  I would like to read as soon as possible make your comments between each of these points of single data points.

  I wish I had an error generated if I miss a data point.

  From reading the forums, I've gathered that the best way to do it is using the Timed Single Point material.

  A simplified program that I use to test this is attached.

  If I remove the DaqMX wait for next sample Clock.vi, my program seems to work.

  I added a counter to check the total time is as expected.

  For example, the program seems to work at the speed appropriate for 120.

  However, without that vi, it seems that the program does not generate a warning if I missed a sample.

  So I thought that the next sample clock waiting vi could be used to determine if a single data point has been missed using the output "is late."

  However, when I add inside as shown in the joint, the program seems to slow down considerably.

  At high rates as 120000, I get the error:-209802

  14kHz is the approximate maximum rate before you start to make mistakes.

  My question is: is this the right way to check a missed sample? I don't understand why the wait next sample Clock.vi is originally a slow down. Without this vi, the program does just what I want except that I do not have strict error control.

  My confusion may be based on a lack of understanding of real-time systems. I don't think I do 'real time' as I run on an ordinary pc, so maybe I use some features that I wouldn't.

  Thank you

  Mike

  Mike,

  You should be able to read to return delays errors and warnings by setting the DAQmx real-time-> ReportMissedSamp property.  I think that if you enable this, you will see errors or warnings (according to the DAQmx real-time-> ConvertLateErrorsToWarnings) in the case where you use read-only.  I'm a little surprised that you have measured your application works at 120 kHz without waiting for next sample clock (WFNSC), although I'm not surprised that it would be significantly faster.  I think if you call read-only, you'll read the last sample available regardless of whether you would of missed samples or not.  When you call WFNSC, DAQmx will always wait for the next, if you are late or not sample clock.  In this case, you will wait an additional sample clock that is not the case in read-only.  Once again, I expect that, in both cases, your loop would not go to 120 kHz.

  Features real-time DAQmx (hardware Timed Single Point - HWTSP) are a set of features that are optimized for a one-time operation, but also a mechanism to provide feedback as to if a request is following the acquisition.  There is nothing inherently wrong with using this feature on a non real-time OS.  However, planner of a non real-time OS is not going to be deterministic.  This means that your app 'real time' may be interrupted for a period not confined while the BONE died in the service of other applications or everything he needs to do.  DAQmx will always tell you if your application is to follow, but can do nothing to guarantee that this will happen.  Thus, your request * must * tolerant bet of this type of interruption.

  There are a few things to consider.  If it is important that you perform the action at a given rate, then you should consider using a real-time operating system, or even with an FPGA based approach.  If it is not essential to your system, you might consider using is HWTSP, where you do not declare lack samples (DAQmx simply give you the most recent example), or you could avoid HW timing all together and just use HAVE request to acquire a sample at a time.  What is appropriate depends on the requirements of your application.

  Hope that helps,

  Dan

• an error causes shut down firefox not being able to open the last session

  Firefox will restore not off any reason last session. The opportunity in Firefox/Google host malfunctions for any reason not giving the option to restart the last session.

  Hello, is firefox put to keep track of the websites visited & not the value delete historical when it closes in options > privacy?

• Insert Record Server causing DWCC2015 down behaviors?

  Since the upgrade to DWCC2015 I have real problems with the server behaviors panel in that whenever I try to create a behavior to insert a record, it blocks DW.

  I had to install the Panel "Disapproved the server behaviors" to get my database, links and server panels behaviors back, but I assumed that the feature in their midst would continue to operate.

  Would be recognizing all of the advice offered because it is totally flat all my websites database!

  Thank you.

  NJ

  Obsolete means ' is no longer supported. You use them at your own risk.

  If you really need to use server behaviors, you must install Dreamweaver CS6, which is included in your subscription to creative cloud. CS6 can coexist with the latest version of the CC on the same computer. However, you cannot run both programs at the same time (at least on Windows).

