Grid block problem

Similar Questions

• iOS 10 zoom causing the shift & blocking problem

  Hello

  I have several devices running iOS 10 ranging from a 5 iPad iPhone mini 4, to iPhone and iPad Air 2.  I noticed that when the zoom toggle in the settings is enabled (whether zoomed or not), I feel an enormous amount of lag, tactile and inaccurate affecting blocking problem.  No matter if I am completely zoom in or zoom out (double-tap with 3 fingers), a simple navigation creates all sorts of problems for me.  I will describe a few questions I meet below. ;

  (1) contact command will be sometimes not.  Even simple measures such as scrolling through the different pages on the homescreen to pinch to zoom in the image and Safari have problems

  (2) when zoomed in, many times, my button are inaccurate.  For example, a major problem that I have is that in the mail application.  If I drag to the left to remove an e-mail, I get sporadic movements.  In most cases, I have to slide slightly to the right of the line to do a full sweep.  In other cases, sometimes touching a button like 'OK' or by pressing another button would not register.  I may support slightly above, below, or around her to enroll.  It is extremely annoying.  In particular, I have this problem with my iPad 2 Air.  I'm leaning towards it being a defective scanner.

  Please note that when the zoom toggle is set to off in the settings app, I have no problem with delay or lack of response.

  Anyone else have this same problem?

  I'm having this same issue. Both on my iPhone and my iPad. The two running iOS 10 for now. The problem is not related to iOS 10 in my opinion, because I had this problem for awhile now.

  Affecting the zoom toggle OFF makes the question to go far, but of course that's not the solution. There is a reason why I need this feature to zoom. Deactivation of the zoom feature makes it very difficult for me to use my iPhone and iPad in some circumstances. So, I find myself constantly switch the zoom feature and LEFT. Very annoying. I hope that we will have a fix for it any time soon.

• Blocking problem

  Hello

  We had a blocking problem when insert 2 instructions were trying to insert into the same table. I don't see a reason why 2 commands insert should cause a blocking problem, but it was indeed happening. The table had no triggers, partitions or bitmap indexes. However the table had 2 unique index and primary key constraints.

  Can someone please advice on this? What can be the reason for the impasse here?

  Oracle Version: 11.1

  Thank you

  create table t1 (key primary number n1);

  session 1: insert into t1 values (1);

  session 2: insert into t1 values (2);

  session 1: insert into t1 values (2);  -wait session 2 to rollback or commit

  session 2: insert into t1 values (1);  -waiting for the session 1 to rollback or commit.

  In the seconds 3 session 1 will throw an exception of blocking, session 2 will continue waiting

  Collisions on the uncommitted inserts, updates or deletes on primary, unique (or foreign) keys can cause expected, which means that you can engineer blockages.

  Concerning

  Jonathan Lewis

• Firefox tells me to upgrade to 10.0.1, but also tells me that my AVG security does not work with the update. What should I do for security? I would jump up to date, but I already blocking problems, which always seems to happen if I don't update to the c

  I want to update, but does not lose the security I have and like you.

  A catch-22 here: updated to avoid blocking-time problems and lose my security, I'm uncomfortable with OR keep my AVG security and put up with the frustration of time hang "Mozilla does not.

  You're welcome, BamaGirl.

• Grid Configuration problem Link Datasource

  Hi Experts,

  I have 4 servers managed with cluster 1. I try to configure the data source Link grid to RAC. After you create the data source

  I click on changes in assets, but it says "An Exception occurred everything" by allowing the failover with ONS remote subscription. Later, I found that,

  When I configured the cluster as target for the data source, it says error if not, it accepts (withour any managed cluster and Server Admin).

  I don't know why it shows error. Help, please...

  Hi Joyce,
  My problem is solved. I have not assigned the name of servers managed at the analysis of the IP(RAC_related_work).one of our database administrator database
  Add the IP address of the servers managed at the RAC analysis. So this problem is solved.

