Gridlines do not print in excel using officejet pro 8600

Similar Questions

• Photo printing is blurred: HP Officejet Pro 8600 Plus

  Hello

  Recently I bought printer HP Officejet Pro 8600 Plus and I have no complaint about normal printing.

  Yesterday I bought HP Everyday Photo paper glossy and took some Photo impressions. to my surprise, I see that there are a lot of blur and a large part of the ink is taken on the photo.

  This printer really print photo printing? or I'm doing something wrong

  Output picture is very blurry, a large part of the cartridge from the printer and the ic a sensation by using ink on my fingers

  can someone help me here

  Thank you

  Load the print paper down in the input tray side.

  Many papers have print sides and not printable as paper photo and other special media.

• iMac may not print on HP Office Jet Pro 8600 N911a

  We have a mixed network of PC and Mac at home.  The PC and iMac are connected by a cable network and a Netgear router.  The iMimi is to connect through a router Apple Airport wireless and was able to print on the printer. The PC and printing to the printer very well. I just bought an old iMac problem and have send files to print.  The iMac and can see the printer on the network. And I can see the power of printer ink levels.  I also see the IP address of the printer on the network.  However, I can't get the files to print to the printer.  They enter the print queue and remain there.

  I did a software update and loaded the latest drivers from HP.  I am currently Mac OS 10.6.8 'Snow Leopard '.  What is more, now the iMini Pad can not print to the printer.  I also followed the recommendations and used disk utility to update permissions on the iMac.  Any ideas on what is the problem?

  More info on the printer:

  Model: OfficeJet Pro 8600 N911a

  Service ID: 23230

  FW version: CLP1CN1322CR

  Serial number: {deleted private information}

  Driver version: HP inkjet Driver3.3.3 3

  Product number: CM749A

  I have reset the modem, router, printer and computer and solved the problem.

• HP scanner not work on the new Officejet Pro 8600

  Hello

  I have a brand new Officejet Pro 8600 Premium and a not scan using the HP scanning application.  When I click on the "Scan" button, I finally have a message that says "Sanner reported an error Impossible to log on to the device.  I am able to print without any problems.

  I've updated all the software with the latest version from the HP website.  I'm on OS X Lion of the mountains (10.8).  I am also unable to perform a scan by using the picture Capture application in my folder of the application.  When I try to use this application, all the buttons are gray, so that I can not click on them.

  Thank you

  Chris

  I was able to fix this on my own.  I discovered that SNMP has been disabled in the settings of the printer.  Once I enabled it, not only the scanner started to operate via HP Scan, but the HP utility has been able to identify and change the settings of the printer, where before it only showed the printer as 'unknown '.

• Printing envelopes on the Officejet Pro 8600.

  Greetings.

  I'm looking for instructions on printing of envelopes with success on the Officejet Pro 8600.  The printer tries to feed a printer, but stop feeding envelopes because they are pulled in.  Using plain old monarch # 10s.  I realized I have to disable the detection auto-fonction support.  Help.

  Thank you

  Hi BishopB;

  Hope you are doing well and I'm sorry that you are having problems.

  This document shows how to load the envelopes to the printer.

  http://support.HP.com/us-en/document/c02890475

  This article will provide you also with the support of the envelopes by this printers;

  http://support.HP.com/us-en/document/c02858465

  It can be useful;

  RobertoR

• Problems printing envelopes on HP Officejet Pro 8600

  For some reason any I'm more able to print envelopes from a Word document. The driver continues to operate as if she couldn't pick up the envelope in the paper tray.  I have reset the printer as indicated, clean the rollers according to the instructions and still no luck. I tried this on 2 of my HP printers same two 8600. Running the Vista operating system.
  I see I'm not the only one with this problem.  I try to print return address from the company Office Depot #10 envelopes of window I've done several times in the past...
  Updated the firmware, drivers and all that but still no luck.
  Any other ideas?

  Thank you very much.

  Recommendations also on one new other than HP printer.

  Hello @cafe104 , welcome to the forums.

  I read about how you can no longer print envelopes from MS Word to two Officejet 8600. I have some suggestions for you that can help and also a few questions.

  1. Having a problem with printing from other programs?
  2. You have the printer connected directly to a wall outlet (avoiding bars, surge protectors, etc.)?
  3. Did you run the print and Scan Doctor, and what were the results?
  4. Have you tried to uninstall and reinstall the printer?
  5. Have you tried to uninstall and reinstall MS Word?
  6. Try to update the firmware of the printer: get the latest Firmware and updates

  I could be wrong, but if you have tried printing from 2 printers and envelopes do not print, there is a change the problem is not the printers and related software. Try changing the method of 'feeding' on how you print on envelopes. I've seen that work in my past history of troubleshooting and can work for you too?

