Blocking problem

Similar Questions

• iOS 10 zoom causing the shift & blocking problem

  Hello

  I have several devices running iOS 10 ranging from a 5 iPad iPhone mini 4, to iPhone and iPad Air 2.  I noticed that when the zoom toggle in the settings is enabled (whether zoomed or not), I feel an enormous amount of lag, tactile and inaccurate affecting blocking problem.  No matter if I am completely zoom in or zoom out (double-tap with 3 fingers), a simple navigation creates all sorts of problems for me.  I will describe a few questions I meet below. ;

  (1) contact command will be sometimes not.  Even simple measures such as scrolling through the different pages on the homescreen to pinch to zoom in the image and Safari have problems

  (2) when zoomed in, many times, my button are inaccurate.  For example, a major problem that I have is that in the mail application.  If I drag to the left to remove an e-mail, I get sporadic movements.  In most cases, I have to slide slightly to the right of the line to do a full sweep.  In other cases, sometimes touching a button like 'OK' or by pressing another button would not register.  I may support slightly above, below, or around her to enroll.  It is extremely annoying.  In particular, I have this problem with my iPad 2 Air.  I'm leaning towards it being a defective scanner.

  Please note that when the zoom toggle is set to off in the settings app, I have no problem with delay or lack of response.

  Anyone else have this same problem?

  I'm having this same issue. Both on my iPhone and my iPad. The two running iOS 10 for now. The problem is not related to iOS 10 in my opinion, because I had this problem for awhile now.

  Affecting the zoom toggle OFF makes the question to go far, but of course that's not the solution. There is a reason why I need this feature to zoom. Deactivation of the zoom feature makes it very difficult for me to use my iPhone and iPad in some circumstances. So, I find myself constantly switch the zoom feature and LEFT. Very annoying. I hope that we will have a fix for it any time soon.

• Firefox tells me to upgrade to 10.0.1, but also tells me that my AVG security does not work with the update. What should I do for security? I would jump up to date, but I already blocking problems, which always seems to happen if I don't update to the c

  I want to update, but does not lose the security I have and like you.

  A catch-22 here: updated to avoid blocking-time problems and lose my security, I'm uncomfortable with OR keep my AVG security and put up with the frustration of time hang "Mozilla does not.

  You're welcome, BamaGirl.

• Grid block problem

  Hi all

  I have a small problem when I create a grid of block (I don't know the name, thus: tool text button-> right arrow).

  InDesign me canvassing all very nicely but after I write that in the first cell, that m 'annoys me at the highest point, not including d' where it comes from. I know select other cells but cannot write to it.

  I thought I had United Nations response by checking eng 'ignore USH' in the option of block of text, but was ultimately not really help.

  Anyone have a solution please? A virtual beer as a reward, I'm one of those me.

  Thank you.

  Hello

  There's a thing that I in doing this case.

  After creating my blocks (which are actually chained together) I the aux.1 and run the script 'SplitStory '.

  (if ever: menu window-> utilities-> Scripts >-> example-> Apple Scripts and double click on "splitStory")

• Redesigned the game still a blocking problem

  I am creating a Pentecost gaming mouse control, and I'm having a problem creating a blocker.
  I want to do ' so that if an object is one way the other object should stop just before.
  If the controller was whit the keyboard I cud use the hit test, whit the mouse control it does not work
  This is a link to the game http://www.orasulcarei.com/popescu/joc.fla

  I took a quick glance at your game here, and although there are a few other ways in which you can build such a system. with the methods you were trying to use I think that you would continue to have problems, and I'm afraid that some of the coding that you use was... Well, not quite right :) so for you help along I have if I throw together an example of how you could go to build something like this. I don't know exactly what will be the 'principle' of your game or how it progresses, the end, or what are the objectives. but you may be able to use the basic system of the philosophy of construction in the demo, as a springboard to get you thinking in that direction.

  Keep in mind that this is not the only way that we can do something like that too. Here is a link to the posted demo and download the FLA: HERE

• Unable to print... tail blocked, problem of queue I think help?

