"Grinds away" for an hour at the start of the computer. No idea what is running.

Similar Questions

• New user of the computer, no idea what to do

  EU L/Top with windows 7 can give me step by step instructions on how to record a cd in windows media player and copy it to cd?

  Hello

  wenfromthepark wrote:
  

  EU L/Top with windows 7 can give me step by step instructions on how to record a cd in windows media player and copy it to cd?

  Here is a link on the instructions to do this from Microsoft.

  Best regards
  ERICO

• Get the blue screen for about an hour after the computer on in the morning, citing "kernel_stack_inpage_error"

  I started having the blue screen about an hour after the computer on in the morning, citing "kernel_stack_inpage_error"  The error after reboot report cites an error of the pilot, but not accurate, and I don't know how to find out which driver would be.

  Hello

  ·          Since when are you facing this problem?

  ·          Remember to make changes to the system?

  ·          What is the exact error code that you meet in the blue screen?

  ·          When you encounter this error on blue screen? This happens at random, or whenever you access any program?

  I suggest you to follow the steps mentioned in the article below and let us know your progress.

  You receive an error message on a Windows XP-based computer: "Stop 0 x 00000077" or "KERNEL_STACK_INPAGE_ERROR": http://support.microsoft.com/kb/315266

• When I burn CD for my use on the computer, sometimes the order of the songs are returned, starting with the last song first.

  * Original title: Windows Media player

  When I burn CD for my use on the computer, sometimes the order of the songs are returned, starting with the last song first.  This is the CD, or I do something wrong?  This isn't an ongoing problem... most of the time it's ok.  Can I change the order manually. If Yes, where and how.

  Thank you

  Lee

  Lee - there are a number of possibilities. First of all, it depends whether you burn audio disks or data - if they are audio discs, you can check and rearrange the order of songs in the burn list - if necessary - before you start burning. If you drag multiple files to the burn list quite often the last track you clicked on will go upward, so I wonder if it is what can happen. Back with a little more detail if I not quite correctly interpreted the problem. Best regards, Ric.

• When I try to synchronize my mobile browser for my browser of the computer, it says that my email address is already in use. Then when I tried to connect under this email address

  When I try to synchronize my mobile browser for my browser of the computer, it says that my email address is already in use. Then when I tried to sign in under that email address, it says the password or user name is incorrect. I have already reset the password and tried again, still without success.

  Close firefox, restart your phone and try out it...

• Sleep mode will not work after sleep said she sleeps for 2 seconds then the computer boots back on its own.

  Original title: "sleep" mode

  Sleep mode will not work after sleep said she sleeps for 2 seconds then the computer boots back on its own

  Hello

  See if this information helps you, Vista and 7 work the same:

  "How to restore the default power Plan settings in Vista"

  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  "How to solve a problem of Mode Vista or Windows 7 sleep"

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  See you soon.

• I had a copy of Windows 7 Ultimate SP1 for quite awhile and discovered that I need a new facility (the computer refuses to Windows to run at all).

  Hello!

  I had a copy of Windows 7 Ultimate SP1 for quite awhile and discovered that I need a new facility (the computer refuses to Windows to run at all). I picked up my installation disc and everything, only to find out that someone stole completely he reapply. I am unsure weather or not it is enabled or whatever it is. I tried to call Microsoft technical support and they said to go to the retailer I bought since then, but the retailer in question no longer exists. I'm just screwed?

  Thanks for your help!

  You can retrieve the product key, and then use it to re-download a new copy:

  Here are four utilities, which can display your product keys if they are still there:
  Belarc Advisor: http://www.belarc.com/free_download.html
  (He did a good job of providing a wealth of information.)

  Also: http://www.magicaljellybean.com/keyfinder.shtml
  and: http://www.nirsoft.net/utils/product_cd_key_viewer.html
  and RockXP: http://www.majorgeeks.com/download4138.html which has additional features

  Go to the recovery of the software Page and then enter your key:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

  If you plan to upgrade to Windows 7, see:

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• When you add a Segment to the canvas of the campaign, you would add members every hour until the campaign turned in what scenario?

  Hello

  When you add a Segment to the canvas of the campaign, you would add members every hour until the campaign turned in what scenario?

  Thank you

  Hello...

