good way to sort and loop in a table?

Similar Questions

• Good way to stop and run again a FPGA reference

  Hi guys!

  I have some problems when I try to stop, and then rerun an FPGA vi, I explain.

  I have two DMA FIFO to send data to the FPGA of the CPU and the CPU for the FPGA. When it receives data, the FPGA treats them and sends them to the CPU, and according to the result of the CPU does something. For example, it can be turn on LEDs or to rotate a motor continuous.

  But to do these actions, I have to use a "personality FPGA", i/o pins and LEDs appear to be managed by the FPGA core. So I have to close my reference vi FPGA in charge to receive data from the CPU, make my power on LED and then after raise again my FPGA VI once again, if I don't do LED blink or stay without effect rotation motor... But close and start again the FPGA VI creates problems when running, especially for the previous reading on the FIFO DMA awaiting... I tried to intercept errors on the FIFO to restart the FPGA VI with a good time but nothing... I am lost and I think Miss me something, concept, or something else.

  I can't share my code because I work for a company, but I would like to know if you have VI with this type of structure: a FPGA reference that must be stopped to allow interaction of material with the FPGA default personality then run again, all with good timing...

  I hope I'm clear, but if it is not the case, I can rephrase if necessary.

  Thank you very much for the help!

  Afghow.

  I do not understand why you need to change the bit file is loaded in the FPGA.  Why you cannot add code that handles the inputs/outputs to your FPGA processing?  Why do you still need to send data to the host (CPU)?  Just having the process FPGA data and change the output directly.

• Is there a good way to find all references to a table or a column?

  I have recently inherited an application large apex and receive requests to make changes.  I would like to ensure that any changes that I could do on a table or a column in a table affect application pages which I think are involved.  However, demand is high, and I'm assuming that it is possible for other pages may refer to the same column or table, and I was not aware of these references (at least until after he breaks once I have change the column or table).

  My question is this: is there an integrated report, or a way to query apex, who will tell me ALL references to an application to a particular table or column?  This way I could fix all pages in the application, rather than waiting to break.

  Thank you!

  John

  John,

  Look to the upper right while in the Application Builder, for the area of the search Application .  Enter any string you want and APEX will search to find and view a report that contains a link.  Click the link and APEX will show the page and control chain concerned.

  Here's another way; query the table APEX seen through this code:

  SELECT workspace,
         workspace_display_name,
         application_id,
         application_name,
         page_id,
         page_name,
         region,
         item_name,
         display_as,
         display_sequence,
         item_label,
         db_column_name,
         db_table_name,
         help_text,
         item_id
    FROM apex_application_page_db_items
  WHERE     workspace = :workspace
         AND db_table_name = :table_name
         AND db_column_name = :column_name
  

  Jeff

  Post edited by: jwellsnh

• How to sort and distribution in cluster-table new dashboards?

  Hello

  I have three paintings of an integer (), B (timestamp) and C (double).

  Now, I want to convert them into a table of cluster. The Bay of cluster size is the number of different values in array A (here: two different values 1 and 2)

  If index 0 of the cluster array contains arrays of integers 1 and two with all values of the other two tables where the index of array A is 1.

  Index 1 of the cluster array contains arrays of integers 2 and two with all the values of the other two tables corresponding to the index of array A 2.

  How is that possible?

  Thank you and best regards

  Here is a simple solution that uses table OpenG tools.

  

• good when I have several pictures im by clicking between the spaces and the 2Installez them but theres a lot so I was wondering if there is a way to select and make snap toghter I looked online but no help

  good when I have several pictures im by clicking between the spaces and the 2Installez them but theres a lot so I was wondering if there is a way to select and make snap toghter I looked online but no help

  Yes, you can select a group of items in the project Panel, use of the PLC to the sequence option.

  Neil

• What is a good way to use the queues for the model of consumers/producers?

