Speakers not working do not correctly under Vista

Similar Questions

• Microsoft mobile mouse 3000 works do not correctly under Vista

  I have a mouse Microsoft 3000, which is less than 3 months old. I replaced the battery. I used the reset button. However, the mouse will not turn on gree. indicating that the mouse works. I saw this question already on the Microsoft answers site. ILO is unable to find the solution. Can you help me?

  Hi Instructor4216,

  I recommend you to try the steps in the articles below. You can exclude what you have already tried.

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  http://support.Microsoft.com/kb/838398

  Troubleshoot a wireless mouse that does not correctly
  http://support.Microsoft.com/kb/321122

  If the problem persists, you get your mouse replaced.

  http://support.Microsoft.com/kb/326246/

  I hope this helps.

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Have not corrected to Vista by chance Free Upgrade Windows 7, Windows 7 disc.

  have not had a single problem for a set of 4 years on Windows 7.

  Already in 2010, upgrading to Windows 7 from Vista because my Asus G51vx qualified for the free upgrade.

  I don't remember how the upgrade process was done 4 years it's long.

  Last night I decided to reformat and give my phone to my mother, (everything was going slowly and was cluttered with the data that I had already saved)

  I moved Windows 7 Ultimate on my PC that I built.

  I used Magical Jelly Bean to save my product key and information, but could not find the Vista Windows Asus recovery DVD, since I couldn't find an edition of Windows 7, I guess that's how you have to reformat; Back to Vista and then upgrade to Windows 7.

  Now I'm stuck in Vista x 64

  How can I get back Windows 7?

  You are lucky, you still had the vista Asus recovery disc reinstall Vista, who operates a Vista.

  It was the way to reinstall Vista as the COA sticker is worn

  There is no more we can tell you.

  The key that you say is for Windows 7 works, or it doesn't.

  If that does not work, contact Asus.

• DVD players dual layer works do not correctly under Windows 7 64-bit

  I am running Windows 7 Ultimate 64-bit. I have a LIte on double layer DVD writer which has the latest firmware. Unfortunately, while all software can see it's a double layer capable drive, time that I try to use it, it fails. The drive itself is good because if I put in a system using Windows 7 32-bit, it burns discs double layer perfectly. I've been all over the internet for the last 2 days looking for solutions, and I have tried everything that I've heard of. Uninstalling drivers, ensuring that there is no upper or lower filters showing, uninstall and then reinstall the drive, edit the registry. Again, the drive WILL burn discs double layer in 32-bit Windows 7, but it burns ONLY of single layer DVD in Windows 7 64 bit.

  I hope that someone here has found a solution to this. Especially since I'm wanting to upgrade to a Blu - Ray dual layer burner so that I can use fewer disks to make backups of the system. I know Bu-Ray discs are more expensive, but I prefer to use 2 or 3 Blu ray discs to backup my system than 10 or 15 DVD. However, if discs double layer Blu Ray do not work under 64-bit Windows 7, then there is no need to upgrade.

  OK, 1. The drive works PERFECTLY under Windows 7 32 bit, which has all the same drivers / software that is running the 64-bit system.

  2 features of fine player like a DVD of SINGLE LAYER burner (it burns fine of the simple DVD layer), but not as a burner double layer (doesn't even recognize a DVD double layer is still in the drive, he MADE on the 32-bit system and burn them without any problem.)

  I have contacted LITE-ON and am running the latest firmware. Similarly all other drivers on the system (a new system just built 2 weeks ago). Basically, all the material on the 32 bit WINDOWS 7 are cloned on the 64 bit system. Everything is the same. Only change is the operating system.

  I've seen other forums that have been linked and tried everything suggested... which most have not even apply it. Still refuses to acknowledge that a DL disk is in the drive.

  So at this point, I'm simply not worry more. Going to buy the Blu - Ray burner and only single layer Blu - ray discs.

