7520 all-in-One: 7520 all-in-One scanning now a straight line of the page when using the ADF

Similar Questions

• HP Officejet 4632 All in One – scanning with a vertical line through the document.

  Just bought the machine less than a month ago.  Faxes and prints fine and until last week was the sweep for our laptops beautifully... but now is scanning with a dark vertical line up and down the sheet about 1/3 in the document.  What is the cause and how can I "fix" it?

  Any suggestions?

  Thank you

  Hi Rohi63.

  I understand that you have a 4632 Officejet which becomes a vertical line what it is scanned. I'm sorry to hear that, but I'll do my best to help you.

  This seems not only to be the case when using the automatic document feeder, or the glass flat?

  Usually something like this is caused because there is something on the glass. If it only happens when you use the scanner, please get a lint cloth and some glass cleaner (Windex or water if nothing else is available) and wipe the entire surface of the glass for scanning. If this only happens when scanning via the charger, you will see there is a separate strip of glass on the left looking at the scan glass, and you can focus your cleaning there.

  If this does not resolve the issue please try the steps in cleaning several times, but if nothing seems to evolve, please make sure that the printer is connected directly to a wall outlet so that we know, that he has all the power it needs.

  Hope this helps, have a nice day!

• Why my C410a printer all in one is leaving a black line in the middle of a scanned page?

  I use Windows 7 with my C410a all-in-one printer... and this line does appear when I print the page... it does not appear on the recorded image.

  Hello richalter.

  Please check this document.

  http://support.HP.com/us-en/document/c01622189

  Bravo!

• OfficeJet Pro 8615e-all-in-one: have a line to the bottom of the page when using automatic feed for copy

  If I use the car to copy or scan a document, it comes out with a line of 1/4 "to the bottom of the page.  When I use the glass to copy or scan, it works very well.

  The line is caused by a specification on the thin glass to the left of the bed main scanner. Cleaning of this area well as indicated in the paper here , the problem will be solved.

  

• When I open 'Images' all my photos folders now appear as folders of Plains. They used to show the first picture in each folder. How can I change this back? Thank you

  Hello
  When I open "photos" to view my photos. all folders appear as clear yellow folders.

  They used to show the first photo in the folder, but they are missing... I must have changed something, but I don't know what.
  I would like to get back to the shoeing of the photo again.
  Can someone advise me?
  Thank you

  Hello

  I suggest you follow the given steps and later a update on the State of the question.

  a. open the Folder Options by clicking the Start button, clicking Control Panel, appearance and personalization, and then clicking Folder Options.
  b. now click on the view tab, and check the options-
  - uncheck the option always show icons, never thumbnails.

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• Accidentally closed all my bars and now I can not reopen them how fix this?

  There is really nothing else. I closed all my bars and all that I can see is my line of the tab and I can't redisplay all of the bars, address, etc. The only reason why I ill even get on this site, is that I had not closed the tab of the last update.

  Versions of Firefox 3.6 + have a feature to allow the user to hide the Menu bar.

  Press the Alt key to temporarily show the Menu bar, then open view > toolbars and select menu bar, so it has a check mark.
  
  The F10 can also be used on most PCs to temporarily reveal the menu bar.

  https://support.Mozilla.com/en-us/KB/menu+bar+is+missing

• 7520 all-in-one offers unique vertical black line

  My 7520 puts a single vertical black line in the middle of the page when I scan or copy from the document feeder.  I tried to reset by unplugging the power supply, and I cleaned the glass.  What should I try next?

  Hi mmvegas,

  Try to copy blank pages 3 to 5 to see if it's a stuck there small dust particle.

  It could also be something on the Jack roller: http://support.hp.com/us-en/document/c02881567

  1. Remove all documents from the ADF tray.

• 1401 all-in-One scanning

  I encountered a problem of scanning the photos.  The works of the overview, but my scanner will be the next step when I click on "accept".  I have to reload the program in case something is damaged?  Or is too old just made scanning?

  You can try to locate the hpqscnvw file in C:\Program HP imaging\Bin folder and then once you have located the file double-click e file to start the search directly on your computer. If you can't find this file or unable to make this file run then the problem is with the all-in-one software, you must uninstall and reinstall the all-in-one software on your system.

• While on a page web, using one of several browsers, it will take off and scroll down without any input from me. Seems to be intermittent but annoying. All solutions?

