digital camera via firewire is not recognized

Similar Questions

• Can't intall Olympus digital camera model FE4020 USB not recognized

  Original title: Help with Olympus Digital Camera Model 4020 Setup
  I'm currently developing my model Olympus FE4020 digital camera... I use the USB port that is provided with the camera, however, Windows XP won't let me make the disc (E), no matter who is.  I get a message that the computer does not recognize this and cannot do the format.  I can't use the camera to do something without the implementation through the computer first. I hope you can help with this problem.

  Hello

  1 do you have similar problems with other USB devices connected to the computer?

  You can download the Auto-connect USB driver from the link provided below and check if that helps.

  Auto-Connect USB driver

  http://www.Olympus.co.jp/en/support/IMSG/Digicamera/download/software/index_other.cfm#driver

  You can try the steps of troubleshooting provided in the link below for solving problems with USB devices not recognized Windows XP.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  http://support.Microsoft.com/kb/925196

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

• Satellite A60 - impossible to connect the camera via firewire (IEEE)

  Hello

  Have problems with the dv camera connection to
  laptop computer via cardbus IEEE (firewire)
  It seems to be connected, but none noticed and not take at all.

  I think the problem is with the drivers - but what exactly should I install?

  Thank you

  I don't know which cam you use but when the cam is connected and recognized correctly, it will be listed in the Device Manager. So, do you need some software to have access to the material recorded. By using this software you can record the film on the computers HARD drive.

  Later, you can create DVD or do something else. I have more old digital camcorder tape 8 of 8mm inside. I connect the cam with firewire cable too. When the cam is activated, it is recognized and I can copy films of the tape to the computer s portable HARD drive. For this I use Ulead Movie Maker software.

  What exactly do you do with your cam?

• The new digital camera, Media Player does not play Manual of Sanyo software pack. Play other CDs that I have limited computer

  Elderly person with limited skills needs help for Media Player to read Sanyo software pack user' manual e.  Play other CDs

  I contacted Sanyo support that they have not yet responded
  I went to the computer and there is that a bunch of stuff on disk 1 is a typical installation.  I'm not here because being new to computing, I did not want something I could not get rid of our force is hurt my system.
  Thanks for the link to the .pdf I want to go to it when I'm done here.
  I plugged the camera on computer and recognized so it will probably download photos - took everything but you.
  I started to go through the help section about this kind of things from forum and there is more here that I've probably never catch on to.  I've already posted go far if I post another question or it stays around forever?
  Thank you again for your interest you must really know things you have several medals - keep up the good work
  At latest

  ================================
  Installation of the software is probably not necessary.

  If your device is recognized, you can copy the
  pictures in a folder on your hard drive. See the
  next article:

  Windows Vista
  How to make photos of
  my camera to my computer?
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-get-pictures-from-my-camera-to-my-computer

  If you do not have a printed... manual it can
  be useful to print the .pdf for later reference.

  Your previous posts will remain in the forum.

  The medals are awarded based on the received points
  by posting messages in this forum.

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Western Digital 1 TB passport is not recognized

  Western Digital 1 TB My Passport Essential Portable hard drive is not recognized by the BDV-E370. any clue?

  Hello
  Most likely your Passport 1 TB drive is formatted as NTFS. The BDV-E370, as well as all the sony TV and DVD players will recognize USB drives formatted in FAT32 only. NTFS is not supported. FAT32 will recognize up to 2 TB.

• USB camera olympus fe-170 not recognized by windows 7

  Windows 7 will not recognize the Olympus FE-170 digital camera I have loaded down the soft ware and also updated software adobe reader as requested

  Hello

  1. What is the status of the device in Device Manager?
  2. do you get an error message?
  3A this works much earlier?

  Follow these methods and see if the problem still occurs.
  Method 1: Run the hardware and devices Troubleshooter
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: Use Device Manager to search for the hardware changes

  Use Device Manager to find the hardware changes. After your computer search the hardware changes, it can recognize the USB device connected to the USB port so that you can use the device.