  Hello
  I hope someone can help. I am unable to cancil a print job in the print queue, so I'm not able to print anything!  I am operating Windows 7 note: Troubleshooting does not resolve the problem, but a flag indicates that it has been repaired.

  Hi, Glenell,

  What version of Windows are you using?

  Start > type services.msc

  Press enter

  Scroll down to print spooler

  Click with the right button on spooler and select stop

  Wait for Windows to stop the spooler

  Close the window

  Open the print queue and cancel the document

  Narrow queue

  Restart the computer

  Back to services.msc

  Right-click on print spooler and select start

  Wait for Windows to start the spooler

• Form of blocking problem.

  Hi all

  We are often facing the question connects to the lock point organization update form, and it irritates us. There is no lock user or pending sessions, even if we get error like "Could not record reserve" for mtl_system_items.

  Please help on this issue.

  Thank you

  GHG

  Hello, GHG,.

  This problem of locking form is general question.

  Please see the note for this issue below.

  MTL_SYSTEM_ITEMS_B in the form of Master point (INVIDITM.fmb) getting locked in exclusive Mode (Doc ID 375646.1)

• Blocking problem down an iMac 21.5 mid 2010

  I have an iMac 21.5 mid 2010, with El Captain 10.11.3. When I try to stop, he stays with the wallpapper in the office without the apps, but he doesn't stop. Can someone help me please?

  Next time you start your iMac again boot into Safe Mode, Mac OS x: departure upward in Mode safe. This will work some diagnostics and repairs on the iMac when starting upwards.

  Stop and see if it does as it should.  Restart normally and try to stop again.

  

• Series M counting buffered of events with DMA - blocking problem

  
  
  

• Problem creating block

  Hi Experts,
  Here, everyone should be aware on the problem of creating block in Essbase in the blocks for scattered members are not created when we try to set a value that is not constant. But when I'm trying to reproduce this problem, I cannot not replicate and blocks created for me.
  I even checked the setting of CREATEBLOCKONEQ at the level of database as well as in ESSBASE.cfg file is DISABLED.
  
  I use the Demo.Basic application with a slight modification where I added the dimension of the year containing FY10 and FY11.
  
  The dimensions are:
  Accounts - Dense
  Period - Dense
  Market - sparse
  Product - sparse
  Year - sparse
  Scenario - sparse
  
  Now, I have data loaded New_York-> FY10-> sale-> Budget to 5 products and all periods. Database statistics show me even 5 blocks.
  
  Now, I try to run the following script to calc to replicate the problem of creation of block
  
  CREATEBLOCKONEQ OFF SET;
  Fix ("budget")
  "Denver" = "New_York" * 1.5;
  ENDFIX;
  
  But I'm able to have created new blocks and the number of blocks celebrates 10 years.
  
  Is someone can please help me replicate the "issue of creating block"?

  SET UPDATECALC OFF ;
  SET AGGMISSG ON ;
  SET EMPTYMEMBERSETS ON ;
  SET CREATEBLOCKONEQ OFF ;
  FIX("Budget")
  "Wyoming" = "New York" ;
  ENDFIX
  

  Hey Cameron,

  In Essbase 9.3.1 also, I think that your code is good in creating blocks for the Member of the formula "Wyoming".
  Creating block problem arises in a complex real world scenarios. See a sample as below
  CREATEBLOCKONEQ OFF SET;
  Fix ("budget")
  "Wyoming" = "New York" + 300;
  ENDFIX

  Member of the formula here Wyoming supposed to sum up the New York and 300.
  This works if New York has block and not if not.
  But the result is 300 if not.

  I hope that this problem is still there in 11.1.2.1 also. I've known some discrepancies in the formula still fixed with CREATEBLOCKONEQ ON calcs.
  How to test close tomorrow.

  Tim,

  Top-Down is not the default behavior. But Essbase will select Top Down calc whenever he needs to get the blocks needed for the calculation.
  No girl b/w Topdown calc and block creation of question.
  Forcing down the high yield erroneous results.

