gradient

Similar Questions

• "GRADIENT ARRAY" message on my Qosmio G20

  Hello world

  I have a qosmio g20 and for some reason when I start the following message is displayed:
  DEGRADES in TABLE-1.

  I have all tried allmost, uninstall the raid utility, formatting the discs, but I still get the same message.
  Also, I get the same message when I try two mirror disks. When you get to 90% of the mirroring of an alert is displayed again indicating "table 1 gradient, a drive is missing.

  Hope someone can help me.

  Thank you very much
  Kozach75

  Hello Kozach75

  This message appears if the RAID controller detects a problem with the HARD drive. On this path, it is not possible to say why this is happening, but there may be a serious hardware problem. Please contact the Service partner and let check the device. G20 is a new unit and the warranty will cover all costs.

  Check this page http://www.csd.toshiba.com/cgi-bin/tais/su/su_gaspLocator.jsp?pf=true.

  Good luck!

• Toshiba AT10LE-A-108 - strange gradient

  Hello

  I have a model of Tablet Toshiba AT10LE-A-108 and have a strange problem:
  When I see gradient colors, for example, when I run total commander is a gradient from black to grey, the colors are not uniform; There are several horizontal lines up and down the screen.
  Why the picture is not uniform?

  The problem does not appear when in the background is only one color.
  The problem appers in a single game, that I tested, Real Racing 3. When the game starts, there is a gradient of blue screen and is not uniform. Same appearig of horizontal lines from top to bottom.
  Distance between the rows is not the same.

  Thank you.

  Hello

  These gradients are more visible if there is more than different colors used to fill an area and when to begin and breakpoints are further away from each other.
  The gradients are also visible using images with a bit depth of reduced (8-bit or 16-bit) and finally the gradients level depends naturally on the display

• Z50-75: gradient colors, color banding, dark / dim display (display faulty?)

  I'm having a horrible gradient on my new Z50-75 problem. Everything else seems good, but the quality of the display is terrifying. I'm afraid that this is not an unprecedented case. Is it possible if this Lenovo would sell such a display in 2014? I literally counted the shades of colors. First I thought it was a software problem, I checked all possible settings, gamma, saturation, brightness, bitrate etc. but they all seem fine. They promote this laptop as a multimedia device; screen restores all features multimedia strains. The nuances in the 1080 p movies count? Please tell me it's fixable.

  Link to photo/image

  Mod comment: Over size photo converted to establish a link.

  25/03/15 EDIT: revised subject line to improve research opportunities. Amy_Lenovo

  31/03/15 EDIT: revised once 2nd topic. Amy_Lenovo

  
  

• Trigger of gradient

  Hello and once more another question:

  I would like to have some sort of monitoring degraded. For this, I would like to have some sort of gradient trigger which looks the voltage difference between two points of time.

  Maybe something like TTL high when dU/dt is greater than 5V/s so if the voltage drops from 10 v to 5 V in the last second the relaxation should give TTL high, but not if the dropps of voltage from 10.0V to 9.5V within 0.1 seconds and not when the dropps of voltage of 10V to 5V in the last hour. The voltage is variable, and I just want to look for fast voltage dropps / increases.

  Thank you very much and goodbye

  Hilby

  Hello cj, I have a solution for my problem now.

  I use a module of delay time and a module of math for this purpose.

  Spend a day of NCE

  Hilby

• Point cloud: color gradient

  Hello

  I can't find an example where I can create a custom class plot. I have to be able to line the plot of color based on the value of Y and make it look like a smooth gradient. Ideally, I would like to change the size of the line as well. This would allow me to "draw" the 3 variables using a 2D graph. I started (VB.Net):

  Imports NationalInstruments.UI

  Public Class clCustomPlot

  Inherits from point cloud

  Public Sub New()

  MyBase.New)

  End Sub

  Protected / Sub OnBeforeDraw(ByVal sender As Object, ByVal e As NationalInstruments.UI.BeforeDrawXYPlotEventArgs)
  End Sub

  End Class

  But VS tells me that:

  Void of MeasStudioGraphLineColour error 'OnBeforeDraw' cannot be declared 'overrides' because it does not replace a sub in a base class.
  Thanks for your help,

  Nicolas

  I got it to work! For all those who are interested, here's a VB.Net custom dispersion diagram that will show you how/color along the line of control.