  Here is my example for you, try these two feeding methods:

  

  Let me know the answers and results and we can take it from there.

  Thank you

• Printing cards on an Officejet Pro 8600

  I can print on plain paper, but when I load the card stock (standard size 8.5 x 11), I get an error indicating that the tray is empty. It seems not serious if I place the card on top of paper paper, or alone in the sandbox. I have printed fine on an Officejet 6500. Am I missing a setting somewhere?

  Problem solved... for some reason that I had to say specifically "Tray1" instead of "Automatically select" for the paper greeting card software source "»

• Set as default print 2 sides for OfficeJet Pro 8600

  Hi there - I can't seem to set the printing default for the 8600 in 2 pages.  I tried in Mac/settings and on the Web server, but no luck - of ideas?

  I have a 8600 using a Mac with the MAvericks, I have the full install software

  Thank you very much. I'll make this a try when I'm home. I admit that this printer is more problematic than others I have used. Regardless, thank you. I'll test it later and give glory...

• OfficeJet Pro 8600 - Macbook Pro and Macbook Air does not print

  Products:

  • HP Officejet Pro 8600
  • MacBook Pro (Mac OS X, Version 10.7.5)
  • MacBook Air (OS X, Version 10.8.2)

  Question:

  • Why my Mac initially print fine, but now will not print?

  Full article:

  I have a wireless network in my house that consisted of a 30 MB cable internet, Netgear 900n, HP Officejet Pro 8600, 2 laptops from Dell with Windows 7, a laptop Lenovo with Windows 7 and Dell with Windows 7 trick, all printed matter very well.

  The HP Officejet 8600 was added to my network about 2 months ago.

  I added a Macbook Pro and Macbook Air about 3 weeks ago.  The two Macs printed fine for about a week.  Then suddenly they stop.  I spent about 2 hours on the phone with HP's Service, and finally, they said to my router.  So I called Netgear.  NETGEAR was useless!  They wanted me to accept fees for services before they would even discuss the issue.

  As a result of information provided by the HP support service, and because Netgear will not support their product, I quickly bought a new router - an Apple Airport Extreme.

  Macs will recognize the printer will print if connected via a USB cable, but do not print wirelessly on the Officejet Pro 8600.  The fine impression CPA.

  The frustration that is felt is made up by the fact that Macs printed very well with the Officejet Pro 8600 2 weeks and now the printer shows just "idle"... even with a new router. (see image below)

  Please help, thank you very much for all support.

  As a side note, the representative of the HP Service was very friendly and definitely tried to support the HP product, which is much more I can say about Netgear.

  Thank you

  

  Hello

  More likely a problem with Multicast, which Apple devices are relies on to communicate with the device through the network.

  First try unplugging the router for 30 seconds.

  Connect to the power supply and wait 2-3 minutes.

  Turn off the HP printer and turn it back on, then check all difference.

  If it persists, try to change the configuration of your router as follows

  Note: the settings below are not related with the HP product, I provide you with the steps as a best efforts and those based only on my own knowledge. You can try to change the settings of the router at your own risk:

  1. Open the router configuration page (you'll find listed as the default gateway by clicking the icon on the printer wireless, then print a network configuration report.
     
  2. Click the Advanced tab.
  3. Click the configuration option in the menu, and then click Setup WAN.
  4. Be sure to uncheck the box Disable IGMP proxy transmission and apply the changes.
  5. Click on the LAN configuration on the same Setup menu.
  6. Set the RIP RIP-2 Version and apply the changes.
  7. Restart your router and then check any change.

  I hope that you will find useful information, you can also use the guide to the user below for more information:

  http://www.downloads.NETGEAR.com/files/GDC/WNDR4500/WNDR4500_UM_07DEC2011.PDF

  Shlomi

• HP Officejet Pro 8600: Recently a fax pops up when I try to print photos and the picture does not print

  We have a printer all-in-one HP Officejet Pro 8600 operating from a desktop HP with Windows 7. Recently, in the last two weeks my wife told me, we cannot print photos. The documents appear to be printed without a problem, but when trying to print a photo we get a window titled 'Send Fax - HP Officejet Pro 8600'. We have never used or even hung fax capablitly since we have owned this printer (maybe 2-3 years). All of a sudden, this window is displayed when we try to print a photo and the photo does not print.  I can't tell you that my wife did not hit accidentally a wrong button somewhere down the line, but she says she does not. I tried to attach a screenshot of the window, but for some reason that it does not take it. It's probably something very simple, but technically challenged myself, I can't understand. Help, please.

