Graduate student

Similar Questions

• IS IT TRUE THAT IF I BOUGHT A PRODUCT WITH A DISCOUNT STUDENT, HIS WORK STOPPAGE WHEN GRADUATE STUDENTS AND STOP BEING A STUDENT?

  IS IT TRUE THAT IF I BOUGHT A PRODUCT WITH A DISCOUNT STUDENT, HIS WORK STOPPAGE WHEN GRADUATE STUDENTS AND STOP BEING A STUDENT?

  If you want to just Photoshop CS6 Extended, you should be able to get it for $350 price of edu.  Call sales number in the link below or contact your reseller of Edu.  As reported in the link, it will not be updated and may not work on future operating systems. Adobe Camera Raw is stopped to 9.1.1 which means you will need Dng conversion on the camera models later. In short, it is a dog, and the latest permanent.

  Creative cloud now includes the features of Creative Suite Master Collection and Design Premium

  Adobe can only offer more and at least for me, the Plan of photography is a good deal for $120 a year annual commitment.

• October graduate student undecided about student CC Abo?

  I'm a grad student in October this year!

  Can I still register for a student creative cloud abo? And what will happen after I graduate? Is it automatically promoted to the business model?

  Best regards

  Joe

  I understand (I do not work for Adobe) is that a subscription to education is based on your state when you subscribe, and that your subscription lasts for the term of one year

  When you renew, it will be at the level of education not

  Chat support: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• Graduate student can

  I graduated in may 2016, am I am eligible for a full year of the reduced student membership?

  Hello

  Greetings!

  Please go afterwards Adobe Creative Cloud training FAQ of FAQ, if it does not help contact us please contact customer service

  Kind regards

  Gary singh

• earn money with the graduate students?

  Hey there!

  I want to buy the permit student for Adobe CC but I m not sure if I m allowed to earn money with it. For example on YouTube, etc.

  Thanks in advance!

  macBalboa

  https://helpx.Adobe.com/x-productkb/policy-pricing/Education-FAQ.html

  Can I use Student and Teacher Edition products in trade?

  Yes, Student and Teacher Edition products can be used commercially on your private computer. They cannot be resold.

  Concerning

  Stéphane

• Students are eligible for student discount?

  I purchased CS4 web premium. My brother is graduated from college yet because he needs to do the course before he can. The problem is that it is not the software to work on his portfolio. He still has his school ID (it has no date printed on it), but has not been entered in all classes for a year now. As a graduate student intern has not yet, can qualify for a student discount?

  If it is not currently enrolled in school and the payment of tuition fees while it is not eligible for the discount.

• programmable calculator

  I hope that the company or that someone can help me.  I've owned an HP 17BII calculator.  I used it for many years and had many precious equations programmed into the machine.  I even asked graduate students to buy the calculator in my classes at UCLA.   My wife lost my calculator.  It could cause a divorce.  I know that I can resume the equations of spreadsheet Excel which is clumsy and slow.  WHERE CAN I GET THIS CALCULATOR AGAIN?  Is H.P. still?  Now I am old and I would love my calculator back program variables qauanta.  Can someone give me help?  A program I wrote computes the following variables of real estate, for example: gross multiplier, down payment, mortgage interestrate, rate of return on investment fees.  I still have the equation.  It has been used by many brokers in the areas of L.A. and gave them a huge advantage.  Put in any 4 variables and it calculates the other variable, instantly.  This same equation has worked for the financial obligations and predicted the federal funds rate.  Another equation calculates all variables in general relativity on gravity.  His version was so fast, that it would save hours of work.  H.P. must have established a second model.  I can't believe they wouldn't just calculator of.  Thank you very much.  Dr. Norman Peters, former Professor of mathematics, U.C.L.A.

  Of course just search the Web.

  http://www.Amazon.com/HP-17bII-financial-calculator-silver/DP/B0000CAQ0C

• HP Envy 4500 series: printers has been removed

  Help, please! I accidentally reset my settings to the printer when you try to restart my printer because it was frozen. I tried to reinstall the printer several times but failed. When I'm in the printers option in my settings, I tried clicking on the button "+" to add my printer, but have been unable to get it to connect. It is completely wireless and I can not get the printer to appear in any screen. When I got to my printer a few months ago, my computer basically put it all for me. No cables needed. I desperately need help my printer because I am a graduate student and need to print almost every day. Any help would be wonderful I've exhausted all possible ideas I have.