  While on a page web, using one of several browsers, it will take off and scroll down without any input from me. Seems to be intermittent but annoying. All solutions?

  This could be a case of interference.   Read this document about it.   Think about the suggestion of new electonic or other nearby wireless devices.   I recently read the someone pen wacom being the culprit.

  Potential sources of interference Wi - Fi and Bluetooth - Apple Support

• HP Deskjet F4280 all-in-one scan does not work. Start button / stop flashing when you press scan.

  Scan does not not on my HP Deskjet F4280 all-in-One.  The power button flashes when you press scan. Everything else works.  I tried to unplug it from the wall socket and reconnect it.  Not solve the problem. What else can I try?  Or, is it a piece of junk now and needs replacement?   My laptop (windows vista) did not go into repairs several months ago. Don't know if that had anything to do with it.

  Hi woodcarver60,

  Follow the steps outlined in the documents below to scan from the software.

  HP Multifunction printers - how Scan: Windows 8 http://support.hp.com/us-en/document/c03511921

  HP Multifunction printers - how Scan: Windows 7 http://support.hp.com/us-en/document/c03476857

  HP Multifunction printers - how Scan: Windows Vista http://support.hp.com/us-en/document/c03517146

  Scan from Windows XP software with the full functionality of HP for the all-in-one HP http://support.hp.com/us-en/document/c03517150 printers

  HP LaserJet multifunction printers - how Scan: Windows 8 http://support.hp.com/us-en/document/c03755019

  Scan from Windows 7 with full HP software functionality for all-in-one HP LaserJet http://support.hp.com/us-en/document/c03584750 printers

  HP LaserJet multifunction printers - how Scan: Windows Vista http://support.hp.com/us-en/document/c03584647

  HP LaserJet multifunction printers - how Scan: Windows XP http://support.hp.com/us-en/document/c03584350

  All-in-one printers

  Win 8: c03511921 http://support.hp.com/us-en/document/c03511921

  Win 7: c03476857 http://support.hp.com/us-en/document/c03476857

  Win Vista: c03517146 http://support.hp.com/us-en/document/c03517146

  Win XP: c03517150 http://support.hp.com/us-en/document/c03517150

  Multifunction LaserJet printers

  Win 8: c03755019 http://support.hp.com/us-en/document/c03755019

  Win 7: c03584750 http://support.hp.com/us-en/document/c03584750

  Win Vista: c03584647 http://support.hp.com/us-en/document/c03584647

  Win XP: c03584350 http://support.hp.com/us-en/document/c03584350

• 23 all-in-One Pavilion: a Factory Reset also renews the recovery Partition?

  I just did a Factory reset on my 23 all-in-One Pavilion. Previously, in the past, I had inadvertently erased the recovery disc. Fortunately, as I just discovered in the rebuilding process, I did a flash backup restore.

  (1) now that I have to order, updated to 8.1 has done that also recover this recovery on the hard disk drive.

  (2) the last time I did the flash recovery he had only windows 8. Now that I have 8.1 on that I should make a new flash with window 8.1 on this recovery?

  I know that last time I did restore flash he reported that it was a matter of time. Could not do another restore backup discs or Flash after this one. So I suspect that if the recovery disc has not been restored too it does not allow me to make a new key USB recovery stick?
  
  Thank you!  Jack {":-Dx}

  I ALWAYS KUDO AND MARKED RESOLVED. It is THE RIGHT THING to DO... doncha know. «  :-D
  Find thumbs upward, then click on to a KUDO
  Look to the right and see the OPTIONS to mark ACCEPT as a SOLUTION. Thank you!

  I think I found the answer elsewhere here. Here, it is cut and pasted the answer is in the first sentence!  Jack {":-Dx}

• L7680 All In One - scan light turns off before full page is scanned

  When I choose to scan or copy, my L7680 starts the function chosen, but after scanning about 3 inches of the page, the scan turns off light and the rest of the document will appear as solid black. Any ideas on what is the problem and how it can be repaired?

  Thank you.

  Hi there SLM64,

  Welcome to the Forums

  I noticed the problem you are having with your Officejet Pro L7680.

  I understand that you notice the scanner bulb turn off and it's causing most of your explorations or copies of out of the black. It is a hardware problem that seems as the scanner begins to fail. I have a guide below for you that means two things to try, however, if the guide does not solve the problem, I would suggest calling technical support of HP. They have an option of recovery for you to buy a new unit.

