Great value plugin region alignment with different positions

Similar Questions

• To attach the same position with different jobs and organization

  Hello
  
  I have a question, is it possible to attach the same with different position of work and organization.
  
  
  Thanks in advance

  I'm not completely sure what you're asking here. A position is limited to a job and an organization, and this post work and the organization can never be changed. If you want to change the work or the Organization on a post, you must create a new post that is a copy of the former with the update of work or organization.

  When you're picking this position in the form of missions that are assigned by default in the Organization and work on the allocation of the position. Similarly, if you already entered work and org on the transfer you can choose only the positions that match this org and employment.

  Who is?

• loop to generate variables with different values

  A quiz, I have answers user saved in a table. At the end of the quiz, I need to extract individual responses to the different variables q1, q2, q3, etc.. The questionnaire can be of different questions so I need to adjust based on total questions inside. How can I use loop to create variables and values to capture?

  So, I would change the following:

  var q1:int = userAnswersArray [0];

  var q2:int = userAnswersArray [1];

  var q3:int = userAnswersArray [2];

  var q4:int = userAnswersArray [3];

  ...

  to the loop like the one below:

  for (i = 0; i < totalQuestion-1; i ++)

  {

  This ["var var q" + i] + ": int" = "userAnswersArray []" + this [i] + "]";

  }

  He probably has syntax errors that it does not work.

  Thanks for your help.

  If evidence of userAnswersArray are always aligned with issue numbers (say, question 1 answer is saved in 0, 2 - position 1, position etc.) maybe work the following:

  var urlreq:URLRequest = new URLRequest("subresultpage.asp");
  urlreq.method = URLRequestMethod.POST;
  var urlvars:URLVariables = new URLVariables();
  for(var i:int = 0; i < userAnswersArray.length; i++) {
    urlvars["q" + (i + 1)] = userAnswersArray[i];
  }
  

• Alignment of thread with different screen resolutions

  I noticed that block diagram wire positions/alignments can change, sometimes significantly, by switching to screens with different resolutions.  There is a ton of information on the maintenance of the proportions on the front panel as the solution of problems, but I can't find how to mitigate the problem with the wires on the block diagram.  Does anyone know how to best handle this?

  Thank you!

  crossrulz wrote:

  I never noticed the block schema change due to screen resolutions.  I saw this kinds of problems during the change of system fonts.  For example, switching from XP to Win7 meant go to police Aero, which is a font more great than XP used to its default system font.

  That's what I noticed as well.

  The solution is to set the blockdiagram fonts in the LabVIEW.ini be specific font rather than a system font.

  Something like

  BDFont = "Tahoma" 13

• SQL to align the values of the child with the parent columns

  Hello world

  I'm stumped on how to develop a sql query that generates a report which my child values are aligned with my columns parent based on corresponding years.  Here is an example...

  create table test_yr (yr_id number primary key, yr_nb number);
  insert into test_yr values (1,2013);
  insert into test_yr values (2,2014);
  insert into test_yr values (3,2015);
  
  create table test_parent (parent_id number primary key, parent_yr_id_begin number, parent_title varchar2(100));
  alter table test_parent add foreign key (parent_yr_id_begin) refererences test_yr (yr_id);
  insert into test_parent values (1,1,'This rec starts in 2013');
  
  create table test_child (
       child_id number primary key,
       child_parent_id number,
       child_yr_id_begin number,
       child_title varchar2(100),
       child_yr1_val number, child_yr2_val number, child_yr3_val number, child_yr4_val number, child_yr5_val number
  );
  alter table test_child add foreign key (child_parent_id) references test_parent (parent_id);
  alter table test_child add foreign key (child_yr_id_begin) references test_yr (yr_id);
  insert into test_child values (1,1,3,'This rec starts in 2015',10,20,30,40,50);
  insert into test_child values (2,1,3,'This rec starts in 2015',15,25,35,45,55);
  
  
  

  The child can begin to another to start the year as the parent, which makes different yr1 for parent and yr1 for child.  So, for this example, the child 1 year (2015) = year 3 of the parent.

  I can get the values strictly of the child using the following...

  select child_yr1_val, child_yr2_val, child_yr3_val, child_yr4_val, child_yr5_val
  from test_child
  where child_parent_id = 1;
  
  

  However, I need the report to be based on the first five years of the parent.  And since the child does not start until 2015, two years should be zero.  This is the expected result:

  Yr1 | YR2 | YR3 | yr4 | Yr5

  ---------------------------

  0   | 0   | 10. 20. 30

  0   | 0   | 15. 25. 35

  I am doing it using simple sql without having to use pl/SQL to derive a dynamic query.  But I need to somehow to the height and line up the years... like in this example, yr1 (child) = yr3 (parent), (child) yr2 = yr4 (parent), etc..  I hope that some joints and case statements will do the trick, but I don't know how to use them to get the result that I need.  Can anyone help?  Oracle 11 g 2.