  Thank you!

  Hello @kkall,

  Welcome to the Forums of HP Support!
  
  I would like to help you today with the addition of your wireless HP ENVY 4500 e-all-in-one printer on your computer Mac OS X 10.10. I understand that everything has started when you accidentally reset your printer settings. Therefore, I will start by ensuring that your printer is always connected wireless. Once we determine if the printer is on the network and 'talk' wireless with your Mac, you should be able to (+) add your printer back in. Please follow the steps below.

  Step 1: Check of connectivity:

  1. On your printer, down arrow until see you Wireless
  2. Select OK in the wireless
  3. Select Wireless details and click OK
  4. Make a note of the IP address that appears
  5. On your Mac, open your internet browser
  6. In the address bar type the IP (omit for www.)
  7. Search this site
  • Opens a Web site for your printer: If means that your printer and your computer "speak" wireless. Please proceed to step 4 below.
  • If a Web site for your printer does not open: This means that your printer and your computer communicate wirelessly. This would result in your Mac not to 'see' the printer (+) Add again. In addition, If none displays IP address on the printer, which means that the printer is is more connected to your wireless network. Please follow the steps below.

  Step 2: Run the Setup wireless Assistant:

  1. On the front panel of your printer, down arrow for the Wireless option
  2. Click OK
  3. Select the wireless configuration wizard , and then click OK
  4. When you are prompted to choose your network name SSID
  5. Fill in your password (key) wireless. It is case sensitive.
  6. Once the wireless is connected successfully, check the IP address of the printer
  7. Now, on your Mac take the IP address and enter it in the address bar of your internet browser
  8. Search this site
  • If the Web site for your printer opens: The printer and the computer are now 'talk' wireless. Please proceed to step 4 below.
  • If the Web site for your printer does not open: The printer and the computer are not 'talk' wireless. Please proceed to the next step.

  Step 3: Powercycle network:

  1. Start by unplugging the power cable to your router
  2. Once your router is unplugged, turn your printer off
  3. Then, shut down your computer
  4. After 30 seconds to 1 minute, reconnect your router back in
  5. Then, turn on your printer
  6. Turn on the computer

  After a few minutes the internet connection will be back. On your computer to access a few sites test Web to verify that the internet is running correctly. Once the internet works again check again the IP address of your printer. Try to open the site on your Mac printers again using the printers IP address.

  Once you are able to open to the site of printers successfully, proceed to the next step.

  Step 4: Add your printer:

  1. click on the menu of Apple , then Preferences System.

  2. click on Print & Scan

  3. click on the plus sign , click Add a printer or a Scanner, click the name of your printer

  4. click on the area of use or with the help of Print and then select the name of your printer on the shortcut menu. Ensure that the driver HP Envy is.

  

  5. click Add to add the printer to the list.

  -Source

  Now that your printer is added, please try printing again.

  Please reply to this message with the result of your troubleshooting. Good luck!

• LabVIEW 2014 SP1, hardware and real-time PXI

  I'm doing my third LabVIEW Wipe/reinstall in as many days, completely frustrated (and after several calls an hour with the support of NEITHER).  Here's the situation:

  I wrote a fairly large (1000 VI) project of Acquisition/control of our graduate students data used for behavioral experiment on sound localization.  It was developed in 2012 LabVIEW with the module running on a PC/PXI system real time.  It worked very well and was brought successfully under LabVIEW 2014 (with upgrades comparable to the software of the PXI.

  About 18 months ago the students began to write their theses, and at one point stopped gathering data.  Also, at some point, I upgraded the software on this system to LabVIEW 2014 SP1, but I am not sure that I never tested my software with this new system.

  This week, I pulled up the system to use MAX to open some test on the PXI multifunction and DIO card panels to control manually one of the stimuli.  I discovered that MAX could not communicate with the advice on the PXI system - he attributes them as devices VISA, indicating each Board with an icon with a red X means that he could not communicate with the IP that I had assigned to PXI.  Yet, MAX (a) could "discover" this PXI, (b) MAX can 'see' its IP address, and (c) Windows could not only Ping the IP, but could FTP on the drive of the PXI and I could move files back and forth.