  Hi all

  I am following the model of consumers/producers to use the queue to synchronize the following process: the producer is a loop to produce a number N, I will put each number generated in a table and after each 5 numbers generated, I put the table in the queue and pass it on to the consumer. I have to wait the use by consumers of the data and it will then remove the item from queue so that producers will have the chance to produce another 5 numbers. As I put the maximum size of the queue one, I expect that the producer and the consumer turns to produce / consume all five numbers and the opportunity to another. Here is my code

  

  When the checkbox is false, the code will be

  

  For the first 5 numbers, product will generate every thing right and put it in the table, and it's going to pass the array to the quere so that the consumer will have the chance to loop through the table. I except the procude loop will continue only when the queue is available (i.e. all items are deleted), but it seems that once the consumer starts the loop loop of the product will continue (if the indicator x + 1 and x 2 will be changed to numbers). But this isn't what I want, I know there must be something wrong, but I can't say it is.

  dragondriver wrote:

  As you say in 1, sequency structure to enforce the order of execution, that's why I put it here, in this example, the simple question, I replace the complete code with increase in the number, in the real case, the first markers + 1 and + 2 must be performed in this order.

  Mikeporter says:
  1. get rid of all the structures of the sequence. None of them are nothing but apply a work order which would have been the same without them.

  So even if you delete the sequence structure, there will be a fixed & defined order and it is because LabVIEW follows the MODEL of FLOW OF DATA.

  Data flow model (more precisely in the context of LabVIEW): a block diagram node runs when it receives the required inputs. When a node is running, it produces output data and transmits data to the next node in the path of the data stream. The flow of data on the nodes determines the order of execution of the VIs and functions on the block diagram (click here for reference).

  Now in your code, just remove the sequence structure will not make you order will be going to stay the same, but you need to do some very minor changes (as thread of the error in loop, before that he go to the node "Élément Dequeue").

  Come to the main point: it's a good way to use the queue for the consumer/pmodel that?
  The model you are using (and qualifying as consumer/pmodel) is much too deviated from the original consumer/pmodel which model.

  dragondriver wrote:

  For the second, Yes, it's my fault for delete, though. I'm actually the example of model of producer/consumer design pattern, but I do not pay attention to the while loop in the part of the consumer.

  While loops (two producers & consumers) are the essential part of this architecture and cannot be deleted. You can start your code using standard model.

• can not access my aol email, I get a runtime error c ++ and loops twice and stops

  can not access my aol email, I get a runtime error c ++ and loop two times and stops and asks me to come back to aol or at home< this="" happens="" after="" i="" enter="" my="" password="" and="" username="" wich="" are="" correct.="" i="" have="" windows="" vista="" home="" premiums="" and="" internete="" xplorer="">

  Clearing cache didn't work, but its workin ok now the problem of his party do not know exactly how or why, but I've done a series of

  desperate, moves like get ie updates several times and also added a bar aol to my internet explore with a small icon of mail on this topic

  and I started to use this icon to get my mail, which he was the only way I could see the mail, I also downloaded AIM mail which I never used

  but suddenly the stop error and now its back to normal.

  Thank you.

• Is there a good way to archive historical data?

  Our planning cubes become too big with 5 years of forecasting and budgeting data.

  Is there a good way to archive historical data?

  How you guys do it?

  I know a simple way is easy make a copy planning essbase cubes.  However, is there text, attachments and support details, these will be lost unless there is a way to archive a RDBMS repository data for planning.  Even in this case - all links and hooks of the Essbase cubes in these RDBMS repository will be broken.

  The old fashion method is to print all reports in PDF and archiving.

  Given that the plan changes every month, reprocess you history until you check in?

  Thanks for your advice.

  This can be done in 2 ways...

  1. just make a copy of the old 'DATA' in text file or another essbase cube history. Clear only the historical data for the current application. This will keep other information as text in the intact cell. In case the user wants to refer to the old texts/support cell details they can do by going directly into the application and for part of data, they can look in old PDF report.

  2. a copy of the planning application to create a copy of the current request. Keep all old data, text etc in old app of cells. All previous reports also point this app. Then erase current app and can be simply provide read access to older data App users can be trained to use older applications for all historical data and current app for existing budgets. Also this app can be used during the period of archiving all data.

