Tungsten T3 - need to DAT file access with address - please help

Similar Questions

• DVD how much we need for the files backup with backup and restore program?

  Hello how are you?
  DVD how much we need for the files backup with backup and restore program? Y at - it large differences in the time and space between write backups on DVD and external hard drive?

  I do not understand your question.  Asked how the space has been used on your C: drive and you answered 60 GB.  Now you say your PARTITION C: is 60 GB with only 20 GB used?  I really don't understand what you're so confused.  It's simple arithmetic grade 3rd.  What is space you USED on the C: drive, that multiply by 0.7 to obtain the amount of space will be used on your backup disk after compression.  Divide this number by 4.7 and round.  That's how many DVDs you'll need if you insist on the use of DVDs for backup.  Then

  (1) If you are using 60 GB, the answer is (60 x.7) / 4.7 = 8.936.  I rounded up to 9 and added 1 just to be sure.

  (2) If you use only 20 GB, the answer is (20 x.7) / 4.7 = 2.97 rounded up to 3.  Add 1 and get 4.

  If you use only 20 GB, I am very surprised, because almost any important installation of Windows 7 is going to take more than 20 GB.

  All of this assumes that you do NOT use the Windows backup and restore program, but one that I recommended.  When I used the windows one, the results were several times the space that I used on my C: partition.

  Good luck.

• I really need someone to help me. I tried to figure out how to select a PDF to convert a Word doc. When I go to select a PDF file, all that comes is the WORD documents. doesn't show ANY of my PDF files... Please help me understand wh

  I really need someone to help me. I tried to figure out how to select a PDF to convert a Word doc. When I go to select a PDF file, all that comes is the WORD documents. doesn't show ANY of my PDF files... Please help me understand what is happening? We put it on automatic renewal so I know it's not that we have not renewed this subscription, because we pay automatically.

  Hi olivias,.

  Looks like there may be some confusion on your system which application should be associated with PDF files. You can reset the file name associations by following the steps described in these articles (depending on your operating system):

  How to change the default application for a file type. Macworld

  http://Windows.Microsoft.com/en-us/Windows/change-default-programs#1TC=Windows-7

  Please let us know if you have any additional questions.

  Best,

  Sara

• recently I formatted my windows XP PC. after update to show that it does not allow the genuine.but when I brought it was authentic. I have the product key with me.Please,help help find the solution

  recently I formatted my windows XP PC. after update to show that it does not allow the genuine.but when I brought it was authentic. I have the product key with me.Please,help help find the solution

  Please visit http://www.microsoft.com/genuine/ and click the Validate Windows button, then restart your computer.

  If you were not able to validate, follow these steps:

  1. Download this diagnostic tool, save it to your desktop: http://go.microsoft.com/fwlink/?linkid=56062

  1B. double-click the executable file to run the tool.

  2. after running the tool, click the Windows tab, and then click copy in the Clipboard.

  NB: You can open a new file in Notepad, paste the contents of the Clipboard in it & keep for future reference.

  3 start a new thread in the following forum and paste the results of the WGA diagnostic data in a post detailing the problem: http://social.microsoft.com/Forums/en-US/genuinewindowsxp/threads

  4 Troubleshooting specialist will analyze the data and recommend an appropriate solution.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I was only charged monthly fees, but I can't access to Indesign, please help.

  I was only charged monthly fees, but I can't access to Indesign, please help.

  Your subscription to cloud shows correctly on your account page?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  If you have more than one email, you will be sure that you use the right Adobe ID?

  .

  If Yes

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  .

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• I bought the lightroom 6 worked fine, now it used to open when I try to open the Dungeon of circle of color on spining and wont start, I work with mac, please help me, tried to shut down and restart, nothing works

  I bought the lightroom 6 worked fine, now it used to open when I try to open the Dungeon of circle of color on spining and wont start, I work with mac, please help me, tried to shut down and restart, nothing works?

  Try to hold the alt/option key while you restart Lightroom. Make sure that the right catalog file is selected and click on the "integrity test" box to see if there is a problem with the catalog file that might be repaired.

• I downloaded windows xp service pack 3 "Microsoft Download' site. But the file is corrupted. Please help me.

  I downloaded the full version of windows xp service pack 3 of the "Microsoft Downloads". But the file is corrupted. Please, help me to get windows xp service pack 3. where can I get Windows xp SP3?

  . Where can I get Windows xp SP3?

  Through these two articles:

  • Steps to take before you install Windows XP Service Pack 3

  • Windows XP SP3 - read all the prerequisites for a successful installation

  What offers Shenan Stanley is...