  Thank you all for trying to help. I guess the answer to this is that no one really knows what that really is the issue, and even less how to fix.

• ALPS Touchpad doesn't work does not correctly under Windows 7

  I have a Dell laptop with a touchpad Alps. I recently installed windows 7 and now the touch pad scroll feature does not work. I tried to re install the drivers, but windows gives me an error message indicating that there is a conflict. How can I get the touchpad to scroll again using Windows 7?

  Hello

  Is this by chance a Vostro laptop?

  If so, there's already a long thread about this in another forum: http://social.technet.microsoft.com/Forums/en-US/w7itprohardware/thread/cf9bc301-e3c2-4c5b-b9cd-9eab8582f45f.

  Currently, there is no work around.  When I put in information about this problem, I'll post in the thread above.

  Thank you
  Mark you want to know if your hardware current & software will work with Windows 7? Click on these links: *Windows 7 Upgrade Advisor * *Windows 7 Compatibility Center*.

• GIMP works do not correctly under Windows 7 (GUI problem)

  I think it could be a problem in GTK +. I have problems selecting an item with the click of the mouse. I can go over it with the pointer, it became blue, but I can't click on it, i like is stuck. He accepted instead of the 'Space' key as a confirmation of order. The problem is spreading in all parts of the GUI.

  Maybe in the past, I installed another program with GTK +, but I already uninstalled it and uninstalled and reinstalled the latest version of Gimp, but the problem persists. What can I do? Thank you.

  

  2 weeks late, but the dating of the issue helped me to find a version that works.

  Uninstall the version 2.8 and download 2.6 here:

  http://GIMP-win.sourceforge.NET/old.html

  The old version works for me.

• Satellite A100-998: mono/stereo mix not available under Vista

  Windows Vista and the Microsoft default value "High definition Audio Device" driver (automatically selected and installed by Setup of Vista), no recording device is listed with the exception of the Microphone, Line In, CD Audio, as in this screenshot of the A100-998 in question:
  http://img230.imageshack.us/img230/1981/a100998jp6.PNG

  No new Mix or record Waveout options of the device, which means that you can not, for example, doesn't record audio stream on the Internet. I tried the latest drivers from Realtek HD Audio for Vista (30/11/2006 R1.52). No change. Is there a way/driver to enable this as in other Windows Vista machines.

  Is also the audio material in the A100-998 "Vista Premium Ready" with the specifications set out in the http://www.optimalsound.net/?

  It's the third disappointment. The first two were that he has not delivered with the announced NVIDIA GF7400 (came to the square with 7300) and the second is that the hard drive is 4200 RPM (instead of the advertised 5400).
  The third issue is the audio issue detailed above.

  Here is a solution I found, but it is not free (costs $US28.20) and requires users to manually switch the "playback devices" each time that they execute it:
  http://www.NCH.com.au/SoundTap/index.html
  Unlike other programs like Audacity which are based on the Waveout/Mono/Stereo Mix as their sound source (and so do not work in this case), NCH SoundTap installs its own virtual driver and is therefore able to record everything you hear through your speakers in Windows Vista without the need for Waveout/Mono/Stereo Mix. "All the sound elements are"typed"by a pilot virtual directly in the kernel, so the process is perfect digital quality."

  However, it would be better that Vista Realtek/Toshiba/Microsoft "High definition Audio Device" driver is updated to include the Waveout/Mono/Stereo Mix (under "recording devices"), so that programs that rely on it are broken. SoundTap can do on Vista means that it is not a hardware limitation.

  PS new Vista sound effects as Loudness equalization, Room Correction, Bass Management and Virtual Surround are already supported in the current drivers Vista (the driver from Realtek v1.52 and that by default by Microsoft) in Satellite A100-998.

  Post edited by: [email protected]_UK

• Duplex not recognized under Vista 64-bit printing accessory

  I recently had to replace my old computer with an HP Pavilion a6700f running Windows Vista Home Premium 64 - bit SP1.