• I received the email indicating that payment is confirmed and would receive details of where and how to download in 24Hrs but it was January 29 and still nothing of what is happening? I still have no way to download and install and need to

  I received the email indicating that payment is confirmed and would receive details of where and how to download in 24Hrs but it was January 29 and still nothing of what is happening? I still have no way to download and install and you need to get this sort no matter what Advisor

  Your subscription to cloud shows correctly on your account page?

  If you have more than one email, you will be sure that you use the right Adobe ID?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  .

  If Yes

  Some general information for a subscription of cloud

  Cloud programs don't use serial... numbers you, connect you to your cloud account paying to download & install & activate... you may need to sign out of the cloud and restart your computer and log into the cloud for things to work

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  .

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• vSphere 5.5 using the uplink of LBT group that does not have a good way

  We use LBT since our recent deployment, which is new for us.  Everything seemed fine and dandy, until recently the VMs began dropping their connectivity to what looked like at random times.  The first fix out the door had to disconnect and reconnect the vNIC for each virtual computer.  Sometimes, it took a few tries before it worked.  We discovered that LBT moved VMS to the other group of uplink, which was a physical affair.  Unfortunately, someone didn't configure the port correctly on the remote switch, so while link came, he could not access the VLAN correct.  My question is, why the LBT would move virtual machines to an uplink group which did not have a good way?  He seeks only a physical link?  Looks like this problem waiting to happen.  Or, more likely, we have something misconfigured.  Any help would be wonderful, I don't like the idea to return to etherchannel or LACP with IP hash with blades chassis.  Thank you!

  My question is, why the LBT would move virtual machines to an uplink group which did not have a good way?

  Is that a "good path" can mean many different things in different circumstances of different points of view, if it's out of reach for LBT. It will be only on the physics of the status of the link. There is beacon probing too which can detect switch upstream outages but it can be used only with at least 3 vmnic uplinks and it has a few disadvantages, see:

  http://virtechgeek.com/2013/05/06/beacon-probing-vSphere-network-policy/

  http://thomaslowblog.blogspot.de/2011/10/vswitch-network-failover-detection.html

  You can use the dvSwitch health check feature to make sure that all the natachasery of all the hosts connected to a dvSwitch can access the same VLAN. It will not prevent LBT to move virtual machines, but it will at least raise an alarm if a bear cannot access a VIRTUAL LAN. Take a look at this article:

  http://wahlnetwork.com/2012/08/27/new-5-1-distributed-switch-features-part-1-network-health-check/

• How to Auto search PDF for some criteria, and then sort and combine PDFs of this criterion.

  I receive 100 faxes a day.  Each fax has a particular bank account # (I have about 40 different bank accounts it could be associated to). I want Adobe Acrobat Pro to search all these faxes to identify the associated bank account #'s.  So I would like to sort these faxes by the identified bank account #.  So I want to combine PDF files into 1 single file PDF for each bank account # (already know how to do this last step). If anyone has any ideas on how to complete the first two functions, it would be greatly appreciated.

  Thank you!

  Hey Ethan,

  I'm sorry, but it is certainly not possible directly via Acrobat.

  Java script code must be created in order to perform the first two tasks.

  Or otherwise you can manually search, sort and combine the PDF "." But it would be a hectic task.

  If you are good with the scripts you could try once and see if you can.

  Concerning

  Sukrit diallo

• Is there a good way to do it?

  Is there a good way to write messages of errors in PL/SQL? For example:

  IF < variable > IS NULL THEN

  dbms_output.put_line ("' error message");

  END IF;

  OR

  IF < variable > IS NULL THEN

  RAISE < exception >;

  END IF;

  What is the most correct? Or maybe the two are quite right?

  Thank you.

  Hello

  Dbms_output is a good way of packing to write messages for debugging PL/SQL code.  It is not very good for anything else.  It is particularly inappropriate for the error messages, since the output can easily be missed, if it is never displayed at all.