  The segment will have new members added periodically, and you want that they are added to the campaign as soon as it happens

  Thank you

  edynamic expert Eloqua

• I can't remove the thunderbird to my computer. Whenever I do and try to reinstall the old problems developed again. I already formatted the computer... what to do

  I can't remove the thunderbird to my computer. Whenever I do and try to reinstall the old problems developed again. I already formatted the computer... what to do

  But what was your question? virus? most of the time its not even located in thunderbirds dirctories. Then it reappears.

• MacBook Pro requires authorization for 'printerAgent' each time the computer starts

  HP OfficeJet Pro 8500 has e-all-in-one printer

  Mac OS 10.7

  Because I configured the printer whenever I start my computer, I get the message:

  "Do you want the 'printerAgent' application to accept inbound connections of netwrk?

  It comes from the firewall.

  Every time I give permission, but it is not known.

  I can't find any "printerAgent" app, so I can't add it to the list of "approved" firewall

  How to sort, please!

  Uninstall the printer software using the "scrubber":

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Press and hold Ctrl + Alt + Cmd keys on the keyboard at the same time as you click on uninstall< this="" is="" the="" scrubber="" option,="" there="" is="" no="" button="" labeled="">
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Restart your Mac

  Download and install this: support.apple.com/kb/DL907

  Now reset the printing system:

  -Sys Prefs, Print & Fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

  If you want advanced features, you can get the complete software of features for your printer from the "Support & drivers" link at the top of this page, but you don't need absolutely it.

• After you install the updates of windows for Vista home edition, the computer tries to restart and then says "computer could not start", then begins to the Startup Repair. Suggestions, how can I fix?

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hello

  Welcome to the community of Windows Vista answers.

  First of all, we will try if we can start in safe mode.

  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

  Steps to start your computer in safe mode with networking
  1. to start mode safe mode with networking, restart the computer and press the F8 key for about four to five times. You will see "Safe Mode with network" listed in the advanced options of Windows.

  2. Select "Safe Mode with network" and then press ENTER.

  Access the link below for more information on how to start in "Safe Mode with Networking":
  http://windowshelp.Microsoft.com/Windows/en-us/help/323ef48f-7b93-4079-a48a-5c58eec904a11033.mspx

  The system restore.
  http://support.Microsoft.com/kb/936212

  Method 1:
  The restore of the system of Windows Recovery Environment (WinRE)

  (a) Insert Vista DVD and boot from the DVD.

  (b) that you want to start the computer from the Windows Vista DVD, you press a key, your keyboard when you see the prompt. You should now see a black screen with a white status bar at the bottom indicating that Windows is loading files... After some time, the status bar becomes completely white and you will see a screen indicating that Windows is loading. The environment of the installation of Windows continues to load and when finished you will be presented with a screen that prompts you for information about your location and language.

  (c) in this screen, you must configure the language to install, time and currency format and keyboard or options for method of entry so that they are well positioned. When done, press the next button. You will now be at the main Windows Vista Setup screen where you would normally install Vista on a computer.

  (d) because we want to repair the computer, you must click on repair your computer option. This will bring you to a new screen where the repair process get all facilities of Windows Vista on your computer. When finished, you will be presented with the System Recovery Options dialog box

  (e) select the Vista installation you want to repair.

  (f) in the system recovery options, click on system restore to restore the system.

  Method 2:

  Run the disk check Windows recovery environment to correct the bad sector on your hard drive

  (a) Insert Vista DVD and boot from the DVD.

  (b) that you want to start the computer from the Windows Vista DVD, you press a key, your keyboard when you see the prompt. You should now see a black screen with a white status bar at the bottom indicating that Windows is loading files... After some time, the status bar becomes completely white and you will see a screen indicating that Windows is loading. The environment of the installation of Windows continues to load and when finished you will be presented with a screen that prompts you for information about your location and language.

  (c) in this screen, you must configure the language to install, time and currency format and keyboard or options for method of entry so that they are well positioned. When done, press the next button. You will now be at the main Windows Vista Setup screen where you would normally install Vista on a computer.

  (d) because we want to repair the computer, you must click on repair your computer option. This will bring you to a new screen where the repair process get all facilities of Windows Vista on your computer. When finished, you will be presented with the System Recovery Options dialog box

  (e) select the Vista installation you want to repair

  (f) in the system recovery options, select command line and enter the command chkdsk/r.

