Color printing: the print has colored lines across the page viertical obliterate the copy.

Similar Questions

• My printer has left the copy. It has dark lines across on the page.

  I have a printer/C309 Photosmart Premium Web.  Recently, he stop making copies readable and done the same thing on the scans.  I tried to close all and which did not help.  I can get the printer to print a test page.

  My OS is Windows 7 32 bit.

  Hello mojedo

  Please try the following article. It can help to solve the issue you.

  Streaks or lines in Copies or Scans

• OfficeJet Pro 8500 has vertical line from top to bottom after a copy or scanning via adf

  Each copy or scan do using the automatic document feeder to my HP Officejet Pro 8500 a shows a vertical line from top to bottom left of each page. I have cleaned the printer at all parts of the feeder, - nothing dirty in fact found. When I copy or scan the glass plate there is no vertical line on paper.

  Anyone have the same experience with this printer?

  Usually if the scanner works on the dish, but product line in the scans from the ADF, it's because of something on the glass.  Have you tried to shine a flashlight down on the surface of the small approximately 1 in. piece of glass on the left side of the bucket?  This is the strip of glass used for the ADF.

  Like trying to clean the white strip, located on the lid above the glass of the ADF, well clean to make sure there is no debris on the support that can cause this line appears.

  * Make sure that the printer is plugged into a direct socket, rather than a surge protector.  The 8500 has protection against overvoltages integrated in the device and an another surge in the circuit protector can sometimes cause lines.  However, usually this causes lines in both ADF and flatbed scans.

  There is also a document provided by HP with the steps to troubleshoot issues when a line is present in the copies/scans.  The document can be accessed here.

  I hope this helps.

• Black line through all pages HP Officejet 8500 A909a

  We've had this printer for some time at the office and not even a week ago, he started printing with a black line across all pages. Normally, that would be a problem with the head of the cleaner. FAKE! He is not the head of the cleaner. It will print the computer without the black line, and when something is printed glass monitor it won't be a black line in my documents. The only time where it appears is when I print copies of the Lac. It also occurs when we fax some of our documents to some of our major customers and businesses.

  We NEED this to work. What could be the problem? It must be well fixed as SOON AS POSSIBLE! It is urgent that I get a response on what I can do for this printer. Faxes should be sent each day of our office. I have just files accumulate on my desk. Help!

  Thank you!

  There is a small section (about 1 "wide) of glass which is used for the ADF to scan.  It's just to the left of the main window, see this post for more details.  A stain on the glass turns into a line, as the paper is fed through the document feeder.  This section of cleaning should solve the problem.

• HP Envy 5532 Printing green lines across the page when scanning in color

  Hi, I'm Green striped wallpaper is the best way to describe it, when I scan a document color the entire page has this striped background green and the image being analyzed. The printer is around the age of 18 months.

  I tried all the diagnostic tools that are available through the printer, nothing seems to clear it.

  Any suggestions?

  Hey @thelentons,

  Welcome to the HP forums! I hope you enjoy your stay here.

  I understand that your e-all-in-one printer of 5532 Envy is scanning with green lines. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet , not a surge protector. Once it's done remove any paper flat from the printer and turn the printer off, then on again. Finally we will try to make a copy. If the copy has lines so you have a hardware problem. If you are able to make a copy without lines so you can have a software problem.

  If you have a hardware problem

  While the printer is turned on remove the cable at the back of the printer for a minute, turn on the printer and try to make a copy.

  If the copy always has lines in it then we will make a factory reset the printer. I'll send you some pointers on how to do so shortly in a private message.

  If after the reset you still have lines in print then the printer needs to be replaced. You can contact HP support by clicking here and filling out the form below.

  If you have a software problem

  I can provide you with more information, but I need to know what operating system is on your computer. If you are not sure what your operating system is you can click here to find. Please let me know what you use, and I'll be better able to help you.

  I hope this solves your problem of copy and wish you a nice day!

  If this solves your problem then please help others to find this post by clicking on accept as Solution on my post.

  If you appreciate my help so please let others know by clicking on the icon below my post thumbs up.

• Printing printer Lexmark 2600 problems - it prints half a line after replacing the color cartridge

  It prints half a line, if the top or the bottom of it and the cutting of the other party.  This happens on every third line.

  This started happening when I replaced a color cartridge and ran the alignment page.  Before replacing the cartridge, it prints very well (except that the color cartridge started missing).   When I noticed what was going on, I took both cartridges on and then put them back in and had to print the alignment again page.  Yet the problem persists.
  I checked the Device Manager, and my drivers are up to date.  I also checked all connections.
  Any suggestions are welcome.

  Oh boy.  I don't know what I thought.  It just had to unplugging everything & then reconnect them, turn off & on.  This took care of it - seems so simple now.

  I guess it was my new laptop which has the printer all confused.  Win7, my find of CL.

  Insofar as the Lexmark support, I have not yet that day.  In any case, it comes to X 2690 model I had for centuries, so I guess that support would be of any help.  I mean, the guarantee missed a long time ago.

  Thank you for taking the time to answer.