  Thank you for your help.

• Presentation of the fluid grid - THE problem with the size of the Image

  Hello

  I worked on a new Web site using the provision of grid of fluid CS6. My site works fine in Chrome and Firefox but in Internet Explorer 9 and 10 and most probably other versions, images resize normall in Chrome and Firefox stay at maximum size in Internet Explorer. Please what could someone take a look at my site and see where I went wrong in the code because I can't find the problem anywhere.

  www.moleseyhire.com/index2.html

  Kind regards

  Ransom of Mitchell

  Try to add to your css:

  TD img {}

  Width: 100%;

  }

• Get the upper left corner of a cell in the grid (math problem)

  I'm doing a map editor for a tile based game. The Publisher made a grid:

  private function drawGrid (): void {}
  var grid: Sprite = new Sprite();

  var tileSize:uint = 50;
  
  for (var i: int = 0; i < line; i ++)
  {
  grid.graphics.lineStyle (1, 0 x 000000, 0.3);
  grid.graphics.moveTo (0, i * tileSize);
  grid.graphics.lineTo (700, i * tileSize);
  }
  for (var j: int = 0; j < column; j ++)
  {
  grid.graphics.lineStyle (1, 0 x 000000, 0.3);
  grid.graphics.moveTo (j * tileSize, 0);
  grid.graphics.lineTo (j * tileSize, 400);
  }
  stage.addChild (grid);
  }

  And when the user clicks anywhere on the screen a movieclip is added to the stage. The movieclip (exported for actionscript as the tile) should appear in the upper left of the grid cell.

  private void placeTile(mouseX:int,_mouseY:int,_frame:uint):void {}
  var: tile = new Tile();
  tile.gotoAndStop (frame);
  Tile.x = PROBLEM HERE
  Tile.y = PROBLEM HERE
  stage.addChild (tile);
  }

  How can I do? I came with an idea, but it did not work because I have a math problem.  Assume that the user's mouse is in the mouseX = 456:

  I could remove hundreds and use the 56 quotient and check if it is greater than 50. If it is greater than 50, I would put it at x = 500, if not I would put it at x = 450. How can I remove hundreds? You have a better idea?

  Post edited by: wilsonsilva7, because subconsciously, I pressed ctrl + s (for save) and the message has been posted

  You must use the mod (%) operator to remove hundreds serving: 456% 100 = 56, but that does not seem the best way.

  If your tiles are 50 x 50, I think that just using Math.floor(mouseX / 50) * 50 is your best bet:

  Math.Floor(456 / 50) = 9

  9 * 50 = 450 = the left edge of the tile that you clicked on in.

• Redesigned the game still a blocking problem

  I am creating a Pentecost gaming mouse control, and I'm having a problem creating a blocker.
  I want to do ' so that if an object is one way the other object should stop just before.
  If the controller was whit the keyboard I cud use the hit test, whit the mouse control it does not work
  This is a link to the game http://www.orasulcarei.com/popescu/joc.fla

  I took a quick glance at your game here, and although there are a few other ways in which you can build such a system. with the methods you were trying to use I think that you would continue to have problems, and I'm afraid that some of the coding that you use was... Well, not quite right :) so for you help along I have if I throw together an example of how you could go to build something like this. I don't know exactly what will be the 'principle' of your game or how it progresses, the end, or what are the objectives. but you may be able to use the basic system of the philosophy of construction in the demo, as a springboard to get you thinking in that direction.

  Keep in mind that this is not the only way that we can do something like that too. Here is a link to the posted demo and download the FLA: HERE

• Unable to print... tail blocked, problem of queue I think help?

  Hello
  I hope someone can help. I am unable to cancil a print job in the print queue, so I'm not able to print anything!  I am operating Windows 7 note: Troubleshooting does not resolve the problem, but a flag indicates that it has been repaired.

