GPIB do not list in LabVIEW but ranked in MAX

Similar Questions

• Attributes in NOR-Max not found in Labview

  I'm currently developing a LabView tool (2011) with a camera from Manta G504B Ethernet. It is NOR-compatible IMAQdx but in NOR-MAX attributes are not the same as those found in LabView. I would like as my tool developed to be able to change the exposure and acquire values and lifestyles. However, these attributes do not appear in LabView but appear in NOR-MAX. is it possible to get these attributes in LabView, since these values will change very frequently?

  My Manta firmware is 00.01.44.00

  NOR-IMAQ is 4.6.1

  E/s-OR-IMAQ is 2.5

  NOR-IMAQdx 3.8.1

  NOR-MAX 5.0.0f1

  Answer was found with the example OR grab and Attributes.vi base.

• GPIB write does not work, but ibwrt in MAX not

  Hi all

  I am trying to send commands to a very old Klinger CC1.1 motion controller by the GPIB in labview 8.6.  I tried to use a GPIB-USB-HS and a GPIB-USB-B.  The Klinger takes ASCII commands simple adjustment of the speed, the number of steps, etc.  When I try to send these commands by using the GPIB write under VI in labview, the Klinger appears to be not getting properly (I put it move 100 steps, send the go command, and it will go all the way at the end).  When I send commands using MAX, they work very well.  I used spy OR moniter orders I sent and it seems that the only difference is that MAX uses the ibwrt command, while Labview uses GPIB write.

  Is it possible to use the ibwrt command in labview?  If this isn't the case, why don't the controls receive correctly when transmitted via GPIB write?  I tried to use the initialize VI GPIB, but it doesn't seem to make a difference.

  jhinton wrote:

  Is it possible to use the ibwrt command in labview?  If this isn't the case, why don't the controls receive correctly when transmitted via GPIB write?  I tried to use the initialize VI GPIB, but it doesn't seem to make a difference.

  Depends on what you mean by "a path". Technically, you can call the ibwrt command by calling the DLL in which it resides. But I guess it's probably not what you mean.

  New code should use VISA rather than the GPIB function. The problem may be with the mode used. You can download a NI Spy capture? It is better to download a capture you make using MAX, which indicates a reliable operation and a capture using LabVIEW doing the same thing.

• My iphone was stolen. I try to activate the 'find' on icloud app but my camera (4 seconds) is not listed. This means that I won't be able to use it?

  My iPhone was stolen. I try to activate the 'find' on iCloud app but my camera is not listed in the topic "all devices". If I select the "settings" app in iCloud, I see my device listed but. How can I get my unit added to the app locate so that I can active lost mode? Thank you.

  You can only locate, lock or wipe your device when it is connected to iCloud and "Find my phone" is enabled, in addition the unit must be turned on and connected to a cellular network or wifi.

  Unfortunately, you can not activate iCloud or "Find my phone" remotely.

• Mozilla does not, so I uninstalled and downloaded again, now he says I downloaded, but no icons anywhere and no not listed in my downloaded programs lists.

  I used Mozilla on my laptop for years. All of a sudden it does not open. So in desperation I uninstalled and tried to reinstall it. I went through the step ('run' and then 'Yes'), but no icon and no mozilla in my list of "programs", but it says on the web page of download I installed mozilla. Help, please. I like mozilla. Sarah

  Remove the firefox installation folder located in both.

  • C:\Program Files\Mozilla Firefox

  OR

  • C:\Program Files (x 86) \Mozilla Firefox

  Then run the installation again, this time, the complete installation program.

  • https://www.Mozilla.org/en-us/Firefox/all/

• I need to uninstall 4.0 beta 12... but he does not appear in my Uninstall list... but I see it in my programs folder...

  I need to uninstall 4.0 beta 12... but he does not appear in my Uninstall list... but I see it in my programs folder...

  Remove the Program Files folder.

• I have House part for my iPhone and apple TV, but the iPhone libraries are not listed under computers on Apple TV.  I don't see libraries for my Mac.  I use the same ID across the three devices apple

  I have House part for my iPhone and apple TV, but the iPhone libraries are not listed under computers on Apple TV.  I don't see libraries for my Mac.  I use the same identifier apple through the three devices. I have an iPhone 6 more working 9.0. The devices are all on the same home network running.

  You can't share a library that is located on an iPhone, iPod or iPad with other devices. You can only share a library that is located on a Mac or a PC with other devices. On other devices, iPhone, iPod and iPad for example, you then activate home sharing to connect to the shared library.

