GIMP works do not correctly under Windows 7 (GUI problem)

Similar Questions

• DVD players dual layer works do not correctly under Windows 7 64-bit

  I am running Windows 7 Ultimate 64-bit. I have a LIte on double layer DVD writer which has the latest firmware. Unfortunately, while all software can see it's a double layer capable drive, time that I try to use it, it fails. The drive itself is good because if I put in a system using Windows 7 32-bit, it burns discs double layer perfectly. I've been all over the internet for the last 2 days looking for solutions, and I have tried everything that I've heard of. Uninstalling drivers, ensuring that there is no upper or lower filters showing, uninstall and then reinstall the drive, edit the registry. Again, the drive WILL burn discs double layer in 32-bit Windows 7, but it burns ONLY of single layer DVD in Windows 7 64 bit.

  I hope that someone here has found a solution to this. Especially since I'm wanting to upgrade to a Blu - Ray dual layer burner so that I can use fewer disks to make backups of the system. I know Bu-Ray discs are more expensive, but I prefer to use 2 or 3 Blu ray discs to backup my system than 10 or 15 DVD. However, if discs double layer Blu Ray do not work under 64-bit Windows 7, then there is no need to upgrade.

  OK, 1. The drive works PERFECTLY under Windows 7 32 bit, which has all the same drivers / software that is running the 64-bit system.

  2 features of fine player like a DVD of SINGLE LAYER burner (it burns fine of the simple DVD layer), but not as a burner double layer (doesn't even recognize a DVD double layer is still in the drive, he MADE on the 32-bit system and burn them without any problem.)

  I have contacted LITE-ON and am running the latest firmware. Similarly all other drivers on the system (a new system just built 2 weeks ago). Basically, all the material on the 32 bit WINDOWS 7 are cloned on the 64 bit system. Everything is the same. Only change is the operating system.

  I've seen other forums that have been linked and tried everything suggested... which most have not even apply it. Still refuses to acknowledge that a DL disk is in the drive.

  So at this point, I'm simply not worry more. Going to buy the Blu - Ray burner and only single layer Blu - ray discs.

  Thank you all for trying to help. I guess the answer to this is that no one really knows what that really is the issue, and even less how to fix.

• ALPS Touchpad doesn't work does not correctly under Windows 7

  I have a Dell laptop with a touchpad Alps. I recently installed windows 7 and now the touch pad scroll feature does not work. I tried to re install the drivers, but windows gives me an error message indicating that there is a conflict. How can I get the touchpad to scroll again using Windows 7?

  Hello

  Is this by chance a Vostro laptop?

  If so, there's already a long thread about this in another forum: http://social.technet.microsoft.com/Forums/en-US/w7itprohardware/thread/cf9bc301-e3c2-4c5b-b9cd-9eab8582f45f.

  Currently, there is no work around.  When I put in information about this problem, I'll post in the thread above.

  Thank you
  Mark you want to know if your hardware current & software will work with Windows 7? Click on these links: *Windows 7 Upgrade Advisor * *Windows 7 Compatibility Center*.

• Firefox doesn't work does not correctly on Windows 10

  Well, I've upgraded to Windows 10 and since then, Firefox is not working properly (not not display graphics, google sites won't load do not, etc.), I tried uninstalling and reinstalling several times, I even waited for the new update... None of them worked. I read something about security certificates, saying I had to import them to Firefox, but the certificate that he mentioned did not exist in my computer. I have also disabled hardware acceleration, cleared my cache, even deleted my profile from my computer, all to nothing does not. It is sad to see the attached screen. (A text-only screen saying: "Firefox + Windows 10.) Perfect set")

  I hope you guys can resolve this problem as soon as possible. If this is happening to me, it happens to a lot of people.

  Did you secure yourself certificate errors? If Yes, do you use Avast, BitDefender, ESET or Kaspersky?

  If you do, we can give specific suggestions.*

  If this is not the case, a further 10 Windows users questions are report is that they were added to a family and their Firefox has been the subject of parental controls that causes seemingly random crashes. Try to turn off the parental control of Microsoft (or are not part of a family): http://windows.microsoft.com/en-us/windows-10/turn-off-microsoft-family-settings

  * For Avast, you can disable the part numerical analysis of Web Shield. I saw these steps in another post:

  1. Open the Avast dashboard on an affected system.
  2. Select settings in the left side menu.
  3. Adopt a Protection Active.
  4. Click on customize next to the Web Shield.
  5. Uncheck the option "Enable HTTPS analysis", and then click ok.