  A "Failure of the Scanner" Message appears on the all-in-one control panel and you can not scan, copy, or fax

  If you call in North America, the number is 1-800-474-6836 and for all
  other regions, click here: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html

  All the best,

• 5610 all-in-one - black thick top of line down on the pages scanned using the scan feeder tray ONLY

  Using HP Officejet 5610 all-in-one I've had for years and maybe 6 months ago, I noticed that anything that is analyzed by the load plate (if you need to scan a bunch of pages without having to analyze each page individually between analyses what is tedious that need constant attention) has this thick black line goes up and down on the middle left of THE pages scanned. Honestly, it looks really bad like if there is something hidden in this terrible line through the process of moving the paper through the feeder, BUT the original is just fine without damage.

  If I scan just a page by placing the document on the scanner glass, and then NO matter whatsoever.

  100% reproducible every time.

  So I know that it has nothing to do with the glass (which is clean), but only when the scanned document must pass through.

  Checked the forums for similar problem and found no exact match.

  I imagine that an expert out there knows the answer to that high hand. IF you could speak up, I would appreciate it.

  I THOUGHT ABOUT IT!

  I read another post:

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/HP-OfficeJet-Pro-8500A-plus-vertical-black-lines-only-when/m-p/1391261/highlight/true#M30268

  who is mentioned on opening the ADF cover. Well I opened the whole Assembly, having absolutely NO idea how it all works, and I found a 1 "x 8.5" thick mirror (for lack of a better term) who had what looked like white paint on it to the place where the pages were probably getting the black line. I scratched, retested and the question was gonzo - that's all!

  Then my wife just told me that she thinks that she knew what the problem was all along. She had put on a page and it had not dried, and she tried to put it in the charger to make a copy. She just thought that we were going to replace the printer even when and if ever, let me know. During this time it was me mad for months. What are you laughing at me? This all-in-one works very well for years - replace without good reason, must learn a new product, get new cartridges, out the same old, same old, NO way. If it is not broke, do not replace it!

  Detective Conan.

• Photosmart C8180 All-in-One printer that turns off completely in the middle of printing.

  I have a Photosmart C8180 All-in-One printer that powers completely in the middle of printing, wasting time, paper and ink. It restarts also sometimes more and more and more and sometimes it stops and all the lights blink quickly, show an on-screen error code. During these periods, the power button seems useless. I use the printer with a HP Pavilion dv7 laptop running Windows Vista and an HP / Compaq Presario Windows XP.

  When the C8180 works correctly, it's great. But I can't allow myself to be play roulette of the printer. Help, please. Thank you.

  Thanks to kkcb9395 for your help.

  Unfortunately, I have not found a solution to fix my HP C8180. The 800 number only referred me to another number (866-234-1377) where someone in India tried to sell me a phone support or a new printer. Phone support will not fix a burned capacitor and the new printers HP scan slides. Not to mention the $100. new ink I'll have to eat if I can't solve this problem.

  For anyone who has followed this thread and interested in your own C8180 setting here is a link to a parts list.
  http://www.partshere.com/hppartslist/hpparts.asp?part=L2526A
  If you find a repair manual, let me know.

  I am a customer of HP for HP CEO and longtime who think they have the customer service thing down, I'm on my way to buy an Epson.
  Thanks again for your time.

• D110 HP all-in-one: scanned document is not saved on PC and I have no way to specify where to send the document

  Operating system Windows 7 64 bit D110 all-in-one.  Serial number I uninstalled all D110 software and reinstalled, I can print.  I can't use the printer screen that says scan to PC.  Translated by Scan strive "try scan from computer or see the documentation.  Press OK' I can scan a document I have to see/hear the D110 Scan but I don't know where it is saved.  I can't say if it even happened in my computer.  When I scan, I do give me no choice about where to save the document.  Nothing in the help HP addresses this problem... that is a new problem.  I have not installed a new software or hardware.  I can see the D110 in printers and devices.  The D110 is connected to my Satellite L755 by a USB cable.

  Hi Dextery,

  No doubt seems strange that you do not have an HP Solution Center. When you have installed the software, you saw error messages during the installation?

  In the meantime, try scanning without using HP software. Here are a few methods:

  Scan using Windows Live Photo Gallery video