Gross salary of base with CC - please help!

Similar Questions

• recently I formatted my windows XP PC. after update to show that it does not allow the genuine.but when I brought it was authentic. I have the product key with me.Please,help help find the solution

  recently I formatted my windows XP PC. after update to show that it does not allow the genuine.but when I brought it was authentic. I have the product key with me.Please,help help find the solution

  Please visit http://www.microsoft.com/genuine/ and click the Validate Windows button, then restart your computer.

  If you were not able to validate, follow these steps:

  1. Download this diagnostic tool, save it to your desktop: http://go.microsoft.com/fwlink/?linkid=56062

  1B. double-click the executable file to run the tool.

  2. after running the tool, click the Windows tab, and then click copy in the Clipboard.

  NB: You can open a new file in Notepad, paste the contents of the Clipboard in it & keep for future reference.

  3 start a new thread in the following forum and paste the results of the WGA diagnostic data in a post detailing the problem: http://social.microsoft.com/Forums/en-US/genuinewindowsxp/threads

  4 Troubleshooting specialist will analyze the data and recommend an appropriate solution.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I bought the lightroom 6 worked fine, now it used to open when I try to open the Dungeon of circle of color on spining and wont start, I work with mac, please help me, tried to shut down and restart, nothing works

  I bought the lightroom 6 worked fine, now it used to open when I try to open the Dungeon of circle of color on spining and wont start, I work with mac, please help me, tried to shut down and restart, nothing works?

  Try to hold the alt/option key while you restart Lightroom. Make sure that the right catalog file is selected and click on the "integrity test" box to see if there is a problem with the catalog file that might be repaired.

• I get an "Access denied" message when I try to get my mail Yahoo, only with Firefox, please help.

  Firefox is the best browser and my reasons and I thank you for the years of great service.
  However, yesterday I started to have an 'access denied' message when I login.
  It does not happen with Safari or Chrome, but I prefer Firefox, please help.

  Thank you

  Don Bancroft

  You are using a bookmark, or you start with the homepage (home) on this Web site?

  If you use a bookmark to open a specific page on the server and then try to navigate to this page from the home page or the page of connection Web site where this bookmark is currently suspended.

  Best is to avoid the bookmarking a specific page which has been achieved by sending POST data in a (hidden) form or bookmarking a page that contains the GET data added to the URL (? xxx = xxx) or links to a specific area in the case where load balancing is used because they can easily get broken if changes are made to the server.

• I have adobe first 10 items and I'm having some problems with it please help

  Here are the problems I am having with Adobe Premiere Elements 10:

  1 transitions won't load. The word loading will appear and it will not come to the top.

  2. the videos will not play smoothly. When I press on play skipps in a way he will not play smooth, making it very difficult to change.

  3 keeps closing on me. It will be something that comes up that says "Adobe premiere elements has stopped working and closes in the program. He does constantly.

  Please help me I don't know what's the problem with him.

  The first two numbers sound like a video driver issue.

  What is the make and model of your video/chip card?

  What is the installed video driver number and date?

  For the last number, it could be many things, including the video driver. I look over this ARTICLEand if there is nothing in the first part, then proceed to set up a computer in the second part of the OS. It would probably be a good time to publish the complete specifications. your computer and the images of your project and Source. Finally, the third part covers many of the troubleshooting tips and provides many links.

  Good luck

  Hunt

• need help with query-please help

  Hi all
  I want to convert the query to a view online below. I write examples of data that I used

  create table pde(empno number(10),act_hour varchar(10 byte));
   
  Table created
   
  insert into pde values(211,'12:20');
  insert into pde values(211,'06:00');
  insert into pde values(213,'07:00');
  insert into pde values(213,'07:20');
   
  WITH  got_total_hours     AS
  (
       SELECT SUM (   TO_NUMBER (SUBSTR (act_hour, 1, 2))
                  + ( TO_NUMBER (SUBSTR (act_hour, 4, 2))
                    / 60
                    )
                  ) AS total_hours  
       from      pde
   
