DevCon does not not correctly under Windows 7

Similar Questions

• ALPS Touchpad doesn't work does not correctly under Windows 7

  I have a Dell laptop with a touchpad Alps. I recently installed windows 7 and now the touch pad scroll feature does not work. I tried to re install the drivers, but windows gives me an error message indicating that there is a conflict. How can I get the touchpad to scroll again using Windows 7?

  Hello

  Is this by chance a Vostro laptop?

  If so, there's already a long thread about this in another forum: http://social.technet.microsoft.com/Forums/en-US/w7itprohardware/thread/cf9bc301-e3c2-4c5b-b9cd-9eab8582f45f.

  Currently, there is no work around.  When I put in information about this problem, I'll post in the thread above.

  Thank you
  Mark you want to know if your hardware current & software will work with Windows 7? Click on these links: *Windows 7 Upgrade Advisor * *Windows 7 Compatibility Center*.

• Reference software does not work under Windows 7

  Reference 9, a bibliographic database program, does not work under Windows 7.  It worked fine under XP.  Support of reference people were a great help and I'm stuck with the program so far.  The program opens and can be saved, but when you do a search, the first research work, but a second search will generate a message 'quote has stopped working.  A problem caused the program to sop work correctly.  Windows will close the program and notify you if a solution is available. "Then you must click on the" close program"button to close the program and then re - start.

  Are you sure that all the prerequisites for the program have been installed (like the .net Framework or VC ++ runtime libraries)?

  In addition, is the version of the reference program tested by the people of tech reference that same as you use?

  Please make sure the version of the program made for Windows 7 is available, and if yes, you can use this version of Windows 7.

  A work around:

  If the program fails to work, even if all prerequisites have been installed, you can try to install the software in Windows XP Mode (not recommended, but we can not miss this in the case of legacy programs). You can take a look at the following links:

  http://Windows.Microsoft.com/en-us/Windows7/install-and-use-Windows-XP-mode-in-Windows-7

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=8002

• application of foxpro for Dos does not work under Windows 7 Home Premium 64-bit

  Dear Expert help me!

  My foxpro for Dos application does not work under Windows 7 Home Premium 64-bit. Please advice me! How can I do for running under Windows 7 64-bit

  waiting for early response
  Thank you and regards

  SAIF Ali Sabri
  Faisalabad, Pakistan
  E-mail address is removed from the privacy *.
  + 923007960782

  16-bit applications are not taken charge/does not not on 64-bit Windows

• The ADF Mobile preview pane does not work under Windows 8.

  The ADF Mobile preview pane does not work under Windows 8 64-bit even I use Jdeveloper 11.1.2.4.0 version, but I use windows 7 64-bit or windows xp works fine.

  How to solve this problem, please.

  Thank you!
  

  Hello

  I installed JDeveloper 11.1.2.4 on my machine Windows 8 and the extension of the ADF Mobile. I can open the ADF Mobile Viewer. There is therefore no problem with this on Windows 8. I used the generic facility, which is that I have installed the JDK and then run the command for installing JDeveloper Java-jar.

  Frank

• 7.2 framework does not install under Windows 7 Ultimate

  HELP: FrameMake2 7.2 does not install under Windows 7. Near the end of the installation, it hangs with a blank dialog box and a warning. Nothing else.

  All view

  Keep smiling

  Thomas

  Hi Thomas,

  Long time no see...

  If FM7.2 is not officially supported, I think you must be in compatibility mode so that it can behave properly with Windows 7.

• Microphone does not work under Windows XP Home - P100

  Hi all

  I am a new user of French a P100-473 series and games. I have it downgrade to Windows XP Home edition for the goal of the game.

  I use conexant high definition driver v 3.11 and its working fine but not the microphone plug on the front of the laptop. I tried all the driver conexant Web 3.12 3.14 and after and the problem is reversed, the microphone does not work very well "using the audio msn Configurator" but I have no sound.

  The driver is working properly, no error, but not sound under windows. Does anyone have a solution for me?
  I have worked on this for 1 week and I really want to resolve the thing, because the cell phone is a great product and on vista, it works like a 486.
  Thank you very much

  Fred

  Hello

  On the Toshiba download page there is unfortunately no driver audio Windows XP Home edition for this laptop preinstalled Vista. Read some other assignments that I found the same reports sound works but mic cannot be used.