  I did two sequences complete "Wipe/reinstall" using LabVIEW 2014 SP1, all giving the same result.  I know it has worked in the past, including when I installed LabVIEW 2014 (without SP1), something I repeat myself now with my third installation.  I discussed with OR (thin?) possibility that there is a "hidden defect" in the Distribution of the SP1, one that is visible to LabVIEW RT users using PXI hardware and go unnoticed because (a) install a few sites of LabVIEW versions SP1, (b) a minority use the RT Modules and (c) PXI is "old material".

  If anyone has such a system or saw a similar problem, please answer.  I'll do a follow-up post if I managed to 'fix' my system by this last reinstallation "a solution of worked before."

  Bob Schor

  Well, the answer is that, in my system, LabVIEW 2014 SP1 with LabVIEW Real-time connected to a PXI system does not appear to connect to boards plugged into the chassis.  Returning to LabVIEW 2014 (fall release), installed in exactly in the same way that the three failed attempts of LabVIEW 2014 SP1, works immediately.  Engineers OR will try to duplicate/verify/possibly patch? in this issue.

  Bob Schor

• How to generate digital impulses to run the engine step by step in a sinusoidal motion using the NI DAQ 6229 map profile

  
  

  Hello

  I finally found a way to do it. The analog sine wave is converted to digital and sampled. The consecutive values are compared and if the least significant bit (LSB) will change a pulse is sent to the stepper motor to activate a single step.

  I've included the sub - VI who accomplish it for block engine and connector of particular Stairmaster I have. The front panel two sub - VI is quite messy, but the diagrams should be much clearer. The sub - VI get inputs from a third VI which I didn't understand. Then take a look at table VI of connector to understand. I hope this helps. A little messy but worked very well in the end of my application.

  Thanks again for all the help. I appreciate that very much.

  Kind regards

  Sylvie abdo

  Graduate student

  Aerospace and mechanics Enggineering

  University of Southern California

• FFT cross correlation

  Hello world!!

  I am a graduate student and have to do a research project. I have to calculate the field of travel and the distribution of strain of undeform to the distorted images loaded sample speckle... To calculate these parameters, I have to use cross-correlation or preference usinf FFT method. I have a problem regarding cross corellation using the FFT method. I created a program with the help of furoms displayed.

  I extracted 32 x 32 pixels of the undeform and images distorted speckle and paved with average intensities there. Also, I removed the d.c. component of the images under subtracting intenties it means intensity and try to calculate the cross using the FFT method correlation.

  Referring to the book that I read, the location of the peak value gives the relative movement between the two images. However, the result of my program, the location of the peak value will always be at the point of coordinates (x = 0, y = 0) so that means that there is no relative movement between two images.

  Why is it so? Pls help me...

  Attached, it's my program created and a Subvi for padding and a sample of images (loaded sample).

  Dear Laudz,

  I tried to save in 7.0, but you may find that some subVIs are missing. I hope that you are able to replace them on your end. So you're on the right track.

  Good luck with the rest of the application.

  ~ Nate

• 2D U16 vs 1 d Wfm in Nchnl Nsamp

  Hello

  I tried to do a multiple channel with PCI 6229 Council 2090 BNC data acquisition work. After you have created the virtual channel and start the DAQ task when I acquire the signal, I get a strange behavior. I give a square input signal of 1 volt and zero volts.

  When I use the 2D U16 Nchnl Nsamp: I get peaks in amplitude constant for the zero volt part, where there are reading the 1 volt portion correctly.

  Whereas when I use the Nsamp of Nchnl of Wfm D 1: I get about the signal that is entered into the system with a behavior of square wave and a suitable voltage range.

  Please suggest as to what is the difference between the two conditions, and perhaps why am I cleats for the zero volt part.

  Concerning

  Amanmeet Garg

  Graduate student

  Simon Fraser University

  Burnaby, Canada.

  Thanks Dennis,

  Your reference is a good information. I was able to solve my problem by keeping the acquisition as a signed integer of 16 bit, as I am able the negative tensions as well.

  therefore in the region of zero volts /-EV system was him giving a value of 65535 in case of unsigned 16-bit sampling.