• IMAQ installed, but not found in LabView

  Ladies and gentlemen,

  We have a 2012 faculty (student) University of LabView license and want to use a digital camera with Labview. LabView has been permitted, also installing IMAQ 4.6.4 produced any errors. It is recognized by the NI Measurement and Automation Explorer as you can see in the attached PDF file.

  However, IMAQ features are not visible in the window function LabView and our VI test cannot find functions IMAQ (pages 5 and 6 of the attached PDF file.

  We reinstalled twice, LabView makes sure the antivirus has been disabled. We have also tried to install another version of IMAQ (4.6.1), but with such problems as described above.

  Today, I realized that we have a version of 64-bit Windows and LabView has 32 bits?

  Thank you very much for your help.

  Here's the most likely explanation of our problem: IMAQ 4.6.1 and IMAQ 4.6.4 are not compatible with LabView 2012:

  http://digital.NI.com/public.nsf/allkb/DB928F6D5E9D6B97862579A7006B2850

• I want to uninstall real player. I went to the control panel to uninstall, but it was not listed.

  Original title: real player not on the list of programs but still doesn't work

  I want to uninstall real player. I went to the control panel to uninstall, but it was listed.  I can always download with real player. What's new? Why is not listed if I can get rid of him.

  Hello

  What operating system are you using on your computer?

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  a. click Startand then click run.

  (b) in the Open box, type regedt32, and then click OK.

  c. in the registry editor, find the following registry key:

  HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall

  d. in the left pane, click the Uninstall registry key, and then click export on the file menu.

  e. in the export registry file dialog box that appears, click desktop in the list record in , type Uninstall in the file name box, and then click Save.

  f. each key listed under Uninstall in the left pane of Registry Editor represents a program that is displayed in the list of currently installed programs in the add tool / remove programs. To determine which program that represents each key, click the key and discovers the following values in the details on the right pane:

  Full name: the Display Name key value data the name listed in Add / Remove programs.

  - and -

  UninstallString: The value of the UninstallString key data the program used to uninstall the program.

  g. After you identify the registry key that represents the program that you removed but which is still displayed in the currently installed programs list of add or remove programs, right-click the key in the left of the registry editor window pane and then click Remove.

  Click Yes in response to the message "are you sure you want to delete this key and all of its subkeys?

  h. on the file menu, click Exit to quit the registry editor.

  i. click Start, click Control Paneland then click on Add / Remove Programs.

  In the currently installed programs list, verify that the program whose registry key you deleted is no longer listed.

  j. do one of the following:

  o If the program list is not correct in Add / Remove Programs, double-click the file Uninstall.reg that you saved on your desktop in step 5 to restore the original list of programs in the registry.

  -or-

  o If the program list is correct in Add / Remove Programs, right-click the Uninstall.reg file on your desktop and then click Remove.

  For more information, you can check the link below:

  http://support.Microsoft.com/kb/314481

• Unknown contact appeared on t. o. list of contacts, but not on my list of regular contacts - I can't delete

  Unknown contact appeared on t. o. list of contacts, but not on my list of regular contacts - I can't delete

  original title: unknown contact on list o. t.
  Thanks for visiting the site of the community of Microsoft Windows. The question you posted would be better suited to the Windows Live community. Please visit the link below to find a community that will provide the support you want.
  http://windowslivehelp.com/forums.aspx?ProductID=1

• I get a message saying "you have exceeded your profile storage space. Yet all the files listed th are actually my docs and application data. How to delete my profile, but not from my pc? increase the max profile size

  I get a message saying "you have exceeded your profile storage space. Yet all the files listed th are actually my docs and application data. How to delete my profile, but not from my pc? increase the max profile size

  1. the first thing to do is to make sure that the computer is completely virus/malware-free. Googling around this error produced quite a few links where the posters were or had been infected with Spyware Protect 2009 rogue.

  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  Once the scanning is complete (do not skip the preparatory stages no more), if the problem persists:

  2. double-click on my computer, right-click the icon for your hard drive, click left to get its properties. If you see options to set Quota management make sure that they are disabled.

  3. in the case - BUT ONLY AFTER YOU ARE sure THAT THE MACHINE IS MALWARE/VIRUS-FREE - copy the lines between asterisks (not including the asterisks) below and paste it into Notepad. Save as undopolicy.reg somewhere, you will find. And then double-click the .reg file, that you have just made to melt in your registry. I hope that this will take care of the issue.