  I got my 7410 HP all-in-One printer connected and operating, the latest software HP installed and checked for updated drivers, firmware or Windows updates to date. Everything is up-to-date.

  However, my two-sided printing accessory is not recognized. I tried to do an update of the parameters, but the accessory does not appear in the drop-down menus.

  I learned by HP Technical Support that it is a Windows problem, but I can't quite believe that even Microsoft would come out an operating system does not recognize the material of the major manufacturer.

  Is that what everyone knows about this problem? Is this really a Windows glitch?  If so, is there a workaround solution that will allow me to do automatic duplex printing?

  pdef1949 wrote:

  Bob sent me an email with the patch, but I'm not sure I'm reading it correctly because the patch does not work. I got an error message that the printer driver has not been installed and he gave me a window to select options. I think it installs just the drivers of Bob wants to replace.

  In the e-mail to Bob, he said save the attachment as % temp%\hpo7x00t.gpd.  I don't know where to put this, and this is perhaps why the patch has not yet worked.

  Can someone tell me with certainty where to save the file?

  You just need to save the DPG file to a temporary location.  Folder is the location for temporary files of the system, it refers to a directory.  If for some reason it doesn't, you can do the following to the administrative command prompt:

  mkdir c:\temp

  [save the gpd c:\temp\hpo7x00t.gpd]

  then in the copy command:

  copy c:\temp\hpo7x00t.gpd c:

  Kind regards
  Bob Headrick, Microsoft MVP printing and imaging

• HP OfficeJet J5780 all-in-One not Scan under Vista 64-bit

  I have brand new HP Pavillion Dual Core processor and 6 concerts computer memory, so I know that my computer is OK.

  I have a computer set up to Dual Boot Windows Vista Home Premium 64 Bit & Ubuntu Linux.

  Under Linux, the printer will print & scan (both)

  In Vista, it prints only

  My wife has Windows XP on his computer & it prints & Scans

  We come to the rear USB cable & before printing on computers.

  I have downloaded the latest drivers & critical updates & installed Vista without result.

  It will not even scan directly from the printer.

  On the printer, it says:

  No scan option, don't refer to the device Documentation. ???

   

  I know the printer is about 2 to 3 years, but it still works except scan!

   

  Please help, thanks in advance

  It is fixed after reading the HP Help Pages

  To scan in Vista... You MUST do it in paint or Windows Photo Gallery.

  Hope this helps someone

• Impossible to install any program because not supported under Vista, but my PC is Windows 7 Pro 64-bit

  I try to install Rockwell Automation Studio 5000, but I get an error message saying "Studio 5000 is not supported on Windows Visa without Service Pack 1 or higher". However my PC is under Windows 7 Pro (64 bit) and Vista that is covered by the requirements of this program.

  Any ideas?

  What is the version number of Studio 5000 you have?

  You can try to install using the "compatibility mode".

  What is program compatibility?
  Program compatibility is a mode in Windows that allows you to run programs written
  for earlier versions of Windows. Most programs written for Windows Vista are also running Windows 7,
  but some older programs might run poorly or not at all.
  http://Windows.Microsoft.com/en-us/Windows7/what-is-program-compatibility

  Compatibility mode - make sure to run older programs in this version of Windows:

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

  Windows 7 Compatibility Center
  See if your software or hardware is listed and what options you have

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Learn how to use the Mode of Windows 7 compatibility with legacy applications

  http://Lifehacker.com/5466628/learn-to-use-Windows-7s-compatibility-mode-with-older-apps

  Using Windows 7 or Vista Compatibility Mode

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  Also: http://www.sevenforums.com/tutorials/1196-internet-explorer-compatibility-view-turn-off.html