• Defective disk sector causes Illustrator down

  Recently, I had a bad sector on my hard drive. I am running Illustrator CS on a XP. After running disk check everything seemed to be back to normal, until I ran Illustrator. Initially failed to load on the same policy, but now it seems to be random. I tried to unload it, but Illustrator does not appear in the Uninstall list.

  As a last resort, I tried to recharge on the current copy, but when I got on the screen of both the accept/decline buttons sat on the text and do not work.

  Yes, this version of Illustartor is a moldy oldie, but that's all I can afford right now. The work that is delayed because of this problem is supposed to help me buy the upgrade (and perhaps a new computer).

  I sent a note to support at the beginning of this past week, but I have not heard back. I need this to be solved so I can finish this work.

  J

  Recently, I had a bad sector on my hard drive. I am running Illustrator CS on a XP. After Check Disk running everything seems to be back to normal

  Having a bad sector on your hard disk, and then to have these bad sectors 'repaired' (which means either mapped exclusion or fragments of files "reconecting") does not mean that data from corrupted in these areas are more corrupt. In other words, a disk utility may not fix the code of a program that is damaged due to a disk failure. Of the disk failure can be corrected (or effectively hidden), but disk utility can't re - install Illustrator for you. If the utility can tell you that 'all is well' but it just means that all the sectors currently used are good, and the fragments of files they contain are mapped to each other in the correct order. This does not mean that data that is located on these sectors does not appear.

  Looks like you need to reinstall Illustrator, but now keeps the previous installation. A complete reformat of the drive may be in order. I don't know of anyway to correct with reliability the confusion resulting in the Windows registry becomes blurred.

  JET

• Upgrade Xp to Win7HomePrem pc. After installing Windows updates, stop. When back on immediately, shuts down immediately

  1 Compaq Presario R4000
  2. origin o/s - XP home
  3 custom upgrade to Windows 7
  4 Update 1.4 RAM / ram addl pending install (under keyboard)
  5A had several attempts to install, after doing the migration tool - finally Rep dupgrade
  6 IE 8 installed - could it be causing stop down? vs updates of victory?

  Had to restore point x 2 so far, can be 3 from a few minutes ago.
  As soon as it restarts, updates, it stops.  Must then sit for a while until I can turn back on continue.

  Hi FraninLV,

  Thanks for posting on Microsoft Answers!

  1. we will first turn off automatic reboot if this computer does not start all the time.
  1. disable automatic reboot
  1. when your computer starts its next reboot (black screen), keep press F8 on your keyboard until you get the Advanced Boot Options screen.
  2. now, with your arrow keys, select Disable automatic restart in the event of system failure and press ENTER.

  Once you cancel this, provide us with the error log to fix this far.

  2. follow the steps below to provide the error log:
  1 type eventvwr.msc/s in the address bar.
  2. list all the events that are listed as 'Error' in the main window when you go to 'Newspapers Windows' and 'Application '.
  3. There is often a large number of them. Send us any ones you see listed for the last few days. (Please also do it for the log files in 'System').
  4. When you do so, provide us the name of the 'Source' and all that is listed in the description below the list of newspapers box when you click on one.

  Future prospects for the newspaper of the errors on your part.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forumand let us know what you think.

• Exrteme AC WAN slow airport

  Hello

  I encountered the following problem:

  If I test my internet connection directly with PPOE connection since my MacbookPro get 900MB or more download speed.

  If I'm testing with the router (with the same cable) I get only 250 MB speed.

  Any ideas what might be the problem? As far as I know this model has 1gbit WAN port.

  Thank you very much

  Zoltan

  Any ideas what might be the problem? As far as I know this model has 1gbit WAN port.

  Yes, it is... but NAT in router is not powerful enough to manage gigabit connections...

  I'd say you're still shy of the number... I expect about 400-450Mbps as the best, that the processor can handle without hardware NAT.

  The problem is firmware Apple removes material NAT... and without it the speed decreases considerably... but you probably other things running that is causing slow downs.

