give me the solution...

Similar Questions

• Hello friends, I am not able to record the songs in music in ios 9.3, please give me the solution.

  Hello friend

  I'm not able to record the songs in music in IOS 9.3, please give me the solution.

  Click on album artwork, not the name of the song as you used to. the album art will fade to black revealing the old side thing.

• Whe trying to update ios to ios 9.3 9.2.1 come error 3194 give me the solution for all I phone and ipads

  Whe trying to update ios to ios 9.3 9.2.1 come error 3194 give me the solution for all I phone and ipads

  Try some suggestions here: If you see error 3194, error 17, or "this device is not eligible for the requested build" in iTunes - Apple Support

• When I turn on the system of its display in the moniter as NTLDR missing.please give me the solution for this problem.

  When I turn on the system of his displayiing on the moniter as NTLDR missing. Please give me the solution for this problem

  Hello

  NTLDR is not used for installation of Vista, it's a vestige of WinXP / 2K. If it is listed as "missing", then your boot sector is damaged and must be repaired. The steps are described here: http://support.microsoft.com/default.aspx/kb/927392?p=1

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• I get error 101, give me the solution.

  I get error 101 after almost completing the download, what is the solution?

  Error T.k.Koul 101 see solution 2 in Troubleshoot Adobe Download Assistant.

• install only a winxp.trying so that i receive bluescreen error.please give the solution

  I'm already installed win vista for my compaq cq60-104tu laptop.now I install only a winxp.trying so that i receive bluescreen error.please give the solution

  Hello

  It would be better if you provide the exact error message, but you can try the following procedure:

  http://h10025.www1.HP.com/ewfrf/wc/genericSoftwareDownloadIndex?softwareitem=ob-54270-1 & CC = US & LC = on & DLC = in & DLC = in & lang =

  Kind regards

  Mohammed Mukram

• When I try to start the computer in the morning, he goes off and after trying to restart the computer 2 times it becomes normal. Please give me any solution for this.

  When I try to start the computer in the morning, he goes off and after trying to restart the computer 2 times it becomes normal. Please give me any solution for this.

  Hey Abdul HamidNagoor,

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         What is the brand and model of the computer?

  Follow the steps in the article.

  Advanced Troubleshooting for General startup problems in Windows XP

  If the problem persists, follow the steps in the article.

  How do I recover from a corrupted registry that prevents Windows XP startup

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://support.Microsoft.com/kb/322756

• I have a 4TB vdisk and it occupies space is 2 TB and the remaining space is free but it is very slow, what could be the possible reasons and give the solution for this.

  I have a 4TB vdisk and it occupies space is 2 TB and the remaining space is free but it is very slow, what could be the possible reasons and give the solution for this

  Assuming that you are talking about disk space from in the guest OS. You are probably using an MBR partition table, which limits the maximum usable disk space to ~ 2 TB. In order to use the entire disk space, you need a GPT partition table.

  André

• After the upgrade to windows 10, my dreamweaver has stopped working. Could someone give me a solution for this? I really need DW!

  After the upgrade to windows 10, my dreamweaver has stopped working. It starst and lasts 30 seconds and never work again.

  Could someone give me a solution for this? I really need DW!

  Problems during the installation or opening Dreamweaver on Windows 10

• Netflix bought through iTunes does not give me the option 4K

  Netflix bought through iTunes does not give me the option 4K

  What, instead, have you done so far? Netflix Checked site help or a FAQ section? Contacted Netflix? If none of these give a solution contacted iTunes Support (http://reportaproblem.apple.com)?

• I FOUND THE SOLUTION FOR THE TX WIRELESS PROBLEM!

  Hi guys,.

  IM pretty happy problem because I found the solution for my tx 1219 us wireless!

  First of all, my laptop started with wifi problems. Then, when I tried to start, nothing has been posted.

  I read a lot of posts on forums that talking about changing the motherboard by HP.

  I sent my knees to HP in Argentina - where i live - and they had sent me a budget with a «renewed» system map

  I was paying, so I pretend a new.

  Tired and frustrated on the HP customer service: they dosen´t recognize their mistake. They dosen´t give me GUARANTEE AND they pretend a lot of money for something refurbished!