  Thank you

  Mark

  Hi, Mark,.

  Here's one way:

  WITH unpivoted_child AS

  (

  SELECT child_id, child_parent_id

  child_yr_id_begin + child_yr - 1 AS column_num

  val

  OF test_child

  UNPIVOT (val

  FOR child_yr (child_yr1_val AS 1

  child_yr2_val AS 2

  child_yr3_val AS 3

  child_yr4_val AS 4

  child_yr5_val AS 5

  )

  )

  WHERE child_parent_id = 1

  )

  SELECT NVL (y1, 0) AS yr1

  , NVL (y2, 0) AS yr2

  , NVL (y3, 0) AS an3

  , NVL (y4, 0) AS yr4

  , NVL (y5, 0) AS yr5

  Of unpivoted_child

  PIVOT (SUM (val)

  FOR column_num IN (1 AS y1

  2 AS y2

  3 AS y3

  4 AS y4

  5 AS y5

  )

  )

  ORDER BY child_parent_id

  child_id

  ;

  Have 5 columns in the test_child that all say the same thing, obly for different years, isn't a very good design table.  It wouyld be better to have a single table for all the attriburtes that apply to the child and another table for each combination of year, with a single amount on each line.  Because you don't have that, the unpivoted_child of the subquery, it essentially creates on the fly.

• two rows of delete with different values

  Hello
  
  I wouldn't lines with the same id and have values of E and F 10258932.
  
  I would like the following data:
  

  A        B  C      D     E N
  -------- -- ------ ----- - -
  10258927 1  103,35 0
  10258929 3  284,85 89,52 E N
  10258929 4  323,85 89,52 E N
  10258930 5  478,80 91,53 E N
  10258931 6  436,67 78,09 E N

  But I have the following lines:
  

  SQL> with my_table as
    2  (
    3  select '10258927' a, '1'  b, '103,35'  c, '0'      d,   NULL  e from dual union all    
    4  select '10258928' a, '2'  b, '0'       c, '15,19'  d,  'E'    e from dual union all
    5  select '10258929' a, '3'  b, '284,85'  c, '89,52'  d,  'E'    e from dual union all
    6  select '10258929' a, '4'  b, '323,85'  c, '89,52'  d,  'E'    e from dual union all
    7  select '10258930' a, '5'  b, '478,80'  c, '91,53'  d,  'E'    e from dual union all
    8  select '10258931' a, '6'  b, '436,67'  c, '78,09'  d,  'E'    e from dual union all
    9  select '10258932' a, '7'  b, '784,88'  c, '23,19'  d,  'E'    e from dual union all
   10  select '10258932' a, '8'  b, '100,88'  c, '11,11'  d,  'E'    e from dual union all
   11  select '10258932' a, '9'  b, '300,88'  c, '22,22'  d,  'F'    e from dual union all
   12  select '10258932' a, '10' b, '468,25'  c, '78,33'  d,  'F'    e from dual)
   13  select a, b, c, d, e, no_ds from
   14  (
   15    select a, b, c, d, e,
   16           case when c > 0 and e != 'F'
   17                then 'N'
   18           end no_ds
   19    from my_table)
   20  where no_ds = 'N' or e is null
   21  order by 1
   22  /
  
  A        B  C      D     E N
  -------- -- ------ ----- - -
  10258927 1  103,35 0
  10258929 3  284,85 89,52 E N
  10258929 4  323,85 89,52 E N
  10258930 5  478,80 91,53 E N
  10258931 6  436,67 78,09 E N
  10258932 7  784,88 23,19 E N
  10258932 8  100,88 11,11 E N
  
  7 Zeilen ausgewählt.
  
  SQL> 

  Does anyone have an idea?

