Apple makes a Wifi Range Extender

Similar Questions

• AC1900-Nighthawk WiFi Range Extender can be wired in and used as an access point?

  I want to replace my WN802T which is connected to the network.

  Found the manual and it can be used as an access point.

• Netgear RangeMax Wifi Range Extender 802.11 wireless router g

  ALrighty, I had used this router just fine with my WHS v1 and now I'm upgrading and aging...

  Hi BryantThompson,

  Since you are facing problems with Windows Home Server, it would be better suited in the WHS forum. Please post your question in the next WHS forum to improve assistance:

  http://social.Microsoft.com/forums/en-us/whshardware/threads

  Please provide as much detail as possible about the question when you ask the question in the WHS forums.

• Airport Express does not extend WiFi range

  OK, I posted a long time will cost about an airport older Gen Express not extending my wifi range when implemented to extend (wireless) and connected to a network of Apple (Airport Extreme). No solution, so I gave up.

  Still frustrated by the lack of a strong wifi signal to my back door / Garden (it is a small house!), I bought a new Express and set it up again to extend my current network, placed it on my window sill back room (where I get a pretty good wifi signal on my iPhone and iPad), but about 6 feet of him, the other side of the glass in my garden I get a flicker of 1-2 bars the signal strength that is de-energized intermittently.

  I get no significant (or even vaguely reasonable) increase in force wifi when I approach from the Express, but increase next to the extreme.

  Or should I put either the express until properly (I'm sure I'm) or I am fundamentally misunderstand the term "extend a wireless network. Alternatively, I bought 3 years 2 defective Express apart.

  Can anyone help?

  See you soon.

  You have a handy Mac laptop? If so, we can run tests to understand the current quality of the signal at each location where you want to have a Wi - Fi access. If all goes well, we can find better place to place your Express extension for your goals of networking.

• Problem setting up WNR614 as Wifi Repeater / Range Extender

  Hello

  I have a Modem ADSL2 + Wifi (Beetel 450tc1) that I use to connect to my computer. Recently I bought a new Netgear
  WNR614 Wifi router and you want to use as a range extender. I have connected the netgear wireless cable modem Repeater and
  another cable router netgear for computer. He opened routerlogin.net initially.

  In literature, he mentioned that I should use the same SSID, channel, encryption method, and password of the netgear
  router. As soon as I put the Repeater on the same channel, my computer shuts down opening routerlogin.net and it gives page not
  found the error.

  Also the router to start up it gives message that ' to avoid a conflict with your ISP, your router IP.
  address has been updated to 10.0.0.1'. My modem IP address is 192.168.1.1. So, when I try to change the IP address of the netgear router
  address to 192.168.1.2, it gives me error "the conflict of ip address with the WAN IP subnet. Please enter a different ip address
  address. Invalid starting IP address DHCP".

  When I remove the use of router as a DHCP server, it gives me error - "the conflict of ip address with the WAN IP subnet. Please
  Enter a different ip address.

  When I try to activate "Enable wireless repeating", it gives me erorr - "repeat wireless function cannot be.
  used with Auto Channel". But when I change the channel of the car on the same channel from my modem (channel 1), my computer
  stop opening routerlogin.net and I can't access the netgear router configuration settings anymore. The only option I have left with
  is to reset the router.

  Please help me.

  Thank you

  OK, unplug the WNR614 of all, do a factory reset, then connect a PC to the LAN port and proceed to reconfigure.

• I am trying to add a N300 wireless range extender to my house.

  I am trying to add a range-extender N300 WiFi at my home.  I have a router from apple.  I am trying to connect with WPS. I am looking for a WPS button on the router from apple (according to instructions), but fails.  Is it possible to use this extension?

  The N300 has a web interface, you should be able to see the network transmitted the Apple it. Note that it may not work. Another unit of Apple would be simpler and better.

• Unable to receive calls from Apple Watch, using WIFI AT & T calls, when the iPhone is turned on, turned off or in Airplane Mode.

  I work on this issue and wanted to involve the community.

  I have tests the functionality Apple Watch and have been unable to solve my problems with WIFI call. I use the AT & T and I am connect to the strip of the 5 GHz on my router Xfinity.

  I am able to make/receive calls from my iPad and Mac laptop when iPhone is off / Mode plane; However, this feature does not work on the watch. I can make and receive calls from the watch when the phone is turned on.

  Another problem is that I am not able to send and receive messages (blue or green bubble) of the watch - once again when the phone is turned off or in flight Mode

  I'll copy in 2 portions of the Web site: http://help.apple.com/watch/

  http://help.Apple.com/watch/#/apd0443fb403

  If your Apple Watch is in range of a Wi - Fi network that the iPhone is connected to before, you can always do the following (even if the iPhone is off):

  • Send and receive digital messages Touch
  • Send and receive messages using Messages
  • Make and receive phone calls (if you have active calls, Wi - Fi, and you are within range of a Wi - Fi connected to your iPhone before)
  • Check current weather conditions
  • Track your inventory

  http://help.Apple.com/watch/#/apd2fe746e86

  Make calls via Wi - Fi

  If your cellular operator offers Wi - Fi calls, you can use Apple Watch to make and receive calls over Wi - Fi instead of cellular network - even when your pair iPhone isn't with you or is disabled. Apple Watch comes to be in range of a Wi - Fi network that is connected to your iPhone in the past.