  I found a post where a guy - now away for me is 'God' - explains how to fix this problem yourself! AND a lot of positions where other guys did, and they confirm that it works!

  Here's the method. Feel happy!

  This post is for the repair of the range of following HP laptop: tx1000, dv2000, dv6000, dv9000, with AMD processors and graphic chips from nvidia (6150go).
  Symptoms are more, wireless wireless card are running out, are repeatedly, the laptop, it does not ignite until several attempts and finally the laptop turns on but he did not have no image in the monitor, in some models, you listen to some sounds.

  The cause is excessive overheating of the GPU from nvidia, which has powered up to 100 degrees or but tends to fail the welds that unite it to the mother of the card.
  HP already admitted the existence of the failure in the design of the card, and extended 2-year warranty, so that if even you can demand but the desirable thing is to do, the method I describe is simple and has worked in 100% of those laptop with this problem, prefer all must do it under your own risk.

  Step 1. -It is necessary to compile the necessary material: this is a 1-cent American copper currency or a currency that similar thickness now about a 1/16 of an inch, or a piece with these features, but the copper. also we will need a table lamp with a halogen centre, or the one with the normal centres but it is 150W or but case is that it heats up a lot. disipadora thermal paste of what they take microprocessors (sold at any electronics store).

  step 2. -Once gathered our components, it is necessary to remove the mother card and remove the radiator so that they are exposed to the microprocessor and the nvidia chip.

  Step 3. -Now, we are committed to the lamp, started to warm up a while, in my case I have tapeworm a gun to measure temperatures and saw that it was 134 degrees, once it is hot we close set, but the thing at latest, the graphics chip, but on the other hand, where all the solder points are seen We leave about 5 minutes, which were both that I gave him, no doubt, it can be less, depending on the source of heat, once that done this we have pressed with the fingers with force the graphics chip (care, it will be hot), which will be expanded by heat welding is to merge.

  Step 4. -Now, we put a little disipadora in the room by both parties and we placed on the graphics chip and put the radiator and arm!

  It is with the intention of wrong correct dissipation system design since the heat produced by the chip is transferred to the coin in copper.

  Copper is an excellent conductor of heat and thus provide the heatsink of makes, initially was clearly a very small between the radiator and the chip and when warm itself does not transfer not warmth to any party since not thanks to the air, it can, but the copper coins made this work

  Greetings

  Message edited by Wendy on 30/04/2009 21:02

  Please see the procedure on YouTube

  http://www.YouTube.com/watch?v=musu759LsT4

  Message edited by Wendy on 30/04/2009 21:02

• What window updated each time showing error code 00000646 nearly a month what is the solution

  What window updated each time showing error code 00000646 nearly a month what is the solution

  Thank you

  msiddique

  Gives it a try and see if it solves the problem.... http://support.Microsoft.com/kb/2258121

  Let us know if this helped

• Can someone give me the steps to disable the touch pad for Dell Inspiron 600 XP?

  I received instructions to set "crazy cursor" on my Dell Inspiron 6000 Windows XP.

  One of the application steps that I disable the touchpad, because I prefer an external mouse.

  Can someone give me the steps to disable the touchpad?

  Thank you!!!

  * original title - fixing "cursor crazy."

  Hello

  here a solution, how to disable the touchpad (Dell):

  http://www.notebookforums.com/forum/thread/105933/heres-how-u-turn-off-touchpad-its-about-time

  LC

• Photosmart C6180 all-in-one: cannot install the solution on 8.1 Center

  I received a message that there was a problem with the Solution Center. I uninstalled, but were not able to reinstall.  I thought that maybe the printer Installation Wizard might help, but that can not install no more. The printer is getting to be about 7 to 8 years, but still works fine. The 8.1 is an upgrade of Windows 8. When I choose the download, nothing happens.

  Hello layor.

  Welcome to the HP Forums.

  I see that you have a problem for the printer, re-installed on your computer.

  If you have the printer connected to the computer with a usb cable, please remove both ends and pass the cable on the side for now.

  Please start by clicking on the following link for uninstall the printer software.  We want to make sure that the old software has been completely removed until we are trying to re - install.

  Once the uninstall is complete, restart the computer so that the changes take effect.

