Problem loading the images after update of the plugin

Similar Questions

• Satellite A200 and Win7 - problem loading the graphics driver

  Hi guys I have a problem with my Satellite A200 (PSAF6A).
  I installed windows 7 just now, now half the time when I start the computer it displays a message on windows encounters a problem loading the graphics drivers and the resolution is terrible. When I restart immediately, most of the time, it loads fine - no message and a good resolution. I tried many driver reinstall but it is always the case.
  Someone knows what's the problem? Is this with windows 7, or do you think the graphics card can be on the road to extinction?

  Thanks for your help, a lot.
  -Chris

  Hello

  It was ok before installing windows 7? I don't think it's a hardware problem. Have you installed the driver for the Toshiba driver page?

• Problem in reboot loop after updates.

  I have windows XP on an Asus A8V-E-SE motherboard has developed a problem in reboot loop after updates.  It will not go in safe mode either.  Stop at a display of the driver.  I used the recovery console using the XP cd and you can see the update directories in the systemroot folder.  I followed the instructions in the forum to uninstall every update by accessing commands back to the subdirectory spuninst update and then run "Batch spuninst.txt.  I get a bunch of 'access denied' messages for each of them (varies in amount of "access denied" messages by everyone but consistent for each.)  It's not like the batch uninstall for the update does not work.  I tried to uninstall all updates yesterday 10/02/10 (I had 10) even with the "access denied" messages, but it still will not initialize properly.  No way to move the access denied message?

  See the RESPONSE (by Kevin Hau) message in this thread: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/73cea559-ebbd-4274-96bc-e292b69f2fd1

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Firefox Android ver 27 Samsung Galexy 3 10.1 Unable to load the Plugin for my said Foscam is not compatible with worm 27

  I have a Samsung Galaxy tablet model N° GT-P5210 (Intel chips) 4.2.2 Android running with Firefox Mozilla worm 27. When I try to access my camera of security on the net, I get my initial page indicating that I need a plug-in. The plugIn downloads but on said install: it is not compatible with Firefox 27 worm. I have no problem with laptops and PCs running windows. BUT my Tablet just will not load the plugin required to view the video transmitted from the camera Foscam F19805W

  You use the in game store?

  • Play app

  There is this: http://www.appszoom.com/android_appli.../ip-cam-viewer-lite_cwi.html via http://webtechnologyph.wordpress.com/.../foscam-ip-camera-frequently-asked-questions/

  I would not a plugin that is not compatible with ff27 for android on a website that a developer has implemented this notice. However in the words: page of the FF for android browser config there are items that you can enable if you have taken research taking into http://kb.mozillazine.org/Plugin-container_and_out-of-process _... for more information.

• Problem with the plugin ActiveDirectory

  I have a problem with the plugin active directory that it does not show the OUs under a spesific UO (I guess that's because there are too many objects in this spesific UO and for some reason any, limit the amount of objects, it can show).

  To work around the problem I wanted to use the Active Directory script class and use the search method, but I can just find a way to create this object to use the reproductives I guess that I do not understand something in the API.

  Read this it looks like it could be typo...

  Please share your script, or search for mistyped as ActiveDirectory.Search ().

  For example - to throw the object system: TypeError: cannot find the default value for the object

  This code online

  System.Iog ("Test");

  because this isn't a lowercase L, it is a shift that i and this method does'nt exist on the object of the system...

  Other objects throw correcting errors as this method does not exist in the wrapper dyn...

  Depends on the implementation and management inside of it I guess than errors

  Kind regards

  Andreas

• Problems loading the updates of Windows 7 Home Premium

  Hi, I'm new to this Yes please forgive my ignorance. I was very happy user of Windows 7 Home Premium for quite awhile and updates of the software always loaded without any problems. Recently, I made a BIG mistake by taking advantage of the free upgrade to Windows 10. I tried for three weeks and hated it for several reasons, decided to go back to my Windows 7 tested and reliable HP. Unfortunately, and despite the claims of Microsoft, the 'old' system does not install exactly as it was before.

