Go to a specific line on the loading of the page

Similar Questions

• Spacing of lines in the Pages

  I have major problems with the spacing of the lines in the Pages 5.6.1. The default setting is '1', suggesting no doubt single spacing, but it is much broader than that should generally be understood by this term. For example if I type high address of the recipient on the left, using a reasonable font size the entire address comes out much too deep to fit in a standard A4 envelope window. I have to manually select, define Style - line spacing IE 4pt. I have to do this every time I write a letter (and I write a lot of letters). This has never been a problem in AppleWorks.

  IF anyone knows how to get around this, I would be grateful to know. Thank you.

  1 LineSpacing depends on the font size.

  You must define the spacing 'Exactly' and also check if there is before or after paragraphs spacing that pushes the lines apart.

  Peter

• can I put a specific point on the page to go with a button?

  I got a page of 1024 x 3072 and I put a button to go to a specific point on the page, for example, to 650px to 724px just using a button.

  So my question is can I do it?, how?... Thank you

  Not supported.

  Bob

• Have blank lines on the page open automatically

  Hello
  
  Is it possible to have empty lines when the page is rendered as a table? It is a wizard that is generated in a table.
  
  Thank you
  Mary

  Create a process
  Choose the type of data handling processes
  Select Add lines slot table form
  Select on the laundry front header
  Enter the number of lines to add

  Kind regards
  Shijesh

• How to determine a specific line in the table clicked on

  Hello-

  I need to determine the specific line of a table control that is right-mouse-clicking.  I think that this is possible by using the context Menu Activation? event for the control of the table and get the vertical coordinate in the Coords filter options.

  

  He is performing experiments to determine the vertical amplitude of each row in the table, or maybe in determining the width of a line and using a linear relationship to determine the possible range of the following lines.  Do you feel it is the best strategy or is it maybe an another easier way to get this information?

  Thank you

  Don

  You can use the CtlRef with the Point in the array to the method line for the information.

  Ben64

  

  I was too slow to respond...

• Add data at the end of a specific line in the text file

  Hello

  I'm trying to add data at the end of the last 4 lines of the text file attached with the ' table to add.  4 rows (422.5800 entry), I would add the first entry of the 'Array to add' entry, on the 5th line to add the second entry of the 'Add picture' and so on.  How can I do this?

  Any help will be appreciated.

  Sincerely,.

  hiNi.

  After re-reading your post, I think that's what you really want to start adding after the first 4 rows.

• After the installation of update ver14.0.1, when you print a page on aweb site, why is that each line of the page to be printed each line on a separate page? !

  Each line in the document is printed on a separate page, IE: ten lines will print 10 separate pages for printing.

  Try of the reset described here:
  
  http://KB.mozillazine.org/Problems_printing_web_pages#Reset_printer

  Make sure that you reset all the print preferences.

• 7520 all-in-One: 7520 all-in-One scanning now a straight line of the page when using the ADF

  A week ago I noticed that the analyses using the ADF put a black line about an inch from the right edge of the page.  This will not occur during the analysis of flat glass; only when you use the ADF.  I checked the glass and paper tray are clean and free of debris.  I wish that it there a way to display an image of what I'm talking about.

  The line is about the thickness of a vertical margin of Notepad and gray line.

  Someone at - it ideas other than buying another printer?

  BINGO!  That's all.  The glass was dirty.  Thank you very much.

• Color printing: the print has colored lines across the page viertical obliterate the copy.

  I have a printer Officejet Pro 8600 working with my vista 32 bit.system.   My copies of original color print color strines vertical on the page. I have cleaned the print heads and aligned. Everything prints fine other circuits. What is the problem? Is there a solution? Is - it physical hardware or software?

  I understand that your copies have vertical lines through them. I have a useful document that might help.

  Click here for the document.

  Let me know if it helps.

• HP C5380 all-in-one printer: a thick black/gray line down the page when scanning.

  1 HP Photosmart C5380 all-in-One Printer

  2. Windows 7 64 bit

  3. no error is, as usual but preview and print with a dark gray line / think through the page.

  4. I got a new monitor.

  How can I fix?  the optical reading area is clean, no dust or dirt present and it just started this without reason. The connections are good, I unplugged and plugged the cables of the computer and the printer and the problem is still there.

  When I scan the document line is present and even when I print the line appears on the printed page is not my screen.

  

  bbjae, it looks like there may be a residual electric charge accumulated in the unit.  When was the last time you did a Hard Reset on this unit?