  1. Go to this web page: How to reset the Windows Update components? and use the Fix It utility in aggressive mode.

  2. Reset.

  3. Download here all the SP3 Setup file: Windows XP Service Pack 3 Package of Network Installation for developers and information technology professionals and save it to the Office of the administrator of the user account on the computer in question.

  4. Reset.

  5. Double-click the installation file downloaded in step 3 and follow the instructions.

  UTC/GMT is 04:44 Thursday, December 8, 2011

• I have a Canon Eos 6 d camera and Lightroom 5 and my Lightroom 5 could not detect and open a RAW file in my computer, please help me solve this problem

  I have a Canon Eos 6 d camera and Lightroom 5 and my Lightroom 5 could not detect and open a RAW file in my computer, please help me solve this problem

  Hi soewandichan,

  Please make sure that Lightroom is far, i.e. Lightroom 5.7.1.

  Also, please copy the images from the card, and then paste them into a folder on the desktop and then try and import them into Lightroom.

  Kind regards

  Tanuj

• Hello! I have to cancel my membership for the creative cloud plan but I find no different contact of live chat. I need TO cancel before March 22. Please help me!

  Hello! I have to cancel my membership for the creative cloud plan but I find no different contact of live chat. I need TO cancel before March 22. Please help me!

  This is an open forum, not the Adobe support... You need Adobe support to cancel a subscription

  -Start here https://forums.adobe.com/thread/1703848

  -or by phone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

  -as well as two links that can provide more details, if the links above don't help

  -http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html

• Data file associated with the application of deployment

  I have a file of data/database (~ 256 k) I would like to include with my application, but not as a resource file.

  I know that I can group as a resource, but I want to change the file because the application is used, so may not be part of the cod file.

  I am currently thinking of the deployment of the application without the data file, and then let the app to download the data file on first use, or as a background thread (in which I may have to provide some stupid message).  I hope not to make one of these.

  Instead, is it possible to deploy the application with a file that will be written in the memory of the device (file:///store) as 1 a download?  If this is not the case, what are some viable approaches to this problem.

  Maybe this:

  http://supportforums.BlackBerry.com/T5/Java-development/resource-Installer-to-SD-card-application-SA...

  Downloading in the app is I think a different approach (and that I took).

• I get an "Access denied" message when I try to get my mail Yahoo, only with Firefox, please help.

  Firefox is the best browser and my reasons and I thank you for the years of great service.
  However, yesterday I started to have an 'access denied' message when I login.
  It does not happen with Safari or Chrome, but I prefer Firefox, please help.

  Thank you

  Don Bancroft

  You are using a bookmark, or you start with the homepage (home) on this Web site?

  If you use a bookmark to open a specific page on the server and then try to navigate to this page from the home page or the page of connection Web site where this bookmark is currently suspended.

  Best is to avoid the bookmarking a specific page which has been achieved by sending POST data in a (hidden) form or bookmarking a page that contains the GET data added to the URL (? xxx = xxx) or links to a specific area in the case where load balancing is used because they can easily get broken if changes are made to the server.

• Microsoft installed IE 10 - don't work with Windows 7 - cant access Comcast email - please help!

  Auto Windows installed IE 10 - I have Windows 7. I can't access my Comcast e-mail. Comcast is giving instructions on how to fix, but I understand not all the 'jargon' I am a 52 YO who just wants to send and receive e-mail.  Please help... you'll be my favorite for the rest of 2013!

  Hi Lisa,

  Welcome to the Microsoft Community and thanks for posting the question.

  According to the description, it looks like you are facing a problem when accessing webmail using Internet Explorer 10.

  It would be great if you could answer these questions to help you further.

  1. is the issue limited only when accessing Comcast email?

  2. you receive an error message or error code?

  This issue could be due to the incorrect date and time on your PC settings may cause problems to access web mail servers.

  I would suggest trying the following methods and check if it helps.

  Method 1:

  To check the date and time, follow these steps:

  a. in the Control Panel, open Date and time. To do this, click StartCollapse this includes this image, type date and time in the search box, and then click Date and time in the list programs.

  b. click change date and time.

  c. the Date and time dialog box, set the date and time to the correct values.

  d. click OK twice.

  Method 2:

  I suggest you add Comcast e-mail as a trusted site and check if you are able to access.

  a. click on the "Start" menu, then click on "Internet Explorer" to start Internet Explorer.

  b. click on the "Tools" menu, then click on "Internet Options" to start the Internet Options dialog box.

  c. click the 'Security' tab and click 'Trusted Sites' and click the 'Sites '. A new dialog box launches. Type the complete URL of the site to add to the trusted sites list, and then click on 'Add '. Add as many URLs as you want.

  d. uncheck the "require server secure (https :) for all sites in this zone' check box and click 'OK' to save your changes. Click 'OK' to close the Internet Properties dialog box.