  When the computer is back on, disable firewalls or anti-virus protection.  We don't want anything blocking the download depending on whether I'm going to give you.

  Here is the link for the drivers and software HP Photosmart full feature.  Save this file on the desktop of the computer so that it creates its own icon.  It will be easy to find when the download is complete.

  Double-click the new icon and follow the installation instructions.  You will receive connectivity options. If you choose to use a USB connection, do not connect it until you are prompted to do so.

  If you have any questions or concerns, feel free to write me again at any time.

  See you soon,.

• Cannot install the Solution Center in Windows 7 for HP7310

  I have a HP7310xi AIO that works very well until recently.  I've recently updated Win/XP to Win 7 32 bit and the printer software will not be installed correctly.  I downloaded and tried all the diagnostic tools that I can find on this site, nothing helps.  I can print but cannot scan due to lack of Solution Center software.  I want this to be a device connected to the network and part works very well with the printer, but I repeat, it will be no scanner - is network or USB accessory.

  I downloaded (several times) the file of the AIO_CDB_Net_Full_Win_WW_130_141 software, which is supposed to install the necessary software, but IS NOT INSTALL the Solution Center.  I tried HPPIW for installation and also HPHNDU and HPPDU for the diagnosis of the printer, and who work very well.  I also tried HPPSdr (who works for the printer, but not scan) and HPSDU, which does not at all.

  I still have my original installation CD and I tried, but of course it does not work with Win 7.  I also tried to uninstall the entire software package and then try to re - install, also without success.  It seems that the uninstall process is incomplete, or at least that's my guess.  I tried running also uninstall batch since the original installation CD files (the files to \util\CCC\Uninstall, Uninstall_L1, etc.) and they seem to work, but still the re - install subsequent does not install Solution Center.

  I recently ordered the customers a new installation CD, expecting a full installation CD for Windows 7 and receive.  The label of the CD says it's for "HP Officejet 6300, 7200, 7300 all-in-One-series", and also that it is "Version 13.1.0" and "Windows 7" and "Multiple languages"  It is the number of piece CB744-10003 and seems to be exactly what I need.  HOWEVER... This is ACTUALLY ON THE CD!

  Usefully, the label gives the following instructions:

  Insert the CD in your CDROM drive

  All Windows operating systems:

  (a) click on 'Start' in the task bar, then click on 'run '.

  b} type d:\Setup and click OK (where "d" is your CD drive letter"

  This is exactly what I expected to see on an installation CD; BUT there is NO "SETUP" FROM THE CD FILE!

  The content of the CD is exactly TWO FILES:

  AIO_CDB_Net_Full_Win_WW_130_141.exe, and

  AIO_CDB_Net_Full_Win_WW_130_141.MD5

  The first file is the same as I've downloaded several times on your website and many, tried several times to install.

  THIS CD DOES NOT CONTAIN WHAT THE LABEL SAYS WHAT IT SHOULD CONTAIN.

  I spent a lot of time on the phone with 'Technical Support' (telephone number 1-800-474-6836) and just got a huge evasive.  The best suggestion they could offer was that I should 'upgrade' my printer!  I know the printer is old, and I know that the printer itself is not supported.  However, I expect better than that of a software package that is supposed to take care this device on Windows 7 AIO.

  If I can't get this resolved successfully, I'll upgrade my AIO - but it WILL NOT BE ONE OTHER DEVICE HP!

  Hmm...  I have an Officejet 7410 similar, I used the same configuration file to install and have used it for a few years on my Windows 7 system.  A few questions:

  You have the printer connected by USB or network?

  You said that you had upgraded to Windows XP.  Was this a clean install on the XP machine?

  Are there any error messages during installation?

  There are a few things to try: If the printer is connected with USB, unplug it before you continue.  Navigate to the folder folder (open the Explorer and folder type in the address bar), look for a directory starting with 7z and a date corresponding to when you tried to install the printer.  Go to the util/ccc directory in the 7z... directory and run uninstall_L3, uninstall_L2, and uninstall_L1 files.  (This is the program of uninstalling the version of Windows 7, it might be more effective than the XP uninstall program).  After you run each file three batch restart the computer and log in as a user with administrator privileges.  At this point, run the Setup program.