Re-install problem/question

Similar Questions

• Droid wired headset problem/Question

  Hello

  Anyone else have a problem with the volume being really quiet or silent call on wired headset plugged on Droid?

  The 3.5 mm jack seems to work in music mode very well. I can hear MP3s sound level expected, however, when in call volume helmet falls to zero or almost zero level and cannot be increased. Other callers can hear me (the microphone works) but I do not hear their return or sound extremely tiny.

  I tried with two headphone 3.5 mm to 4 different drivers - iPhone and Blackberry - two I have this problem on appeal and at the same time, both are great for listening to music. I first noticed this problem after 2.0.1 OTA update 2.0 original. Recent update 2.1 has not solved this problem.

  I saw a big bunch of "similar sounding but NOT the same" problem/questions about integrated earpiece does not work once the headset is disconnected. I don't seem to have this problem. The problem I am describing applies to the volume wired headset for calls only.

  Thank you very much!

  If you get it replaced make sure you only change the SD card to the new.  Then, you won't lose any of these data.  You can save all your texts on the SD card with an application called SMS Backup & Restore.  The first time you open Market and tap Menu-> downloads it will show you all of your applications.  Paid and free.  If you leave this same screen so before installing all the they will disappear.  Write all your apps prior would be a good thing to do.  I hope this helps.

• Install CS5 on IMAC problem ['Question']

  I recently bought a new IMAC, I want to download my photoshop CS5 on it, but I can't get beyond the serial numbers, what is it?

  @

  Troubleshoot installation | CS5, CS5.5

• Toshiba ECO utility install problem on NB550D

  Hello world

  I bought a netbook NB550D and upgraded with a stick of 4 GB of RAM and Windows 7 Ultimate x 64. The computer now runs really faster than with the initial Setup, but I have some problems with some software from Toshiba. The ATI graphics driver is installed and the package of added value. But:

  -I'm not able to install the Eco utility. I tried several versions (also dedicated to x 64 OS), but I have to every time the same question during the installation process: installation stops suddenly, and a warning message box appears, but does not have any text contain. After that, the alternation istall is cancelled. Does anyone experience the same problem?
  -J' have also installed the utility Flash Cards, but the bar does not appear when you press the Fn key (shortcut keys work in all cases).

  Would appreciate the help, or the delivery of the driver versions that are suitable for win 7 x 64.

  Thanks in advance!

  Thanks for your comments and share this news!

• Windows Live Essentials (Beta) install problems

  Following the crash of my MSN Messenger (which was after a recommended update; the "Windows Live Essentials")... On the list of recommendations for "problem reports and solution." I read about Windows Live Essentials Beta, which I've tried to install without success. Tried several times, with a variety of error codes, for which the recommendations didn't work.

  Now, a new attempt for the 10th consecutive day, Live Essentials beta installer stops and says:

  "Install Windows Platform Update;

  My Windows updater does not offer such update and couldn't find where and how I could locate and install this update pre-required, before which it seems impossible to install Windows Live Essentials Beta (in fact to reinstall any version of MSN Messenger or Windows Live Essentials). My Windows Update is in automatic mode and constantly keeps downloading all important updates practically at the time of the question.

  Must be very very thankful to your recommendations of the kind!

  Please repost in the forums Live Essentals Installer Portal: http://windowslivehelp.com/product.aspx?productid=12.  The first page includes articles that can help you with your problem.  Otherwise, just go to the forums and post your question here using experts with this product.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• HP Envy 5530 Install problems

  Hi all. I was banging my head against this for a while now and it has left speechless me. All below use the driver available from HP site, 2013-12-12 Version 32.1 full of features and the base driver. The machine itself is a HP G62 Notebook, current updates of windows and HP, running under Windows 7 64-bit. It is reproducible on a second, also HP laptop windows 7 64 bit, on the same network. Identical questions.

  The software is installed normally, and I don't see any problems anywhere until I go to connect to a printer. I can also connect the printer to web front end.

  HP Envy 5530th doesn't let me connect as a printer. I uninstalled the software, reinstalled, used HP doctor to diagnose, which simply downloaded the software again and impossible to install printers. When installing over the network, it gets to half way in the GUI and then abandons. The event viewer contains an MSIInstaller event 1015 | Error: 0x800401F0 when I try this method.

  If I try to connect by USB, the installation fails silently.

  If I try to connect to it as a network printer, such as the use of the connect to printer, windows sees the printer, allows me to choose a driver, I chose the one I grabbed temp Installer files and get this message:

  "The printer driver is not installed. Cannot find a package of basic driver required by the printer driver package. »

  If I try to manually add the driver to the Print Server Manager (so do not connect a printer, just install the driver package) I get another variant of the "printer driver is not installed. Error could not find a package of basic driver required by the printer driver package. "once again.