• Microsoft mobile mouse 3000 works do not correctly under Vista

  I have a mouse Microsoft 3000, which is less than 3 months old. I replaced the battery. I used the reset button. However, the mouse will not turn on gree. indicating that the mouse works. I saw this question already on the Microsoft answers site. ILO is unable to find the solution. Can you help me?

  Hi Instructor4216,

  I recommend you to try the steps in the articles below. You can exclude what you have already tried.

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  http://support.Microsoft.com/kb/838398

  Troubleshoot a wireless mouse that does not correctly
  http://support.Microsoft.com/kb/321122

  If the problem persists, you get your mouse replaced.

  http://support.Microsoft.com/kb/326246/

  I hope this helps.

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• D - Link USB Hub DUB - H7 works do not correctly with Windows 8

  I am also having the same problems.

  Very recently, I went from 7 to 8.1 and with the operation of the steam, the sound of connect/disconnect repeats about every 10 seconds. If I disconnect the D - Link DUB - H7 sound no longer appears.

  I could live with it for the time being cut just sounds system, but unfortunately the problems don't stop there.

  If I have my USB DAC (sound card) connected via the hub, pilots always crashes in a few minutes in Spotify or any multimedia player. It means that I actually listen to music at all.

  Hardware troubleshooting does not detect any problems at all. For now I'll connect my USB DAC separately and cut system sounds, but it is not a solution. Never had any problems with this hub in Windows 7 and I don't really feel like buying another usb hub since it fits my needs perfectly.

  Separated from -.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/d-link-USB-hub-dub-H7-not-working-properly-with/1158a3bc-487d-40C1-b3d0-2419ace3ef2e?page=2

  Hello

  Answer the next question to learn more on the subject, that you are facing.

  What is the brand and model of the computer?

  Install the chipset drivers by downloading from the website of the manufacturer of the computer and check the status of the issue.

  I also suggest you run the Fixit from the link next and if it helps fix the problem.

  Hardware devices do not work or are not detected in Windows,.

  http://support.Microsoft.com/mats/hardware_device_problems/

  Please let us know if you need assistance.

• Speakers not working do not correctly under Vista

  Description
  Windows has detected a new device attached to your computer, but did not find the driver software, to make the device usable. Each device manufacturer typically includes the driver from a CD that comes with the device, or for download on its Web site. Your device hardware ID is USB\VID_069B & PID_0705 & REV_0101.

  Signature of the problem
  Problem event name: PnPDriverNotFound
  Architecture: x 86
  Hardware ID: USB\VID_069B & PID_0705 & REV_0101
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1033

  Additional information about the problem
  Bucket ID: 7122630

  * original title - 2 different sets of speakers connected to the computer, worked last week, but not now! UGH! Thank you for your times

  Try a system restore to a Date before the problem began:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• User account control does not not correctly under WIndows 7.

  I'm having a problem with the user account control.  It appears each time I run a program, even if my settings are different.  How can I fix?

  Hi Clukin,

  Thanks for choosing Microsoft Community Forums.

  According to the description, I understand that you have a problem with user account control in Windows 7.

  To help better please answer these questions:

  1. do you use the administrator account?

  2. the problem occurs with specific program or the whole?

  3. what anti-virus program do you use?

  4 did you do changes on the computer before the show?

  I suggest you follow the method provided to fix the problem:

  Method 1: You can not change the settings on Windows 7 (UAC) user account control

  http://support.Microsoft.com/kb/978591

  Method 2: Turn off the antivirus software

  http://Windows.Microsoft.com/en-GB/Windows7/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Links:

  User account control

  http://Windows.Microsoft.com/en-GB/Windows7/products/features/user-account-control

  Guided Help: adjust the settings of user account control in Windows 7

  http://support.Microsoft.com/kb/975787

  Note: User Account Control (UAC) can help you to prevent your computer from unauthorized changes. It works by asking permission when a task requires administrative rights, such as installing software or changing settings affecting other users. We do not recommend disable user account control. If you turn it off, you must reactivate as soon as possible.