  *****
  Windows Registry Editor Version 5.00

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System]
  'EnableProfileQuota ' = -.
  'ProfileQuotaMessage ' = -.
  "MaxProfileSize" = -.
  'IncludeRegInProQuota ' = -.
  'WarnUser ' = -.
  'WarnUserTimeout ' = -.
  *****

  MS - MVP - Elephant Boy computers - don't panic!

• Microsoft Word disappeard from desktop icon... The program is not listed under programs... I can open a document in Word, but where the 'program' gone? Where can I find?

  I do not know what to try because I do not see even as Microsoft Word listed under programs. Other applications in Office are listed under programs, but I don't have them on my desktop.

  Hi if it is Office 2007, then try this...

  Open the location of C:\Program files\Microsoft Office\Office12\

  Find WORD.exe-> right click on it and choose "send to"-> "create a shortcut (desktop).

  For the Word application, you will get a new shortcut on your desktop. Rename the shortcut and drag it on your Start menu...

  or right click on Start menu and select Explorer... Open programs-> Microsoft Office, and then paste the shortcut. This will help you get the shortcut again.

• Run Autoruns and found rdpclip listed at startup but FILE NOT FOUND

  Original title:

  PC was unstable.  Run Autoruns and found rdpclip listed at startup but FILE NOT FOUND

  Jill

  Click Start

  In the start search box, type msconfig

  Click on continue if prompted for permission

  Go to the Startup tab

  Research of any startup item that refers to rdpclip

  If found, clear the check box to the left of this startup item, and click on apply

  Return to the general tab

  Select Normal startup

  Click on apply and OK

  Restart your PC

• Vista SP1 seems to load but is not listed on installed updates or recognized by other programs

  I get a problem with Vista.  I had to restore to factory settings and loaded the more updated with the exception of SP1.  When I try to load it, I quickly get a message that the installation was successful, but SP1 is not listed on my installed updates and any application that needs it asks me to load it.  I tried MS Fix It nothing works.  I have therefore to be installed, but it is not recognized as installed, or there is not installation despite the message from Windows Update to a successful installation.  Any ideas on how to fix?

  Thank you very much!

  I get a problem with Vista.  I had to restore to factory settings and loaded the more updated with the exception of SP1.  When I try to load it, I quickly get a message that the installation was successful, but SP1 is not listed on my installed updates and any application that needs it asks me to load it.  I tried MS Fix It nothing works.  I have therefore to be installed, but it is not recognized as installed, or there is not installation despite the message from Windows Update to a successful installation.  Any ideas on how to fix?

  Thank you very much!

  First - make sure you have the latest drivers for hardware device downloaded and installed on your computer manufacturer's website.

  Then...

  Download and SAVE the SP1 for your computer somewhere, you can find it after a reboot.

  • Windows Vista Service Pack 1 five language standalone for x 86 (Kb936330)
  • Windows Vista Service Pack 1 five language standalone for x 64 (Kb936330)

  Also download and SAVE the SP2 suitable for your computer somewhere, you can find it after a reboot.

  • Windows Server 2008 Service Pack 2 and Windows Vista Service Pack 2 - stand-alone version ALL languages for x 86 based systems (KB948465)
  • Windows Server 2008 Service Pack 2 and Windows Vista Service Pack 2 - stand-alone version ALL languages for x 64 systems (KB948465)

  Reset.

  Right-click on the SP1 download and choose Run as administrator (if logged in as an administrator.)  Follow the instructions until it concludes and restart.  Open a session.  Wait a few minutes.  Reboot again.

  Right-click on the SP2 download and choose Run as administrator (if logged in as an administrator.) Follow the instructions until it concludes and restart. Open a session. Wait a few minutes. Reboot again.

  Then use this:
  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  find out if you have installed SP2.

• Canon FS10 Camcorder will appear in the list of devices, but Windows does not communicate with the device

  Original title: CANON FS10 problem

  Windows is unable to connect with my canon FS10 camcorder. It does not appear on my list of currencies but cannot communicate. HHHHEEEELLLLPPPP

  Hello

  To help you better, please answer these questions.

  1. what happens when you connect the camera to the computer?

  2. you try to transfer data from the camcorder?

  3. do you have signs on the camcorder drivers in Device Manager?

  I suggest you follow the provided methods to solve the problem.

  Method 1: Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2: Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-in/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 3: What to do when a device is not installed correctly

  http://Windows.Microsoft.com/en-in/Windows7/what-to-do-when-a-device-isn ' t-installed-correctly

  Method 4: Update a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-in/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If you need help with the Windows operating system, just tell me and we will be happy to help you.