GNU versus LabVIEW radio

Similar Questions

• Speed of playback step by step closed-loop

  Hi all, I have a servo motor driven by a 340 Gecko, so basically my PCI-7344 sees him as a climber.

  This issue has been resolved at the following link:
   http://forums.NI.com/T5/motion-control-and-motor-drives/Max-versus-LabVIEW-axis-configurations-Getti...

• LabVIEW 2012 has radio for Boolean control button by default

  Using LabVIEW 2012 SP1 at a customer.  Whenever I create a Boolean control or indicator by right-clicking and selecting 'create', the annoying option button appears...  Yes... one in the picture below.  All I want is one of the lights (round or rectangular).

  I know it takes a ridiculous affecting somewhere.  To save time, but especially of frustration, where hell can I change this setting?  I already looked at the Option settings but don't see anything.

  That's what I get:

  

  This is the system default boolean for a reason any crazy.  I learned to curse under my breath and find the prices for the use of system controls.

  Edit: change the style by default to say, modern or classic and it won't happen.  Unless you use the classes so what control you get when you create controls/indicators is a boring montage.

• The USRP CSD requires the LabVIEW Communications?

  I recently installed LabVIEW 2013 on my machine, as well as a whole bunch of toolboxes:

  LabVIEW English 2013
  VI Package Manager
  Module LabVIEW Control Design and Simulation 2013
  2013 LabVIEW Datalogging and Supervisory Control Module
  2013 LabVIEW MathScript RT Module
  NI LabVIEW 2013 LEGO (R) MINDSTORMS (R) NXT Module (in English)
  Module OR Vision Development 2013
  Module LabVIEW FPGA of 2013 (English)
  Xilinx toolchain 14.4
  Module time real LabVIEW 2013 (English)
  2013 LabVIEW Touch Panel module
  2013 LabVIEW Robotics module
  Software OR SignalExpress 2013
  LabVIEW Sound and Vibration Measurement Suite 2013
  Module LabVIEW Statechart of the 2013
  LabVIEW 2013 for myRIO Module
  Toolkit OR run real time Trace 2013
  2013 LabVIEW System Identification Toolkit
  LabVIEW Toolkit 2013 Digital Filter Design
  4.3.4 for LabVIEW Modulation Toolkit
  2013 LabVIEW VI Analyzer Toolkit
  2013 LabVIEW Database Connectivity Toolkit
  2013 LabVIEW Report Generation Toolkit for Microsoft Office
  LabVIEW Spectral Measurements Toolkit 2.6.4
  2013 LabVIEW Advanced signal processing Toolkit
  LabVIEW 2013 PID and Fuzzy Logic Toolkit
  Kit filter LabVIEW Adaptive, 2013
  Toolkit LabVIEW DataFinder of the 2013
  2013 LabVIEW Desktop Execution Trace Toolkit
  LabVIEW 2013 Multicore analysis and matrices hollow Toolkit
  LabVIEW 2013 power electric Suite
  Toolkit LabVIEW 2013 GPU analysis
  Biomedical Toolkit LabVIEW 2013
  Module LabVIEW 2013 OR SoftMotion
  NEITHER Motion Assistant 2013
  NEITHER Vision Builder for Automated Inspection 2012 SP1
  OR DIAdem Professional 2012 SP1 (English)
  LabWindows/CVI 2013 development system
  Module time real LabWindows/CVI 2013
  LabWindows/CVI Spectral Measurements Toolkit 2.6.4
  Spectral measures of LabWindows/CVI DURATION 2.6.4
  LabWindows/CVI SQL Toolkit 2.2
  Toolkit for processing Signal of LabWindows/CVI 7.0.2
  LabWindows/CVI PID Control Toolkit 2.1
  Execution of LabWindows/CVI Profiler 1.0
  Measurement Studio Enterprise Edition for Visual Studio 2012 2013
  General safety NI Patch 2nd quarter of 2013
  NEITHER TestStand 2013
  NEITHER ELVISmx 4.5
  NOR-DAQmx 9.7.5
  Xilinx 10.1 Compilation tools (requires the build tools additional Xilinx DVD)
  Device drivers or - February 2013

  I tried to follow this tutorial with the USRP 2932, coming soon, but I found out later that I have seem to have none of the LabVIEW Communications. No not those who prevent me from using the USRP radio? If not, then is there any restrictions on what I can do with the radio without communication?