  Thank you

  Vince Pellerito

  Print picture of what program?  Some programs to keep their own default values for the printer.  It seems that the default printer for the printing of the photo program has been set to Fax.  Try to open the program, select the Officejet Pro 8600 as the printer rather than the Officejet Pro 8600 fax.

• HP Officejet Pro 8600 N911g cannot print wireless AirPrint or desktop/laptop

  Hello

  My systems are all running Mac OS X 10.8.2 (Mountain Lion). I have a Linksys E4200 configured for 5 GHz Wireless-A and 2.4 GHz Wireless-G. For testing purposes, I have firewall of the router disabled.

  Here's what I CAN do:

  -connect to the Web server for the printer (printer is correctly connected to the wireless network)

  -print using ePrint (printer running mechanically)

  What I can not do:

  -Install the printer in OS X

  -printing of my office/computer systems portable

  -printing of my devices via AirPrint

  I tried the following:

  -reset the network settings on the printer

  -restart the router

  -restart all systems

  Error messages:

  -System preferences print & Scan shows the printer as "near printers: Officejet Pro 8600 [CBE189].

  -in installation "settings until 'Officejet Pro 8600 [CBE189]" configuration of the device... ". "returns with"Unable to communicate with the printer at the moment"and I have to cancel installation

  -When printing using iOS devices, I can choose the printer, but any print job expires.

  Any help would be greatly appreciated!

  Thank you!

  Too bad! Solution found - unplug the power cord, wait 30 seconds, plug it in again. Pop, it works. (So old-school)

• Printers HP Officejet Pro 8600 keeps going offline... but the menu of the printer says it's online

  I had continual problems when you try to print to my HP Officejet Pro 8600.  For example, when I try to print a word document, it indicates that the printer is offline.  I checked the printer by clicking on "see what's printing section, and then click printer.  When I view this screen, the printer offline is not checked.  In addition, the printer screen is showing that the printer is online as well.  I have a wireless connection and I am running Windows 8.1.  Thanks in advance for your help.

  Hello

  Thank you for using the forum.  You can try the following:

  Please download and run the HP Print and Scan Doctor (PSDR) tool to diagnose and solve your problem

  http://h20180.www2.HP.com/apps/NAV?h_pagetype=s-926&h_lang=en&h_client=s-h-E016-1&h_keyword=DG-PDU

  Hope that helps.

• HP Officejet Pro 8600 continues to read printer off line even if hard wired - help!

  I'm unable to print on my HP Officejet Pro 8600.  It will not print wireless so I wired with an ethernet cable.  Printer says offline.  What to do next?  Help, please!

  Finally got it working today.  My son-in-law the fixed.  He said, he said offline, because the network was not see an IP address from the wireless printer.  Basically, he opened the printer HP Officejet Pro 8600 dialog box and clicked on add a printer and re-installed.  Thanks a lot for your help.  I hope this can help someone else in the future.

• OFFICEJET PRO 8600: PRINTING BLACK AND WHITE ONLY

  Printer does not print in black and white only, even if this option has been selected by "Printer properties" or "Printer Preferences".

  Please read this post then provide some details.  There the error messages on the computer screen or the printer?

  The Officejet Pro 8600 series has separate heads for printing and ink supplies.  To protect the print head of damage the printer requires all inks to be present to print in black only.  If one or more of the inks are exhausted, they must be replaced to allow printing.

• OfficeJet pro 8600 printer-how to make this program work and installation?

  I have problems printing. I wonder how to ste it to the top and do work.

  Moved from feedback

  Original title; printer Officejet pro 8600

  Hi David,

  1. what operating system is installed?

  2. what security software is installed?

  You can go through the printer manual to know how to set up the printer and make it work.

  You can also refer to these items and check if that helps.

  http://h30434.www3.HP.com/T5/printer-all-in-one-install-setup-e-g-Windows-8/How-do-I-install-printer-software-on-HP-OfficeJet-Pro-8600/TD-p/1123283

  http://h30434.www3.HP.com/T5/forums/SearchPage/tab/message?filter=labels%2Clocation&location=Forum-Board%3AInstall&q=OfficeJet+Pro+8600+printer

  Let us know if you need assistance with any windows problem. We will be happy to help you.