graphic execution using the unix command

Similar Questions

• 9.2.0.6 moving database files and redologs using the dd command.

  Hi all,
  
  I need to know if someone have take a cold copy of database (data file and redologs) using the unix dd command.
  The problem is related to the value to be assigned to "bs" in the DD.
  
  For the data file, I know to do the same thing of block_size for the tablespace. I'm not sure of the value to assign to "bs" to the redologs.
  
  Any suggestions are appreciated.
  Thanks in advance
  
  Adriano
  
  PS. I'm pass raw partitions of the data files and of redologs from HP - UX 11.11 RISC on SYMM8830 for HP-IA64 using lvm on HP XP24000 with veritas.
  
  Published by: adriano.ba on October 17, 2008 12:23

  as to the "bs" to command "dd"?

  DD if = of = bs = 1000M

  If your raw device is in GBs, you can give a higher as 1024M... Sometimes the operating system does not have higher values as 1 GB... in this case, you can give all the values as 1024 K, 100 M, 500 M... Like this...

• I get a message: to use the 'java' command line tool, you must install a JDK.  I tried 10 times to install without success.  Help, please.

  I get a message: to use the 'java' command line tool, you must install a JDK.  I tried 10 times to install without success.  Help, please.

  You probably have some of the older than the needs/desires software legacy Java installed.

  Please see these sons of community message:

  After the installation of El Capitan, I get the message: to use the 'java' command line tool, you must install a JDK

  Just found this last Java does not work with El Capitan

  This is the Apple link to the legacy version of Java 6.

  Download Java for OS X 2015-001

  First of all, I would like to try to identify what application generated the next message and update (delete) this request as the case may be. If you need to run Java then, as the Apple Support page says it's certainly preferable that your installation of Java entirely up-to-date with the Oracle's Java course. If you can get without Java, you should install it not - like the Flash, it should not be installed unless you have no choice.

• Control mouse using the voice command

  Hey...

  I'm doing project control of mouse by simple voice command and also the click of mouse using the voice command action...

  I have problem to compare my order with the standard command...

  Please help how I can make this comparison and produce output...

  Ginelle

  I would like to start by this library. I found this a long time ago, but it would allow you to build what you need

• Use the same command

  Hello

  My VI look like her:

  

  I would like to re - use the same command in my "everything".

  I have several cases and I don't want to create several command text.

  If someone kown one travel, please tell me how.

  Next

  Hello

  I may not be correctly undestand your question, but you can use a local variable for what you're trying to make...

• Cannot use the 'MDGS' command in Windows 7

  original title: need help with a Comand prompt

  Hi, I need help with a problem in the command prompt. Whenever I try to use the "msg" command, it displays an error indicating it is unavailable this command has been changed?

  MSG is not a command that is available in Windows 7.  You can get a list of available commands by typing help at the command line, or

  help > C:\Users\YourUserName\Desktop\Windows7DOSCommands.txt

  to put the list in a text file on your desktop

• Trojan: Win32 / Sysdef - fake. How do I restore office files, etc. by using the attrib command? Thank you

  I worked with the Microsoft Support to discover some hidden files. The tech told me that the files are still there, just hidden. He used the attrib command to discover some of the files. The tech said the remaining files must be made manually, how?

  How to find the files? My office is still hidden. I have bookmarks and word files.

  Thank you

  See Steve Cochran's response, dated June 2, 2011 in this thread: http://answers.microsoft.com/en-us/windows/forum/windows_vista-security/how-do-i-recover-windows-files-from-the-start-menu/96d70458-4fb4-403f-ac96-e88f5b6ffec4

  See the instructions for removing the difficulty system in the following link: http://www.bleepingcomputer.com/virus-removal/remove-system-fix which includes a presentation about the hidden files and folders.

  Are you sure that you have more malware on the computer?  Have you run everything on scanners such as Malwarebytes or Superantispyware?

• Create a new folder or change the name of a folder on the desktop does not display until I use the refresh command

  After changing the name of a folder or a file on the desktop or by creating a new folder (and then hit enter), the folder or the text file doesn't change - until I use the Refresh command. Then, the text shows correctly and the movements of folder or a file in a place open to the top left of the screen. Before using "Refresh" the folder or the file will not open. When I save a file on the desktop is not visible until the 'Refresh' is used. Sometimes, but not always the same behavior occurs in other folders as well.  I use Win XP SP3. Can someone please shed some light on this?