  Hi, Glenell,

  What version of Windows are you using?

  Start > type services.msc

  Press enter

  Scroll down to print spooler

  Click with the right button on spooler and select stop

  Wait for Windows to stop the spooler

  Close the window

  Open the print queue and cancel the document

  Narrow queue

  Restart the computer

  Back to services.msc

  Right-click on print spooler and select start

  Wait for Windows to start the spooler

• Form of blocking problem.

  Hi all

  We are often facing the question connects to the lock point organization update form, and it irritates us. There is no lock user or pending sessions, even if we get error like "Could not record reserve" for mtl_system_items.

  Please help on this issue.

  Thank you

  GHG

  Hello, GHG,.

  This problem of locking form is general question.

  Please see the note for this issue below.

  MTL_SYSTEM_ITEMS_B in the form of Master point (INVIDITM.fmb) getting locked in exclusive Mode (Doc ID 375646.1)

• ASM instance after the stand-alone installation of Oracle Grid startup problem

  Hello!
  
  After the Oracle 11 g 2 grid installation and restarting my machine:
  
  Linux localhost.localdomain 2.6.32 - 300.10.1.el5uek #1 SMP Wed Feb 22 17:37:40 IS 2012 x86_64 x86_64 x86_64 GNU/Linux
  
  I run the asmca command and she has no startup ASM instance, I tried to paste the log, but it's too long!
  
  Could someone help me please! Thank you very much!
  
  José
  
  I have just the last piece:
  
  + [hand] [2012-03-15 15:01:56.853 THIS] [SQLEngine.initialize:354] m_bReaderStarted: false +.
  + [hand] [2012-03-15 15:01:56.857 THIS] [SQLEngine.initialize:358] boot player... wire +.
  + [hand] [2012-03-15 15:01:56.919 THIS] [UsmcaLogger.logExit:122] oracle.sysman.assistants.usmca.backend.USMInstance method output: createSQLEngine +.
  + [hand] [2012-03-15 15:01:56.919 THIS] [OracleHome.getVersion:877] OracleHome.getVersion called. Current version: null +.
  + [hand] [2012-03-15 15:01:56.927 THIS] setting [InventoryUtil.getOUIInvSession:347] YES READ to ACCESSLEVEL_READ_LOCKLESS +.
  + [hand] [2012-03-15 15:01:56.927 THIS] /u01/app/grid/product/11.2.0/grid,1+ Homeinfo [OracleHome.getVersion:896]
  + [hand] [2012-03-15 15:01:56.928 THIS] [Version.isPre:274] version to be checked 11.2.0.1.0 version to check against10 + main
  + [hand] [2012-03-15 15:01:56.928 THIS] [Version.isPre:285] isPre.java: FALSE + back
  + [hand] [2012-03-15 15:01:56.929 THIS] [OCR.loadLibrary:308] +.
  Constructor inside the OCR
  + [hand] [2012-03-15 15:01:56.929 THIS] [OCR.isCluster:939] OCRNative call for isCluster() +.
  + [hand] [2012-03-15 15:01:56.930 THIS] result OCR [OCR.isCluster:943] status = true.
  + [hand] [2012-03-15 15:01:56.930 THIS] Boolean result [OCR.isCluster:955] = false +.
  + [hand] [2012-03-15 15:01:56.930 THIS] [Version.isPre:274] version to be checked 11.2.0.1.0 version to check against10 + main
  + [hand] [2012-03-15 15:01:56.930 THIS] [Version.isPre:285] isPre.java: FALSE + back
  + [hand] [2012-03-15 15:01:56.931 THIS] MessageBundle.getMessage () [MessageBundle.getMessageFields:338] failed to load the string PRKC-PRKC-1036: CRS_HOME name passed to the method was no Exception: java.util.MissingResourceException: can't find resources for bundle oracle.ops.mgmt.resources.PrkcMsg, key PRKC-1036: CRS_HOME name passed to the method was null.
  + [hand] [2012-03-15 15:01:56.931 THIS] [ClusterUtils.getCRSActiveVersion:1797] error getting version active CRS: PRKC-PRKC-1036: CRS_HOME name passed to the method was null: < null > +.
  + [hand] [2012-03-15 15:01:56.931 THIS] [OracleHome.getVersion:903] OracleHome.CRSActiveVersion: null +.
  + [hand] [2012-03-15 15:01:57.084 THIS] [OracleHome.getVersion:922] OracleHome.server.getVersion Version: 11.2.0.1.0 +.
  + [hand] [2012-03-15 15:01:57.084 THIS] [OracleHome.getVersion:943] Version of the inventory: 11.2.0.1.0 +.
  + [hand] [2012-03-15 15:01:57.084 THIS] [OracleHome.getVersion:948] using sqlplus: /u01/app/grid/product/11.2.0/grid/bin/sqlplus+
  + [hand] [2012-03-15 15:01:57.084 THIS] [UsmcaLogger.logInfo:141] role SYSASM +.
  + [hand] [2012-03-15 15:01:57.085 THIS] [UsmcaLogger.logInfo:141] OS true Auth +.
  + [hand] [2012-03-15 15:01:57.182 THIS] [SQLEngine.done:2148] actually called +.
  + [hand] [2012-03-15 15:01:57.183 THIS] [UsmcaLogger.logException:171] SEVERE: method oracle.sysman.assistants.usmca.backend.USMInstance:checkAndStartupInstance +.
  + [hand] [2012-03-15 15:01:57.183 THIS] [UsmcaLogger.logException:172] ORA-01034: ORACLE not available +.
  
