Gray of network

Similar Questions

• Wireless use USB ports locks and prevents the Windows shut down

  Hi all. Faced with this one.

  Computer is the laptop, HP Pavilion DM4 - 1150ca. 4 GB of Ram, 150 GB HD

  OS Win 7 Home Premium 64-bit, SP1 and latest updates installed

  Problem: I have 3 ways to connect to the internet: 1 Dongle USB (Device Manager calls "Remote NDIS based internet device for sharing". No problem connecting to the network and to the internet with this device. 2. built in WiFi adapter, "Intel Centrino Wireless - N 1000 and 3. External antenna for high power USB and USB «Realtek RTL8187» adapter Medium 1 and 2, I can normally connect to the network, get decent speed but he declines quickly and then to a random period, usually within a few minutes, I lose my internet connection, and finally my network shows disconnect icon. At this stage all 3 of my USB ports are locked up, removal of the WiFi device does nothing, don't disconnect sound and no USB device is recognized if I try their connection. In addition, Windows will not stop. I get a "shutting down" screen but it stays that way until the expiration time and finally restarts, screen asking if I want to start normally or in safe mode.

  Action taken:

  Several online sites checked and tried solutions including:

  RTL8187 uninstalled and reinstalled several times

  Uninstalled and reinstalled HP wireless several times

  Deleted (Device Manager, see all) entries while grayed, unused network

  So far, no joy, no change. Anyone have any new ideas? Thanks for any help

  Hi Raven,

  Do you have third-party security programs installed on the computer?

  Basically, if the internet works in safe mode and not works in normal mode, not applications or third-party security programs can be in conflict with the drivers from the internet.

  As a solution, I suggest to uninstall the anti-virus program and check if it works in normal mode.

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Answer with the results so that we can help you even the question.

• iPhone 4 iOS 9.3.2 | Wi - Fi is not grayed out, but available networks cannot be detected!

  Features: iPhone 4S 64GB | 9.3.2 iOS (13F69) | Greece

  Hello team Apple, I'm Athanasios * Thessaloniki! I want to tell you about my problem which is this a while now, and I can't find a useful answer.

  We will explain my problem:

  Suddenly, one day, after I have updated to iOS to 9.2.1 version, wi - fi was not able to detect ANY network, which has been previously connected successfully. I already searched Google my problem in the forums of geek famous Apple, Apple support page (Yes, here), YouTube, but a solution absolutely nothing for her. As the Wi - Fi connection button was not gray, I assumed that it wouldn't show the antenna, such as moving after falling or something similar. I have never had any problem of high or low, such as the iPhone, not too hot or too cold. I tried to reset the network, put on the market settings and disable certain services that have been proposed to do in the forums, in many combinations different by trial and error-n method and even restored the iPhone throughout the system by default, and still nothing is resolved. I double checked the routers themselves, their settings and everything. All other devices are connected, with the exception of my iPhone (because cannot detect it). IPhone of my father (it's the same as mine) is also connected. BUT, as I said before, my iPhone cannot DETECT wifi networks.

  According to some scholars, put my iPhone in the refrigerator for 30 minutes and getting Wi - Fi working again, IS NOT a SOLUTION for me, because I don't know what could happen to the chips inside. In general, I do many reflow repairs to chips in laptops (made with success, of course), but this... I refuse to do it for a reason any.

  This is why I installed Apple Configurator 2, follow the steps below and save the file log and no information, it could be exported from the application. I don't know what else to do. Please if you could tell me what the log file (if the reason lies deep inside the info), as long as you or me to find a solution. I can't determine if it comes to iOS, or material. Even now, on the last version of iOS, the problem is not resolved.

  A VERY BIG THANK YOU FOR YOUR PATIENCE. PLEASE SEE WHAT YOU CAN DO. AN IDEA DIRECTLY FROM YOU WOULD BE USEFUL.

  ========================

  Steps, what is in the .log file is:

  1. turn off: Wi - Fi

  Bluetooth

  Use of data

  Activation: Flight Mode

  (in general, everything is turned off)

  2. TURN OFF THE PHONE

  3. TURN ON THE PHONE

  4 turn on: Wi - Fi, and Bluetooth, flight mode (off... dial-up cellular is enabled), use of data

  ========================

  PS: Here is the link of my log file (I have downloaded on my Dropbox account)

  < personal information under the direction of the host >

  Hi, this is a user to user forum only. I read your post and offer two comments. Please do not put your phone in the refrigerator, which is not an accepted solution. Secondly, iPhones are not intended to be served by our users. I know you've tried several of the steps below but please take a look at them again. If after #8 (restoration of new, not backup) the phone still does not work, your best choice would be to take on Apple Store or authorized dealer for evaluation.