  )
  SELECT        TO_CHAR (FLOOR (total_hours))
         || ':'
         || TO_CHAR ( MOD (total_hours, 1) * 60
                , 'fm00'
                 )     AS hh_mm,empno,act_hour
  FROM     got_total_hours ,pde
   
  this is the output i am getting  
   
  HH_MM  EMPNO  ACT_HOUR
  32:40     211     12:20
  32:40     211     06:00
  32:40     213     07:00
  32:40     213     07:20
  
  i tried changing the above query to an inline view given below
  SELECT        TO_CHAR (FLOOR (total_hours))
         || ':'
         || TO_CHAR ( MOD (total_hours, 1) * 60
                , 'fm00'
                 )     AS hh_mm,act_hour from(SELECT SUM (   TO_NUMBER (SUBSTR (act_hour, 1, 2))
                  + ( TO_NUMBER (SUBSTR (act_hour, 4, 2))
                    / 60
                    )
                  ) AS total_hours  
       from      pde)
  
  ORA-00904:''ACT_HOUR":invalid identifier

  Please help me
  thanking in advance
  Kind regards
  oracleuser
  
  Published by: makdutakdu on January 5, 2010 11:41

  Just push "with the clause" within the main request and give an alias of the table for him... something like

   SELECT TO_CHAR (FLOOR (total_hours))
    || ':'
    || TO_CHAR ( MOD (total_hours, 1) * 60 , 'fm00' ) AS hh_mm,
    empno                                                     ,
    act_hour
     FROM
    (SELECT SUM ( TO_NUMBER (SUBSTR (act_hour, 1, 2)) + ( TO_NUMBER (SUBSTR (act_hour, 4, 2)) / 60 ) ) AS total_hours
       FROM pde
    ) got_total_hours ,
    pde
  

  Ravi Kumar

• Pavilion: I forgot my password BIOS administrator and get 'system disable' with '85379569' Please help me

  .

  Hello:

  Please read the first post on the link below for what to do with the system off (halt) code given by the PC.

  http://h30434.www3.HP.com/T5/notebook-operating-Sy...

• Tungsten T3 - need to DAT file access with address - please help

  I have an old Palm Tungsten T3. The desktop computer with the address information synchronized died and the T3 has lost power (so no more addresses).

  I have a. Backup DAT files with all my addresses. Can someone tell how can I have access to these.

  Palm Desktop 4.1.4e reinstalling did not help because it does not allow me to import. DAT files.

  Can I import this file into any other application or open in Excel etc.?

  Any advice would be much appreciated.

  Thanks in advance.

  You must physically copy the .dat file in the directory of the user on the existing address.dat file.  Find the one with your short hotsync name (i.e. - C:/Program Files/Palm (or PalmOne) / name of your Hotsync/address) and copy the .dat file.

  Make sure that you copy the file and keep another a safe in the case where something goes wrong.  The existing empty address.dat file will be only about 2 k in size.

  Good luck!

  WyreNut

• My first spteps with ESXI - please help-

  Hello

  I am planing to use ESXI to implement servers using Microsoft software, and I need your help to make the best choices...

  First of all, I'm not sure about the hardware, and I can't aford any HP, IBM, etc... so I'm going to buy a part-by-part asemble, that is why your experience is so valuable to me.

  My first goal is 1 DC, 2 ISA, 1 Exchange, 1 Sharepoint servers and perhaps a SQL but don't know yet, for 100 to 200 users and adding 1 more exchange and Sharepoint in the future to handle 1000 users

  Most importantly, I want to know, is what SATA RAID configuration is Bether, how many hard drives and storage capacity, RAM, etc.

  Thank you

  and sorry for my bad English

  Enjoy your disagreement, yes 10:1 is correct, according to what makes the box. You would include an Exchange box with a 400 GB data store in a configuration of 10:1 with a Sharepoint/SQL Server with 200 users? We run a 6:1 with 40 users and that's good, but in the scenario of the fvsalinas?

  In this scenario, that I'd probably, after a full laboratory test, follow these steps:

  DC + Exchange

  -QuadCore / 8 GB RAM / 1 x RAID 1 (2x36GB SAS) for system OSs + 1 x RAID 1 (2x36GB SAS) for the Exchange transaction logs + 1 x (3 x 500 GB) RAID5 for Data Exchange

  ISASharepointSQL

  -QuadCore / 8 GB RAM / 1 x RAID 1 (2x36GB SAS) for OSs + 1 x (3 x 500 GB) RAID5 for data system

  Could be a Variant 2

  All about -.