  Sorry, but it is clear at the moment, there is no solution to this stupid attachment problem. :(

  Just one last thing: try to install your own Vista without Toshiba has designed tools and utilities and let me know how your P100. ;)

• AMD Radeon 7400 (switchable graphics) on dell vostro 3350 does not work under Windows 8 (error code 43)

  Hello

  I just installed Windows 8 and switchable graphics does not work on the system. The most annoying is that I can't use the radeon graphics card, because the stop system it works.

  I've attached a screenshot of what I see:

  

  What I have tried to solve the problem:

  • Install the latest drivers AMD radeon HD (http://support.amd.com/us/kbarticles/Pages/AMDCatalyst1211betadriver.aspx)
  • Reinstall the driver built-in Intel (HD Graphics 3000)
  • The latest version of the A09 bios for laptop
  Nothing has worked.
  Switchable graphics worked very well under Windows 7 64-bit.
  Help, please!

  and the version of the driver:

  

• A VB6 application does not work under Windows 7 (32 bit). Run-time error '339'.

  Hello. I have a problem you're trying to start my program I wrote long ago on VB6. When it is run, it displays an error message: "run-time error '339': component ' COMCTL32." "OCX' is not correctly registered: a file is missing or invalid. I searched "comctl32.ocx", but it doesn't seem to be anywhere in C:\Windows (including subfolders). Using this installation - first http://www.microsoft.com/en-us/download/details.aspx?id=10019 , then System File Checker do not solve the problem - the program still does not work and ' COMCTL32. OCX' is not found. What should I do?

  Start here: http://msdn.microsoft.com/en-us/vstudio/ms788708

  This link to the download for the execution time extended to http://support.microsoft.com/kb/957924

  and

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=7030

• Firefox doesn't work does not correctly on Windows 10

  Well, I've upgraded to Windows 10 and since then, Firefox is not working properly (not not display graphics, google sites won't load do not, etc.), I tried uninstalling and reinstalling several times, I even waited for the new update... None of them worked. I read something about security certificates, saying I had to import them to Firefox, but the certificate that he mentioned did not exist in my computer. I have also disabled hardware acceleration, cleared my cache, even deleted my profile from my computer, all to nothing does not. It is sad to see the attached screen. (A text-only screen saying: "Firefox + Windows 10.) Perfect set")

  I hope you guys can resolve this problem as soon as possible. If this is happening to me, it happens to a lot of people.

  Did you secure yourself certificate errors? If Yes, do you use Avast, BitDefender, ESET or Kaspersky?

  If you do, we can give specific suggestions.*

  If this is not the case, a further 10 Windows users questions are report is that they were added to a family and their Firefox has been the subject of parental controls that causes seemingly random crashes. Try to turn off the parental control of Microsoft (or are not part of a family): http://windows.microsoft.com/en-us/windows-10/turn-off-microsoft-family-settings

  * For Avast, you can disable the part numerical analysis of Web Shield. I saw these steps in another post:

  1. Open the Avast dashboard on an affected system.
  2. Select settings in the left side menu.
  3. Adopt a Protection Active.
  4. Click on customize next to the Web Shield.
  5. Uncheck the option "Enable HTTPS analysis", and then click ok.

• Solution Center does not work under Windows 7 with Officejet Pro L7780

  Downloaded the latest version of the software for Windows 7 and the first issue was when you try to do an installation complete you get a fatal error at the 96 percent mark when she did the configuration. I looked on the web and found a lot of posts on the same problem. Then, I just uninstalled and made a gradual installation.

  Main printer DRIVER installed first. Then did the functions of imaging followed by the solution Center device.

  Installed everything, but when you run the solution center it says it can't open because incomplete installation.

  The printer works from Windows 7.

  I have an XP machine and Solution Center working on it.

  Any suggestions anyone.

  This thread has resolved the problem installing the software that supports the HP Officejet Pro l7780 for use on Windows 7.

  The event viewer showed mistakes that network location for %APPDATA%\protector.exe is not found.

