Given to NINE DELL D620 from Ebay - experience Windows = 0.9 (CPU)! Can it be remedied with parameters of WIN7? I don't have to run the Performance tool to realize the computer was slow. Thank you

Similar Questions

• I have a problem when using Google Maps, at a certain point my custards computer window and says there is a problem with the display drivers and he recovered, but it is not. Problem does not occur with Int Explorrer, so I don't think it's the computer

  When using google maps via Firefox, after asking a place which is not the General section of North America who comes up regularly, the firefox screen becomes white with a narrow banner at the top. A message appears in the lower right corner that says something on display drivers having had a problem, but now have been recovered. However, the display is not recover and the message of the banner is that Firefox is not responding. When I go to restart Firefox if I'm about to restore, the page is still frozen.
  I don't think there is a problem with my computer because it doesn't happen if I used to go to google maps, then G-cards works normally.
  This phenomenon didn't happen before the last update Google or Firefox. I used Fiefox for some years and also Google Maps on previous computers and on this one and not had it before.
  It is a relatively young computer (Asus EeSlate 121) less than a year. I have used Firefox since I bought it and until recently had no problem with Google Maps.

  I solved it myself, after the 'note' that was FF/Mozilla, just as I finished my message, commenting on what it was that my system was, I wnnt back to check my plug-ins, etc. I downloaded the latest Java, the TWO 32-bit AND 64-bit versions and latest Firefox.
  Now everything works.
  Thank you
  B.

• Grandson ran unintentionally install Vista using Windows Vista disk and now I don't have anything in the computer before now. How can I recover the previous data?

  Original title: Everythinh went

  My grandson unintentionally (I think) installed my original disc of Widows Vista and apparently followed all the guests was, as all before today disappeared. How can I restore back to where was before this...

  Hello

  A System Restore Point does NOT restore to a previous operating system Installation.

  This is misinformation.

  You don't say how Vista has been reinstalled.

  Looking for a windows.old folder and if you find one, see if you can save your data from it.

  "How to restore your personal files after performing an installation of Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/932912

  If the above does not apply, you will need to use data recovery programs to recover your Date.

  http://www.Piriform.com/Recuva

  See you soon.

• Hi, I have an old version of CS3 and want to use again, but I don't have access to the computer more? What to do

  I have Adobe CS3, DVD and Cert, but I can not disable the old license that the computer is dead. I would like to re - use again on a newer PC. I asked Adobe in the phone and chat and says that I need to fix this on the forum ONLY.

  ???

  Unless it is a volume license, cat help should be able to reset your activation. If you contact Adobe technical support via chat and ask to reset your activations, then you can go back to have two available if you think you would like the opportunity to install again a backup facility.

  A single user license allows you to have the software installed and enabled on both machines, so unless you have already activated with two machines, you still have available activation.  So without taking any other action, you should be able to install and activate on the new computer.

  CS3 - http://helpx.adobe.com/creative-suite/kb/cs3-product-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS3 and CS4: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html

  If this results in volume licensing
  ----------------

  http://helpx.Adobe.com/x-productkb/policy-pricing/volume-licensing-site.html

  Volume License Activation number: https://forums.adobe.com/thread/1526938

• I currently use PS5 and LR5. If I subscribe to CC PS these new programs it integrates with my older versions, or I would have then two versions of each program on my computer?

  I currently use PS5 and LR5. If I subscribe to CC PS these new programs it integrates with my older versions, or I would have then two versions of each program on my computer?

  If you install the creative Cloud versions, you will have then two versions of the two. You can uninstall the old ones if you don't need two versions of each, but you must first disable them if you ever want to use them on another computer.

  Enable and disable Adobe products

• How to disable this function when I don't have access to the old computer (which is broken)?

  Hello

  Unfortunately, my computer is broken (SSID), so I can't disable the version of photoshop elements installed on it. I try to install photoshop on another computer and of course, she said something like: 'turn off first. But what if I don't have access to the computer broken? (The second license you get doesn't help: it is installed on another computer belonging to another Member of the family).

  Help appreciated!

  Kind regards!

  (Excuse the language mistakes - no native speaker)

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <==> NOTE DAYS AND TIME

  Serial number and activation support (non - CC)

  http://helpx.Adobe.com/x-productkb/global/Service1.html

• A tech saying they were from Microsoft called today stating that the computer was infected. Is - is this legitimate?

  Mirco soft tech?

  My wife received a call from someone who said they were from mirco soft and said the computer was they infected taked here in running a scan, which means it had the remote control of the computer, they took to a site web that wanted to sell a product to fix any info staff received a disconnected i line my question could they have obtained information from my computer and should I checked it by a technician of service to make sure.

  Jackson DonnaWoods Hello,

  It is a scam.