  -QuadCore / 16 GB RAM / 1 x (2x146GB SAS) RAID for system OSs + 1 x 1 to (or 2 TB) NAS / SAN

  Depends on what precedes > much< on="" what="" the="" anticipated="" throughput="" storage="" needs="" will="">

• How to convert AVI files for first CS4 (Mac) with VLC - Please Help!

  Hi thanks for the reading-post it here for the first time.

  I'm another grass sorry, trying to convert AVI files, so I can import them into first CS4 on a Macbook Pro laptop. I am using VLC on the macbook to perform the conversion. I don't want to use free converters such as iSquint (tried and many others) b/c they cause a significant loss of video quality. But I'm trying to do it for free! (I'm broke).

  Been read tons here and on other forums to get advice first, but in my view, none is really specific to my situation.

  I'm fine (slight quality loss) video but NO Audio. I want the audio too!

  AVI files seized on an old NV3 camera SD card.

  VLC said the Codecs for these files I got off the SD card are as follows:
  0 workflow:
  Type - video
  Codec - MPEG - 4 (XVID) video
  Resolution - 640 x 480
  Rate - 30

  Stream 1:
  Type - Audio
  Codec-MS ADPCM (audio ms)
  Channels: Mono
  Sampling frequency - 22050 Hz
  Bits per sample - 16

  I tried several different configurations with VLC conversion according to the documentation of "Supported file Formats for import in first CS4": http://help.Adobe.com/en_US/PremierePro/4.0/WSf52ca809ac8f6c7135876f961243120b72d-8000.htm l

  For example I tried to convert the same file as follows:

  Wrapper MPEG 1 - converted with MPEG-1 VIDEO 1024 bits/Audio MP3 192-bit
  Wrapper MPEG 1 - converted with MPEG-1 VIDEO 1024 bits/Audio MP3 128-bit
  Wrapper MPEG 1 - converted with MPEG-1 VIDEO 1024 bits/MPEG Audio 128-bit
  Wrapper MPEG 1 - converted with MPEG-2 VID 1024 bits/Audio MP3 128-bit
  Wrapper MPEG 1 - converted with MPEG - 1 1024 bits/MPEG Audio 16 bit VID
  Wrapper MPEG 1 - converted with MPEG - 1 1024 bits/MP3 Audio 16 bit VID
  
  When converting to MP4 (MPEG-4) I get a general error while importing first so no dice on that, and I tried a lot of other configurations/combinations, but not all. 

  I check each result with VLC before import into the Prime Minister and they play both audio & video fine with VLC.

  My question is the following: what settings can I select in VLC for audio first? Or if there is a specific codec I need to download and install a download link... would be much appreciated.

  Alternative solution?...

  If I put these files on the SD card in my camera and click on and drag them on the macbook pro laptop as AVI files (instead of dragging to a PC first, as was the case)... don't you think it would make a diff?  Also, I tried sucking to the top of the camera first, but that didn't work... the camera turns on when connected to the computer... so that you can not navigate to a file on the camera and then use the GUI first to suck.

  I have a laptop. These original files play well with Windows Movie Maker because I downloaded the appropriate codec. Hi and low tried a mac version of this codec without result. CS4 my install discs do not work on Windows/PC. Trust me I wish they did! Even the configuration required on the package is in the absence of any mention of Windows. Windows Movie Maker convert .mov... that was my first game b4 plan, I realized that VLC was quite robust and user-friendly in its Export Wizard codec functionality.

  Any help would be much appreciated! I swear! I'm banging my head against the wall and I want to just change already!

  Thank you!

  Do not use the flow function; This isn't what you are doing.  (Although technically, I don't think it matters)

  Use the convert/save option.  The first screening, video - H.264 + AAC (MP4), should work great.  Don't change anything.  Save the file with a MOV or MP4 extension.

  If you get audio weird sounding, then create your own preset that matches the Video - H.264 + AAC (MP4) preset, uncheck only Audio the Audio tab and convert to video.  Then run convert/Save using the Audio - CD preset.  Save the file as a WAV (or an AAC?).

  Import the 2 files into PR.  You shouldn't have synchronization problems if the points are aligned in when you add them to the sequence.