• Spectrum of HP x 360: connection Bluetooth HP spectrum x 360 with headphones Bose QC 35 problem

  Hello

  I have a HP x 360-13 - 4070nz (ENERGY STAR) spectrum and I just bought a headset Bluetooth of Bose, the new Bose QC 35. The headset works like a charm, any 10 Windows PC I tried (XPS13 Dell, Lenovo Yoga) and with my Nexus Android 5 X. However, I have a blocking problem if I use it with the spectrum of x 360.

  Pairing of works, even if I had to repeat the process several times. Once paired, listen to music works for the most well - in stereo mode.
  The problem is when I try to make a call. The problem is the same with any program, Skype, Skype For Business, overview of Skype or my Softphone (Bria). I can hear the consideration, but they cannot hear a really static noise. I tried an echo / service test sound with Skype and the recorded sound is exactly as my counterpart described. I can save and attach if you wish.
  I've updated all the drivers, sound card, Bluetooth, BIOS, I've updated Windows 10 anniversary Windows 10 update, and I updated the 1.0.3 to 1.06 QC35. Nothing helps. I tried the configuration setting possible, remove the Bluetooth device, added again etc. Always static noise.

  It is clearly a problem with the spectrum x 360, and as I know that this model had several other Bluetooth issued before. So my question to HP: could you please look into it and update the drivers to support the Bose QC35, which is a market success?
  
  Thank you and best regards

  Update:

  HP support has been studied on my computer. It is hardware related. HP sent me the new chip Intel Wireless (combining Wifi and Bluetooth). I had to open the laptop and replace the chip on the motherboard.  This procedure unfortunetely has not resolved the .

  There is nothing I can do without sending the laptop for repairs.

  As an alternative, HP recommends purchasing a USB Bluetooth key / dongle.

  I don't know yet if I'll send it repair. It's a phone that I sue for work and I can just live without it for several weeks.

  So I gues no QC35

• Guard judgment of Windows XP. Event Veiwer Watch: \Device\Harddisk0\D, has a bad block

  I have a Dell Dimension 2400 with Win XP PRO SP3. It keeps closing after half an hour to an hour. The event viewer shows the following error in the system log: \Device\Harddisk0\D, has a bad block

  Same thing happens in Safe Mode as well. I ran McAfee who reported no virus. I have auto-updated from Microsoft on and just installed the lates updates.

  Help, please. Thank you... Nam

  Speed stop?

  Unexpected/unpredictable and quick stops are generally caused by overheating or bad RAM modules.  This happens too fast to create an entry in the newspapers.  Try downloading / running the freeware 'CoreTemp'.  It will show you how hot your CPU is getting and how close to maximum temperature, it is.  If this is your problem, open your folder and check your fans to make sure they turn all.  Use a can of compressed air to remove dust, because it can act like a blanket and heat your components.

  To solve your problem of bad block, run "Chkdsk" with the 'repair' or ' / R ' option.  This should clean up your bad block problem.

  "How to perform the disk error checking in Windows XP"

  <>http://support.Microsoft.com/kb/315265 >

  HTH,

  JW

• HP ENVY 17-2090nr 3D OVERHEATING AND FREEZING PROBLEM!

  Pleas help me, my PC freeze all the time. I read a lot of posts on the forum, but the general idea is that there is no solution.

  A sad Guy:

  "They eventually replaced.
   
  System Board
  central processing unit
  radiator and fan
  top of case (recent cases have apparently been changed to improve air flow)
  "lower case (as above).

  Pleas tell me what to do!

  Hello

  Please ensure that you have the latest version of BIOS and drivers installed. You can run HP Support Assistant and update your drivers and BIOS in particular. After doing that and you still experience blocking problems. I would say in support of HP to set up a service event.

  http://support.HP.com/us-en/document/c02028499

• intermittent connection problem: 'the user profile Service service has no logon. The remote procedure call failed and did not execute. »

  Hello, I'm having intermittent problems with logging in my Windows 7 computer.