  To see if your carrier offers Wi - Fi calls, see the article Apple Support phone with Wi-Fi calls, then enable the calls on your iPhone and Apple Watch Wi - Fi.

  Note: You can make emergency calls via Wi - Fi, but when possible, use rather iPhone over a cellular connection - your location information will be more specific.

  Enable on iPhone Wi - Fi calls. On iPhone, go to settings > phone and turn on Wi - Fi calling and application to other devices.

  Enable calls on Apple Watch Wi - Fi. Open the Apple Watch app on iPhone, tap My Watch, tap phone, then turn on Wi - Fi calls. If you do not see the parameter, make sure that you have activated calls on iPhone Wi - Fi.

  Answer please if you are able to perform any of these functions! And any troubleshooting you can think!

  AspiringAppleGuru wrote:

  I have... to connect to the 5 GHz on my... router bandwidth.

  Hello

  These features are not available because Apple Watch cannot connect to a network of GHz Wi - Fi 5.

  If your watch is not connected to your iPhone via Bluetooth, but lying in a 2.4 GHz Wi - Fi network your iPhone plugged in before, the watch can connect to this network and you can continue to use certain features, including Wi - Fi calls (when it is supported by your operator, you already have in place).

  More information:

  On Bluetooth and Wi - Fi on Apple Watch - Apple Support

  Use Apple Watch without her sister iPhone - Apple Support

• no more WiFi which extends from the airport express and Time capsule

  I have no more WiFi which extends from the express airport and Time capsule.

  and once it worked...

  airportconfiguration-app also works, but the graphic display allows to have a straight white line. now, it's one interrupted...

  Your unbroken lines in airport show connections ethernet utility... broken lines show the wireless connections.

  So it depends on the extend method you used.

  I think at this moment, things are configured wrongly... for some strange reason things happens and elements on a stand-alone basis, return to a default mode.

  The best way to manage it is full factory reset on everything... and repeat the installation.

  I have no more WiFi which extends from the express airport and Time capsule.

  It seems to me that you extend a NON-APPLE router... in this case, your Apple routers must connect by ethernet and create a wireless network. Routers Apple cannot extend the NON-APPLE router wired.

  The express could extend the TC or visa versa... by wireless...

  Then I suggest say us what is the main router in the network?

  You have connected by ethernet to the TC or Express or both?

  If so please reset completely the two elements and try again. Make sure they are in bridge mode... It's the network tab. Router Mode is turned off.

  

  And your wireless tab is configured to create a wireless network...

  Use the same name (SSID) and even the security setting and the password as the main router to network roaming (extend wireless ethernet).

  If the Express and transport CANADA are the same, both will have this configuration... If the express extends to wireless then it should NOT be connected to all the way to ethernet... (sequel to wan side at least) and it will be set to expand wireless on the wireless tab.

• Installed New Netgear Wireless Range extender but new network doesn't have internet access.

  I just installed a machine net universal range extender for WiFi and the signal over the Wan is very strong, but when I connect to him he says that have no internet access. What should I change? I post what I'm on the Ext network.but when I try to access other sites, it won't let me.

  I had the same problem as you and searched everywhere for a positive response and have not had a. I was about to return the netgear Extender when I, fortunately, has found a way around this strange problem.
  In fact, it's really simple, and I encourage really all those who eventually get this problem complain to netgear not having their detailed in the guide installation process that they shipped with the product.

  In my case, I have a WEP encrypted network.

  If you can't access the web interface of the Extender, you need to reset the device by inserting a paper clip in the small hole next to the WPS button (if you don't know already).

  When you are prompted for the encryption key and password for the network existing (the original one), you MUST WRITE THE PAST ON THE INPUT FIELD KEY word select and not the field the password. You can choose one of the 4 input key fields, but you MUST write the password on one of them and leave the field blank password (I think it's just for the WEP encryption, which is my case).

  I also changed the encryption type for the new network "_EXT" from WEP to WPA/TKIP but kept the same password.

  After the connection is complete the Extender successfully verified updates and all the IP addresses are assigned automatically via DHCP.

  I hope that I answered in the time before returning the Extender because I don't have a kind of complained after doing this.

  Good luck
  Marlon.

• How can I separate apple ID my wife of mine?

  My wife and I have several apple products now and it becomes cumbersome to use the same ID for each apple. How set up a separate apple for my wife ID and pass its products to its new ID?

  Unfortunately, it is not possible to transfer the contents of one Apple ID to another.

• time capsule airport lose wifi range

  I've been using airport time capsule as a router and machine time about 1.5 years and suddenly the WIFI range

  come fall, I use the modem cable HI Speed with 10 loading MB and 150 MB down when suddenly the speed dropped I still get 10 but only about 92 or less down, unless I use an ethernet cable that brings speed to 150 are lowest, (PS), I ran the on time capsule ethernet cable to my Mac mini so it becomes what should be diffuse but do not do a very good job more.

  question is there something that can be done to solve this problem everyone knows this problem, thanks for any help that can be provided.