  Even if I couldn't run the original installation of solutioncenter.msi to work without errors in the log file, without making any changes, which has not completely solved the problem.

  Since solutioncenter, initially did not work, I decided to run solutioncenter.msi manually and look at the log file. See errors in the log file we made changes to the database with Orca solutioncenter.msi. It took us on a long road that does not initially sense that HP would put something out there that produced errors in the msi log file.

  I don't know how the setup.exe uses solutioncenter.msi?

  The changes that doesn't seem it to matter when you run the setup.exe file that is provided in the download.

  If I used the modified solutioncenter.msi or version orginal of it as downloaded from HP running setup.exe site had no importance regarding obtaining solutioncenter work in windows 7, canceled only changes in the solutioncenter log file errors.

  I had to make the following changes to the environment variables to get the full package to work, but what is strange is that I could replace the changeed solutioncenter.msi or the original solutioncenter.msi and run setup.exe, with the following environment changes didn't matter. The solution Center has worked in Windows 7 using one of the solutioncenter.exe and setup.exe.

  Apparently, setup.exe does not use the MSI directely. I think that HP responses suggested that in a previous thread.

  Add these entries (click new...) for the owner user variables and System variables:

  In the name box: APPDATA

  In the value box: %USERPROFILE%\AppData\Roaming

   

  Run setup.exe and event viewer does not display % APPDATA % Scriptures and all work.
  

   

  Thanks for all help on this.
  

• DVD players dual layer works do not correctly under Windows 7 64-bit

  I am running Windows 7 Ultimate 64-bit. I have a LIte on double layer DVD writer which has the latest firmware. Unfortunately, while all software can see it's a double layer capable drive, time that I try to use it, it fails. The drive itself is good because if I put in a system using Windows 7 32-bit, it burns discs double layer perfectly. I've been all over the internet for the last 2 days looking for solutions, and I have tried everything that I've heard of. Uninstalling drivers, ensuring that there is no upper or lower filters showing, uninstall and then reinstall the drive, edit the registry. Again, the drive WILL burn discs double layer in 32-bit Windows 7, but it burns ONLY of single layer DVD in Windows 7 64 bit.

  I hope that someone here has found a solution to this. Especially since I'm wanting to upgrade to a Blu - Ray dual layer burner so that I can use fewer disks to make backups of the system. I know Bu-Ray discs are more expensive, but I prefer to use 2 or 3 Blu ray discs to backup my system than 10 or 15 DVD. However, if discs double layer Blu Ray do not work under 64-bit Windows 7, then there is no need to upgrade.

  OK, 1. The drive works PERFECTLY under Windows 7 32 bit, which has all the same drivers / software that is running the 64-bit system.

  2 features of fine player like a DVD of SINGLE LAYER burner (it burns fine of the simple DVD layer), but not as a burner double layer (doesn't even recognize a DVD double layer is still in the drive, he MADE on the 32-bit system and burn them without any problem.)

  I have contacted LITE-ON and am running the latest firmware. Similarly all other drivers on the system (a new system just built 2 weeks ago). Basically, all the material on the 32 bit WINDOWS 7 are cloned on the 64 bit system. Everything is the same. Only change is the operating system.

  I've seen other forums that have been linked and tried everything suggested... which most have not even apply it. Still refuses to acknowledge that a DL disk is in the drive.

  So at this point, I'm simply not worry more. Going to buy the Blu - Ray burner and only single layer Blu - ray discs.

  Thank you all for trying to help. I guess the answer to this is that no one really knows what that really is the issue, and even less how to fix.

• Number lock does not work under windows 8.1

  I have an Acer laptop Aspire E1-522 using windows 8.1.  When that I start, the keypad works because I can log on the computer by using the keypad.  Once I am 'welcomed' trying to enter data on the Microsoft Office program (Word, Access, Excel, Notepad etc.) the keypad does not work.

  Every search I did leads me to some company trying to sell me programs to solve the problem.

  Word and Excel displays Num Lock indicators in the lower status bar?

  You must right click on the color bar to activate it (right click on where the red dot is, and then turn on Num Lock).