• L7680 4 in 1 printing of the colored lines problem

  My L7680 print incorrectly colored lines.  Seems to be most of the lines with a red component.  A 8 x 10 color photograph prints quite correctly.  All the diagnostic tools, clean/align/etc. also print correctly.

  All ink cartridges are full, but I noticed a page of test a cartridge and a print head are not original HP.  Absolutely false, I've never changed one of the printheads and the cartridge which was also noted (I forgot the correct term) was magenta and basically brand new (and a HP!).

  This suggest anything to anyone?  If so, of course, be happy to hear from you.

  Dave

  You print the page of diagnosis with the three different test modes? I look over this document here and go on the steps you have performed not listed since it is the document that takes account the results of poor quality for your printer model. I'd also give the contacts on the cartridge manual cleaning as well as those on the print head. Page 147-150 on the Manual shows manual cleaning of the print head.  Here is the method to clean the contacts:

  Follow these steps to clean the contacts of the cartridge.

  1. Gather the following materials:

• A jpg still print with white lines spaced, but I replaced the color cart.

  A jpg still print with white lines spaced, but I replaced the color cart. Please notify. Thanks in advance.

  Hello

  That's what I feared. This kind of banding appears in images when using normal paper for use with low quality settings. You can try to increase the quality of the prints or try using photo paper.

  A good document to make booklets with photos is the HP brochure and flyer. (C6818A)

• My Officejet Pro L7590 prints with lines across the copies? How to fix?

  Printer has run fine until lately.  Now it has lines across all copies printed.  Computer running Windows XP.  Both are uTD on software...  Tried cleaning with air presurized Copier, but made no difference.

  I can fix thins, or must it technician?

  Hello

  This article seems to cover the problem you are experiencing. Give the steps described a try and tell us if it helps.

  Good luck!

• Why is my printer HP LaserJet Pro CM1415fnw prints 4 horizontal lines of each color of ink?

  My printer prints 4 horizontal lines of each ink color.  Sometimes it does and sometimes it doesn't.  I tried the recalibration, restart, remove all the cartridges and put in new cartridges.  Nothing works.  What is the drum?  The printer is only 6 months old.

  eswanson,

  This article should cover the problem you are experiencing. Give the steps a shot and let me know if it helps:
  http://goo.GL/KGvSV

  Good luck!

• My monitor has started to Flash a few days ago... now it's for most of the colored lines.

  My monitor has started to Flash a few days ago... now that's for most of the colored lines... I updated the NVIDIA drivers for the NVIDIA Geforce 8400GS from NVIDIA site and it improved for a while, but now he's back. I got tired of another working monitor and the same thing happened so I think that this has to do with the video card.  Help, please.

  HP Pavilion a6130n

  Windows 7 Professional

  3 GB RAM

  400 GB HD

  NVIDIA Gefroce 8400GS

  It worked!  Thanks a lot to vnyga and old_geekster.

• my printer has stopped printing. The issuance of documents in Quebec and he says the first line is printing, but it is not.

  my printer has stopped printing.  The issuance of documents in Quebec and he says the first line is printing, but it is not.

  Hello

  1. what version of Windows is installed on the computer?

  2. What is the brand and model of the printer?

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Try to run the printer Troubleshooter and check that if it helps, here is the link:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2:
  Try to run the below fixit and check if this may help:
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  It will be useful.

• I have an epson printer p950 and try to print from lightroom. I get lines across the image and Epson tell me I need to contact you to find out how to slow printing

  I have an epson printer p950 and try to print from lightroom. I get lines across the image and Epson tell me I need to contact you to find out how to slow printing

  Suggest you to reset preferences in Lightroom and then, check out: to zero (or "Screw up") the preferences of Lightroom - Lightroom Forums file

• AVI Clips imported into CS.5.5 has the color green and colored lines

  NOTE:

  I use the video monitor for the CS5.5 program.

  Always trying to between CS5.5 and test the trial version. The new challenge is the color green and colorful lines on the imported. AVI files.

  Of course, some advice would be appreciated. Thank you.

  nVidia card?  Go to the nVidia Control Panel and set the parameters of quality 3D of 'let the application decide '.  If you have an ATI card should there be similar parameters.

  -Jeff

• My printer is skip lines to print documents from my pc but the coppying works

  As the topic says my printer is skip lines when I try to print the document from my pc, but coppying documents while the printer is not connected to the pc works perfectly so I would appreciate your help to solve my problem.

  P.S. I tried Kaleidoscope twice but it does no effect whatsoever, I am using hp Deskjet 2050 J510 series

  This is not usually a symptom of software or programs.  If the ink levels are not accurate in the software of the printer it still would not affect the print quality of which is (the technology is unpredictable sometimes though).

  Try a hard reset of the printer, although it is still on and shut down the computer.  When all the powers on back, do a test print.  If printing still only all other lines, follow the document below from four Solution.  Solution Six shows you how to print a test page which will give you a more accurate account of the ink levels.  Once that prints, please tell me what it displays in the form of ink levels and if it shows any other signs of defects.

  -Solving print quality problems.

  If none of the suggestions has improved, how long is the USB cord and how old is it?