  What exact model of the Time Capsule (TC) do you have? Given that the question appears with the wireless, you live in an area with a high concentration of other networks Wi - Fi? An apartment complex or a dorm maybe?

• I lose my apps apple makes such as numbers, pages, imovie, garageband etc after restoring backup from my iphone recently brought 6 s

  I lose my apps apple makes such as numbers, pages, imovie, garageband etc after restoring backup from my iphone recently brought 6 s why? I just brought a new phone and restore from backup, but after the restoration of my new devices I don't see it.and I pick up on the app store and its application to pay... its happened... there please help me anyone... Thanks in advance

  new phone iphone 6s 128 GB

  iOS 9.2.3

  Are you logged in using the same as before Apple ID? Under the "iTunes and App Store", you can check in the settings menu.

• WRT54GL router and WRE54G Range Extender

  Hi all

  Can anyone shed some light on the link between a range extender wireless (WRE54G) with a router (WRT54GL): -.

  1.) is it compatible with each other?

  (2.) what distance will be extended the range? Currently the router itself has a range of about 10 to 15 meters

  If you would use the WRE54G, otherwise, how could I extend the range?

  Thank you

  Heinz

  Cool... Thanks Klatch!

• Computer "is" more low-signal router instead of range extender

  I've seen a few similar posts; but nothing seems exactly like my problem; or I missed it.

  I have a router WRT54G and WRE54G range extender; seem to be working well and talk to each other.  (Took a while, but I got it; and it has been fine since.)   I connected to the signal stronger WRE fast when Internet and slow Internet when WRT connected to the lower signal (which is further) - just like one would expect.

  The problem: my computer (only place Office) will be unrelated to the stronger signal "Range Extender".  I'll work some time or leave and come back - and the link will be back signal Extender, fast router signal slow, lower.  I can click on my profile; Connect and sometimes come back on the most powerful signal.  (If not, try again and again until it crashes into the most powerful signal.)  [Even with "site survey" - I select Connect to the stronger signal, but it seems to connect randomly either.]

  - & - Another post, I think I could do something with the MAC addresses - for example, block my USB MAC of the router wireless receiver, so he 'only' to connect to the Extender.  (Better yet, I can say my network connection to connect only to the MAC of the extender?)

  Operating system is - 2000

  Here's something I put in place earlier - for the most part just repeats above:

  Equipment:

  LinkSys wireless router; WRT54G; 6 worm.  Firmware 1.00.7 (now 1.02.7)

  LinkSys Range Extenders;  WRE54G; Firmware Ver 3 3.01.01 (now 3.04.01.)

  USB LinkSys network adapter: WUSB54G Ver 4

  -WHY it keep coming back to the lowest signal from router?  (The big question).

  -Why, when I do a site survey, select the strongest signal and select Connect, enter the WEP code, he still occasionally connect back right at the lowest signal from router, even if I've highlighted the stronger signal Repeater when I hit the Connect button?

  -If I create profiles with the most powerful signal, it is always the same (that is, sometimes it connects the signal the most powerful signal "Extender" and sometimes the Repeater weaker signal, except that I do not need to enter the WEP code if I connect to the profile instead of the signal of view survey.)

  -According to information online, I found that the router must be on 'Firmware version 2.02.2' to be compatible WRE;   But - if I check for the latest version of the firmware for WRT54G version 6, it is 1.02.7 - does that mean the Extender is incompatible with my router?

  -Are there a way to "force" the wireless network connection to bind to a specific MAC address - so I can restrict to a stronger signal of the Extender?

  Scrooge, thanks for the suggestions.    Earlier, I tried the following solution, based on a similar condition a few - this on another post:

  Solution: Configure the router MAC filtering does not to allow connections to the MAC address of the wireless USB network card.

  Since I tried this a few days ago I was followed and it worked.  So, before he would keep switching to the smaller Repeater link.  In saying the Repeater from the heat to let the link not only the Extender to post a link and it is now to stay connected to the Extender and the speed remains constant.

• Printer wireless B109n-z Edimax Range extender access point

  I can't get my printer to connect to the range extender.  It's an EW-7416APn V2.  All my other iPods to computers etc. all find and connect fine it's just the printer.

  The printer connects to my router (netgear Sky) so I know the side of the printer wireless works.  IV ' e been through the implementation of many times and failed to get the connection.

  Network test report suggests the SSID is not found, but everything it is no problem.

  Any ideas?

  I also tried the button but WPA setup routine that will not work either!

  Sort the problem.  There was nothing wrong with the Edimax Repeater or the printer.  I had placed the printer on the shelf under the TV in the winter garden.  Above the plateau is an area of sky with a transmitter of Gig AV 2.4 connected to it (to send Sky TV for the kitchen).  Turn off the transmitter AV enabled a connection with the Repeater.  FYI, the distance between the transmitter AV and the printer was around 250 mm.  I have now moved the transmitter AV of the printer (connecting via a cable SCART, rather than directly to the area of the sky).

  Operational wireless printer!