  Imports NationalInstruments.UI

  Imports System.Drawing

  Imports System.Drawing.Drawing2D

  Public Class clCustomScatterPlot

  Inherits from point cloud

  Private dblMin As Double

  Private dblMax As Double

  Private colMinColour As System.Drawing.Color

  Private colMaxColour As System.Drawing.Color

  Public Sub New (ByVal MinValue As Double, ByVal MaxValue As Double _)

  ByVal MinValueColour As System.Drawing.Color, ByVal MaxValueColour As System.Drawing.Color)

  MyBase.New)

  "no check is performed for the fact that MinValue<>

  dblMin = MinValue

  dblMax = MaxValue

  colMinColour = MinValueColour

  colMaxColour = MaxValueColour

  End Sub

  Protected override void OnBeforeDraw (ByVal e As BeforeDrawXYPlotEventArgs)

  "Clip data, browse the data cut, map and draw."

  Dim intrigues as XYPlot = e.Plot

  Var clippedXData() As Double = Nothing

  Var clippedYData() As Double = Nothing

  parcel of land. ClipDataPoints (clippedXData, clippedYData)

  For i As Integer = 0 To clippedXData.Length - 2

  Protected x 1 Double = clippedXData (i)

  Protected x 2 = Double clippedXData (i + 1)

  Var y1 As Double = clippedYData (i)

  Var y2 As Double = clippedYData (i + 1)

  Dim point1 As PointF = plot. MapDataPoint (e.Bounds, x 1, y1)

  Dim point2 As PointF = plot. MapDataPoint (e.Bounds, x 2, y2)

  Var pen As Pen = New Pen (ValueToColour (y2))

  Dim g As Graphics = e.Graphics

  g.DrawLines (pen, new PointF() {point1, point2})

  Next

  e.Cancel = True

  End Sub

  Private Function ValueToColour(ByVal value As Double) As Color

  If value<= dblmin="" then="" return="">

  If value > = dblMax then return colMaxColour

  Pctg As Double = (value - dblMin) / (dblMax - dblMin)

  Dim a, r, g, b As Integer

  a = CInt (CInt (colMinColour.A) + pctg * (CInt (colMaxColour.A) - CInt (colMinColour.A)))

  r = CInt (CInt (colMinColour.R) + pctg * (CInt (colMaxColour.R) - CInt (colMinColour.R)))

  g = CInt (CInt (colMinColour.G) + pctg * (CInt (colMaxColour.G) - CInt (colMinColour.G)))

  b = CInt (CInt (colMinColour.B) + pctg * (CInt (colMaxColour.B) - CInt (colMinColour.B)))

  r = Math.Max (0, r): r = Math.Min (255, r)

  g = Math.Max (0, g): g = Math.Min (255, g)

  b = Math.Max (0, b): b = Math.Min (255, b)

  Return System.Drawing.Color.FromArgb (a, r, g, b).

  Var col As Color = System.Drawing.Color.FromArgb (a, r, g, b).

  Return col

  End Function

  End Class

• Non-linear function Lev - Mar - output gradient functions reference table?

  Hello

  I have the whole 8.6 developer and am relatively new to labview.  First time posting, but these tips already have a lot of my problems solved.  Thank you!  My luck ran out however...

  I had worked on a recursive function to fit a set of nonlinear data, when I stumbled upon the function of lev - mar.  What a great discovery... it works very well.  However, I tried to determine the criteria for the named 'f '(X,a)' reference to the static VI which contains the lev - Mar function to fit the output.  The function performs fine without her that it will calculate the slopes in itself if the gradient table is empty, but it takes a little more time and I'm trying to speed up a bit.

  The example 'Fit Gauss surface with offset.vi' is the only example I could find where the output of f'(X,a) of the reference to the function VI is populated, but I'm a little rusty with my calculations and has failed to reverse engineer exactly what should be the values that they had classes in this table.