  Oh, I read the title again once: 'remove double lines with different values.
  If it means that he is not specifically E and F values, but only if there is more than one distinct value, then you can do the following:

  with my_table as
  (
  select '10258927' a, '1'  b, '103,35'  c, '0'      d,   NULL  e from dual union all
  select '10258928' a, '2'  b, '0'       c, '15,19'  d,  'E'    e from dual union all
  select '10258929' a, '3'  b, '284,85'  c, '89,52'  d,  'E'    e from dual union all
  select '10258929' a, '4'  b, '323,85'  c, '89,52'  d,  'E'    e from dual union all
  select '10258930' a, '5'  b, '478,80'  c, '91,53'  d,  'E'    e from dual union all
  select '10258931' a, '6'  b, '436,67'  c, '78,09'  d,  'E'    e from dual union all
  select '10258932' a, '7'  b, '784,88'  c, '23,19'  d,  'E'    e from dual union all
  select '10258932' a, '8'  b, '100,88'  c, '11,11'  d,  'E'    e from dual union all
  select '10258932' a, '9'  b, '300,88'  c, '22,22'  d,  'F'    e from dual union all
  select '10258932' a, '10' b, '468,25'  c, '78,33'  d,  'F'    e from dual
  )
  --
  -- end-of-test-data
  --
  select a, b, c, d, e,
         num_distinct_values
  from
  (
    select a, b, c, d, e,
           count(distinct e) over (partition by a) num_distinct_values
    from my_table)
  where num_distinct_values <= 1
  order by 1
  / 
  

  The county notes how the distinct non-null values in column e for each one.
  Where clause then selects those with count = 0 (this is where e = null) and count = 1.
  If the number is greater than 1, different values exist for this id.

  Choose what fits your condition ;-)

• DAQmx create track (I-current-Basic) 8 channels with different values of Shunt resistance

  Hello

  I want to measure 8 current channels with different values of Shunt resistance.

  Problem: The channel create DAQmx (HAVE current Basic) specifies that a value of Shunt resistance.

  How can I set the value of Shunt resistance for each channel individually?

  Concerning

  Marcel

  Hi Marcel_C,

  Take a look to get attached.

  Best regards

  Mencef

• Text prediction with different regional settings in Windows 7 - shows disabled in Korean

  prediction of title: original text with different regional settings in Windows 7

  Hello

  I have English as the main language and Korean as a language second.  Text prediction works very well with this configuration; However, if I change the regional settings (non-Unicode) in Korean, text prediction is disabled.

  There is no work around for this?

  Thank you.

  Michael

  Hello

  • Text prediction is only available in English, French, Italian, German and Spanish. To enable text prediction in a specific language, you must first install additional language files for that language. For more information, see install or change a display language.

  • Text prediction is not included in Windows 7 Home Basic Edition.

• Mr President, how can I enter two rows at the same time with different default values that only the first line to use see?

  Mr President.

  My worm jdev is 12.2.1

  How to enter two rows at the same time with different default values that only the first line to use see?

  Suppose I have a table with four fields as below

  "DEBIT" VARCHAR2(7) , 
    "DRNAME" VARCHAR2(50),
    "CREDIT" VARCHAR2(7) , 
    "CRNAME" VARCHAR2(50),
  

  Now I want that when I click on a button (create an insert) to create the first line with the default values below

  

  So if I click on the button and then validate the second row with different values is also inserted on commit.

  The value of the second row are like the picture below

  

  But the second row should be invisible. It could be achieved by adding vc in the vo.

  The difficult part in my question is therefore, to add the second row with the new default values.

  Because I already added default values in the first row.

  Now how to add second time default values.

  Concerning

  Mr President

  I change the code given by expensive Sameh Nassar and get my results.

  Thanks once again dear Sameh Nassar .

  My code to get my goal is

  First line of code is

      protected void doDML(int operation, TransactionEvent e) {    
  
          if(operation != DML_DELETE)
               {
                   setAmount(getPurqty().multiply(getUnitpurprice()));
               } 
  
          if (operation == DML_INSERT )
                     {
                             System.out.println("I am in Insert with vid= " + getVid());
                         insertSecondRowInDatabase(getVid(),getLineitem(),"6010010","SALES TAX PAYABLE",
                          (getPurqty().multiply(getUnitpurprice()).multiply(getStaxrate())).divide(100));      
  
                         }
  
          if(operation == DML_UPDATE)
                            {                                                    
  
                               System.out.println("I am in Update with vid= " + getVid());
                           updateSecondRowInDatabase(getVid(),
                               (getPurqty().multiply(getUnitpurprice()).multiply(getStaxrate())).divide(100));      
  