  Any ideas? SFC/scannow does nothing to the top.

  Workaround. Faulty USB cable. Exchanged for the new printer Cable now works correctly on all fronts. This problem is solved.

• Problems & Questions for the new Win7 ult partition

  I have a few questions and problems at the present time. I got my alienware served 18 for a new HDD and SSD a few hours ago and now I'm stuck with a paperweight 12 lb bulky $ 4000.

  Questions:
  1. when it is initialized from the USB, I get an error "no boot disk.
  2. has been able to install the operating system with the DVD provided with a new partition on the SSD. However, executives don't download and enter a key update my drivers.
  3. just not sure how to proceed with the partitioning of the disks. I guess it's probably the same as my office... but that leads to the questions below.
  4. I saw some guides on the support page, but I have not seen anything with a SSD and HDD configuration.

  Issues related to the:
  1. is there a guide out there, that I can use to reinstall windows to a HDD and SSD costs for a computer laptop alienware?
  2. do I need to manually configure my hard drives for one SSD and HDD format? (I am familiar with putting since I did for my custom desktop computer, but I want to know whether or not this can occur automatically or somehow somewhere?)
  3. is there a guide for question 2?

  This thing has been a puzzle since the first day with random blocks and just want to make it work correctly for once. When you have a deadline, no access to your desktop computer because of the location and a device that blocks around 5 to 20 times in one hour at random... The frustration.

  Thanks in advance. Hope to hear from you guys soon.

  See these guides, one on updating the BIOS contains information about the SATA operation which should answer your #2:

  http://dellwindowsreinstallationguide.com/updating-the-BIOS/

  You are better off installation media of Windows to download 10 TH2 and make a Bootable USB...

  http://dellwindowsreinstallationguide.com/download-Windows-10-OEM-and-retail-ISO/

  See here for details using a disc to boot OS SSD and HDD disk storage:

  http://dellwindowsreinstallationguide.com/a-clean-install-of-Windows-8-1/solid-state-drive-and-hard-drive-configuration/

  Related video tutorials are here:

  https://www.YouTube.com/playlist?list=PL1RkaknDn7v-Ucth4gt0U3BHVSY7oNkWr

• HP Deskjet 3070 (All-in-one/Wireless) install problem Win 7 64

  Hello world

  I wonder if others have had similar problems or ideas on the underside, surely I can't be the only one to use this installation/suffering with this problem.

  Printers: HP Deskjet 3070 All in One (USB/Wifi)

  Operating systems: Windows 7 64-bit (installed absolutely fine on Win 7 32 bit laptop computer connected via wifi).

  Setup: - a Homehub BT, providing WiFi for laptop (Win7 32 bit), a desktop computer (WinXP SP3), the printer has an IP address, which is visible on the home network map - it has a MAC address also. My PC: connected by Ethernet to the homehub which is currently running wifi for all of the foregoing.

  Drivers using downloaded: -.

  + Computer laptop Win 7 32 bits connected via WiFi to the Homehub - installed fine, found printer - this is the stage where the printer receives a configuration intial IP address / completed.

  + WinXP SP3 connected through WiFi to Homhub - as above, correct, opportunity driver found the printer (which, at this time already, there).

  If the printer exists within the network, other computers can see / use it.

  ++ My PC: Win 7 64 bit connected by ETHERNET to Homehub (she does not and will not have a wireless option).

  Downloaded the drivers to install HP. (later tried "Run as Administrator"), select the software components (i.e. Remove feedback/coupons etc), installs OK applications, next step is the configuration of the printer. Add a new printer. "Check network" window appears with the message "Checking network environment" bar and the State. The status bar springs upward but stops dead at the filled Stadium. No possibility to choose whatever it, pressing Cancel has no effect. End of task here generates an error of 'work '. 'devicesetup.exe' stopped The installer never ends, applications are installed, but at no time, it shows the printer/selection.

  I tried many things: complete uninstall "engines", which in this case seem to be the only applications, ensure that all non-essential startup items are disabled, make sure that the firewall is DISABLED (just to be sure), ensure that the anti-virus is disabled there is, in fact, no other printer installed (this computer never had a printer attached to it) make sure file sharing and printing are powered, ensure that there is no TCP/IP/ports printers mapped etc... Still the same error, old or new drivers, always the same - installation does not complete.

  All the doctor diagnostic tools/printing tell me I have to install the driver software (I agree) but direct me to the HP site to download the ones I already have.

  I can't enter the Server Web integrated (the PC where I can't install the drivers, or one of the 2 PC's who have installed correctly). One of them if I click on networking or wireless or advanced it warns a HTTPS connection and then fails with "internal server error".

  My questions to someone kind enough to read this wall of text: -.

  + Anyone has any ideas please? I would prefer not to return the printer as defective because it seems to be a good all-rounder and it works for 2 other PCs in the House, its just mine which does not connect! Sad...