  + [hand] [2012-03-15 15:01:57.183 THIS] [UsmcaLogger.logException:173] oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-01034: ORACLE not available +.
  
  oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1650)
  oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeQuery(SQLEngine.java:823)
  oracle.sysman.assistants.usmca.backend.USMInstance.checkAndStartupInstance(USMInstance.java:573)
  oracle.sysman.assistants.usmca.backend.USMInstance.discoverASMInstance(USMInstance.java:340)
  oracle.sysman.assistants.usmca.service.UsmcaService.discoverASMInstance(UsmcaService.java:146)
  oracle.sysman.assistants.usmca.Usmca.execute(Usmca.java:230)
  oracle.sysman.assistants.usmca.Usmca.main (Usmca.java:333)
  + [hand] [2012-03-15 15:01:57.184 THIS] [UsmcaLogger.logExit:122] oracle.sysman.assistants.usmca.backend.USMInstance method output: checkAndStartupInstance +.
  + [hand] [2012-03-15 15:01:57.184 THIS] [UsmcaLogger.logInfo:141] ASM was able to start. See /u01/app/grid/cfgtoollogs/asmca/asmca-1203153PM0138.log for more information. +

  Start the asm with the following command.

  Starting at $GRID_HOME/bin/srvctl asm

• Blocking problem down an iMac 21.5 mid 2010

  I have an iMac 21.5 mid 2010, with El Captain 10.11.3. When I try to stop, he stays with the wallpapper in the office without the apps, but he doesn't stop. Can someone help me please?

  Next time you start your iMac again boot into Safe Mode, Mac OS x: departure upward in Mode safe. This will work some diagnostics and repairs on the iMac when starting upwards.

  Stop and see if it does as it should.  Restart normally and try to stop again.

  

• Series M counting buffered of events with DMA - blocking problem

  
  
  

• Problem creating block

  Hi Experts,
  Here, everyone should be aware on the problem of creating block in Essbase in the blocks for scattered members are not created when we try to set a value that is not constant. But when I'm trying to reproduce this problem, I cannot not replicate and blocks created for me.
  I even checked the setting of CREATEBLOCKONEQ at the level of database as well as in ESSBASE.cfg file is DISABLED.
  