  For very fast router flow watch list in the table Smallnetbuilder.

  http://www.SmallNetBuilder.com/tools/charts/router/view

  Apple Airport extreme is in the list... a long long way down. Place about 80... with prices upwards... the design is now 4 years old and simple fact is that they have been exceeded on all fronts.

• Pwdbank crashes if I use Microsoft OneNote

  Whenever I use OneNote, it causes Pwdbank down. Even if it is open for a few moments, I get several error messages for the next five - ten minutes. I receive several messages "External Exception C000001D." as well as "access to 00000001 address violation. Reading address 00000001.

  Could not find a patch or update for pwdbank.

  Does anyone have any suggestions or a solution?

  James

  Hello!

  The pwdbank.exe belongs to the real Site Access Manager.

  So in your case, I would try to update. Search on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Moreover, what laptop and operating system do you have?

  Good bye

• Skype crashing whenever it starts on the last version

  I had issues like this before and always cause boils down to a poorly programmed update of Skype.

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: Skype.exe
  Application version: 7.5.0.101
  Application timestamp: 555498c 4
  Fault Module name: Skype.exe
  Fault Module Version: 7.5.0.101
  Fault Module Timestamp: 555498c 4
  Exception code: c0000005
  Exception offset: 0022b3ac
  OS version: 6.1.7601.2.1.0.256.1
  Locale ID: 1033
  Additional information 1: 0a9e
  More information 2: 0a9e372d3b4ad19135b953a78882e789
  Additional information 3: 0a9e
  Additional information 4: 0a9e372d3b4ad19135b953a78882e789

  Read our privacy statement online:
  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\system32\en-US\erofflps.txt

  This is not a 'hack', there piss bad coding on the side of development teams to not add a check for that... idiots...

  How hard is it to validate a string.split of ffs, Regex, string, even a simple URI check its 101 similar coding of the dam... once again idiots... Please delete my Skype account at all, I've lost faith in your abilities...

• a6317c HP with windows 7 is installed

  installed a second hard drive, it shows on the System Device Manager, but not on my computer

  Hello

  You create a partition and format the hard drive?

  Click the Windows Orb and type in disk management in the search programs and files box type in disk management. Click on the hard-create and format disk partitions.

  

  Find your new drive, click it to select it and then right click on it to optional operations. You can see which drive is activated by the presence of diagonal lines.  If it doesn't have a drive letter, contains no partitions and is not formatted, then that's why he can't see in Windows Explorer. You may also need to select Create a simple volume. Do not create a dynamic volume you could cause problems down the road.

  

  If you have any question over all what you need to do is post them here.

  Best regards

  ERICO

• The mouse graphic error, impossible to get rid of him, until I restart. Loading screen error, video included.

  OK, so here is the thing. I'm a gamer, I play Everquest right now and Im having problems with my computer 'new '. It was bought used, but when we test tried at home to the owner initial, everything worked perfectly. Since then, my husband has reformatted and put on Windows Vista Buisness on it. After a post on the game forums, Kevin helped me to get the PC to stop locking up. Yet, I still have the other problem with the mouse pointer.

  First thing first: computer information!
  Edition of Windows: Windows Vista Business Service Pack 2
  System:
  -Processor: AMD Athlon (TM) 64 X 2 Dual Core Processor 5000 + 2.61 GHz
  -RAM memory (RAM) 3.00 GB
  -System type: 32-bit operating system
  Graphics card: Radeon HD 4850
  Motherboard: nForce 590 SLI

  Next: I am 100% positive that there is no update pending for the operating system. There are things in option that I can install it, but they are not relevant to the problem that I currently have.