  My task manager no longer exists and every time he told me not to cut as updates windows load (i.e. loading 1 NN updates etc... ") it always ends telling me that there is an error. Then he hangs up and after a long period of time, I am forced to shut down my PC by cutting the freezer (it won't let me turn off, by any other means.

  Can someone tell how can I solve these problems, particularly the second.

  Thank you

  Please run the Windows Update Troubleshooter:
  http://go.Microsoft.com/?linkid=9830262

  Please provide details of any problem it reports as not fixed.

  Bonus tip: Please do not start in double thread as it may slow down the answer to your question.

• Problem loading the images with the php script.

  As a webdebdesigner that I developed a cms system to download images with php to a mysql database. Firefox version 5.0.1 for MAC and earlier versions have no problem with the script download. But after this version, it is impossible to upload images more large then 250 KB. The page where the customer chooses his image for the download hangs and the form is not sent to the real upload script, which must validate and process the image.
  This problem only occurs in Firefox, all other browsers work fine!
  In addition to this: give feedback for firefox is not possible for the Mac.

  Try announcement Web development / standards evangelism MozillaZine forum. The helpers there are better informed on issues related to the development of website with Firefox.
  
  http://forums.mozillazine.org/viewforum.php?f=25
  
  You will need to register and log in to post in this forum.

• Problem loading of Image of CSS by dynamically loading the fxml file?

  H1. Introduction
  I develop load a file FXML leave a controller. The FXML uses CSS and images for buttons are defined in the CSS.
  
  CSS directory structure
  .fxml < package >
  
  Images
  the <>package. fxml.resources. < subdir >
  
  Example of CSS Code

  .buttonImage {
      -fx-background-image: url("resources/subdir/image.png"); 
  }

  Example of loading the controller code fxml

           URL location = getClass().getResource("/package/fxml/UI.fxml");
           FXMLLoader fxmlLoader = new FXMLLoader(location);
           fxmlLoader.setLocation(location);
           fxmlLoader.setBuilderFactory(new JavaFXBuilderFactory());
           Parent root = (Parent)fxmlLoader.load(location.openStream());
           Controller = (Controller) fxmlLoader.getController();
           newPane.getChildren().add(root);

  H1. Problem
  The fxml file does not load, and causes the following error:

  javafx.fxml.LoadException: Page language not specified.

  Rate this file fxml loaded correctly so that the images have been added.
  
  Any ideas of what could go wrong?
  
  H1. Attempted
  I tried the following: tried to change the url of the image as an absolute path.

  The problem is your onAction managers. If you point to a Java controller, we must start by #. for example #profileEventFired

• You are able to load the plugin settings after that put 10.1.1 to level?

  After the last update of GB that I am not able to load the settings of plug-in via .pst files - they are greyed out in the standard dialog box - and they are still same after copy them in the standard folder (under /Music).

  I am able to save the new setting, but does not load them via the next-> load menu in the window of the specific plugin parameters.

  Any help/feedback would be apreciated! Thank you!

  -Claudio

  El Capitan 10.11.4

  After the last update of GB that I am not able to load the settings of plug-in via .pst files - they are greyed out in the standard dialog box - and they are still same after copy them in the standard folder (under /Music).

  What box are you using?

  I can open PST plug-in in the plug-ins pane in the Info of the smart control panel, for example to open a "Preset" Space Designer. And my plug-ins saved opens thus: for example:

  

  I saved my own preset as MyAmphitheaterExtrem.pst of ~/Music/Audio Music Apps/plug-in Settings/Space Designer / s 02.5 MyAmphitheaterExtrem.pst and copied pst two presets in Logic Pro X in the same folder.  Then I quit garageBAnd and recorded market and my saved preset appeared in Space Designer Panel, as well as logic copied presets.