  I'll try the USB installation and then removing the USB-> wireless to see if that can help. I had previously seen articles where people offer to buy a router to 3rd party like that is basically a wifi pass through broadcaster. It is not for me thanks

  Thank you all for reading at least, it's now corrected with slightly reduced functionality.

  Install the USB printer, then DO NOT convert into wireless via HP drivers/installation.

  Change the USB to a TCP/IP port port newly created under the control panel of the printer (windows 7), enter the IP manually to the printer - you want an IP address that will change not in order to make this work - forcing the Home Hub to never provide that the same IP unique to this particular device was the easiest way for me. This connected but showed as offline printer constantly, others may have different experiences.

  To fix that (for me): -.

  Installing the printer in Control Panel Goto, force reinstall drivers HP ("via the drive"). Make sure that all the old files are overwritten. Turn the printer and then turn on (power button - twice if in mode "standby" to disable). Wait until the wireless light will stop flashing and become solid blue. Check in Control Panel if the status is online, if so you are good to go

  As a result of this sabotage, you lose the feature advanced scan for PC etc etc, but the real impression seems to be absolutely perfect. The printer is always available to everyone on the network, etc.

  Good luck to all.

  Alex

• Bench memory not installed - start question

  I have a Pavilion a6242n running Vista Home Premium.  A few months ago, it got to where I had to try several times to get the computer to boot when I turned it on (come to lights and fans on so I decided is was not a power supply problem).  I had to try many times more until he finally wouldn't start at all.  After reading a suggestion in this forum, I decided to remove the RAM sticks one at a time to see if it was my problem.  He initialized right upward when I removed the first stick.  The motherboard has 4 slots for RAM & came with a 512 MB stick in each of the first 2 slots (black) and a stick of 1 GB each of the 2nd 2 slots (blue) for a total of 3 GB.  Realizing that I'd get all the benefits of 4 GB of memory running Vista 32-bit, I always bought 2 sticks of 1 GB (240 pin DDR2, unbuffered PC2 5300 memory) Crucial since it was only $ 5 more than 2-512 sticks. I installed the new clubs in the 1st 2 slots.  Since then, the computer has started occasionally (not every time), but never stays on for more than an hour without a future BSOD.  I tried reseating the memory sticks and move the original 1 GB sticks to the first 2 slots.  At any given time while I move the sticks & them relocation several times, I can smell a burning smell.  Through troubleshooting, I decided that maybe the hard drive was bad, so I replaced that as well.  Since the departure of memory and any sticks I have where the installer has not recognized the first Bank of memory.  He says always "not installed".  Banks of memory 2-4 always show properly 1 GB of memory in each.  I tried to reset the bios by removing and replacing the battery on the MB and reset jumpers.

  My question is this: this machine is able to start properly without the first Bank of memory?  I came to the conclusion that it is bad because it is not recognized not matter what memory is there.  May dispense with the extra memory, I don't know if I should spend more time and money trying to save this machine.  The crack can be repaired or replaced if it is a necessity for appropriate start?  I decided that if the motherboard needs to be replaced, I will buy a new computer.

  Sorry to be too wordy; just try to give as much information as possible, so I can get a precise answer.  Thank you in advance for your help!

  Hello

  In response to your questions, it sounds like the first Bank location memory is dead and it is probably not useful, both financially or in practice, for repair - you would probably find that a new motherboard is cheaper anyway.

  If the computer starts ok without this slot being usable, it might well continue to work for a while yet - I had a PC with a dead memory slot that lasted another 2 years!  However, if it is continually starts giving a BSOD on a regular basis, you would be wise to consider a new PC.

  I hope this helps.

  Best wishes and good luck,

  DP - K

• Silverlight has install problem-64 bit PC with win7 32 OS installed

  Trying to help a friend with Silverlight.  She has a portable 64-bit with Win 7 32 installed on it.  Websites with Silverlight request installed Silverlight even if it is installed.  I did a number of installs / uninstalls.

  I removed the registry and suggested somewhere else such directory information.   However when I uninstalled Silverlight I noticed also that the registry and directory information was missing.   This suggests that installs it Silverlight is not broken.

  The first question - is he's having a problem installing Silverlight on a 32 bit running on a 64-bit computer OS? (I did the installation of the OS :>)

  If I need to upgrade the operating system to the 64-bit version upgrade takes all existing programs to be reinstalled?

  If the 32 / 64 mix - up is not the question so what step should be taken next?

  Thank you very much for the help.

  Hi IAmAPC,

  64-bit computer supports 64 and 32 bits of the operating system on it. To run a 64-bit version of Windows, your computer must have a processor 64-bit capable.