  Hi BreadLB,

  The link to the tutorial you posted is based on LabVIEW Communications System Design Suite, a new software environment designed to accelerate the prototyping of the algorithm and stable air.  It is a completely separate and independent of LabVIEW environment.  See my post here for more details.  You can also download a free 30 day trial copy here.  Your hardware is supported with LabVIEW and LabVIEW Communications.

  The 2932 NOR is a network based USRP, and there a small on-board FPGA.  For this reason, the FPGA on that specific product is not a target of LabVIEW FPGA.  The NI 294 x / 5 x family has a large Kintex 7 FPGA and can be programmed using LabVIEW FPGA and LabVIEW Communications, as in the tutorial you posted.  The 2932 OR can be used with your host PC and LabVIEW for a variety of applications.  Unfortunately the tutorial that you have linked to your post requires the NI 294 x / 5 x hardware and Communications of LabVIEW.  If you have questions about a specific application for your 2932, please post more details and we would be happy to help you.

• resize the radio button

  Hello

  How to resize the radio button face before image.i am using labview 8.6

  "" To create a resizable option button, right click on the option button control and selectreplace"classic"Boolean Classic'Round/Square option button. "" You can also place a Radio button Classic Round/Square directly on the front panel or in the box of radio buttons by right-clicking on the front panel to display the controls palette and selecting classic "Boolean Classic'Round/Square option button. This new radio button is now resizable.

• LABVIEW, RFID AND MICROSOFT ACCESS

  One is designing a plan combining Labview, database of microsoft access and RFID (radio frequency identification)?

  No doubt.

  Edit: To get more useful answers try to ask a more specific question! To speak with access with LabVIEW, try the database tool or the box tool free LabSQL.

• Unable to create a file with "nidll_vxworks" in Matlab for use with the LabVIEW SIT 2010 and a cRio 9073, error sh.exe

  I am trying to compile an OUTPUT for my Simulink model file by using "nidll_vxworks" and execute it using the Simulation Interface Toolkit for a cRIO 9073. I am able to compile the DLL file by using "nidll" and managed to run the simulation using my PC as a host.

  I have already downloaded the files "gccdist" and "vxworks61gccdist" and copied in "c:" when I build the model in Sumulink I get the following error at the end of the process (at the same time windows tells me that "sh.exe" has stopped working). If it's important, I'm on Windows 7 64-bit, but using Matlab 2009 b 32bits and LabView 2010 32-bit. ANY HELP WILL BE APPRECIATED. "QofV" is the name of my Simulink model and I changed to parts of "XXX" in the path of the file.

  6.1 CCG is only supported on Windows XP.  It is almost indicated in the readme_sit_vxworks.txt found in C:\SimulationInterfaceToolkit\xxxx\VxWorks (where xxxx is the version of the DIS).  It is said:

  * Known issues
  
  ---------------------------
  
  -WindRiver GNU Toolchain 6.3 and 6.1 do not work on Windows Vista.

  To be more explicit, it should be "Vista and later.

  Carl L

  National Instruments

• Cannot control the color sensor in LabView for Mindstorms

  Hello!  New here.

  I'm currently boning on LabView via 'LabView for Lego Mindstorms' for a possible job in the near future, and I encountered a problem from the beginning.

  I am programming my brick Lego of LabView to simply activate the color sensor which is quite easy: I'm building a while loop and inside I have a block of color sensor attached to a block of text that displays the light intensity of the probe in the text on the brick.  I compile and run the detector turns on and I can read the intensity constantly updated on the brick.  This part works fine.  I would now like to control the light sensor (that doubles as a light source with color LEDs) on the front of the LV Panel.  The book I'm using (LabView for Lego Minstorms) says I should block sensor on the entry "generate light' do right click and choose"Create--> Control"in the menu that appears.  A Boolean command button should appear connected to the sensor block in the block Panel and a push button should appear in the front panel.  This is not what is happening.  Here, the two things are different.