  Method 3:

  I suggest you to open Internet Explorer without modules.

  Manage Add-ons in Internet Explorer: http://windows.microsoft.com/en-IN/internet-explorer/manage-add-ons#ie=ie-10-win-7

  Method 4:

  If the problem persists, I suggest you to reset Internet Explorer default settings.

  Reset the Internet Explorer settings: http://windows.microsoft.com/en-IN/internet-explorer/change-ie-settings#ie=ie-10-win-7

  Note: The feature reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• What is the difference between the cat of the IR and IR data files in lightroom it please

  I have cat IR and IR data files in my backup. These two are big files of 500 MB, 900 MB respectively. My understanding is that these records did not contain real images but only thumbnails with the mods of lightroom. What is the difference between the cat of the IR and IR data files and should I make a second copy of both or the cat IR file

  The.lrcat is the file in your catalog. This is an important safeguard.

  The .lrdata files have previews. These can always be regenerated from the library, but it could take some time a large catalog.

  It is advisable to save them both. But if you are short on disk space, save the .lrcat file.

• need help with query-please help

  Hi all
  I want to convert the query to a view online below. I write examples of data that I used

  create table pde(empno number(10),act_hour varchar(10 byte));
   
  Table created
   
  insert into pde values(211,'12:20');
  insert into pde values(211,'06:00');
  insert into pde values(213,'07:00');
  insert into pde values(213,'07:20');
   
  WITH  got_total_hours     AS
  (
       SELECT SUM (   TO_NUMBER (SUBSTR (act_hour, 1, 2))
                  + ( TO_NUMBER (SUBSTR (act_hour, 4, 2))
                    / 60
                    )
                  ) AS total_hours  
       from      pde
   
  )
  SELECT        TO_CHAR (FLOOR (total_hours))
         || ':'
         || TO_CHAR ( MOD (total_hours, 1) * 60
                , 'fm00'
                 )     AS hh_mm,empno,act_hour
  FROM     got_total_hours ,pde
   
  this is the output i am getting  
   
  HH_MM  EMPNO  ACT_HOUR
  32:40     211     12:20
  32:40     211     06:00
  32:40     213     07:00
  32:40     213     07:20
  
  i tried changing the above query to an inline view given below
  SELECT        TO_CHAR (FLOOR (total_hours))
         || ':'
         || TO_CHAR ( MOD (total_hours, 1) * 60
                , 'fm00'
                 )     AS hh_mm,act_hour from(SELECT SUM (   TO_NUMBER (SUBSTR (act_hour, 1, 2))
                  + ( TO_NUMBER (SUBSTR (act_hour, 4, 2))
                    / 60
                    )
                  ) AS total_hours  
       from      pde)
  
  ORA-00904:''ACT_HOUR":invalid identifier

  Please help me
  thanking in advance
  Kind regards
  oracleuser
  
  Published by: makdutakdu on January 5, 2010 11:41

  Just push "with the clause" within the main request and give an alias of the table for him... something like

   SELECT TO_CHAR (FLOOR (total_hours))
    || ':'
    || TO_CHAR ( MOD (total_hours, 1) * 60 , 'fm00' ) AS hh_mm,
    empno                                                     ,
    act_hour
     FROM
    (SELECT SUM ( TO_NUMBER (SUBSTR (act_hour, 1, 2)) + ( TO_NUMBER (SUBSTR (act_hour, 4, 2)) / 60 ) ) AS total_hours
       FROM pde
    ) got_total_hours ,
    pde
  

  Ravi Kumar

• I have adobe first 10 items and I'm having some problems with it please help

  Here are the problems I am having with Adobe Premiere Elements 10:

  1 transitions won't load. The word loading will appear and it will not come to the top.

  2. the videos will not play smoothly. When I press on play skipps in a way he will not play smooth, making it very difficult to change.

  3 keeps closing on me. It will be something that comes up that says "Adobe premiere elements has stopped working and closes in the program. He does constantly.

  Please help me I don't know what's the problem with him.

  The first two numbers sound like a video driver issue.

  What is the make and model of your video/chip card?

  What is the installed video driver number and date?

  For the last number, it could be many things, including the video driver. I look over this ARTICLEand if there is nothing in the first part, then proceed to set up a computer in the second part of the OS. It would probably be a good time to publish the complete specifications. your computer and the images of your project and Source. Finally, the third part covers many of the troubleshooting tips and provides many links.

  Good luck

  Hunt