  The second way you posted (STIMULUS) is good.  Create user-defined exceptions and RAISE them explicitly.

• disable column sorting and resizing on table view

  
  Is there a way to disable sorting and resizing of columns in the view table?

  Thank you

  Use

  setSortable (false)

  setResizable (false)

  on each TableColumn

• Is there a good way to automate changing existing links to external PDF to be attachments in PDF with the same names?

  Greetings!

  Can someone tell me a good way to automate changing hyperlinks existing PDF 'main' to an external PDF rather do links to attachments PDF for the main PDF (the PDF attached to have the same filenames as the external PDF files)?

  The current link to main PDF format:
  Navigate to a page in another document
  File: C:\\path\filename.pdf
  Name of the destination: P:1

  When the link is manually changed to link to a PDF file that was attached to the main PDF:

  Navigate to a page in another document
  : PDF attachment
  Page: 1
  Zoom level: page Fit

  The new PDF link does not list the name of the attachment PDF file in the link.

  The file main PDF (the one that has the connection I would change automatically) is generated with hyperlinks to other documents PDF from Adobe FrameMaker 11.  In FrameMaker11, we have added text marker special "openpage filename.pdf:1' which is 'automatically' has been changed to hyperlinks to PDF files external when the main PDF file is created (postscript file is processed) Adobe Acrobat Pro 11.

  My first choice is to be able to change the format of the text in the file source Adobe FrameMaker special marker, but I found no way to specify a link for a PDF attachment with a certain file name.

  However, I also very much the ability to run a command on a main PDF file to change the links there.

  Has anyone tried using only Adobe ExtendScript ToolKit CS6? In other words, a script that could automatically change the hyperlinks in a PDF document to a link to attachments in PDF instead of external PDF files, or to modify the links not transformed, while they are still in Postscript file format format, or change the text in FrameMaker marker instead of creating a link to a PDF file in the same directory as the main processing PDF to create a link to a PDF attachment files?

  Thank you
  Judith Wallace
  [email protected]

  FrameMaker hyperlink feature has no ability to "connect" with an attachment on/in a PDF target.

  PDFs from FM may have named destinations listed FM files created as a link of file01.fm to the named destination specified in file01.fm will be functional in the PDF files created from the files of FM.

  Then, of course, it is the possible dynamics by use o FM books. But it is the grist mills in the FM 2 user forum.

  RE: Script - PDF scripting is via Acrobat JavaScript. It is something yet and by Adobe, even though it may migrate to a Standard ISO (or be wound in a future standard ISO 32000).

  Then, to the point - look at Acrobat JavaScript for the script.

  Be well...

• I cannot add a video to Muse. Does anyone know a good way to get where I want to go?

  I have integrated a YouTube video on a site before Muse. I used the embed code and the URL successfully in the past. Now, the widget displays a notice, "unable to generate the thumbnails.

  In addition, YouTube launched a policy where they run ads unless I monetize firstly for the privilege to disable ads. I love YouTube because they offer a choice of sizes for the player, but have no interest in signing up for Google Adsense. I don't see any option of size on Vimeo. In addition, a Vimeo version load into the widget with the URL or embed code to be.

  All I want is a simple player for a video slideshow portfolio HD. I need the player to fill more of the page than the player of 560 x 315. Does anyone know a good way to get where I want to go?

  Hello

  If you ready to welcome video on the host server you can do this by importing mp4 files in the current folder and then you can use the HTML code to play this video in HTML5 player and you can set the size in code.

  Please take a look at the steps of the example.

  1. go to file > add files to download > (select the file you want and it will be moved in the current folder)

  2. go to object > insert HTML and the following code Type code

  ' assets / "Filename".mp4" type =" video/mp4">".

  "Filename" should be replaced with the exact name of the video file that you imported in step 1

  3. you can change the width and height according to your requirement.

  This will create the image of the video in HTML5 player, and you can place it in the Page as a pet your condition.

  Concerning

  Vivek