  I would like to be able to complete the table of f'(X,a) with the data of a 2d versus 3d surface curve in the example 'Fit Gauss surface with offset.vi.  Is attached a screenshot of the example showing the output in the example of f. '(X,a).

  Thank you very much!

  -Bill

  If you do not provide the analytical partial derivatives, LabVIEW will use automatically digital derived partial. You can watch the labview code in detail to see how it does, just open the VI and search for "LM digital gradient.vi.

  I don't know what, "recursive function" in this context, but they have an analytic expression for the partial derivatives?

  Even if the analysis of the partial derivatives are not possible, it may be an advantage to making your own derived partial inside the model. It seems to be much faster.

  You'd basically is to calculate the function several times, each time with one of the parameters that is incremented by a small delta and subtract function calculated with the current settings Plains each and divide the result by the delta. Do everything in a table 2D for the output of f'(X,a).

  The image shows one way to do this inside the model. The black square is a model where you replace you own function (f(x,a)).

  

  Let me know if you have any questions.

• MD3000i individual physical disk - gradient path

  Recently, we have replaced a failing in our MD3000i HARD drive. After letting it rebuild, all the disks are again in an optimal state. But the recovery guru still gives this error:

  Individual physical disk - gradient path
  Gradient of physical disk paths:
  Channel: 0
  Physical disks: (unknown)

  Can I support safely on "Check again", or what would be the procedure I should follow to get rid of this error?

  Hello Diss,

  Since you say that when you look in MDSM all readers are also optimal then you should be able to do a recheck out the recovery guru & have it checked to confirm that all the drives are online & optimal.  If after you run the recheck if the cottage no matter what drive as still having problems, then what I would do is to recheck MDSM & confirm that the drive displayed as failed.  The error normally clears once a car has been replaced but in some cases I see need to run check again to clear the error recovery guru.

  Please let us know if you have any other questions.

• With the help of backup PC Repair gradient Raid 1 HD

  I have a hard drive degraded in my Raid 1 configuration that cannot be rebuilt because of a corrupted file. The hard drive is fine, but I try to avoid a reinstall of Windows to solve the problem.

  About a month ago, before this show, I made an image of my computer all via the Vista Ultimate program complete PC Backup. Since then, I did the weekly backup copies of my files and folders. The backup image and the files are on an external hard drive.

  If I perform a restore using backup of the image, which will fix my problem of gradients current hard drive?

  Hello

  There is no way to be sure and it might further damage, so the best thing to do is totally up the drive
  redundant (using several methods out of the drive) for any need of data before hand.

  You might be better to buy a new drive and using the old (s) as a 2nd or external drives.

  Software RAID (combination hybrid (mix of hardware and software) and RAID) is inherently unstable
  and unreliable. Seems very products used to ensure that the data and valid driver is what ends
  upward it corrupts. Real hardware RAID is quite expensive, however it tends to be reliable.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Text gradient

  I want to make a label with a gradient background. I tried to do by a gradient filled box and by using a label as a mask. But the result is empty. I thought that maybe that's a problem with the QNX label, so I tried the TextField class integrated instead and no luck.

  Anyone know how to get this working? Or a better way to do it?

  you have the opportunity to work with layer modes? Maybe it helps?

• List and container with color gradient

  Hello

  I want to display a list with gradient filled background individual list items.

  While this was possible in Qt QML, but in the Cascades QML - gradients do not appear.

  Anyone able to get the gradients in the list or the bottom of their containers?

  Would apprevicate all the help I can get on it.

  Thank you!

  Created issue:
  https://www.BlackBerry.com/jira/browse/BBTEN-171

  Is it possible to know the roadmap on this issue.

• Alternating gradient line question

  I am trying to create a 'skin' (it isn't really) for a table I displays records from a database.  I could not find a method to display data that I liked for every rank is just a bunch of labels.  The first thing I got out is a shape with a gradient towards the skin line fill, and I use it only for alternating rows.

  However, it only works on the first line, then the two rows is a Uni fill.  What's not here?