  Unless you have a contract to support prepaid with Microsoft, Microsoft doesn't call you, email you, or snail mail you about problems with your PC.

  I would certainly follow the advice of John John, because we do not know what happened when your wife has visited the Web site. By the way, I suggest you also change your password, sign in to your office computer and passwords associated with banking online, networking sites etc..

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• I'm trying to disable Photoshop 9 of my computer.  I have an Adobe ID, but do not know how to proceed.  Thank you

  I can't access the appropriate screen to disable Photoshop 9 from an old computer before loading on another.  Get the message400 error

  Thank you.

  9 Photoshop is Photoshop CS2. Activation servers were towed offline some time ago, and there is no requirement to disable CS2.

  A licensee of CS2, you can now download CS2 and use the number given on this page:

  https://helpx.Adobe.com/Creative-Suite/KB/CS2-product-downloads.html

  More instructions:

  Error: "Activation Server is not available. CS2, Acrobat 7, pass a hearing 3

• I just bought an Iphone 6s and not yet am possession of en from the Sim Card. Ook, do you know if I can use the phone including applications via Wifi and put the chip later? Thank you. Renault JL

  I just bought an Iphone 6s and not yet am possession of en from the Sim Card. Ook, do you know if I can use the phone including applications via Wifi and put the chip later? Thank you. Renault JL

  No, because if you bought a new iPhone, then you need a SIM card to activate it before you can use the wifi applications.

  This is a phone after all, you don't need a sim card any to be able to activate it.

• Hello Mr. Atul Saini. Thanks for this good information. I now find my product serial number lightroom 5. Now how to download on my computer again? Thank you very much. Kind regards, Philippe.

  I now find my product serial number lightroom 5. Now how to download on my computer again? Thank you very much. Kind regards, Philippe.

  See here for links:

  Lightroom 5.7.1 is now available

• Programs can not be started, or no response after the computer was not awake mode "Eve"

  Dear Sir.

  My lap top is under the VISTA system. Now the problem is that all programs can not be started or no response after the computer was not awake mode "Eve". I have to restart the computer to recover the computer to normal state.

  Please please let me have your advice to return to my email address: * email address is removed from the privacy *.

  Thank you very much!

  Eric

  Hi Eric,.

  You can follow these steps:

  Step 1: perform a clean boot to verify if an application or service is causing the problem.

  See this article for more information on the clean boot:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
   http://support.Microsoft.com/kb/929135

  Steps to perform a clean boot:
  a. click the ORB start on your desktop
  b. type msconfig in the search box and press ENTER.
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  c. in the general tab, click Selective startup.
  d. under Selective startup, clear the check box load startup items.
  e. click on the Services tab, select the hide all Microsoft Services check box and then click Disable all.
  f. click OK.
  g. When prompted, click on restart.

  NOTE: Please check that you start the computer in normal mode after a repair. Follow step 7 article.

  Step 2: Configure the power settings for keyboard, mouse, and other devices.

  a. Click Start, click Control Panel, hardware and sound, and then click keyboard.
  b. click on the Hardware tab, and then click the properties button.
  c. click Change settings.
  d. click the power management tab and verify that the allow this device to wake the computer is selected.
  e. If "Allow this device to wake the computer" was not selected, select it and click OK.
  Follow the same steps for the mouse as well.

  If the problem persists, disconnect all non-essential devices (printers, scanners, USB drives). Restart the computer with only the original mouse, monitor, and
  connected keyboard. If this solves the problem of sleep/wake, one of the devices was causing the problem. Replace a device at a time and test to see if the
  problem occurs again. Continue adding devices and testing until you find the device that causes the problem.

  Refer to this article for additional troubleshooting steps.

  
  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista:
  http://support.Microsoft.com/kb/950686

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The computer was restarted after a bugcheck. The bugcheck was: 0 x 00000116

  Hello

  I recently got a new PC, initially, I installed the Windows 10 and it worked quite well apart from crashing just by playing a game. Thought that accidents were due to Windows 10 I uninstalled Windows 7 from my old office and installed on the new desktop.

  Same problem with Windows 7, if I play Tera Online at some point which seems to be random, the system hangs, I get a black screen and press the power button for four seconds for the computer to shut down properly because it is not responding to something else.

  Interesting to note that other games (like Batman Arkham Knight) will work perfectly.

  The error that appears in the Windows Event Viewer is:

  The computer was restarted after a bugcheck.  The bugcheck was: 0 x 00000116 (0xfffff880060f9128, 0xffffffffc000009a, 0xfffffa800710f4e0, 0 x 0000000000000004). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 071415-8174-01.