  Often after reboot due to applications of Windows Update or any simply restart after the holidays, I have the following message on trying to connect:

  "The service user profile Service has no logon. The remote procedure call failed and did not execute. "

  When I click 'OK', the machine disconnects and try to restart.  This can occur 2 to 5 times before _works_ .  But sometimes it happens at all.  And sometimes he _partially_ connects, but my "reminder" and the "Sidebar Gadgets' not loading not correctly and I get a different RPC error - for example, I lived once a message RPC over Skype cannot work because the remote procedure call failed.

  I'm fairly certain that it is different from the frequently reported issue 'profile of corruption', which was experienced by others.  This problem manifests itself as 'the user profile Service does not log. The user profile could not be loaded "and is reported as a blocking problem consistently reproducible which is set by the 'fixing' of the profile.

  However, the issue I feel is clearly related to an RPC problem is intermittent and not consistent - maybe one of my devices is not reset properly?  Where I can look in the logs of Windows, to provide relevant information on this subject?

  Because my computer was still under warranty, I have raised the issue of Dell and they removed the damaged system file (user account) last week.

  I hope that this will finally fix the problem (previously the error message disappear and reappear after a few weeks later.)  I'll give it a few more weeks to be sure.

• Connect OBIEE Admintool to hive: problems with ODBC. Any option?

  We are facing a blocking problem when you try to connect to an instance of hive Admintool using an ODBC driver.

  For a CEP, we are trying to set up a domain of hive to analyze in OBIEE. Everything seems to work OK

  until we try to load the metadata. In this case, the schema is found but not table under him. We can add the

  Physics of table by hand, and then we can successfully launch the number of lines. We then try to load the lines, but to

  the point that we have faced a strange behavior. But summarize the steps we have taken.

  (1) we downloaded ODBC drivers to connect to the hive (we tried with Hortonworks, Cloudera, Microsoft and)

  MapR, but the results are the same);

  (2) we have set up the connection to the hive on port 10000 and successfully run the ODBC test (BTW: to)

  SQLDeveloper we can connect to the same server via the JDBC driver and query the tables here);

  (3) then we start Admintool. Once we have defined the name and the password, we then select the ODBC connection.

  in fact there aren't strictly necessary user name and password, but we offer them anyway;

  (4) the next step is to load the metadata; and here is the first issue, because we can see the patterns but not

  the tables.

  

  (5) anyway we are going on and insert a schema (we read there could be problems with more than one schema, then)

  We simply select one); in a blog (by Rittman, who really is 'THE' guru OBIEE) it is said that the tables are not

  loading directly, so we tried simply adding a physical table in the physical layer as the default schema.

  making sure the table exists;

  (6) once we have added 'physically' table that we proceed with the number of lines; and we get correctly the number of

  ranks once we overview the name of table after that;

  (7) then we try to retrieve the lines and the question; We get the following error message:

  

  We also dug a bit little and concluded that the request received by hive instead of being

  SELECT * FROM trucks

  it becomes

  SELECT FROM trucks

  If the ' *' is passed to the SQL statement sent. If we run the same query on the Beehive, we get

  exactly the same exception ParseException error, it really seems that there is a problem in the

  construction of the SQL statement.

  Any idea about this problem? (if a fix exists, because after so many attempts, we are convinced

  This is a bug that can only be fixed by a new version of Admintool)

  BTW: we have tried almost all the possible options for the ODBC driver (such as 'native of use request',

  ("Use Unicode" and so on) and in regards to the Admintool, we have not seen what option

  or preferably (at the physical layer) can influence this anomaly.

  Any help is really, really appreciated. Thanks in advance.

  OK, I got what you're saying. I mean, to focus on the bigger picture. If you can make a data view or list Table to import metadata is a bit unrelated to the final goal. Annoying, but irrelevant. What you try to do, is get OBIEE to build queries dynamic SQL based on the logical requests which will submit your users via presentation against the presentation layer Services.

  Continue to build your SPR (ignorant that display data does not work) at a very simple level, with a single fact/Sun in the business model, single domain - and then run an appropriate query generated in answers through it. The point of all this is to see how OBIEE SQL query then generates, and if it's worth a one hive.