  To check the hardware changes, follow these steps:

  a. Click Start, type Manager of devices in the search box of start and press ENTER.
  In Device Manager, click on your computer so that it appears highlighted.
  b. click Action and then click Scan for hardware changes.
  c. check the USB device to see if it works.
  d. restart the computer.

  Method 3:
  
  You can also update your chipset drivers.
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Method 4:
  I also suggest you try connecting to the computer or the port of differnet.

• Moving video files from digital camera, date taken does not save

  On Win7 Pro I'm having a problem where when I move the files from my digital camera Canon or my Sony digital camcorder to HDD the date taken on the videos aren't save. It defines at the time I moved the hard disk instead. It comes to all the dates in the properties.

  It's only when I copy the video files keep everything file photo.

  This happens when I copy files directly from the camera or the SD card

  All the files on the camera are correct but none of those on the hard drive.

  Ok. I had trouble to transfer photos from my old computer to my new computer.  The dates and times on the pictures changed.

  I finally got the moved and kept the correct dates on each photo.

  That's what I did:

  1. I opened the 'Pictures' folder on the old computer and click on "Select all" under the tab 'Edit' at the top.

  2. then I went to the "Edit" tab and choose "move to folder".

  3. in the next window, called '' Elements to move, '' I found the file that I wanted to move the photos to and selected this folder and then clicked on "move".

  4. all photos have been transferred to the new computer with the date and time correct.

  5. However, this deletes all photos from the old computer.  But I do not really need them on the old computer since I will be recycling with Dell.

  We sincerely hope that this information helps someone else, since I had a hard time finding how to do this task.

  Good luck.

• digital multimedia card reader is not recognized by the windows operating system 7

  is there a solution to my problem with the digital media card reader not recognized by using the windows operating system 7

  This card reader appears in Device Manager?  If Yes, then you have a problem with Windows 7 'default' to not show empty removable disks, which aren't floppy drive.

• Sony DSC-P150 digital camera 7.2MP does not connect to Windows 7

  Sony DSC-P150 digital camera 7.2MP...

  I TRY TO CONNECT TO WINDOWS 7 32 BIT, BUT ISN'T

  RECOGNIZE... PLEASE HELP ME

  You use W7 starter?

  If Ive followed the links to the right - http://store.sony.com/webapp/wcs/stores/servlet/SYAccessorySearch?storeId=10151&langId=-1&modelNumber=DSC-P150&x=0&y=0 and click on the support link, then "drivers and software", then your model number (DSC-P150), "Windows 7", and finally as "windows drivers and compatibility," he said:

  WINDOWS 7
  Drivers:
  The drivers needed to connect your Sony camera to a computer and transfer the files are already included in the operating system.

  
  Not supported:
  

  The Windows 7 Starter edition is not supported.

  
  

  
  

  Where the query re W7 Starter.
  

  
  

• Not getting FireWire devices not recognized on Windows 7

  Recognition FireWire problems
  My computer with Windows 7 Prof 64 bit doesn't recognize firewire devices that I connect to it.  Device Manager displays the drivers 1394 work very well.  My WD external hard drive so my Sony HDR HC5 camcorder are more recognized when I plug them cold or hot plug. Two of them have worked very well for more than 2 years and now for some unknown reason, that they stopped just recognized on any of 3 firewire ports available in my new DELL Studio8000 PC with a firewire card Texas Instruments PCI with 2 firewire ports. I have replaced the cables, uninstalled the drivers and reinstall them without any result.

  Hi DMJ06,

  Thanks for your post.

  If the manufacturer indicates a hardware failure on the device, it is likely, it is accurate.

  If it does not work on any of your computers, it's a strong argument for their suggestion.

  I propose to repair the unit if possible.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Photosmart R927 digital camera 8.2MP does not

  Oh, help. I need to buy a 'new' mother HP camera digital sort of similar to the one she had for years. -one that is COMPATIBLE WITH Windows 7. I think that this HP Photosmart R927 8.2MP camera might be just the answer, but when I continue to check on the COMPATIBILITY PROBLEM, I get all sorts of different answers - including some very 'vague' responses on the sites HP themselves. I can't LOSE MY LITTLE money and later discover that - Oh, NOT REALLY will work with Windows 7 after all - SO PIS, Buddy. Any actual Experts out there who know how to find the truths?