  Download link for the dump

  Thank you for the help, I used the Debugging Tools for Windows to read my memory dump that led me to believe the error is caused by nvlddmkm.sys which seems to be among the NVIDIA drivers. This track seems to me the solution because I need to underclock my graphics card. This seems to have solved the problem, so I'll try to find a solution in other ways that the Microsoft Community as sounds more like a problem of material or at least a NVIDIA issue.

• The computer was restarted after a bugcheck.

  I get the following BSOD and error message resulting approximately every 10 days.  It seems more prevalent when I try to play a video from the browser, but it happened when I am just browsing the internet.

  

  The computer was restarted after a bugcheck.  The bugcheck was: 0 x 00000116 (0xfffffa80080be380, 0 x 0000000000000002, 0xfffff88003c92aec, 0 x 0000000000000000). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 020715-40185-01.

  You can download a zip file containing all my files current mini dump from here:

  https://onedrive.live.com/redir?RESID=6CBE36721A006FAF! 110 & authkey =! AMEI8sjZRhqgkT4 & ithint = the file % 2czip

  Any help would be appreciated.

  Thank you

  Bill

  Bill

  These accidents are called BCC116 and are associated with your video subsystem.  Please follow the instructions of this wiki

  
  

• HELP PLEASE! The computer was restarted after a bugcheck.

  I was hoping that someone could help me understand what is the cause. This has happened for the past 2 days on one of our servers. The server is a Windows Server 2008 R2 computer.

  That's the message in the event viewer:

  The computer was restarted after a bugcheck.  The bugcheck was: 0 x 00000050 (0 x 0000000000000001, 0xfffff800016d40cc, 0xffffffffffffffd0, 0 x 0000000000000000). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 030313-9156-01.

  This is the message that is displayed on windows re-opening after the accident:

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.272.7
  Locale ID: 1033

  More information about the problem:
  BCCode: 50
  BCP1: FFFFFFFFFFFFFFD0
  BCP2: 0000000000000001
  BCP3: FFFFF800016DE0CC
  BCP4: 0000000000000000
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 272_3

  Files helping to describe the problem:
  C:\Windows\Minidump\030413-8765-01.dmp
  C:\Temp\WER-83783546-0.SysData.XML

  Hello

  Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or cannot start Windows.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  For BlueScreen troubleshooting methods using BlueScreenView and MyEventViewer see my
  answers if this thread - top 3 RESPONSES (+ 1 other).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  --------------------------------------------------------------------------------------------------

  BCCode: 50 0 x 00000050

  References to Vista also apply to Windows 7.

  Have you recently added any hardware? Have you updated a driver just before
  These began? (Check control panel - updates of Windows to see if all drivers
  have been updated it there all the time, it started) main likely culprits are video
  pilot, other great drivers, memory and antivirus/antispyware/security products
  could be faulty as well as reader questions.

  Use the troubleshooter below and refer to the following message for pilots and
  memory when you get these sections and then return of the disease.
  game needed.

  BCCode: 50 0 x 00000050

  Bug Check 0 x 50: PAGE_FAULT_IN_NONPAGED_AREA

  PAGE_FAULT_IN_NONPAGED_AREA bug control has a value of 0 x 00000050. This indicates that invalid system memory was referenced.

  Important info if you received a STOP Code

  If you received a blue error screen, or a stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you have purchased
  Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  These actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  PAGE_FAULT_IN_NONPAGED_AREA parameters

  The following settings are displayed on the blue screen.

  Parameter	Description
  1	The referenced memory address
  2	0: Read operation 1: Write operation
  3	Address that referenced memory (if known)
  4	Reserved

  If the driver responsible for the error can be identified, its name is printed on the blue screen and stored in memory location (PUNICODE_STRING) KiBugCheckDriver.

  Cause

  Bug control 0 x 50 usually occurs after the installation of a faulty hardware or installation failure of material (usually associated with defective RAM, either main memory, L2 RAM or RAM video cache).

  Another common cause is a defective system service installation.

  Antivirus software can also trigger this error, as can a corrupted NTFS volume.

  Resolution

  
  Fix a defective hardware problem: if the material has been added to the system recently, remove it to see if the error recurs. If the hardware failure existing, remove or replace the faulty component. You must run the diagnostics of material provided by the manufacturer of the system. For more information about these procedures, see the manual of your computer.

  
  Fix a defective system service: disable the service and confirm that this resolves the error. If so, contact the manufacturer of the system service on a possible update. If the error occurs during the system startup, restart your computer, and then press F8 to menu mode characters that displays the choice of operating system. In the Windows Advanced Options menu that results, select the last known good Configuration option. This option is most effective when a pilot or a service is added at a time.

  
  A problem of antivirus software: disable the program and confirm that this resolves the error. If this is the case, contact the manufacturer of the program about a possible update.

  
  Fix a corrupted NTFS volume: run Chkdsk /f /r to detect and repair disk errors. You must reboot the system before the start of the analysis of disk on a system partition. If the SCSI hard disk, check the problems between the SCSI controller and the drive.