  So here's the question:

  (1) for the loading of Windows Vista Business. I see the text channel 0 Slave and in the lower right of my two monitors, both monitors so it is important, there is a rectangle that is 1/2 at the bottom of the screen.
  I included a video of him: [URL = http://tinypic.com/r/jhae14/5] View My video [url]
  (2) sometimes when the games, I see a square box that resembles film developed that appears randomly on the screen.
  Note: I only see the error all in game, because when the PC is on that's what I do. Here is the screenshot [IMG] [line] http://i44.tinypic.com/2evqekg.jpg
  (3) I have experience this behavior in and out of the game, but the screenshots in EQ are easier and faster to make and Vista does not see the problematic mouse pointer when you take a screenshot of it. Sometimes I will be able to tab in and out of what I do and it will go away, othertimes it requires a complete closed system and then it will go away. Here is the screenshot: [IMG] [line] http://i43.tinypic.com/qqswtx.jpg With the image that I just linked, there are three examples of the problem. The upper left corner has the double serrated edge, the other two posted on a character's head to make it easier to see. (Not sure if the 2nd link works or not. List of URL to Tinypic to show errors: http://tinypic.com/r/qqswtx/5)

  These problems don't always cause me down, but there are moments where I feel this graphic glitch, so the computer has locked up. It's incredibly less frequent that another EQ crashing the computer problem, I had. He posted the question here, happens once or twice every two days, when it isn't something I can deal. In the 2nd picture the edge serrated turning into that, you can always click in the right place. One would think that you would use just the tip to click on something, but sometimes this does not work and must continue to go upward or downward a bit to get to what you were tryin to close / open / whatever.

  Thank you for your time!

  Hello Dewifey,

  Thank you for posting.  I checked the other thread just so that I would have a complete understanding of the problem.  I studied him this strongly and I came up with some possible solutions for you.  As seems to be more than a gliche graph, I will propose common fixes first.  The first is to check the site ati.amd.com for updated for your video card drivers.  The second is to check for updates or patches for the game Everquest game.  Now we can get right to my search results.

  The only problem with EQ is really changes to security of XP to Vista.  EQ always assumes that users will run as administrator with full access to all under the directory %ProgramFiles%.  In Vista, even if logged in as an administrator, you don't actually run as administrator.  You must explicitly elevate your rights before becoming administrator (such as right click, run as administrator, or configure the program to run as administrator).  Just put the game to run in compatibility mode for Windows XP Service Pack 2 and run in administrator mode.
  If you forget to do this, the patch cannot connect records and will be silently _ it's short films before leaving.

  This step applies only if you run the game in windowed mode.

  One way to expedite EQ in Vista is to click right on eqgame.exe and on one of the tabs that you can disable "desktop composition" that disables the interface Aero and stop the GUI running on your video card.

  Please let me know if this helps you.

  Zack
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• I want reliable simple tips to decrease the turn of my computer out of time?

  Recently, my computer began to take a lot of time to turn off. I use Windows XP Home Edition, including at - it advice to reduce this time?

  Make sure you have all the unnecessary programs from when the computer starts, some of these unnecessary programs running in the background can cause slow downs.  Slow stops are often encountered when the system is struggling to unload the user profile, install the Microsoft User Profile Hive Cleanup Service .

  John

• rocket + stuck on "loading".

  Hello

  I just got a 8 GB fuze +, an updated firmware to date with the latest, loads of 6 GB of mp3, vbr between 256 and 312 KB and the thing is stuck on "loading".

  I tried to put it on, but it does the same thing, sticks on 'loading '.

  I thought to reformat, or reset the firmware on it, but when I connect it to my computer, it is not detected (probably because he is stuck on "loading")

  Ideas?

  Wow! It is too long; something not right here.

  You can perform a reset by pressing and hold the power button for 20-30 seconds. I would like to and then format the player to start over. I also recommend to check your inflated files as tags ID3 tags or a wrong format can cause slow downs or gels of the updating of the database.

  With 6 GB of files, this can seem like a daunting task, but MP3Tag (freeware) can make quick work of it. Set the default write format ID3v2.3 ISO-8859 - 1 in the Tools menu. Also erase anything in the comments field of the tags.