  I'm balance correction and external filtering in MATLAB and get reasonable results.

  Concerning

  Amanmeet Garg

• Calls excessive deferred Procedurwe (CPD) &amp; material interruptions after installing Win 7 (64-bit)

  After a clean install of Windows 7 Ultimate, I've had a pretty big problem. Whenever I try to transfer or backup files to a portable HD USB device only a few files are transferred and the CPU load then engulfs the system (85-92%) with hardware and procedure calls deferred (DPC) of the interruptions as shown by Process Explorer. Stop the backup/transfer or disconnect drives is not good - the use of the processor runs at a constant of 70-90%. Only a reboot gets rid of the problem. Here are the relevant facts and things I did to find the problem:

  (1) I used three external HD drives, a HP Personal Media 1 TB and a hard WD 500 GB and a 1 TB IOMEGA. I tried all 3 external HDs on alternating ports USB - same problem.

  (2) all discs worked perfectly before on my Vista-64 (PC) system and both drives work fine on both my other XP systems.

  (3) my system is a HP Pavilion PC m9517c with a processor 2.3 ghz Quad-core, 8 GB of memory and a 1 TB HD, so the processing power is not the problem.

  (4) I have tried the same transfer after a clean boot with all disabled menu items and services - same problem start.

  (5) in Device Manager for each disk under the policies tab, I also spent the default selection of "Rapid withdrawal", which disables the cache to "best performance" that allows to write cache (it could be a problem of write caching since it will transfer a few files before it grinds almost to the stop of thought)-same problem writing.

  It seems e problem a Win 7. Can anyone give me any help would be appreciated. HP has been less useful for their support and knowledge.

  Problem solved! Thanks CharlesHP (graduate student). I spent a week on & off with HP support, both on the phone and by e-mail. They did not come close to understanding or solve the problem and you resolved easily. It took only the Microsoft hotfix that you me bound. Thanks again.

• USB-to-serial VISA read problems

  Hello

  I'm trying to control several mass flow controllers attached to a hub series Alicat BB9. The hub is then connected to the computer via RS-232 series. The computer on that what is done is not a serial port, so an adapter series / usb is used. When it is plugged in, the computer (XP) recognizes the series / usb and requires a driver. I installed a driver from the manufacturer of the adapter, downloaded from the internet. The same driver is used on another computer (Vista) without any problem.

  I am able to verify that the device is installed and operating correctly via the Device Manager. I am also able to see what the device COM port is turned on. Opening OR measurement and Automation Explorer (MAX), I am able to see the COM port listed under serial devices. I am able to validate the port settings and open a VISA session with the device. However, any time I try to read from the device, what happens to expired. I get the error xBFFF0015. I have for the parameter timeout at 5000 and 10,000 without change.

  When you run a VI that is used in the laboratory to control the same configuration, I can trace the error to a VISA read Subvi. The returned 'buffer' is not a value and will raise an error. I can plug the USB key into a laptop that has the same VI and it will run without problem. The Subvi "VISA read" return a value when running on the laptop.

  I'm under LabView 8.5 and 4.4 of VISA.

  If anyone has a suggestion that could get this to work I would appreciate it a lot. Also, I am a graduate. student who is working on this issue and my understanding of LabView is not terribly large, so dumbed-down responses would be nice

  Thank you for your help.

  Connor

  Thank you for the follow-up. However, I was able to solve the problem already... It was simply a driver update that solved my problem. The driver being used is "Prolific usb-to-serial" and version 1.. I upgraded 2.0.2.1 and it works fine now. I thought I had updated to the most recent before and apparently I had not... kind of delay. But thanks anyway!

• How can I generate modulated amplitude signal?

  How can I generate modulated amplitude signal?

  I got this VI examples NOR but in this VI "m message signal .vi is missing. So, how can I generate missing VI or VI full for the Amplitude modulation signal using 5441 PXI and PXI-5610 as upconvertor. If possible guide me steps to generate.

  Thank you and best regards

  Isabelle Kodgirwar

  Graduate student

  University of Texas at Arlington.

  Hi Aron,