  Hello

  ·        Since when are you facing this problem?

  ·        Remember to make changes to the system?

  ·

  Method 1:

  I suggest you check in safe mode. Follow the steps mentioned below.

  a. restart the computer and keep tapping F8 until you reach the start menu.

  b. click on safe mode from the list and press ENTER.

  Check if the problem persists.

  Method 2:

  I suggest you to scan your system for viruses and malware using a care Microsoft and Microsoft security essentials. Check the links below.

  http://OneCare.live.com/site/en-us/default.htm

  http://www.Microsoft.com/security_essentials/

  Method 3:

  Create a new user account and check if the problem persists.

  How to create and configure user accounts in Windows XP

  http://support.Microsoft.com/kb/279783

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• When I get an email, according to windowsmail with attachments, I can't file attachments by using the file command menu

  original title: impossible to file attachments in mail

  Hello; I'm with family Vista premium and windows mail as a messaging system. I was with IE8, and now I've migrated to IE9.

  When I get an email, under windowsmail with attachments, I can't file attachments by using the file command menu. This option is blocked. Under windows mail, I went to tools, options, security and made sure that: Let not the attachments which are unsecured... box be deselected. It makes no difference, and I still can't save attachment like this; I CAN SAVE BY CLICKING and opening the attachment and save it but it is not satisfactory that I can't save the attachment by using the file command menu.

  Can you help me please?

  IE9 is certainly the culprit and there is more questions. I know that some MVPs have contacted their MS threads about it and even received no answer.

  My guess is that MS will not address this issue. Do not forget that the development team of Windows Mail is dissolved by the MS in June 2006. (Yes, while Vista was still in beta). I seriously doubt they care.

• How to use the MSG command

  Hi all

  I want to use the MSG command send message from my computer to other computers on a network. We work in windows 7 and I used the following syntax:

  MSG * / server IP: address 'Message '.

  but the message back to my computer even if I use the IP address of another computer

  Thank you

  Hi Michael,

  Advanced networking issues are supported in the TechNet Forums. I suggest you send the request in the TechNet forums.
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking

  Hope this information helps.

• How can I prevent the access denied message when you use the shutdown command?

  I use shutdown /m \\computername/s

  I have "Access denied (5)" as an answer.
  I am admin on all my computers. Same username and password on each of them.
  How can I get this shutdown command to work remotely, so I can't access every computer command prompt via Remote Desktop?
  How can I prevent the access denied message when you use the shutdown command?

  Hello

  I suggest you to report this issue in TechNet Forums for Windows 7 networks: http://social.technet.microsoft.com/Forums/en-US/w7itpronetworking/threads

  Thank you.

• Much more difficult to move the individual layers in PS CC 2015.1 (using the shortcut COMMAND for the move on the Mac tool) in older versions of PS

  Hi all

  I find that selecting and moving layers in Photoshop are MUCH more difficult to 2015.1 CC PS as in earlier versions of Photoshop (using the shortcut COMMAND to temporarily toggle the tool move).

  In earlier versions of Photoshop, if I had several layers and one of the layers selected in an image by hitting the keyboard shortcut CTRL-COMMAND (that I had my mouse over the image), and then selecting the name of the layer that I wanted to work with / move, I could then easily hit the "COMMAND" key (which is a shortcut for the tool MOVE) if I happened to have another selected both tool and this would automatically switch to the MOVE tool until what I released the button COMMAND key. Then I could move the layer as needed.

  Well, in the current version of the PS CC 2015.1 this shortcut (using the COMMAND to convert temporarily the MOVE tool) does not work very well the Group WHOLE layers (if I have layers within a group) is selected instead of just the layer I had chosen.

  ONLY if I actually choose the MOVE tool in the toolbar it works correctly and I am able to move the selected layer.

  Oh my God, it was so much harder to explain that I thought it would be! I hope this makes sense.

  Hi Christine Holzmann,

  It is a known problem with the latest update.