  Finally, check the system log in Event Viewer for additional error messages that might help determine the device or driver that generated the error. Disable the cache in memory of the BIOS might also resolve it.

  Remarks

  In general, this address is in the released memory or simply not valid.

  This cannot be protected by a try - except Manager - it can only be protected by a probe.

  BCCode: 50 0 x 00000050<-- read="" this="">
  * 1095.html? order = votes http://www.faultwire.com/solutions-fatal_error/page-fault-in-NONPAGED-Area-0x00000050-

  =========================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• The computer was restarted after a bugcheck. The bugcheck was: 0x00000001 (0 x 0000000000000000, 0 0000000000000001, 0x00000000742d2e09, 0xfffff8800aa00b60).

  Computer BSOD'd 2 x today.  The event log States:

  The computer was restarted after a bugcheck. The bugcheck was: 0x00000001 (0 x 0000000000000000, 0 0000000000000001, 0x00000000742d2e09, 0xfffff8800aa00b60).

  LEAPC_INDEX_MISMATCHERREUR (1)
  This is an internal error in the kernel. The most common reason to see this
  error checking is when a file system or a driver has several mismatched
  visits to disable and re-enable the TTB. The data key item is the
  Thread-> CombinedApcDisable field. It's two separate 16-bit
  the SpecialApcDisable and the KernelApcDisable fields. A negative value
  either indicates that a driver has disabled APC normal or special
  (respectively) without reactivation; a positive value indicates that
  a driver allowed normal or special APCS (respectively) too many times.
  Arguments:
  Arg1: 00000000742d2e09, address of function or worker system call
  Arg2: 0000000000000000, thread-> ApcStateIndex
  Arg3: 0000000000000001 (thread-> SpecialApcDisable < 16)="" |="" thread-=""> KernelApcDisable)
  Arg4: fffff8800aa00b60, call type (system call 0-, 1 - routine worker)

  Debugging information:
  ------------------

  TRIAGER: Could not open the file of triage: e:\dump_analysis\program\triage\modclass.ini, error 2

  FAULTING_IP:
  + 0
  00000000' 742d2e09?              ???

  DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

  BUGCHECK_STR: 0X1

  Nom_processus: ccSvcHst.exe

  CURRENT_IRQL: 0

  LAST_CONTROL_TRANSFER: from fffff800032841a9 to fffff80003284c00

  STACK_TEXT:
  fffff880 '0aa00928 fffff800' 032841a 9: 00000000'00000001 00000000' 742d2e09 00000000'00000000 00000000'00000001: nt! KeBugCheckEx
  fffff880 '0aa00930 fffff800' 032840e0: 00000000'00001 c 48 00000000' 0780e0a8 00000000' 0780e970 00000980'00000018: nt! KiBugCheckDispatch + 0 x 69
  fffff880 '0aa00a70 00000000' 742d2e09: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: nt! KiSystemServiceExit + 0 x 245
  00000000' 0780e9b8 00000000'00000000: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: 0x742d2e09

  STACK_COMMAND: kb

  FOLLOWUP_IP:
  NT! KiSystemServiceExit + 245
  fffff800'032840e0 4883ec50 sub rsp, 50 h

  SYMBOL_STACK_INDEX: 2

  SYMBOL_NAME: nt! KiSystemServiceExit + 245

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: nt

  Nom_image: ntkrnlmp.exe

  DEBUG_FLR_IMAGE_TIMESTAMP: 5684191c

  FAILURE_BUCKET_ID: X64_0x1_SysCallNum_4_nt! KiSystemServiceExit + 245

  BUCKET_ID: X64_0x1_SysCallNum_4_nt! KiSystemServiceExit + 245

  These accidents were related to the corruption of memory (probably caused by a driver).

  Run these two tests to check your memory and find which driver is causing the problem.  Launch auditor.  You don't need to run memtest again unless the auditor is not the cause, or you want to.

  If you are overclocking anything reset by default before running these tests.
  In other words STOP! If you don't know what it means that you're probably not  
  
  
  
  
  1-Driver Verifier (for full instructions, see our wiki here)
  
  2-Memtest. (You can learn more about running memtest here)

  Former pilot who need update

  dne64x.sys (Cisco VPN driver since 2008)

  If you continue to plant I remove Symantec and using MSE instead

  Symantec is a common cause of BSOD.

  
  
  I remove and replace it with Microsoft Security if you are using Windows 7 and if you win 8 or higher, use the built-in Defender.
  
  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20080710133834EN
  http://www.Microsoft.com/security_essentials/

  Use it to Norton 360 http://Symantec.pcperformancetools.com/Norton-360-how-to-uninstall.html