  Suggest from the top and bottom. Maybe one of them will help you.

  (1) perform a forced reboot: hold the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears. Leave the device to reboot.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth).

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes (ask for more details if you wish).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple Store for the evaluation of the material.

  Council: https://discussions.apple.com/docs/DOC-9892

• Gray network ID cannot join F10 to the domain

  Well, I am a network support analyst for a living, so I know not how to attach and remove the PC and laptop computers of a domain. I have a Qosmio F10 that comes with having the BONE restored from the Original Recovery CD ROM product The network card is very good and its got an IP address, if someone can tell me why when you right-click Select Workstation properties, click on the name of the computer the network ID option is grayed out. If you click on edit the domain area is grayed out so impossible to type the domain name. Why. I uninstalled the client for MS Networks and re-installed and it's the same thing! Its driving me crazy.

  Hi Imsai

  Please contact your network administrator and believe me it can help you. As I know it is not possible to make changes if you have no right to domain administrator.

  Good luck!

• Try to create a new VPN connection but Creat new network connection is grayed out

  Hello world

  Thank you for your help in advance.

  I would like to ask why I could not create a new VPN connection as the "Creat new network connection" is grayed out. I'm also sure that remote access connection manager, and another car once are started.

  I can create an account with my domain administrator account. But once I passed the orginary user, the shortcut to the connection could not be accessed. I also tried to add the user to the local Administrators group, and the result is the same.

  HOEP that you can help.

  Thank you.

  Windows XP Service Pack 3?

  Do you have any software security 3rd party running on this computer?  Or maybe something in group policy that limits access to create a new network connection?

  -B-
  http://www.officeforlawyers.com | http://www.OneNote-tips.com
  Author: Guide to counsel for Microsoft Outlook

• How can I display characters in 'Wireless Network Connection' - &#62; 'Properties' when the checkbox "show characters" is grayed out?

  How to display hidden characters in the Properties tab, in the connection, that I am using, under the wireless network connection box when that I should be able to check box is greyed out and unclickable?

  Also NOTE: When you try to use ctrl-p method, a ctrl-v, at the point where you click the box of characters on that he blanks.

  Hello

  You are connected to a domain?

  If the show characters check box is grayed out, the network, or the computer may be restricted by a group or local policy.

  If this computer is connected to a working network, I suggest you contact your help desk or IT Department.

  Concerning

• I seem to be impossible to add network and volume icons in the notification area. Both are "grayed out" in the Properties tab.

  I seem to be impossible to add network and volume icons in the notification area.  Both are "grayed out" in the Properties tab.

  Hello

  1 Please reboot nothing so interfere with this process.

  Click with the right button on Taskbar - Properties - tab Notification area - check box Volume - if it is grayed out
  Then, use this link. Network is the same.

  How to enable or disable the system tray in Vista icons (there are several methods
  and you can to use them all).
  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

  If necessary: a Mr Fixit

  System icons do not appear in the notification area in Windows Vista or in Windows 7 until you
  Restart the computer
  http://support.Microsoft.com/default.aspx/KB/945011

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Options grayed out after that migration vSwitch0 vmk0 to distributed network switch

  I have a bunch of ESXi 6 guests, where I would like the default vSwitch0 to a vDS management interface. However, it seems that the management network gets screwed more or less of this operation

  First I tried to simply migrate the physical interface and vmkernel to vds = no chance (resets the form configuration time to hosts)

  Then I tried to connect a NIC seconday to the same switch, adding as a management console interface, make two interfaces marked as management interfaces. The uplink of vSwitch0 is replaced by the new interface and the vds is mapped to the original management interface. From this point, I can migrate vmk0 to the distributed switch and remove the extra card. All good, at least at first glance. The army continues to communicate with vCenter and so on. However, return to the console options to "Network adapters" and "VLANS (optional)" are grayed out. The only way I managed to get back them is again a reset to the default settings of the management network.

  After som test front and rear, it seems that these options disappear as soon as vm0 leaves vSwitch0?

  Any ideas how to solve this problem?

  The army continues to communicate with vCenter and so on. However, back to the console options for "Network adapters" and "VLANS (optional)" are grayed out. The only way I managed to get back them is again a reset to the default settings of the management network.

  I guess that's the expected behavior, because once your vmk0 has been migrated to vDS, now the vDS control plan which is with vCenter server will allow you to change these settings as network card and VLAN ID etc.

• VDC organization network is grayed out &amp; rents.

  Trying to create a Organization in vCloud 5.5 VDC network applicance. But creating the network organization vDC is grayed out. I can only create a network of vApp.