  -Jeff

• Problem of plugin with CS4 - please help

  I am trying to open InDesign CS4 and I get a "Cannot open the file, please install the latest version or upgrade to the latest version of InDesign your plug-ins". I did the upgrade to InDesign, but I can't find anything on the upgrade of plugins. As well, which is really weird, is that it says it cannot find all Adobe pluging and I all loaded.

  Help, please!

  There is a CS5 file, probably.

  Bob

• Xbox wireless controller not connecting with PC, please help

  I tried on a PC running on windows 7 and windows xp.  I have both the wireless controller and the wireless receiver.  I installed the software, press the Connect button on the receiver and then pushed him on the controller.  The lights turn in a circle, then keep just 4 flashing, it never connects.  What I am doing wrong?  Thank you.

  Hello

  Setting up Windows Media Center

  To use Windows Media Center with the Xbox 360, you must have a computer running Windows Media Center. Windows Media Center is included with the following versions of Windows:

  ·         Windows 7 Home Premium or full, professional edition

  ·         Windows Vista Ultimate or Home Premium

  ·         Windows XP Media Center Edition 2005

  Step 1: Get the key Setup of Xbox 360

  1. on your console, go to My Xbox , and then select Windows Media Center.

  2. follow the on-screen instructions.

  3. write down the 8 digit Media Center Setup key.

  Step 2: Add an Extender on your computer

  1. start Windows Media Center.

  2. click on tasks, and then click add Extender.

  3. When prompted, enter Xbox 360 8-digit setup key.

  4. complete the configuration of the Extender

  For more information, visit the link given below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Windows-Media-Center-Extender-device

  http://Windows.Microsoft.com/en-us/Windows-Vista/share-your-media-in-Windows-Media-Player-with-other-people-or-devices

  Thank you, and in what concerns:
  Shalini Surana - Microsoft technical support.
  Visit our Microsoft answers feedback Forumand let us know what you think.

• NVIDIA 8400 GS display freezes driver Windows 7 with BSOD - please help

  Hello

  I have a desktop HP Pavilion Elite m9040n. I've upgraded to Windows 7 Ultimate 32 bit about 6 months ago. It works fine, but the last few weeks that my PC keeps freezing with the display driver to crash. The last update of Windows or Adobe Flash player could have caused it? I tried different versions of the Nvidia Windows 7 display driver without success.

  Any suggestions?

  I replaced my graphics card to an ATI Radeon HD 4350 (I got to use it and could not go higher because of the restrictions of electricity in my PC motherboard) and all the problems have been resolved. Just an info.

• Pix515E with CIDR, please help

  Hello world

  It has just acquired a new pix 515E with PIX version 6.3 (5), PDM 3.0. I had 16 IP of COX, who is 70.183.141.192/28 CIDR, once I configured the interface inside and outside, the networking works, the problem is with her could not acquire all other addresses. IE, I used 70.183.141.193 and outside the entry door, the network works fine, but I can't use NAT to configure an internal PC to use this address: 70.183.141.194; If I reset the pix 515E and use 70.183.141.194 as the external IP address, then I can use 70.183.141.193 for the NAT, but if I don't use it for 2 hours, 193 address is lost again and I need to re-initinize it by resetting the firewall is used as external IP and then change to another IP to make it visible again.

  Sorry for the long description, my questions are:

  1 is - 6.3 (5) version pix515E support CIDR address Pix? I had another one working with class address C is perfectly fine.

  2. If Yes, what hurts set up? If this is not the case, what should I do to recognize all 13 usable addresses?

  Any suggestions are greatly appreciated.

  Sean Chang

  PIX support CIDR, I use a 28 on my external production network. As to what is wrong, it would be useful that you could paste your config file.

• Palm TX is not sync with vista, please help

  null

  Hello and welcome to the Community Forums of Palm.

  The TX is synchronized with Vista, but you must download and install the new Palm Desktop 6.2, which is available on the support download link & above.

  But it works with Vista 32-bit desktop computers, desktops not 64 bit Vista.  If your Vista is the 64-bit version, you cannot synchronize with the USB cable and need to use Wi - Fi, Bluetooth or IR (infrared).  There is the son of stickied this forum dealing with all of these options.

  Message relates to: None