                            }                      
  
          super.doDML(operation, e);
      }
      private void insertSecondRowInDatabase(Object value1, Object value2, Object value3, Object value4, Object value5)
                {
                  PreparedStatement stat = null;
                  try
                  {
                    String sql = "Insert into vdet (VID,LINEITEM,DEBIT,DRNAME,AMOUNT) values " +
               "('" + value1 + "','" + value2 + "','" + value3 + "','" + value4 + "','" + value5 + "')";  
  
                    stat = getDBTransaction().createPreparedStatement(sql, 1);
                    stat.executeUpdate();
                  }
                  catch (Exception e)
                  {
                    e.printStackTrace();
                  }
                  finally
                  {
                    try
                    {
                      stat.close();
                    }
                    catch (Exception e)
                    {
                      e.printStackTrace();
                    }
                  }
                }  
  
                private void updateSecondRowInDatabase(Object value1, Object value5)
                {
                  PreparedStatement stat = null;
                  try
                  {
                    String sql = "update vdet set  AMOUNT='"+ value5+"' where VID='" + value1 + "'";                     
  
                    stat = getDBTransaction().createPreparedStatement(sql, 1);  
  
                    stat.executeUpdate();
                  }
                  catch (Exception e)
                  {
                    e.printStackTrace();
                  }
                  finally
                  {
                    try
                    {
                      stat.close();
                    }
                    catch (Exception e)
                    {
                      e.printStackTrace();
                    }
                  }                  
  
                }
  

  Second line code is inside a bean method

      public void addNewPurchaseVoucher(ActionEvent actionEvent) {
          // Add event code here...
  
          BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
                 DCIteratorBinding dciter = (DCIteratorBinding) bindings.get("VoucherView1Iterator");
                 RowSetIterator rsi = dciter.getRowSetIterator();
                 Row lastRow = rsi.last();
                 int lastRowIndex = rsi.getRangeIndexOf(lastRow);
                 Row newRow = rsi.createRow();
                 newRow.setNewRowState(Row.STATUS_NEW);
                 rsi.insertRowAtRangeIndex(lastRowIndex +1, newRow);
                 rsi.setCurrentRow(newRow);
  
                 BindingContainer bindings1 = BindingContext.getCurrent().getCurrentBindingsEntry();
                 DCIteratorBinding dciter1 = (DCIteratorBinding) bindings1.get("VdetView1Iterator");
                 RowSetIterator rsi1 = dciter1.getRowSetIterator();
                 Row lastRow1 = rsi1.last();
                 int lastRowIndex1 = rsi1.getRangeIndexOf(lastRow1);
                 Row newRow1 = rsi1.createRow();
                 newRow1.setNewRowState(Row.STATUS_NEW);
                 rsi1.insertRowAtRangeIndex(lastRowIndex1 +1, newRow1);
                 rsi1.setCurrentRow(newRow1);
      }
  

  And final saveUpdate method is

      public void saveUpdateButton(ActionEvent actionEvent) {
          // Add event code here...
  
          BindingContainer bindingsBC = BindingContext.getCurrent().getCurrentBindingsEntry();      
  
                 OperationBinding commit = bindingsBC.getOperationBinding("Commit");
                 commit.execute(); 
  
          OperationBinding operationBinding = BindingContext.getCurrent().getCurrentBindingsEntry().getOperationBinding("Commit");
          operationBinding.execute();
          DCIteratorBinding iter = (DCIteratorBinding) BindingContext.getCurrent().getCurrentBindingsEntry().get("VdetView1Iterator");// write iterator name from pageDef.
          iter.getViewObject().executeQuery();  
  
      }
  

  Thanks for all the cooperation to obtain the desired results.

  Concerning

• Two tables with different values of basic on an analysis filter

  Hi guys,.
  
  Let assume that I have an analysis with columns: group_id and sales.
  On this basis I would like to create two tables: table1 where group_id = 1 and table2 where group_id = 2.
  
  OBIEE is able to do?
  
  Kind regards
  Slavi

  Hi Slavi,

  You can do it in a single analysis, but you have to have the column with group_id twice.

  Bring, group_id_1, group_id_2 (same column), sale

  Now in table 1.

  bring group_id_1, sales

  Then in the selection steps for group_id_1-> select members-> Action choose keep only-> choose the value of the filter 1

  This will filter the table 1 with group_id 1

  In table2 group_id_2 porter, sales

  Then do the same step for group_id_2 with the value 2.

  You now have two reports with different filter in the same report.

  If you want you can keep the same name column for the two columns group_id, I just kept group_id_1, group_id_2 for easy reference.

• reuse of filters with different values

  We have a usage scenario where the same filters will have to be applied several times with different values. Looking the javadocs, it seems like there is no way to change the values of pre-packaged filters (EqualsFilter, GreaterFilter etc.). Is that correct or is there a way to do it? I see that if we use CohQL, we can use bind variables to do this. However, the use cases we should rather just more complex extractors ReflectionFilters.
  
  In addition, there no performance impact by using CohQL against java constructs directly?
  
  Thank you
  Manju.