  For the above two steps, you can see the link below.
  http://windowshelp.Microsoft.com/Windows/en-us/help/95b4c03a-ac42-49a4-a90d-8f3736a995271033.mspx

  Once you perform the restoration of the system, download the updates and install them manually one by one, this should help you knowing what update causes this problem.
   
  Concerning
  Amrihta.

• flashing cursor for long hours after the installation of finished windows7

  I have an office foxconn a74ml-k amd x 2 cpu, 250 GB hard drive, 1 GB of ram, I launched format and installed windows 7, installation is going well, completed, after restart only blinks for long hours, I have the cd drive as a secondary port to SATA master hard drive as 3rd, I only have one ide connector I tried my best, always the cursor blinks, I connected the drive hard ide also, same result, mobo is foxconn a74ml-k, help me please

  drive cd and hard drive are connected in SATA

  I removed the cd player and tried only with hard disk, always the cursor blinks

  then I removed full sata only hdd connected in IDE slot, installed as usual, always cursor blinks

  I format the drive hard zero level, completely erase

  also changed the ram

  other information, I treid with a hard drive install windows vista 32 bit, same result

  Windows 7 32 bit, 64 bit I tried the same result, mind blowing

  What would be the problem! Please help me,

  Thanks for the reply, finally I fixed it, after a serious analysis, the problem was, front usb port and card reader, I deleted and erased cmos, boot through hard drive, it came nicely, now its working perfect!

• Windows 7 for Lenovo G50-70 - the computer will not boot from the CD

  Hello world

  I hope that someone here will be able to help

  I bought a new laptop with Windows 8.1. I want to install Windows 7 on that I know well because I can't use the new windows. I changed the settings in the BIOS to get the machine to boot from the CD, but it won't be fair. I also tried to restore the system to boot from the CD, but it installs just the Windows pre-installed, new instead. Also, I can't access the CD from the drive while all my other computers are capable of (what is strange)

  Can someone help, please?

  See you soon

  PS. : I can turn on the computer through the small "boot botton" on the side and select the DVD drive to boot from. But this is not followed by the message "Press any key to boot from CD" and the computer starts just W8 yet;

  I contacted customer service and followed your advice. They refused to help him on the ground that there nothing wrong with the machine in their opinion, and since I wanted to change operating system. All preinstalled spyprogrammes Lenovo has been erased with this downgrade. So far, I've owned a laptop computer brand new and expensive for a year I used only to waste my time, trying to make it work, that was not why I bought it in the first place. What a RIP-OFF!

• Scanner does not work for all users on the computer Windows 7

  Photosmart 7510 Scanner does not work.  My scanner has the habit of work.   Now it does not for one of the three users on my Windows 7 desktop.

  I spent over 3 hours on the phone with HP.   They had me restart the computer, Plug and unplug the printer, reinstall the software twice under different names. The software depending on what user id, it is installed under allows access to the scanner/printer to one or more users.  The scanner works with Windows Paint software for all three nicknames.

  HP response is that some user control prevents the scanner software, who used to work on all three nicknames on the computer, which now works on one or more of the users.  They couldn't tell me which user control need changing.

  The HP solution is to restore my system when I could scan for all users of three.   I don't want to do that.   Does anyone have a better solution?

  The real problem is HP error messages.   When I click on scan a document, there is no answer.  Nothing happened.

  Then I tried to scan using Windows Fax and Scan.   I got an error message which helped me locate the source of the error.   I was able to fix the problem without creating a new user account.  I had deleted bu error the file MY Document.   Restore this file fixes the problem.

• I used to export the pliers cuts Ribbon, but recently - to keep having the same exact video quality as source (analog)! -J' I just export for external HDs (so the computer)... I recently bought the 13-verssion PREM and I tried (I think) everything b

  I used to export clips cuts to the Ribbon (version 9.0), but recently I bought version 13.0 of FIRST and - to keep the exact same video quality as source (analog)! -J' I export simply for external HDs (so actually at the computer)... but everything I try, I noticed that when I check the hardware with the original of the first export clip is NOT ONLY SMALLER but ALSO FACT do NOT SEEM to HAVE THE SAME RESOLUTION, DETAILNESS, SHARPNESS (or whatever you call it)... What I am doing wrong? WHAT SETTINGS should I HAVE to DO in order to KEEP the SAME IMAGE QUALITY (or even improve) to be STORED on the COMPUTER?     Thank you, RVH

  How do you export?