  (1) I have no port "generate light" click on right-click.  This is probably using a version more day of Mindstorms that uses of the book.  It's a matter of book/Mindstorms, which probably cannot be resolved here but I hope that the next issue of problems will make it irrelevant.

  (2) I right click and create the control, but rather than create a Boolean command button as the book predicts, it creates an icon "BrickReference.lvclass".  He connects very well with the light sensor and a corresponding block is created in the front panel, but it is a paper weight that I can tell.  I can't do anything with it.  There are no buttons to push, no slider, button, button radio etc and I can't seem to change into something that somehow work.  I have delete and don't create a no kidding Boolean button from the library, but it does not connect to the photoelectric cell and so I can not compile.  So now, I'm a little stuck.

  I searched "Reference of the brick" online in the context of LabView class and have found little or nothing that talks about its definition or how I can use it to control the light via the front panel sensor.  Help with the software section is not much help, and yet I'm sure there must be a way to control a simple Lego light sensor of the façade for debugging purposes and others.

  If you know what I'm doing wrong or if you know a finish around this issue that will allow me to control a Mindstorms brick from the front in this way, please let me know.

  Thank you!

  Try to post in the forum of Lego.

  http://forums.NI.com/T5/LabVIEW-for-LEGO-MINDSTORMS-and/BD-p/460

• Radio control

  Suppose I want to use a boolean/radio control in the façade in order to activate certain inputs i.e. If radio has some value so I need to get into a game of entries and if radio has a different value, then I need to enter another set of inputs. For example, consider a remote control with values 'BUS' and 'MOUNTAIN' If the BUS is chosen, then the data entries should be mileage, speed, etc. and if MOUNTAIN is chosen, then entered must be must be height, etc. How this can be implemented in LABVIEW?

  Dhiraj072 wrote:

  Suppose I want to use a boolean/radio control in the façade in order to activate certain inputs i.e. If radio has some value so I need to get into a game of entries and if radio has a different value, then I need to enter another set of inputs. For example, consider a remote control with values 'BUS' and 'MOUNTAIN' If the BUS is chosen, then the data entries should be mileage, speed, etc. and if MOUNTAIN is chosen, then entered must be must be height, etc. How this can be implemented in LABVIEW?

  Hope this answer. Let me know if that answers

• How to create the stereo car radio interface

  Hello, I'm new to LabView and I am trying to simulate the interface with a radio in LabView 2009. I can't not peculiar looking for radio station and scan functions. I started with a digital control the top and bottom search function to find a "radio station". However, I would like that to incorporate both seek and scan controls, but I'm not sure how to build my own control that would do this. I thought somehow two controls of building that would be present on the VI interface, with one control acting as the seek function and another control acting as the function and then scan their wiring both to the digital "radio station" indicator, but I'm not the best way to implement this. Any help would be appreciated, thanks. -Cheuk

  You must put the code inside the loop, otherwise it gets only read at the beginning of the program. You must also use a shift register to keep track of the current station. Attached is a change that made just the look down. See if you can understand how to add code.

• Need help on how to make dll with VC ++ 2008 for Labview function liblary

  I use VC ++ 2008Express and you want to make the DLL.

  Since I'm using VC ++ 2008, do I have to install the 'MS redistributable"on PC what dose does not have VC ++?

  Is there any free ANSI C compiler do DLL for Labview for use with the function call in libraly?

  Yes, you will probably need the Redistributable Package. Remember to distribute the "Final" of the DLL and not the "debug".

  Regarding the free ANSI C compilers, I'd do a Google search. GNU C/C++ is a very popular.

• Cluster (buttons and the radio channel controls) - select the right file

  I have a list of text files and I need to select and open an of based on radio button selection.  How to sync the radio button with control of the chain so that I can get the name of the control of the chain and open the right file name?

  The attached vi does not work as I would like.

  Edit: Or is there a better way?

  Depends on the source of the list of files.  If you embed it in LabVIEW via a table or another method, then obviously a recompilation must be made.

  If the list of files will come from a specific directory, then simply read the list of the files from there when starting of the VI (see example).

  Or you could store the list in the text file and read the file at the start of the VI.  You can edit the text at any time without recompilation.

• The instantiation of the indicators of labview or sub - VI?

  Is it possible to create multiple instances of a LabVIEW indicator or sub - VI while the first level VI is running?