  J W Stuart: http://www.pagestart.com

• Hard drive is full, but should not be under Vista

  I have a HDD 288 GB and for the last 2 weeks, he tells me it's full and I have no idea why.  I deleted the files and folders and free space, I took custody of fill right back up again!  I also searched through files and folders and I have about 200 GB reported missing.  I also ran an anti-virus software, anti-spyware and firewall is running.  But my hard drive keeps filling.  I have already downloaded and run WinDirStat, and it found nothing.  I have a 288 GB HDD and only 3,94 GB free.  It shows that Go 79.5 is on 'My Computer', 73.5 GB C drive and 6.0 GB on my D/recovery disk.  What takes my space drive hard and how find and get rid of it? Thanks, Mayet

  * original title - my hard drive is full and I do not know why.*

  "Well how DO I SHOW them where they are when they are HIDDEN and ENCRYPTED?

  ' 4.3 GB has been filled MORE hidden and encrypted copes of my own files with mozy!

  "Dell told me that because they are hidden and encrypted want it only I can delete them is to do a clean reinstall of Windows.

  I'm sorry, but it's the process of Mozy which is causing problems.

  We can not help you with that.

  Here is the Dell Recovery Options to reinstall vista:

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  Above is Dell to reinstall Vista from the DVD on your computer.

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

  And that way if you have a recovery partition on your hard drive.

  See you soon

  Mick Murphy - Microsoft partner

• CD/DVD drive suddenly not recognized - under Vista Ultimate.

  I have a HP Pavilion running Vista Ultimate.  Recently it stopped recognizing my cd/dvd drive.  The regedit procedure does not help, because I have no UpperFilter registry entry.  Where should I go next?  Is there a link that will take me to more useful information?  I don't know how to get instructions for regedit go to "next steps". Thank you!

  What is the link you are looking for?

  http://support.Microsoft.com/mats/cd_dvd_drive_problems

• User account control does not not correctly under WIndows 7.

  I'm having a problem with the user account control.  It appears each time I run a program, even if my settings are different.  How can I fix?

  Hi Clukin,

  Thanks for choosing Microsoft Community Forums.

  According to the description, I understand that you have a problem with user account control in Windows 7.

  To help better please answer these questions:

  1. do you use the administrator account?

  2. the problem occurs with specific program or the whole?

  3. what anti-virus program do you use?

  4 did you do changes on the computer before the show?

  I suggest you follow the method provided to fix the problem:

  Method 1: You can not change the settings on Windows 7 (UAC) user account control

  http://support.Microsoft.com/kb/978591

  Method 2: Turn off the antivirus software

  http://Windows.Microsoft.com/en-GB/Windows7/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Links:

  User account control

  http://Windows.Microsoft.com/en-GB/Windows7/products/features/user-account-control

  Guided Help: adjust the settings of user account control in Windows 7

  http://support.Microsoft.com/kb/975787

  Note: User Account Control (UAC) can help you to prevent your computer from unauthorized changes. It works by asking permission when a task requires administrative rights, such as installing software or changing settings affecting other users. We do not recommend disable user account control. If you turn it off, you must reactivate as soon as possible.

  For the related issue of Windows or anything related to the Windows operating system, do not hesitate to contact us and we will be happy to help you.

• KB978886 could not update under Vista

  My window vista os 32 bit keep due to lack of updated security KB978886, any way to solve?

  Hello

  see if that helps to fix:

  How to reset the Windows Update components?

  There is also an automatic 'fix - it' here

  http://support.Microsoft.com/kb/971058

  Also, try to put the KB numbers in the search on the link below and then manually download the

  http://www.Microsoft.com/downloads/en/default.aspx

   

  or please repost your question in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• text have not correction under the table (IE6?)

  Here is a link to a page in safari that I work well, which seems to work in FF and Safari.

  http://myjobmarket.ca/joblistemp.php?emp_id=1

  In IE6 (haven't checked the newer versions yet) displays the meter to record under the table of results ('record 1 to 2 of 2") to the right of the table, wedged against the sidebar.  Everyone sees why? Is this a CSS problem?

  Thanks in advance,

  Greg

  Remove align = "left" of the nested table.