  No idea why I can't create a magnificent vDC organization network network?

  &

  If I want to create a paralytic with unlimited rental period. Where can I do this, if possible. :-)

  Org vDC networks are a component of the VCC Org, who is only seen in the Administration > Org vDC > double-click the org vdc > Org vDC networks

  You can create them under "My Cloud" when you provision a paralytic.  When you provision a paralytic, you can link the new TIME to an organization existing vDC network.

• Configure the network management grayed out in DCUI

  Configure the network management grayed out in DCUI and some other options are grayed out and network management IP is 0.0.0.0

  Seems that you have not any management VMkernel port or they may have been removed. You may need to check the same.

  Run esxcli list of network ip interface to check if there is no VMKernels.

  It does not generate re no output if NO vmkernel port is available.

  If no. VMkernel ports then follow the below to re-create the management VMkernel port group.

  esxcli network ip interface add-i = vmk0 Pei = "network management - M = 'MAC address' ' to create a VMKernel for management." Make sure the right to MAC address of the uplink is mentioned.

  And make sure that it is a unique vmk, does not correspond to a vmk existing (vmk0, vmk1, vmk2).

  Once the Port is created, you should be able to configure networking on the DCUI

  Hope it will be useful.

• Re: Network icon grayed out in the taskbar

  For some reason when if I right click on the taskbar and select Properties - turn system icons on and outside-, the network icon is greyed out...

  How can I activate it?

  What I've tried so far:
  -Local Group Policy Editor
  -Change the reg file

  Details of what I tried:
  http://www.SevenForums.com/tutorials/19085-system-icons-enable-disable.html

  I have Win 8.1 and in my case, I can enable and disable this network icon in the taskbar to aid after workaround:

  Right click on the taskbar-> properties.
  In the task bar, tab click on customize in the notification area
  Now, click on the icons in the system market turn / stop
  Now choose and switch the network-> behavior option WE

• Gray of WIFI on home network

  Hello

  I have problems to connect to my home network. Wifi phones turns well, gets an IP address and looks perfect. However, grey wifi strength meter and phone outside and there is no connectivity to the internet on the phone. The wireless network is protected from WPA.

  The phone has worked well on a different network, unprotected, I found in the street.

  I have a cliq which works very well on my network.

  I tried to turn off and turn off airplane mode, neither of which make a difference.

  Any ideas?

  Thank you

  @biosudds

  Have you tried your router powered off and then try to connect again?

  And 2 x and 3 x check your password

• Backup "to a network' grayed out for Windows Vista Home Basic Edition

  Dear Forum:

  Vista Home Basic SP - 2, Win XP Pro Service Pack 3 (signed on as "Administrator" on both machines)

  I'm trying to back up data residing on Vista Home Basic machine on a shared drive on Win XP Pro machine on an ethernet network.  When I run backup and restore Vista HB machine, backup "to a network' option remains greyed out.

  From now on, I can read and write in the public records of the Vista machine from the Win XP Pro machine and I can read and write to disk shared Win XP Pro machine from Vista HB machine.

  I apologize if the question has been discussed previously.  I appreciate all help to address this issue.

  -Kevin N

  I'm sorry, but Windows Vista Basic cannot save to a network location.  It can only back up to a local disk.

  Backup to a network location requires a more advanced version of Windows Vista.

  Boulder computer Maven
  Most Microsoft Valuable Professional

• Icons of network system and the sound disappeared and are grayed out in the menu

  Until recently the icons for my wireless network connection and my sound have diasppeared since the icons in my toolbar in my office.  I tried stuff with regedit, I even tried reinstalling sound driver to see if it works before making network and it didn't.  I tried most of the solutions that were on a previous thread with the same question, but nothing works the icons are still unable to control.  All solutions?

  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

  Read the tutorial above and see if that helps disabled of choice.

  See you soon.

  Mick Murphy - Microsoft partner

• Virtual network and switch Option grayed out?

  I have two hosts on my environment, clustered. Web client (using Vsphere 5.5), I choose a host-> manage-> virtual switches, but all the options are greyed out (add host network, refresh the network hosts, manage physical network cards, etc.). I go to another host and choose the same thing, and these options are available. I don't know why this is happening? I have googled around, but can't find anything useful.

  You can do it in vSphere Client Host? Sometimes the Web client takes forever to load the icons change to the virtual switches.

  Maybe you should give the vCenter, a little more RAM and the Java process Web client as well.

  See a good explanation on how to increase Java memory for customer Web here: Improve vSphere Web Client Performance. Tom Fojta & #039; s Blog