  Hard Reset:

  * Unplug the unit while the printer is on

  Disconnect the other end of the power cord from the wall jack directly

  * Wait 30 seconds

  * Plug power back in and make sure that the device is running

  So, it is a document with the steps to help fix the vertical lines and scratches in the copies or scans, click on the link below:

  http://support.HP.com/us-en/document/c01887471

• Place executives of texts related to specific coordinates to the page

  Hello!

  I'm after a script or another solution to automatically move the blocks of text to the specific X/Y coordinates on a page. I know it's possible with text anchors, but in my case, there is no text to attach the frame too. It's only a block of text on the page and I want that it align on a specific spot on each page by running a script or by applying an object style. It's 1 million pages, so do manually is a very time-consuming procedure.

  Rune

  While the equalizer is certainly worth a loook for the time being, you can try this:

  app.doScript (main, undefined, undefined, UndoModes.ENTIRE_SCRIPT, "Move Textframes")
  
  function main() {
       app.findTextPreferences = NothingEnum.NOTHING;
       app.findTextPreferences.appliedParagraphStyle = app.activeDocument.paragraphStyles.item("dings");
       var hits = app.activeDocument.findText();
       for (var n = 0; n < hits.length; n++) {
            var tf = hits[n].parentTextFrames;
            if (tf.length > 0) {
                 tf = tf[0];
                 tf.move( [0,0] );
            }
       }
  }
  

  With the name of your paragraph style, replace 'bumps '. Replace "[0,0]" with your details

• HTML/CSS code for the length of the line on the pages.

  Quick question for anyone who wants to help. I need to cut down on the length of the line on some of my pages (on the pages of report under the table of the contents of the navigation tab). I'm pretty good with the coding, but for some reason I can't it works. Thanks to you all.

  Site URL: litterdatas.com/businesscatalyst.com

  Hello christevenson,

  Looks like your template is missing a div or two. If you wrap your page content in the div:

  {tag_pagecontent}

  It will focus your content and give it a width of 940, as well as the white bg. If you then change the color of your text.

  If you don't want the white bg, do not use id = div surrounding 'main '.

  This should fix the length of your lines.

  You can also use

  ,

  Tags for paragraphs and topics instead of just using bullet points for the content of the page.

  Hope this helps,

  Chad Smith | http://bcgurus.com/Business-Catalyst-Templates for only $7

• CFDOCUMENT cut the last and the first line in the pages

  Hello, all:
  
  I use the CFDOCUMENT tag to create a pdf file. It's a line of simple text and images (for example, width = height 58 = 58). All right,
  but the last line and the first line fell by half. The line is half pages.
  I have download correction [hf701 - 60212.zip], but have the same problem.
  
  Please tell me how to set the page layout?
  I use windows XP. the text is displayed as < PRE > tag, pictures < IMG SRC = "" * "width = height 58 = 58 >."
  
  Kind regards
  

  There are several fixes to this problem. Latest fixes just be published in the last several days. If you use cfmx7.01, you must apply the hotfix in this technote. This fix should be used even if you have applied the hotfix rollup 2 for 7.01 or you apply the individual hotfix (hf701 - 60212.jar) prior to 04/08/2006.

  If you use 7.02, you must apply the fix of this technical note. Apply the additional fixes to cfdocument, he released with 7.02.

• How can I use applescript to move objects to a specific position on the page?

  I have a PDF file with a bunch of items of text on each page, but the margins are irregular.  I want to automate the following process:

  1. Select all the objects on the page

  2. move objects (such as a group, i.e. preserving their arrangement relative to each other) until the upper left corner of the object of most of the top-left {. 67 ", 1"} from the upper left corner of the page.

  3. go to the next page.

  4. Repeat steps.

  I work on a mac, and I see that Acrobat is scriptable using Applescript.  Is it possible to do it with this?  If there is another way to describe this process without Applescript, I'd be open to that as well.

  Thank you very much.

  Acrobat has no interface for scripts change the position of an ordinary object.

• How can I get the top lines of the page, I have my toolbar back? The first line starting with 'file' on the right and the second line which contains the refersh button as well as the search bar disappeared. How to make a comeback?

  The first two lines of my toolbar disappeared. I find myself with most visited but the lines above, containing the button refresh, bookmarks, and search bar and above the one containing the links to the files, etc are passed, how do em back?

  == I was juggling the different bars and must have clicked smth, that I should not have.

  ALT V
  T
  M

  Don't forget to do this in a new empty tab.