  For the related issue of Windows or anything related to the Windows operating system, do not hesitate to contact us and we will be happy to help you.

• PS6 works do not correctly with windows 10

  Is anyone else having problems with PS6 after switching to Windows 10?  Every bit of controls results in my image go black or the area outside the image to transform "into white" (checkerboard showing empty rather than dark grey which is usually the backdrop for the image I work with).  At first I thought that I could live with it, but now it's extremely annoying.

  Try this link.  I suggest downloading & running the pilot first utility to search for the missing/outdated drivers.

  MSI FX720/FX720DX drivers download 10, 8.1, 7, Vista, XP

  It does not resemble the divers Intel graphics have been updated in a long time.  You may go directly to Intel.

  Nancy O.

• ALPS touchpad works do not correctly with Windows 8 dm4-2070us

  I upgraded to Windows 7 to Windows 8 on my laptop dm4-2070us, and now I have more use of gestures or scrolling on the Alps touchpad. The left and right buttons work and I can move the cursor anywhere on the screen, but that's all. Everything else seems to work fine. I can't find drivers anywhere for the Alps touchpad for Windows 8. All the world has noticed what is happening? I hope that a new driver will soon be developed but not optimistic. Any suggestions out there?

  Hello

  The ALPS Win8 dm4-2xxx pilot will be SP58700 and should appear on the ftp site, when it is released.  I have no ETA, but it should be soon.

  FTP://FTP.HP.com/pub/SoftPaq/sp58501-59000/

  Wes

• YouTube videos doesn't work does not correctly in Windows 8

  Hello - I bought my first computer windows 8 today.

  One of the first things I did was to install Mozilla Firefox and Adobe Flash.

  To my horror, when I tried to load a YouTube video, played a second of the video clip, then the standard error of YouTube message.

  I checked that I have properly installed flash player, that my firewall settings are correct, and I have the latest video drivers.

  Flash seems to work on everything else YouTube and Microsoft Help forum (the submit button would work...) it's the same in Firefox and regardless of the version of Internet Explorer, I installed here

  Any help is greatly received!

  Thank you

  Sam

  Have just to be sure, you been through EVERYTHING here? : http://helpx.adobe.com/flash-player/kb/flash-player-issues-windows-8.html

• K8600 work does not correctly on Windows 7

  My k8600 comes to print to scale right on word, autocad, adobe reader software and perhaps other software installed on windows 7. If I print a drawing or text on sheet A3 the result is that printing occupies only the upper left side of the sheet.

  A beta win7 driver or a replacement driver exists for k8600?

  I had problems with margins in Windows Vista too... but not this terrible way!

  Kind regards

  Matteo

  I deleted the printer, I removed completely the driver Windows 7 print management and reinstalled the default driver simply by searching for the printer on the network. Now the k8600 seems prin normally.

• DevCon does not not correctly under Windows 7

  * original title - the pop - ups with DevCon command prompt"

  Hello world

  My problem is:
  I use Devcon to manage my devices, it's a small .exe file.

  With the command: devcon /hwids, the program returns all devices connected to the PC.

  But when I do that, it opens a new window, print the list, and then close this window.

  But what should normally happened and what I want, is that the list print in the same window that I execute the command.

  In order, then, to write this list in a file txt, with the command: devcon /hwids * usb * > device.txt

  Thank you!

  Hi walibixo,

  Please see article with some useful information:

  http://www.Microsoft.com/whdc/devtools/WDK/relnotesw7.mspx

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Microsoft Money 97 will work correctly under Windows 7?

  Microsoft Money 97 will work correctly under Windows 7?

  Hi Jsmale,

  Microsoft Money 97 is not compatible with windows 7.

  You can also consult the following link:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?type=software&s=Microsoft%20money%2097

  Swati K - Microsoft support technician

  Visit our Microsoft answers feedback Forum and let us know what you think

• Speed dial does not work with Firefox 5 under Windows 7; How can I down Firefox 4.1?

  Speed dial Extension does not work for Firefox 5 under Windows 7.

  How can I downgrade to Firefox 4.1 so that I can use this indispensable Extension?

  This link will be fix Fast Dial for Firefox 8.0.1

  http://DL-Web.dropbox.com/u/12466346/speedfox.org/addons/fast_dial-3.5b1fixed2-FX.xpi