  

  After that, Excel will tell you if the NUMLOCK is considered by the program, with a power indicator near the left:

  

• Solution Center does not correctly install Windows 7 64 bit

  I've looked everywhere on the forum about this but still do not have a resolution.

  I have a HP Photosmart C7280, I've had two or three years.  When it is connected to an XP machine it worked fine.  I have since bought a new PC running Windows 7 Home Premium 64 Bit, and although I tried over and over, install, uninstall and reinstall the software from the HP Solution Center, I can't work.  I really need to have the feature analysis of the Cluster Solution that I need to scan documents up to 100 pages.

  Is it possible that this software is not compatible with Windows 7 64 bit?  I downloaded the software later on the site of HP and my PC works always the latest updates of Windows 7.

  If I can't get this resolved, I'll have to buy a new printer all-in-one and believe me it will not be a HP this time.  Help, please.

  Please see below for more details.

  Here is the log of the error:

  

  Here's a sceenshot of the error:

  

  I followed the steps listed below and have had no luck.

  Click the Start button and type %temp% term or search programs and files of field

  Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).

  Step 2 - download and extract to your system:

  1. Download latest features full software and drivers for your printer from the link below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-71555-3&cc=us&DLC=en&LC=en&...

  2. once the download is complete, double-click the file to extract the software.

  3. once the extraction is completed, and the installation window opens, press the Cancel button to stop the installation

  4. click on the Start button and type %temp% term or search programs and files of field

  5 find and open, starting with 7z folder (example: 7zS2356)

  6. right click on the folder and select copy

  7. close this window (all your open windows), then in the middle of the desktop right-click of your mouse and select Paste. This will move the 7z folder on your desktop.

  8 open the 7z, that you just copied on your desktop

  9 open the Util folder

  10 open the CCC folder

  11 start the uninstall_L4

  12. once the uninstall is complete, restart the computer

  13. run disk cleanup from the tools Accessories\ system under all programs folder

  14. download and install the latest version of Adobe flash player

  http://get.Adobe.com/flashplayer/?promoid=JZEFT

  15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

  Well I'm done chasing my tail.  It is clear that this is never going to work.  I tried to do the installation on another machine in 64-bit Windows 7 (gateway GT5228) which was a clean install and never had a HP product installed on it before and she's not exactly the same way.  I also tried a XP operating system installation and it works beautifully.  So my conclusion is that developers at HP simply no interest to this provision on Windows 7 64 bit, or they are simply too incompetent to make it work properly.  I am a software consultant in real life, and I do installations on servers is not as if I'm inexperienced.  I decided to buy another printer, but after this experience, it will not be a HP.  It is not just that a printer that works very well mechanically must be thrown on the junk-pile because the software cannot be upgraded successfully.  HP is not very favourable to the environment, creation of garbage where it could be avoided.  Sad and disappointed.

• User account control does not not correctly under WIndows 7.

  I'm having a problem with the user account control.  It appears each time I run a program, even if my settings are different.  How can I fix?

  Hi Clukin,

  Thanks for choosing Microsoft Community Forums.

  According to the description, I understand that you have a problem with user account control in Windows 7.

  To help better please answer these questions:

  1. do you use the administrator account?

  2. the problem occurs with specific program or the whole?

  3. what anti-virus program do you use?

  4 did you do changes on the computer before the show?

  I suggest you follow the method provided to fix the problem:

  Method 1: You can not change the settings on Windows 7 (UAC) user account control

  http://support.Microsoft.com/kb/978591

  Method 2: Turn off the antivirus software

  http://Windows.Microsoft.com/en-GB/Windows7/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Links:

  User account control

  http://Windows.Microsoft.com/en-GB/Windows7/products/features/user-account-control

  Guided Help: adjust the settings of user account control in Windows 7

  http://support.Microsoft.com/kb/975787

  Note: User Account Control (UAC) can help you to prevent your computer from unauthorized changes. It works by asking permission when a task requires administrative rights, such as installing software or changing settings affecting other users. We do not recommend disable user account control. If you turn it off, you must reactivate as soon as possible.

  For the related issue of Windows or anything related to the Windows operating system, do not hesitate to contact us and we will be happy to help you.