  Hi Manju,

  While it is true that you cannot change values in the built in filters, even if you could it wouldn't make you save a lot on the construction of a new filter every time. I guess that if you build a very large number of filters, then you're going to create more garbage, but that shouldn't be a problem either. Some of the more specialized filters also contain State so that you do not want to resuse them.

  The main performance issue I know with CohQL which is only creates extractors of reflection so won't enjoy all serialized POF values you have. If you have indexed each value you want to query on using the same extractors relflection then it would help, but again, this means that everything you deserialization of the values for the query or insert to update the index.

  Kind regards
  JK

• Updated several lines with different values

  Hello!
  I have a problem. I need to update more than 1000 lines with different values. How can I do?
  For exsample I have table:
  ID; color, date,
  1 red
  2 green
  3 white
  
  I need to update the date field.
  
  Update table
  Set date = '01.02.03'
  where id = 1
  
  Update table
  Set date = '01.03.03'
  where id = 2
  
  
  Maybe it's how to update multiple rows in a single request?
  
  Sorry for my bad English.
  Thank you!

  Hello

  You can try this

  UPDATE TABLE SET DATE = CASE
                      WHEN ID = 1 THEN TO_DATE('01-02-03','DD-MM-RR')
                      WHEN ID = 2 THEN TO_DATE('01-03-03','DD-MM-RR')
                      END
  

  see you soon

  VT

• Show regions in a different area on a page (jsff or jspx)

  Hi all

  I have a requirement where I need to display several taskflows as a region in different places in a page (jsff or jspx). Let's say I have three taskflows dropped as a region (for for example, region1, region.2, elle3) I view on a page and assume that the regions should be at 3 different positions (for eg., position 1, position2, poste3) on the page. The requirement is to display regions to the dynamically specified locations.

  For example,.

  For client A, view region1 position 1, region.2 position2 and elle3 to poste3

  For client B, view region1 position2, region.2 to poste3 and elle3 to position 1

  For customer C, display region1 to poste3, region.2 to position 1 and elle3 at position2

  I wonder how I can achieve this. If anyone could be kind enough to shed some light and explain how I can achieve this?

  Thank you

  Mahesh

  No, the link does not solve this problem.

  When you drop a region on a page as a dynamic reason, a bean is created that contains the path of the region to show. Regions more you drop on a page the mute these URLs are stored in the bean. You're playing with dynamic regions see you how the bean method are used to switch regions on a page. Then you implement the code to calculate the area to introduce and define the right url. See https://blogs.oracle.com/shay/entry/adf_dynamic_regions_switching_just and Articles Oracle: back Bean of switching to dynamic region | Oracle ADF

  Timo

• When I create two keyframes at the same position between keyframes at different positions this way adds a loop. How can I get rid of the loop?

  When I create two keyframes at the same position between keyframes at different positions this way adds a loop. How can I get rid of the loop? I was just by dragging the handles on the vertex point, but I want to get rid of the loop together.

  Focus on the Bezier handles on the motion path in the Composition window. You can select the tool pen (g) and hold down the Alt/Option key to select the tool convert Vertex (it looks like a V on the side) and then fix the handle manually or click on the top of the trajectory to change it to a straight line. You can also play with spatial interpretation Keyframe.

  To avoid this, you can change the interpolation of keyframes in space to linear preferences. Most of the time I don't like straight so I keep my default value of Bézier.

• An imported image CMYK values do not match with CMYK in Illustrator

  Hello everyone. I made a simple poster using photoshop to make the background and Illustrator to make fonts and some other stuff.

  In CMYK mode, my black is only 100% K (in photoshop)

  When you place the image in illustrator the 100% K (black) turns black different with C M Y added. But then when I save it as a PDF preview shows black as a little gray (which is something normal - in the press, it will be only in black). So my question is, should I change enything out to see a 100% K in illustrator to match values CMYK in Photoshop? Or should I leave it this way? I guess if I get a 'grey' in the preview PDF's something good huh? because in photoshop, when I got to 100 %K in my screen it looks like gray and black total no.

  OK, so you have used the pipette to measure black. It was not clear in your initial post.

  You can take an accurate measurement with the eyedropper in related photos. It is simply not possible. sampling of colors with the SHIFT key will always taste the representation on the screen, i.e. through color management.

  If you want to check colors, create a PDF file and then use Adobe Acrobat.

  When the incorporation of your linked images, you must take care of the color management to prevent CMYK-to-CMYK-transformations. You need to check the color profiles and you must correctly configure the color management. Which of the courses apllies to save a PDF file as well.

  There is a great document on prdouction impression with Creative Suite, you can read: http://rufus.deuchler.net/2011/06/adobe-publishes-a-new-creative-suite-555-printing-guide. html