  Here's what I'm trying to do:

  I have a network of wireless acceleration sensors all monitored by a LabVIEW VI. Each sensor sends packets to the VI containing the ID of the sensor, status data and acceleration sensor. I have a Subvi, which displays the data (using a graph) and status information for a single radio. I want to set up my main VI so that whenever the sensor module connects to the network, it may create an instance of this sub - VI for that particular sensor. Is it possible to do something like that?

  I hope someone can point me in the right direction.

  Thank you

  Mike

  Hello

  To create instances of a Subvi, access the properties of VI of Sub VI (by clicking with the right button on the VI icon on the right top corner) > execution > re-entrant execution. Mark this option and drop your Subvi wherever necessary. Whenever it is used, a new instance is created. You can also try a file .lives (model VI) who works in the forums.

  Kind regards
  Amine31

  (Bravo to give good answers, mark it as a Solution If your problem is resolved)

• Intel ac 7260, radio, win7 64 bit, compaq 15-a026sg

  An operating system is and must be Win7 Ultimate 64 bit sp1
  Computer: Compaq 15-a026sg, i5 - 3230 m.

  I changed the standard map for intel ac 7260 because it was a lot of problems with the old connections to the card (breaks or sometimes 5 Mbps and sometimes 1 kbit/s) and a lot of people with a similar problem with this model.

  I also have Ubuntu and new card wifi (intel AC 7260) works well with this system on this computer.

  With Windows 7, I see my card in 'device manager' (sorry, but I am from Poland and my OS is in German and I don't remember the English names) but I can not not for this light with an F12 key.

  Parameters:
  Gerät, 2 PCI bus 0, function 0.

  Intel (r) Dual Band Wireless-AC 7260
  PCI\VEN_8086 & DEV_08B1 & SUBSYS_40708086 & REV_BB
  PCI\VEN_8086 & DEV_08B1 & SUBSYS_40708086
  PCI\VEN_8086 & DEV_08B1 & CC_028000
  PCI\VEN_8086 & DEV_08B1 & CC_0280

  It's this map: http://www.amazon.de/dp/B00E7QGHE6/ref=pe_386171_51767411_TE_M3T1_dp_1

  Which driver should I use and what I need to do step by step, please?

  Ok. Now, I have a solution: https://www.youtube.com/watch?v=yzAKcmlaH1M

  Covering 20 PINS with a Ribbon according to the film and a LED in the f12 is still orange, but the card now works under Windows 7 64-bit. I didn't try it with this card, but by another at work (Intel ultimate-n 6300) and is OK.

  http://h30434.www3.HP.com/T5/wireless-Internet-home-networking/Intel-ultimate-n-6300-radio-off-Win7-64bit-Compaq-15-a026sg/m-p/4715378/
  This means that in the BIOS there is a whitelist and it is a problem only on Windows and not on GNU/Linux:-D.

• Intel ultimate-n 6300, radio, win7 64 bit, compaq 15-a026sg

  An operating system is and must be Win7 Ultimate 64 bit sp1
  Computer: Compaq 15-a026sg, i5 - 3230 m.

  Intel Centrino Ultimate-N 6300 AGN card:
  PCI\VEN_8086 & DEV_422B & SUBSYS_11018086 & REV_3E
  PCI\VEN_8086 & DEV_422B & SUBSYS_11018086
  PCI\VEN_8086 & DEV_422B & CC_028000
  PCI\VEN_8086 & DEV_422B & CC_0280

  The map works without problem in Ubuntu 14.04 on this computer and running Windows 7 (64-bit), I see only key f12 with orange LED.

  The same situation on this laptop is with intel ac 7260 (' http://h30434.www3.hp.com/t5/Wireless-Internet-Home-Networking/Intel-ac-7260-radio-off-win7-64bit-c,').
  Maybe someone knows what card works fast and stabile with this laptop, please?

  Ok. Now, I have a solution: https://www.youtube.com/watch?v=yzAKcmlaH1M

  Covering 20 PINS with a Ribbon according to the film and a LED in the f12 is still orange, but the card now works under Windows 7 64-bit.
  This means that in the BIOS there is a whitelist and it is a problem only on Windows and not on GNU/Linux:-D.