• Problem loading the data in the table

  Hi friends,
  
  I'm using ODI 11 g.
  I'm doing a flat file for the Table mapping. I have 10 records in the flat file when loading the data in an Oracle table, I can see only 1 card is loaded.
  I use IKM SQL add and control using separate option.
  
  Can you please let me know where exactly the problem.
  
  Thank you
  Lony

  Hi Lony,

  Please let us know other KM by in your ODI interface.
  Please check in the flat file, column PK have same value or it idifferent?
  Please check if the header is present in your flat file.
  When you load the file in the table of the model > right click on the table (flat file adding that model table) and click Show data and see all 10 records are you able to see at ODI level

  Kind regards
  Phanikanth

• Problem with the plugin Update Manager

  I'm having a problem with the update on my VC Server Manager (2.5 build 104215).  Update Manager is not downloaded updates.  In VC when I go to Plugins it shows that Updae Manager is installed and enabled.  If I remove the check mark for Enabled & then turn it back on, I get a message - "the server could not interpret the customer's request" - but the checkbox reappears.  I also have this message when I run VC on the server, but not from my PC.

  If I right click on the download VMware Update Manager update scheduled task and select Properties, I get a message - "the plugin for this task has not been saved.   All VMware services are started.  The Update Manager

  Update Manager is built 1.0.0.63972 and the VI client on the server is 104215

  Thanks for any help.

  He is now in place and running as planned?

• I have download the Adobe Flash Player application, but it does not work. I already loaded the plugin update.

  I followed the instructions of the forum. I uninstalled Flash Player. I installed the latest plugin. When I THROW the installation of Flash Player application, I get the installation of Adobe box, but it is empty. I let it sit long (more than 30 minutes) and is not doing anything. When I close the box, Windows Explorer opens and looks like he's on the Adobe website, but there is nothing displayed in the display area.

  Hi Lizzieness, if you have problems with the installation of flash, please try to use Setup offline https://www.adobe.com/products/flashplayer/distribution3.html - to firefox to use the windows exe installer in browser plugin...

• Problem loading the metadata in the Planning

  Hello
  
  When I try to load the metadata in the Planning, I have this error message in my journal: "Fetch registered members" + Member + "failed."
  
  But what is odd, is that the Member is responsible.
  
  Thanks for your help.
  
  Virgil.

  I saw this issue when there are invalid characters in the data sources usually at the end of a line, this could possibly be line breaks or carriage returns.
  I check the source data and clean.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Tecra A9 - can only burn images after update to Vista SP1

  Hello

  I have Tecra A9 and Windows Vista. After upgrade (I think it was SP1) I have problem with the recording of CD and DVD (I can burn only images like Iso, bin). During burning files I got the error:

  Windows tells me an error in the scs/raid - said vista host controller that I have no drivers - it is not true because I installed several downloaded form Toshiba support drivers.

  I found similar problem in this forum:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=144650𣔊

  But in my registry I did nothing to remove (I have no superior...).

  Hello!

  Have you tested other burning software or updated?

  I put t know Tecra A9 you exactly and what STRANGE but on the Toshiba site is an update of firmware for Matsu * a drives available.
  So look at this site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  You said that you get a Windows error you mean error #19?
  http://support.Microsoft.com/kb/314060

  Good bye

• problems of inPoint layer after update CC2014.2

  Hi people,

  After the update of CC2014.2 I have problems with the correct starttime in some layers.

  Write a script which generate project files to a JSON with several compositions, textlayers, images etc.
  Now, when the script open one of the compositions to create layers, they will be created, but the inPoint is false.
  In other versions of AE incl. CC, the inPoint is usually 0, but now it has some strange values, that I just can't explain to myself.

  My first try to avoid the problem was the inPoint und startTime to 0 but 2014.2 it will not help.

  In older versions, these changed the inPoint correctly.

  Bug report has been sent, but has anyone an idea how to solve these strange behavior?

  myLayer.inPoint = 0;
myLayer.startTime = 0;

  I don't know if it solves your problem, but try to change the startTime before changing the inPoint.

  Dan