  For now, the workaround is to select the move tool and uncheck "Selection automatic Layers ' and then hit cmd as a shortcut for the move tool.

• By using the nqcmd command to purge the cache

  Hello
  
  I would like to ask a question,
  
  in OBIEE11G, I need to use the nqcmd command to purge the cache,
  
  in server, I run commond below:
  
  nqcmd d coreapplication_OH1568635987 u weblogic1 s C:\purgecache.txt Pei weblogic
  
  command is following in purgecache.txt:
  call sapurgeallcache()
  
  
  It's ok in the server,
  
  now, I want to run this command at another machine, as I want to use informatica to invoke this how to purge the cache at the time.
  
  How to do?
  Thank you in advance!

  Assume that the column name is etl_end_time

  Agents can be controlled using reports (analysis in 11 g). There is a tab Condition while creating agents that can be used to control the agents according to the report.

  Lets say u create a false report. In what you put a dummy column. In the Edit Form dialog box, use the TIMESTAMPDIFF function to compare your etl_end_time and current_time.

  Lets say you set the TIMESTAMPDIFF function returns the difference in minutes. Then create a filter on this column with operator greater than or equal to and the value that say 1 minute (it's your choice)

  If this report now returns true when the difference between timestamps is greater than 1 minute (which means that it will become true 1 minute after the etl is complete). Then assume that you configure the agent to check the status of all the 1 minute at a time given when the agent is running, the report returns true and agent is triggered

  This officer will then call you purge command

  Of course, you can add another filter to the fake report as less than or equal to 5 minutes because the difference of the timestamp of the current time and the previous etl also runs will be greater than 1 minute ;) To make sure only the latest time end etl is used, you can add a second filter as has just said.

  Phew... hope so :) I made myself clear

• I can't use the patch command. The icon does not appear on th comand bar.

  I can't use the patch command. The icon does not appear on the comand th bar

  Hello!

  Compared to other versions, in CS6 the patch tool is in a different place:

  

  If this does not help, what version of Photoshop are you using?

  Please post back with other questions.

  Janelle

• creation of database using the SQL command * more

  Hello
  
  This isn't a matter of urgency.
  
  I learn the Oracle DBA. I have installed Oracle 9.2 in my windows system. And I'm trying to create a database using the SQL command.
  
  OracleVersion: 9.2
  Windows XP operating system
  
  

  CREATE DATABASE suri
  USER SYS identified by manager
  USER system identified by surendra
  LOGFILE GROUP 1 ('F:\Oracle\oradata\suri\redo01.log') SIZE 100M,
          GROUP 2 ('F:\Oracle\oradata\suri\redo02.log') SIZE 100M,
          GROUP 3 ('F:\Oracle\oradata\suri\redo03.log') SIZE 100M
     MAXLOGFILES 5
     MAXLOGMEMBERS 5
     MAXLOGHISTORY 1
     MAXDATAFILES 100
     MAXINSTANCES 1
     CHARACTER SET US7ASCII
     NATIONAL CHARACTER SET AL16UTF16
  DATAFILE 'F:\Oracle\oradata\suri\system01.dbf' size 200M EXTENT MANAGEMENT LOCAL
  UNDO tablespace undots datafile 'F:\Oracle\oradata\suri\undots01.dbf' size 200M
  DEFAULT TEMPORARY TABLESPACE tempts1 DATAFILE 'F:\Oracle\oradata\suri\temp01.dbf' SIZE 100M EXTENT MANAGEMENT LOCAL

  I get the error like below when executing the CREATE DATABASE command.
  
  

  ERROR at line 16:
  ORA-25139: invalid option for CREATE TEMPORARY TABLESPACE

  I have validated the syntax but not able to find where is the error.
  
  Please let me know if you need more details.
  
  Thanks in advance for your help.
  
  
  Kind regards
  Suri

  OracleVersion: 9.2

  Why a so old version (and desupported)? In any case...

  TEMPORARY TABLESPACE tempts1 DATAFILE 'F:\Oracle\oradata\suri\temp01.dbf' SIZE 100 M EXTENT MANAGEMENT LOCAL default

  .. try change DATAFILE with TEMPFILE.