  Then when reloading, consider using a few folders at a time. If it starts to do it again after a particular addition, this will help you narrow down which files may be causing the problem.

• HP laptop (Vista Home Premium) won't wake up mode 'sleep'

  My HP Pavilion dv6910us laptop will follow the recommended power options and enter "sleep mode", as you want it or made-to-order... among the STARTUP options or by closing the lid.  However, once he is in "sleep" mode it won't wake up.  The LED on the power button flashes and the indicator on the chassis... but by pressing, open the lid or by touching the keys is useless... he wakes.

  To restart the laptop, I have to disconnect power, remove the battery and then connect the power/insert battery.  Needless to say, it causes Windows down and declare an unexpected shutdown during the power upward.  I did the research many resolutions... currently, my best solution is to change the power options so that when plugged the laptop doesn't go to sleep and then if I disconnect I have to shut it down... Rather, I don't have to go through this hassle all the time.

  I've followed many troubleshooting procedures... Updated BIOS update... Updated graphics driver... I even tried a "clean boot"... no additional services except for Windows services and has always had the same problem.

  Please... Help!

  This link solved my problem

  http://www.vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html?filter [11]

• Code 19 cd dvd not working not not with Windows Vista Business-failure to load the software driver for ATAPI DVD A DH16A6S ATA Device...

  Barely noticed as useless before using the dvd on this machine cd - error code indicates... .Configuration (in the registry) is incomplete or damaged. (Code 19)

  Having read the other answers and the last similar validation seems to be dated to April 2010 of anything else because it please?

  I tried Driver Update and reinstall... .rebooting and then on the line ' difficulty his "all so far nothing works.  What is the latest information about this problem - can any that provide extra help or guide me for more relevant prior display and the best way to proceed. Failed to load software driver for ATAPI DVD A DH16A6S ATA Device...

  Mr. Fix it's obviously gone vacationing insofar as this problem is concerned... Cheers for any help.

  Hello

  Norton is known to cause slow downs and other issues. Uninstall and then running
  the Norton Removal Tool to stop the remains (even those will interrupt the strange) to load.
  Use the recommendations below when testing, even better would be permanently.

  Norton Removal Tool
  http://www.Symantec.com/Norton/support/kb/web_view.jsp?wv_type=public_web&docURL=20080710133834EN&LN=en_US

  List of tools to clean/uninstall anti-malware programs
  http://social.answers.Microsoft.com/forums/en-us/msestart/thread/407bf6da-C05D-4546-8788-0aa4c25a1f91/

  =================================

  Here's what I use and recommend: (these are all free and very effective versions.)

  Avast and Prevx proved extremely reliable and compatible with all I have
  launched on them. Microsoft Security Essentials and Prevx have also proven to be very
  reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.

  Avast Home free - stop any shields is not necessary except leaving Standard, Web, and
  Operation of the network.

  Prevx - Home - free

  Windows Firewall

  Windows Defender (is not necessary if you use MSE)

  Protected IE - mode

  IE 8 - SmartScreen filter WE (IE 7 phishing filter)

  I also IE always start with asset if filter InPrivate IE 8.
  (It may temporarily turn off with the little icon to the left of the + bottom
  right of IE)

  Two versions of Avast are available 5.x and 4.8 x

  Avast - home - free - 5.x stop shields you do not use (except files, Web, network, &)
  Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
  Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
  Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
  disabled - click OK
  http://www.avast.com/free-antivirus-download

  Avast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
  and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
  Finish those you don't use).
  http://www.avast.com/free-antivirus-download#TAB4

  Or use Microsoft Security Essentials - free
  http://www.Microsoft.com/Security_Essentials/

  Prevx works well alongside MSE or Avast

  Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
  or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  PCmag - Prevx - Editor's choice
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Also get Malwarebytes - free - use as scanner only. If you ever think malware and that
  would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
  (not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
  never find anything of note that I started to use this configuration.

  http://www.Malwarebytes.org/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.