  Hello

  1. what exactly happens when you plug in this device?

  2. you get any error message?

  3 - is the camera not detected in Device Manager?

  I would suggest you follow the given steps and check if it helps

  Method 1: Try to run the hardware troubleshooter and check what the problem is and fix it accordingly.

  Follow the link below a convenience store opened.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: also I also suggest to return the item and try to run the troubleshooter and check if it helps.

  Tips for solving common driver problems:

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

  See also:

  Automatically get recommended drivers and updates for your hardware

  http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

  Reference:

  http://www.microsoft.com/Windows/compatibility/windows-7/en-us/Details.aspx?type=Hardware&p=HP%20Photosmart%20R927%208.2MP%20Digital%20Camera&v=HP&uid=L2056A&l=en-US&pf=4&pi=3&c=Cameras%20%26%20Photo&sc=Digital%20Cameras&os=32-bit

  Hope this information is useful.

• Camera GE not recognized Vista

  I can't get my vista based system to recognize my camera GE A1250 digital camera via usb conn. The camera is recognized on my computer laptop windows 7. Is there a driver that I need and how do I get it?

  Contact the manufacturer: GE.

  Look for a section drivers and downloads on their Web site.

  See you soon. Mick Murphy - Microsoft partner

• External hard disk is not recognized in my computer

  My external Western Digital USB hard drive is not recognized in my computer.

  I see it in Device Manager and computer management/disk management but not in my computer.

  Update driver, a refreshed in disk management and several reboots.

  The external hard drive is there but not recognized on my computer.

  I need to restore from this external hard drive, but I can't access it.

  most of the answers deals with reformatting... the original post says he wants recover from this drive to reformat does not help... the external usb drives, equipped with cables that have 2 ends of usb, connect the two in to; separated on the MB, separate usb hubs usb ports it is because power is causing problems (current rises to voltage drops) then sometimes access to the drive causes the voltage on a single falling down USB, think the os it's read-only / permission issues, with 2 connected to separate power sources the question goes... they were built that way...

  I also recommend to never put a USB through a third party hub as more often which can cause problems with the unrecognized drive.

  That said, yes I had to reformat to access a drive, if you cannot write to a disc rclick and observe the permissions, if you have formatted the drive on another pc and not changed the permissions for everyone, then under sercurity see you permissions set on a long number, it is because he is always set to original pc (or the id of this pc). Sometimes you can over the way these parameters by taking possession (in the s parameters) and reset to everyone on the local pc.

  Something else I found on the disc is not recognized... Plug it into the usb port as described above and restart the pc, I got this job...

  Note: I deal with almost all the avalible from different readers that my clients use them all.

• Since the installation of a wireless router, the computer does now recognize my digital camera's SD card. What should I do?

  Yesterday, we installed a wireless router. Now my computer does not recognize the SD card in my digital camera. I do not have

  idea how to solve this problem. Help, please

  Hello

  You can view these methods:

  Method 1:

  I suggest you to try the connection to differnet computer and check.

  Method 2:

  Try to insert this to other USB ports and check if it works.

  Method 3:

  Remove and reinstall all USB controllers

  To remove and reinstall all USB controllers, follow these steps:

  1. Click Start, type sysdm.cpl in the start search box, and then click OK.
  2. Click the hardware tab.
  3. Click the Device Manager button.
  4. Expand Bus USB controllers.
  5. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  6. Restart the computer and reinstall the USB controllers.
  7. Plug in the removable USB storage device and test to make sure that the problem is solved.

• Canon EOS 20 d digital camera 8.2MP

  How can I view and download pictures on my Canon EOS 20 d 8.2MP digital camera on my Windows & desktop PC?  The device driver is not found, and the manufacturer does not offer a driver.

  Hello

  Unfortunately, Canon EOS 20 d digital camera 8.2MP is not compatible with Windows 7.

  Please contact Canon Support for assistance.

  Kind regards
  Afzal Taher
  Microsoft technical support engineer