  Silver light is compatible with 32-bit and 64-bit processor and operating system. Windows X 86 or x 64 1.6 gigahertz (GHz) or higher with 512 MB RAM

  Link:http://www.microsoft.com/getsilverlight/get-started/install/default.aspx

  For information about the upgrade and other information related to 32-bit and 64-bit, you can see the link below: 32-bit and 64-bit Windows: frequently asked questions: http://windows.microsoft.com/en-US/windows7/32-bit-and-64-bit-Windows-frequently-asked-questions

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Permission to install problem - difficulty ineffective Instructions

  Windows 7 Home Premium 64-bit update

  All of a sudden, after so many years I had the problem of permission which tells me that Flash Player will not install.

  I followed the instructions from Adobe using the MS program and files FP_BAT and a manual install of FP, but neither solves the problem.

  However, Windows tells me that 21.0.0.213 is installed - is not only the latest version?

  Pls advise.

  Hello

  Our permissions fix script is very restrictive to only the Flash Player files, and it is possible that the file in question is not included.  Please see this document to support Microsoft for assistance, which sets the permissions on the complete file systems: https://support.microsoft.com/en-us/kb/968003

  --

  Maria

• vCloud Director 5.1 install OS Question

  Can I use CentOS instead of Red Hat as the operating system for vCloud Director install?  If yes what the game (if any) would be if I needed VMware support (they even would support me)?

  Thank you for your time.

  Sean

  There is nothing prevents you to install it on CentOS.  During the installation you will be told that you are using an unsupported operating system.

  All the problems that would arise from the use of CentOS instead of RHEL is not support.  We must do better to ensure that it is not a question of use/code, as well a reasonable given the suspicion that the OS is really at fault.

  Strictly speaking, being an employee of VMware, I can't close my eyes go against the recommendations of the platform supported.

  However, in more recent versions, I have not personally seen problems directly related to the operating system.  vCloud is a java-based application and is associated with a specific version of Java that is provided by the installer.  If we use even the system version of Java to create the gap.

  too long, didn't read = you can, but shouldn't.

• Portege 3440CT OS install problems

  Hello
  Just decided to dig my 3440 ct that has Windows 98se on it and reformat an update with XP. He has only 64 MB at the moment, but I thought that if all goes well, then I would switch to 192 MB and whack in a disk that is larger than the original drive 6 gb for the moment. I have the floppy a usb card pcmcia (a Toshiba one).

  When I try to install XP, it sees the Cd and begins starting the process, for example. loading devices. But whenever it gets to the last line says «the installation program starts now...» "it crashes with a blue screen with an error"0x0000007B"that I find something to do with the boot drive.

  Then I deleted the diving and installed XP properly on a desktop computer using an adapter, put it back in the laptop it starts very well until the first wime you see the XP logo and then crashes with the same error

  Then I tried a 60 GB drive, I had in my laptop main that I know works fine and got exactly the same message.

  I then tried Windows 2000 which had the same problems, but eventually worked with 98SE. I tried both with FAT and NTFS and I installed the latest version of bios 1.60. But in vain.

  Someone at - it good ideas as to what im doing wrong?

  Hello

  When you install the restore CD is a simple file and when the external drive is just plugged and recognized that it is not problem to install it but when you install the original version of Microsoft installation must be interrupted and the unit should restart for the installation continues. At the moment the external drive can not be found anymore. I assume that this is the problem in your case.

  Try to create two partitions and copy the CD Win on the second partition and try again to install the unit.

• Tecra 8000: xircom realport modem cem56G-100 lan install problem

  Hi, I have tecra8000 win98 on which I'm trying to install a xircom realport cardbus modem. I downloaded of updates (always available) on the site of intel as well as of the last update of the firmware to resolve installation problems. None of these helped to solve the problem that I encounter, for example, it seems that my xircom is not accepted (windows cannot install the adapter) and on reboot I get a message that the card does not work correctly. Also, I can not select the realport modem card from the adapter list because she isn't here. each index or tip is welcome thanks in advance
  Stephaan

  Hi Stephan,

  Is the latest version of the driver 2.70.01.00?

  Can you please check in the properties for your modem under device status if there is a message (for example Code XXX).

• Pavilion dv7-4010em windows 7 install problem

  Hello. I had a problem, I try to install win 7 64 on pavilion dv7-4010em laptop and not show me any disk at all, but if I try to install win 7 32 I did not have this problem.
  
  I need to know what driver to HARD drive I use, I try and say Windows is not good?
  
  Any idea?

  Thank you in advance.

  Now Im allmost, install the drivers a few complete and done
  
  I take YUMI http://www.pendrivelinux.com/yumi-multiboot-usb-creator/ and just make it bootable USB pendrive without pilot and other needs.  I'm on win 7 32 bit PC system
  
  all all with installation take 20 minutes.
  
  Thanks for the support in any case thumbUp