  I use the Demo.Basic application with a slight modification where I added the dimension of the year containing FY10 and FY11.
  
  The dimensions are:
  Accounts - Dense
  Period - Dense
  Market - sparse
  Product - sparse
  Year - sparse
  Scenario - sparse
  
  Now, I have data loaded New_York-> FY10-> sale-> Budget to 5 products and all periods. Database statistics show me even 5 blocks.
  
  Now, I try to run the following script to calc to replicate the problem of creation of block
  
  CREATEBLOCKONEQ OFF SET;
  Fix ("budget")
  "Denver" = "New_York" * 1.5;
  ENDFIX;
  
  But I'm able to have created new blocks and the number of blocks celebrates 10 years.
  
  Is someone can please help me replicate the "issue of creating block"?

  SET UPDATECALC OFF ;
  SET AGGMISSG ON ;
  SET EMPTYMEMBERSETS ON ;
  SET CREATEBLOCKONEQ OFF ;
  FIX("Budget")
  "Wyoming" = "New York" ;
  ENDFIX
  

  Hey Cameron,

  In Essbase 9.3.1 also, I think that your code is good in creating blocks for the Member of the formula "Wyoming".
  Creating block problem arises in a complex real world scenarios. See a sample as below
  CREATEBLOCKONEQ OFF SET;
  Fix ("budget")
  "Wyoming" = "New York" + 300;
  ENDFIX

  Member of the formula here Wyoming supposed to sum up the New York and 300.
  This works if New York has block and not if not.
  But the result is 300 if not.

  I hope that this problem is still there in 11.1.2.1 also. I've known some discrepancies in the formula still fixed with CREATEBLOCKONEQ ON calcs.
  How to test close tomorrow.

  Tim,

  Top-Down is not the default behavior. But Essbase will select Top Down calc whenever he needs to get the blocks needed for the calculation.
  No girl b/w Topdown calc and block creation of question.
  Forcing down the high yield erroneous results.

• Spectrum of HP x 360: connection Bluetooth HP spectrum x 360 with headphones Bose QC 35 problem

  Hello

  I have a HP x 360-13 - 4070nz (ENERGY STAR) spectrum and I just bought a headset Bluetooth of Bose, the new Bose QC 35. The headset works like a charm, any 10 Windows PC I tried (XPS13 Dell, Lenovo Yoga) and with my Nexus Android 5 X. However, I have a blocking problem if I use it with the spectrum of x 360.

  Pairing of works, even if I had to repeat the process several times. Once paired, listen to music works for the most well - in stereo mode.
  The problem is when I try to make a call. The problem is the same with any program, Skype, Skype For Business, overview of Skype or my Softphone (Bria). I can hear the consideration, but they cannot hear a really static noise. I tried an echo / service test sound with Skype and the recorded sound is exactly as my counterpart described. I can save and attach if you wish.
  I've updated all the drivers, sound card, Bluetooth, BIOS, I've updated Windows 10 anniversary Windows 10 update, and I updated the 1.0.3 to 1.06 QC35. Nothing helps. I tried the configuration setting possible, remove the Bluetooth device, added again etc. Always static noise.

  It is clearly a problem with the spectrum x 360, and as I know that this model had several other Bluetooth issued before. So my question to HP: could you please look into it and update the drivers to support the Bose QC35, which is a market success?
  
  Thank you and best regards

  Update:

  HP support has been studied on my computer. It is hardware related. HP sent me the new chip Intel Wireless (combining Wifi and Bluetooth). I had to open the laptop and replace the chip on the motherboard.  This procedure unfortunetely has not resolved the .

  There is nothing I can do without sending the laptop for repairs.

  As an alternative, HP recommends purchasing a USB Bluetooth key / dongle.

  I don't know yet if I'll send it repair. It's a phone that I sue for work and I can just live without it for several weeks.

  So I gues no QC35