  Here is the code snippet:

  for (var x:int = 0; x < dp.length; x++) {
      if (x % 2 == 0) {
          var matrixRow:Matrix = new Matrix();
          matrixRow.createGradientBox(620, 30, 90/180*Math.PI);
          var grad:Shape = new Shape();
          grad.graphics.clear();
          grad.graphics.beginGradientFill(GradientType.LINEAR, [0xDDDDDD,0xDDDDDD], [0,1], [0,255], matrixRow);
          grad.graphics.drawRoundRect(0, x * 30, 620, 30, 5, 5);
          grad.graphics.endFill();
          container.addChild(grad);
      }
  
          //etc
  

  Hey,.

  try to do this instead:

  for (var x:int = 0; x < dp.length; x++) {
      if (x % 2 == 0) {
          var matrixRow:Matrix = new Matrix();
          matrixRow.createGradientBox(620, 30, 90/180*Math.PI);
          var grad:Shape = new Shape();
          grad.graphics.clear();
          grad.graphics.beginGradientFill(GradientType.LINEAR, [0xDDDDDD,0xDDDDDD], [0,1], [0,255], matrixRow);
          grad.graphics.drawRoundRect(0, 0, 620, 30, 5, 5);
          grad.y = x * 30;
          grad.graphics.endFill();
          container.addChild(grad);
      }
  
          //etc
  

  The graphic software does not exactly how you might think. its better if you set the position of the object separately. so in your case its work, its all just do not pass the drawing for you. Good luck!

• gradient background - anyone got it to work?

  I have a body style:

  body
  {
  background: url(/Images/bgGradient.jpg) horizontal #ffffff set;
  height: 100%;
  }

  Provides that a gradient in FireFox, IE but the BB background does not like this...

  Someone at - he found a solution for this?

  Fixed my question was actually the strip of gradient I was using seems to be too long for the BB to manage.  I reduced the length of the Strip, and all is well.

• Gradient - top to bottom

  Hello

  I came across this piece of code that can fill a field with a gradient background.  However, funds in gradient from left to right; I want to fill from top down.

  Even if a previous user has asked this question before and found a solution, the solution was not displayed (so I searched this forum for the right solution, but does not).

  Anyone have any ideas?

  int[] xInds = new int[]{0, getExtent().width, getExtent().width, 0};
  int[] yInds = new int[]{0, 0, getExtent().height, getExtent().height};
  
  final int[] cols = new int[]{deep_blue, light_blue, light_blue, deep_blue};
  
  graphics.drawShadedFilledPath(xInds, yInds, null, cols, null);
  

  Worked!  Thanks for your help!

  int[] xInds = new int[]{0, 0,getExtent().width, getExtent().width};
  int[] yInds = new int[]{0, getExtent().height, getExtent().height,0};
  
  final int[] cols = new int[]{Color.DEEPSKYBLUE, Color.LIGHTBLUE, Color.LIGHTBLUE, Color.DEEPSKYBLUE};
  
  g.drawShadedFilledPath(xInds, yInds, null, cols, null);
  

• Diagonal in blackberry java gradient

  Hi im trying to draw shapes with Diagonal gradient, but the problems is its gradient dosent seem to agree. Here's the code I did. Can I ask for suggestions on how to make this tnx in advance.

  Protected Sub paint (figure net.rim.device.api.ui.Graphics) {}
  int width = 300;
  int height = 300;
  int [] xPts = {0, width, width, 0};
  int [] yPts is {0, 0, height, height};.
  int [] colors = {}
  Color.BLACK, Color.BLACK, Color.WHITE, Color.BLACK
  };
  graphics.drawShadedFilledPath (xPts, yPts, null, null);
  }

  Try:

  int [] colors = {}
  Color.BLACK, Color.GREY, Color.WHITE, Color.GREY

  };

• Linear gradient background to label?

  Hello..

  Its posible put a label on a gradient background? I try but does not work...

  It overrides just to change the color of the text, it's ok

  You should try to add 00 to your color int, like this:

  Bottom bgNaranja = BackgroundFactory.createLinearGradientBackground (0x00c14d02, 0x00c14d02, 0x00eb870e, 0x00eb870e);